123
Visibility
Daytime running lamps
Manual controls
The lighting commands are issued directly
by the driver by means of the ring A and the
stalk B.
Daytime lighting, compulsory in certain
countries, which comes on automatically when
the engine is started making the vehicle more
visible to other users.
A. Main lighting mode selection ring: turn it
to position the symbol required facing the
mark.
This function is assured:
-
-
in countries where it is imposed by
regulations,
by illumination of the dipped beam
headlamps associated with illumination of
the sidelamps and number plate lamps; this
function cannot be deactivated.
for other countries where it is provided,
by illumination of dedicated lamps
associated with illumination of the
sidelamps and number plate lamps; this
function can be activated or deactivated via
the vehicle configuration menu.
Lamps off.
Sidelamps (luminous signature).
Automatic illumination of headlamps.
Sidelamps.
Model without AUTO lighting
Dipped headlamps or main beam
headlamps.
B. Stalk for switching headlamps: pull the stalk
towards you to switch the lighting between
dipped and main beam headlamps.
In the lamps off and sidelamps modes, the
driver can switch on the main beam headlamps
temporarily ("headlamp flash") by maintaining a
pull on the stalk.
The lighting control must be in position "0" or
"AUTO" (day mode).
The instruments and controls (multifunction
screen, air conditioning control panel, ...) are
not illuminated, except in night mode with
manual or automatic illumination of headlamps.
Displays
Illumination of the corresponding indicator
lamp in the instrument panel confirms that the
lighting selected is on.
Model with AUTO lighting
English 
