Get Comfort Guide for Citroen Ds5 SUV First Generation (2011-2018)

003

Comfort

Front seats

Manual

1. Adjustments to the height and angle of

the head restraint

To raise it, pull upwards.

To lower it, press on the lug and the head

restraint at the same time.

2. Adjustment of the backrest angle

Turn the wheel to adjust the angle of the

backrest.

3. Adjustment of the seat height

Raise or lower the control lever the number

of times required to obtain the desired

position.

4. Forwards-backwards adjustment of

the seat position

Lift the control bar and slide the seat

forwards or backwards.

5. Adjustment of the driver's lumbar

support

Turn the wheel to obtain the desired level

of lumbar support.

Before moving the seat backwards, ensure that there is nothing that might prevent the full

travel of the seat, so as to avoid the risk of of jamming the seat caused by the presence of

objects on the floor behind the seat or rear passengers. If the seat jams, stop the movement

immediately.

73

Comfort

Electric

1. Adjustment of the seat cushion angle

and height, and forwards-backwards

adjustment

F Raise or lower the front of the control

to adjust the seat cushion angle.

F Raise or lower the rear of the control

to raise or lower the seat.

F Simultaneously raise or lower the

front and rear of the control in order

to raise or lower the entire seat.

2. Adjustment of the backrest angle

Move the control forwards or backwards to

adjust the backrest angle.

3. Adjustment of driver's lumbar

support

Press the control switches to obtain

the desired level of lumbar support.

4. Manual adjustment of the cushion

Pull on the grip to adjust the length of

the cushion.

Before moving the seat backwards, ensure that there is

Switch on the ignition or start the engine if the vehicle has gone into

economy mode.

The electric functions of the driver's seat are active for about 45 seconds

after opening the front door. They are deactivated about 45 seconds after

switching off the ignition and in economy mode.

nothing that might prevent the full travel of the seat, so as to

avoid the risk of of jamming the seat caused by the presence

of objects on the floor behind the seat or rear passengers.

If the seat jams, stop the movement immediately.

To reactivate them, switch on the ignition.

Storing driving positions

Storing a position using

buttons M / 1 / 2

Recalling a stored position

F

Briefly press button 1 or 2 to recall the

F

Switch on the ignition.

corresponding position.

An audible signal indicates the end of the

adjustment.

Adjust your seat and the head-up display.

Press button M, then press button 1 or 2

within four seconds.

An audible signal indicates that the position

has been stored.

Storing a new position cancels the previous

position.

System which stores the electrical settings

of the driver's seat and the head-up display

settings. It enables you to store up to

two positions using the buttons on the side

of the driver's seat.

You can interrupt the current movement

by pressing button M, 1 or 2 or by using

one of the seat controls.

A stored position cannot be recalled

while driving.

Recalling stored positions is

deactivated 45 seconds after switching

off the ignition.

75

Comfort

Head restraint height and

angle adjustment

The head restraint is fitted with a frame

with notches which prevents it from

lowering; this is a safety device in case

of impact.

The adjustment is correct when the

upper edge of the head restraint is

level with the top of the head.

Never drive with the head restraints

removed; they must be in place and

adjusted correctly.

F

To raise a head restraint, pull it upwards.

To remove the head restraint, press the

lug A and pull the head restraint upwards.

To put the head restraint back in place, engage

the head restraint stems in the openings

keeping them in line with the seat back.

To lower the head restraint, press the lug A

and push down on the head restraint at the

same time.

F

To adjust the angle of the head restraint, tilt

its lower part forwards or rearwards.

Heated seats control

Massage function

Activation

F

Press this switch.

Its indicator lamp comes on and the massage

function is activated for a period of 1 hour.

During this time, massage is performed in

6 cycles of 10 minutes (6 minutes of massage

followed by 4 minutes break).

After one hour, the function is deactivated, the

indicator lamp goes off.

F

Use the adjustment wheel to switch on and

select the level of heating required:

This system provides a back massage. It only

operates when the engine is running or in

STOP mode of the Stop & Start system.

0: Off.

deactivation

1: Low.

2: Medium.

