127
Driving
Activation / deactivation
Brightness adjustment
We recommend that adjustments are
only made using these buttons when
the vehicle is stationary.
When stationary or while driving, no
objects should be placed around the
transparent blade (or on its cover) to
avoid blocking deployment of the blade
and preventing its correct operation.
In certain extreme weather conditions
(rain and/or snow, bright sunshine, ...)
the head-up display may not be legible
or may suffer temporary interference.
Some sunglasses may hamper reading
of the information.
To clean the transparent blade, use a
clean, soft cloth (such as a spectacles
cloth or microfibre cloth). Do not use
a dry or abrasive cloth or detergent or
solvent products as these could scratch
the blade or damage the anti-reflection
coating.
F
With the engine running, press button 1. The
activated/deactivated status when the engine was
switched off is retained when the engine is switched
on again.
F
With the engine running, adjust the
brightness of the information using
button 3:
-
towards the rear to increase the
brightness,
The blade retracts automatically 3 seconds after switching
off the engine except in STOP mode of Stop & Start.
-
towards the front to decrease the
brightness.
Height adjustment
F
With the engine running, adjust the display
to the required height using button 2:
-
-
towards the rear to move the display up,
towards the front to move the display
down.
English 
