Storing driving positions
Storing a position
Recalling a stored position
Ignition on or engine running
Using buttons M / 1 / 2
Switch on the ignition.
Press button 1 or 2 to recall the
corresponding position.
An audible signal confirms that adjustment
is complete.
Adjust your seat and the door mirrors.
Press button M, then press button 1 or 2
within four seconds.
An audible signal indicates that the position
has been stored.
You can interrupt the current movement
by pressing button M, 1 or 2 or by using
one of the seat controls.
A stored position cannot be recalled
while driving.
System which registers the electrical settings
of the driver's seat and door mirrors. It enables
you to store and recall two positions using the
buttons on the side of the driver's seat.
Recalling stored positions is
deactivated 45 seconds after switching
off the ignition.
Storing a new position cancels the
previous position.
English 
