219
Practical information
Changing a fuse
Access to tooling
changing a fuse
Before changing a fuse, it is necessary to:
F
identify the cause of the failure and
correct it,
F
F
switch off all electrical consumers,
immobilise the vehicle and switch off the
ignition,
F
identify the failed fuse using the allocation
tables and diagrams presented on the
following pages.
Good
Failed
The fuse extraction tweezer is fitted to the back
of the dashboard fusebox cover.
For access to it:
To remove or fit a fuse, it is essential to:
F
use the special tweezer to extract the fuse
from its housing and check the condition of
its filament.
F
remove the cover completely and turn it
Tweezer
over,
F
always replace the failed fuse with a fuse
of the same rating (same colour); a fuse of
different rating could cause a fault (risk of
fire).
F
remove the tweezer.
If the fault recurs after replacing a fuse, have
the electrical system checked by a CITROËN
dealer or a qualified workshop.
The replacement of a fuse not
mentioned in the tables below could
cause a serious malfunction of your
vehicle. Contact a CITROËN dealer or a
qualified workshop.
English 
