171
Child safety
"ISOFIX" mountings
Your vehicle has been approved in accordance
with the latest ISOFIX regulation.
-
a ring B behind the seat and identified by a
marking, referred to as the Top Tether for
fixing the upper strap.
-
pass the upper strap of the child seat
behind the seat backrest, between the
apertures for the head restraint rods,
fix the hook of the upper strap to the ring B,
tighten the upper strap.
The seats, represented below, are fitted with
regulation ISOFIX mountings:
-
-
When fitting an ISOFIX child seat to
the left hand rear seat, before fitting
the seat, first move the centre rear seat
belt towards the middle of the vehicle,
so as to avoid the seat interfering with
the operation of the seat belt.
There are three rings for each seat:
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
The ISOFIX child seats are fitted with two
latches which are secured on the two rings A.
Some seats also have an upper strap, known
as the Top Tether, which is attached to ring B.
-
two rings A, located between the vehicle
seat back and cushion, indicated by a
marking,
The incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
Follow strictly the fitting instructions provided
by with the child seat.
For information regarding the ISOFIX child
seats which can be installed in your vehicle,
refer to the table showing the locations for
installing ISOFIX child seats.
To secure the child seat to the TOP TETHER:
-
remove and stow the head restraint before
installing the child seat on the seat (refit it
once the child seat has been removed),
English 
