Advertisement

Advertisement

Multifunction screens -> Colour screen and map for Your Citroen Ds4 SUV Second Generation (2021-2025)

Colour screen and map  
Displays in the screen  
Controls  
It displays the following information  
automatically and directly:  
From the navigation system control panel, to  
select one of the applications:  
For more information on these applications,  
refer to the "Audio and Telematics" section.  
-
-
-
-
time,  
date,  
altitude,  
)
press the dedicated "RADIO", "MUSIC",  
"NAV", "TRAFFIC", "PHONE" or  
"SETUP" button for access to the  
corresponding menu,  
turn the wheel A to select a function, an  
item in a list,  
ambient temperature (the value displayed  
flashes if there is a risk of ice),  
parking sensor information,  
audio functions,  
directory and telephone information,  
satellite navigation system information.  
)
-
-
-
-
)
or  
)
press button B to confirm the selection,  
press the "ESC" button to abandon the  
current operation and return to the previous  
display.  
 
67  
Multifunction screens  
"SETUP" menu  
Display conÞguration  
This menu is used to set the brightness of the  
screen, the screen colour scheme and the date  
and time.  
Voice synthesis  
This menu is used to adjust the volume for  
guidance messages and to select the type of  
voice (male or female).  
)
Press the "SETUP" button for access to its  
menu. You can choose from the following  
functions:  
-
-
"Display configuration",  
"Voice synthesis".  
For safety reasons, configuration of the  
multifunction screen by the driver must  
only be done when stationary.  
 
Central colour screen and instrument panel controls  
associated with the satellite navigation system  
Main menu  
)
Press thumb wheel 2 for access to the  
main menu and select one of the following  
functions:  
-
-
-
"Vehicle parameters",  
"Display adjustment",  
"Choice of sounds".  
)
)
Turn the thumb wheel 2 to move around in  
the central colour screen.  
Press the thumb wheel 2 again to confirm  
the selection.  
This group of controls allows:  
Controls  
-
when stationary, configuration of the  
vehicle, central screen and instrument  
panel parameters (driving and comfort  
systems, language, units, sounds...),  
when stationary and while driving,  
scrolling the active functions available  
(trip computer, navigation-guidance...).  
There is a button and a thumb wheel to control  
the central colour screen in the instrument  
panel:  
1. button on the end of the wiper stalk:  
run through the various active functions  
available.  
The main menu and its associated  
functions can only be accessed when  
stationary.  
A message appears in the central  
colour screen, above a certain speed  
threshold, indicating that the main  
menu cannot be displayed.  
-
2. thumb wheel on the left of the steering  
column,  
-
rotation (other than menu): scroll through  
the list of active functions available,  
press: main menu, confirm the selection,  
rotation (in a menu): move up or down in  
the menu.  
-
-
 
69  
Multifunction screens  
Vehicle parameters  
Display conÞguration  
This menu is used to activate or deactivate  
certain driving and comfort systems, classified  
in different categories:  
This menu is used to configure:  
-
the display language of the central colour  
screen, from a pre-defined list,  
-
"Access to the vehicle"  
(see "Access" section):  
"Plip action" (Selective unlocking of the  
driver's door),  
-
the units: temperature (°Celsius ou  
°Fahrenheit) and fuel consumption  
(l/100 km, mpg or km/l),  
-
the colour schemes of the central screen.  
"Unlocking only boot"  
(Selective unlocking of the boot).  
"Driving assistance":  
-
"Parking brake automatic" (Automatic  
electric parking brake; see "Driving"  
section),  
"Rear wipe in reverse gear" (Rear wiper  
coupled to reverse gear; see "Visibility"  
section),  
"Speeds memorised" (Memorising  
speeds; see "Driving" section).  
"Vehicle lighting" (see "Visibility" section):  
"Directional headlamps" (Main/additional  
directional lighting),  
Choice of sounds  
This menu allows you to choose a family of  
polyphonic sounds from the four available.  
These sounds are grouped together in a family  
and are adapted to suit the situation and  
context (alert, confirmation, rejection, direction  
indicators, lighting left on, key in ignition...).  
-
-
"Daytime lights" (Daytime running  
lamps).  
"Interior lighting" (see "Visibility" section):  
"Follow-me-home " (Automatic timed  
operation of headlamps),  
"Welcome lighting" (Interior/exterior  
welcome lighting).