3: High.

You can deactivate the massage

function at any time by pressing this

switch, its indicator lamp goes off.

With the engine running, the front seats can be

heated separately.

77

Comfort

Rear seats

Bench seat with split cushion and backrest (left hand 2/3, right hand 1/3) which can be folded individually to adapt the load space in the boot.

Folding the cushion and

backrest

F

Lift the cushion 1 by hand, lifting from

the rear.

F

Pull control 3 forwards to release the seat

back 4.

Fold the seat backrest 4.

F

Move the corresponding front seat forward

if necessary.

Place the head restraints in the low

position or remove them.

Remove the seat belt from its guide.

F

Tip the seat cushion 1 fully against the

front seat.

Keep the seat belt guide 2 held against

the vehicle.

Repositioning the seat

backrest and cushion

F

Keep the seat belt guide 2 held against the

vehicle to avoid trapping the seat belt when

repositioning the seat.

F

Reposition the cushion 1.

Release the seat belt guide 2.

Put the seat belt back in place in the guide.

When repositioning the seat backrest,

take care not to trap the seat belts.

F

Straighten the seat back 4 while refitting

the head restraints and secure it.

Check that the red indicator, located next to

the control 3, is no longer visible.

79

Comfort

Removing the seat cushion

Rear head restraints

These have one position for use (up) and a

stowed position (down).

They can also be removed.

F

Remove the seat cushion 1 from its fixings

by pulling upwards.

Never drive with the head restraints

removed; they must be in place and

correctly adjusted.

To remove a head restraint:

Refitting the seat cushion

F

release the backrest using control 1,

tilt the backrest 2 slightly forwards,

pull the head restraint upwards to the stop,

then, press the lug A.

Position the seat cushion 1 vertically in its

fixings.

Mirrors

door mirrors

Folding

Automatic: lock the vehicle using the

electronic key.

Manual: with the ignition on, move

control A downwards.

If the mirrors are folded using control A,

they will not unfold when the vehicle is

unlocked.

Adjustment

As a safety measure, the mirrors should

be adjusted to reduce the blind spot.

F

Turn control A to the right or to the left to

Unfolding

Automatic: unlock the vehicle using the

electronic key.

select the corresponding mirror.

Move control A in all four directions to

adjust.

Manual: with the ignition on, move

control A upwards.

demisting - defrosting

Return control A to the central position.

Demisting-defrosting of the door

mirrors operates by switching on

the heated rear screen.

The mirrors can be folded manually if

necessary.

The objects observed are, in reality,

closer than they appear.

Take this into account in order to

correctly judge the distance of vehicles

approaching from behind.

For more information, refer to the "Rear screen

and door mirrors demist-defrost" section.

The folding and unfolding of the door

mirrors using the electronic key can be

deactivated by a CITROËN dealer or a

qualified workshop.

Fold the mirrors when putting your

vehicle through an automatic car wash.

The rear screen demist - defrost

can only operate when the engine is

running.

81

Comfort

Steering wheel adjustment

Rear view mirror

Seeing clearly

Adjustable mirror providing a central rearward

view.

Equipped with an anti-dazzle system, which

darkens the mirror glass and reduces the

nuisance to the driver caused by the sun,

headlamps from other vehicles...

Automatic day/night model

F

When stationary, pull the control lever to

release the adjustment mechanism.

Adjust the height and reach to suit your

driving position.

Push the control lever to lock the

adjustment mechanism.

For better rear vision, align the bottom of the

rear view mirror with the bottom of the rear

screen.

In order to ensure optimum visibility

during your manoeuvres, the mirror

lightens automatically when reverse

gear is engaged.

By means of a sensor, which measures the

light from the rear of the vehicle, this system

automatically and progressively changes

between the day and night uses.

As a safety measure, these operations

should only be carried out with the

vehicle stationary.

Front ﬁttings

1. Glove box

2. Storage

3. Storage (according to version)

4. Ticket holder (according to version)

5. Removable ashtray / 12 v accessory

socket (120 W)

Press the lid to open the ashtray.

To empty the ashtray, remove it by pulling it

upwards.

