183
Safety
Seat belts
Front seat belts
The front seat belts are fitted with a
pretensioning and force limiting system.
This system improves safety in the front
seats in the event of a front or side impact.
Depending on the severity of the impact, the
pretensioning system instantly tightens the seat
belts against the body of the occupants.
The pretensioning seat belts are active when
the ignition is on.
The force limiter reduces the pressure of the
seat belt on the chest of the occupant,
so improving their protection.
Height adjustment
Seat belt not fastened /
unfastened warning lamp in
the instrument panel
To lower the attachment point, squeeze the
control A and slide it downwards.
To raise the attachment point, slide the
control A upwards.
When the ignition is switched on,
this warning lamp comes on in the
instrument panel if the driver and/
or the front passenger has not fastened their
seat belt.
Fastening
Pull the strap, then insert the tongue in the
buckle.
Check that the seat belt is fastened
correctly by pulling the strap.
From approximately 12 mph (20 km/h)
this warning lamp flashes for two minutes
accompanied by an audible signal of increasing
volume. Once these two minutes have elapsed,
this warning lamp remains on until the driver
and/or the front passenger fastens their seat
belt.
Unfastening
Press the red button on the buckle.
Guide the seat belt as it reels in.
English 