6. centre armrest and storage

It is illuminated, cooled and contains

storage spaces (1.5 litre bottle, ...).

7. USB Player

8. 12 v accessory socket (120 W)

Observe the maximum power rating to

avoid damaging your device.

9. door panel with cup holder

83

Comfort

cigarette lighter /

12 v accessory socket

F

To use the cigarette lighter, press it in

and wait a few seconds until it pops out

automatically.

To connect a 12 V accessory (max power:

120 W), remove the cigarette lighter and

connect a suitable adaptor.

The connection of an electrical device

not approved by CITROËN, such as a

USB charger, may adversely affect the

operation of vehicle electrical systems,

causing faults such as poor telephone

reception or interference with displays

in the screens.

You can use this socket to connect a telephone

charger, a bottle warmer...

After use, put the cigarette lighter back into

place straight away.

Mats

Reﬁtting

To refit the mat on the driver's side:

F

position the mat correctly,

refit the fixings by pressing,

check that the mat is secured correctly.

To avoid any risk of jamming of the

pedals:

-

only use mats which are suited to

the fixings already present in the

vehicle; these fixings must be used,

never fit one mat on top of another.

Fitting

To fit the mat on the driver's side:

F

move the seat fully back,

fit the mat in place,

engage the fixings by pressing down on them.

-

The use of mats not approved by

CITROËN may interfere with access to

the pedals and hinder the operation of

the cruise control / speed limiter.

Removal

To remove the mat on the driver's side:

F

move the seat fully back,

disengage the fixings, leaving the fixing

pins in the floor carpet,

F

remove the mat.

85

Comfort

centre armrest

USB Player

When connected to the USB port, the

portable device charges automatically.

While charging, a message is displayed

if the power consumption of the

portable device exceeds the current

delivered by the vehicle.

The USB port also allows a telephone to be

connected by MirrorLink™ or CarPlay^®, so that

certain applications on the telephone can be

used in the touch screen.

It contains two storage compartments.

This connection box comprises a USB port and

a Jack auxiliary socket.

Storage compartments

USB port

Jack auxiliary socket

F

For access to the large compartment,

press button 1 then raise the cover.

For access to the small compartment

(below the armrest cover) press button 2

then raise the cover.

The USB port allows the connection of a

portable device, such as a digital audio player

of the iPod^®type or a USB memory stick.

The USB player reads your audio files, which

are transmitted to your audio system and

played via the vehicle's speakers.

The Jack auxiliary socket allows the connection

of a portable device, such as a digital audio

player, so that your audio files can be heard

through the vehicle's speakers.

The management of these files is from the

portable device.

F

The large compartment houses a USB port and

a Jack auxiliary socket. It also houses an air

vent (adjustable for flow) that delivers cooled

air.

The management of these files is from the

steering mounted controls or the audio system.

For more information, refer to the

corresponding part of the "Audio and

telematics" section.

Rear ﬁttings

Rear armrest

Ski flap

It allows long objects to be carried in the vehicle.

F

Lower the rear armrest for a more

comfortable position.

It may be fitted with cup holders and also gives

access to the ski flap.

Opening

F

Lower the armrest.

Press the flap opening control.

Lower the flap.

Load the objects from inside the boot.

Do not leave the flap open when not

carrying long objects in the vehicle.

87

Comfort

Boot ﬁttings

1. Rear shelf

It can be removed when carrying large

objects.

2. Bag hooks

3. Stowing rings

4. Warning triangle retaining straps

Warning triangle (stowing)

Use the straps on the interior boot trim to stow

the folded triangle or its storage box.

Placing the triangle on the road

Place the triangle behind the vehicle, as

required by the legislation in force in your

country.

89

Comfort

Heating and Ventilation

System which creates and maintains good

conditions of comfort and visibility in the

vehicle's passenger compartment.

controls

The incoming air follows various routes

depending on the controls selected by

the driver, the front passenger and rear

passengers.

The temperature control enables you to obtain

the level of comfort required by mixing the air of

the various circuits.

The air distribution control enables you to

select the air vents used in the passenger

compartment by the combined use of the

associated buttons.

The air flow control enables you to increase or

reduce the speed of the ventilation fan.

These controls are grouped together on control

panel A on the centre console.

Air distribution

1. Windscreen demisting/defrosting vents.

2. Front side quarter light window demisting/

defrosting vents.

5. Air outlets to the driver and front passenger

footwells.

6. Adjustable air vents for the rear

passengers.

3. Side adjustable air vents.

4. Central adjustable air vents.

7. Air outlets to the rear footwells.

Recommendations for ventilation and air conditioning

In order for these systems to be fully effective, follow the operation and maintenance

guidelines below:

If after an extended stop in sunshine,

the interior temperature is very high, first

ventilate the passenger compartment for

a few moments.

Put the air flow control at a setting high

enough to quickly change the air in the

passenger compartment.

The air conditioning system does not

contain chlorine and does not present

any danger to the ozone layer.

F

To obtain an even air distribution, take care not to obstruct the exterior air intake grilles

located at the base of the windscreen, the nozzles, the vents and the air outlets, as well

as the air extractor located in the boot.

F

Do not cover the sunshine sensor, located on the dashboard; this is used for regulation

of the digital air conditioning system.

Operate the air conditioning system for at least 5 to 10 minutes, once or twice a month

to keep it in perfect working order.

Ensure that the passenger compartment filter is in good condition and have the filter

elements replaced regularly (refer to the "Checks" section).

We recommend the use of a combined passenger compartment filter. Thanks to its

special active additive, it contributes to the purification of the air breathed by the

occupants and the cleanliness of the passenger compartment (reduction of allergic

symptoms, bad odours and greasy deposits).

The condensation created by the air

conditioning results in a discharge

of water under the vehicle which is

perfectly normal.

F

To ensure correct operation of the air conditioning system, you are also advised to have

it checked regularly as recommended in the maintenance and warranty guide.

If the system does not produce cold air, switch it off and contact a CITROËN dealer or a

qualified workshop.

You can switch off the air conditioning (AC button) and stay in Automatic mode in order

to limit fuel consumption. If misting appears while in this mode, you can switch the air

conditioning back on temporarily to improve the situation.

When towing the maximum load on a steep gradient in high temperatures, switching off the

air conditioning increases the available engine power and so improves the towing ability.

If you want to prioritise heating, start

and leave the engine running by

pressing ECO OFF.

91

Comfort

Dual-zone digital air conditioning

Automatic operation

When the engine is cold, the air

flow will reach its optimum level

progressively, taking account of the

weather and the desired comfort level

so as to avoid too great a distribution

of cold air.

On entering the vehicle, if the interior

temperature is much colder or warmer

than the comfort value, there is no

need to change the value displayed in

order to obtain the comfort required. In

all seasons, with the windows closed

the system corrects the difference

in temperature automatically and as

quickly as possible.

1. Automatic comfort programme

We recommend the use of one of

the three AUTO modes available:

they provide optimised regulation of

the temperature in the passenger

F

Press the "AUTO" button repeatedly:

-

a first indicator lamp comes on; the "low"

setting mode is selected,

a second indicator lamp comes on; the

"medium" setting mode is selected,

a third indicator lamp comes on; the

"high" mode setting is selected.

compartment according to the comfort value

that you have chosen.

These three modes automatically control the

system, according to the desired setting, while

also maintaining the desired comfort value.

Use the "medium" and "high" settings in

preference to maintain the comfort level at the

rear.

This system is designed to operate effectively

in all seasons, with the windows closed.

Manual operation

If you wish, you can make a different choice

from that offered by the system by changing a

setting. The "AUTO" indicator lamps go off; the

other functions, except the air conditioning, will

still be controlled automatically.

4. Automatic visibility

programme

2-3. driver's-passenger's side

settings

The driver and front passenger can

each adjust the temperature to their

requirements.

For more information on the

automatic visibility programme,

refer to the corresponding section

in "Front demisting - defrosting".

F

Pressing the "AUTO" button returns the

system to completely automatic operation.

The value indicated on the display corresponds

to a level of comfort and not to a temperature in

degrees Celsius or Fahrenheit.

F

Turn control 2 or 3 to the left or to the right

respectively to decrease or increase this

value.

For maximum cooling or heating of the

passenger compartment, it is possible

to exceed the minimum value 14 or the

maximum value 28.

With Stop & Start, when demisting has

been activated, the STOP mode is not

available.

A setting around the value 21 provides

optimum comfort. However, depending on your

requirements, a setting between 18 and 24 is

normal.

F

Turn control 2 or 3 to the left until

"LO" is displayed or to the right

until "HI" is displayed.

You are advised to avoid a left / right setting

difference of more than 3.

93

Comfort

5. Air conditioning

On / Off

6. Air distribution adjustment

8. Air intake / Air recirculation

Interior air recirculation enables the passenger

compartment to be isolated from exterior

odours and smoke when external pollution is

detected.

It is activated automatically on operation of the

screenwash.

It is inactive when the ambient temperature is

below 5 °C to avoid the risk of misting in the

vehicle.

F

Press this button to switch off

the air conditioning.

F

Press one or more buttons to

direct the air flow towards:

-

the windscreen and side

windows,

the outer and centre air

vents,

Switching the system off could result in

discomfort (humidity, condensation).

the footwells.

F

Press this button again to return to

automatic operation of the air conditioning.

The indicator lamp in the "A/c" button

comes on.

You can combine the three orientations to

obtain the desired air distribution.

-

The indicator lamp "with "A" on

indicates that recirculation is

controlled automatically.

The indicator lamp "without A"

on indicates that recirculation is

forced manually.

To obtain cool air more quickly, you can

use recirculation of the interior air for a

few moments. Then revert to the intake of

exterior air.

7. Air ﬂow adjustment

F

Turn this control to the left to

decrease the air flow or to the

right to increase the air flow.

Both indicator lamps off

indicates that recirculation is

controlled automatically without

taking account of the detection

of pollution.

The air flow indicator lamps, between the two

fans, come on progressively in relation to the

value requested.

Avoid prolonged operation in interior

air recirculation mode or driving for

long periods with the system off (risk of

condensation and deterioration of air

quality).

Switching the system off

F

Turn the air flow control to the

left until all of the indicator

lamps go off.

9. Maximum air conditioning

F

If you want to quickly cool

the air in the passenger

compartment, press this button;

"LO" is displayed.

This action switches off the air conditioning and

the ventilation.

Temperature related comfort is no longer

assured but a slight flow of air, due to the

movement of the vehicle, can still be felt.

To return to the previous settings, press the

button again.

F

Modify the settings (temperature, air flow

or air distribution) or press the "AUTO"

button to reactivate the system with the

values set before it was switched off.

95

Comfort

Front demist -

defrost

Rear screen and door mirrors demist -

defrost

Automatic visibility programme

Switching on

F

Press this button (located on

the air conditioning system

control panel) to demist/defrost

the rear screen and the door

mirrors. The indicator lamp

associated with the button

comes on.

F

Switch off the demisting/defrosting

F

Select this programme

to demist or defrost the

windscreen and side windows

as quickly as possible.

of the rear screen and door mirrors

as soon as appropriate, as lower

current consumption results in

reduced fuel consumption.

The system automatically manages the air

conditioning, air flow and air intake, and provides

optimum distribution towards the windscreen and

side windows.

F

To stop the programme, press either

Switching off

The rear screen demist - defrost

can only operate when the engine is

running.

the "visibility" button again or "AUTO", the

indicator lamp in the button goes off and the

indicator lamp in the "AUTO" button comes on.

The demisting/defrosting switches off automatically

to prevent an excessive consumption of current.

The system starts again with the values in use

before it was overridden by the visibility programme.

F

It is possible to stop the

demisting/defrosting operation

before it is switched off

automatically by pressing the

button again. The indicator

lamp associated with the

button goes off.

With Stop & Start, when demisting has

been activated, the STOP mode is not

available.

Comfort for Your Citroen Ds5 SUV First Generation (2011-2018)

Related Topics

Popular Owner Manuals

Latest Owner Manuals