Get Technology on board Guide for Citroen Relay Van 2014-2024

Mirrors and windows

Electrical controls

The ignition switch must be in the MAr

position.

Turn the control to select the mirror zone.

1 Driver's mirror:

MIrrOrS

rear view mirror

door mirrors

A1 - Upper mirror

B1 - Lower mirror

The lever located on the lower edge moves

the mirror into two positions.

These are divided into two zones:

A - Upper mirror

Then move the control in the direction of the

adjustment required.

For the day position, the lever is pushed.

B - Lower mirror

2 Passenger mirror:

A2 - Upper mirror

B2 - Lower mirror

For the night position to prevent dazzle, pull

the lever towards you.

The mirror glass is spherical in order to

widen the lateral field of vision. Objects

seen in the mirror are in reality closer than

they appear. Therefore, this must be taken

into account in order to assess the distance

correctly.

Then move the control in the direction of the

adjustment required.

Electric folding

The shell incorporates the direction indicator

side repeater and the aerials, according to

the equipment available on board (GPS,

GSM, Radio, ...).

Press this control.

defrosting the mirrors

Press the rear screen defrosting

button.

Mirrors and windows

Manual operation

Press or pull control switch A/B, without

passing the point of resistance.

The window stops when you release the

control switch.

Good practice

Always remove the key from the ignition

when leaving the vehicle, even for a short

time.

If the electric windows meet an obstacle

during operation, you must reverse the

movement of the window. To do this, press

the control switch in question.

When the driver operates the passenger

electric windows, they must ensure that

no one is preventing correct closing of the

windows.

You have two options:

ELEctrIc WIndOWS

The driver must ensure that the passengers

use the electric windows correctly.

A. driver's electric window

Automatic operation

B. Passenger's electric window

Press or pull control switch A, beyond the

point of resistance: the window opens or

closes fully when the control is released.

Be particularly aware of children when

operating the windows.

Pressing the control switch again stops the

movement of the window.

3

Vehicle configuration

PErSOnALISAtIOn - cOnFIGurAtIOn

this MOdE button enables you to:

-

access the menus and sub-menus,

confirm your selections, within a

menu,

-

quit the menus.

A long press takes you back to the

home screen.

using the MOdE control panel

this button enables you to:

This control panel located alongside the

steering wheel provides access to menus for

the personalisation of some of the vehicle

systems.

You have access to all the menus if your

vehicle is fitted with an audio system.

-

scroll up through a menu,

increase a value.

If your vehicle is fitted with a touch screen

audio system, certain menus are only

accessible using the audio system control

panel.

The corresponding information appears in

the instrument panel screen.

Eleven languages are offered: Brazilian,

Dutch, English, French, German, Italian,

Polish, Portuguese, Russian, Spanish and

Turkish.

this button enables you to:

As a safety measure, some menus can

only be accessed when the ignition is off.

-

scroll down through a menu,

decrease a value.

Vehicle configuration

confirm

and quit

Menu...

Press...

Sub-menu…

Press...

Select…

Increase

Enables you to...

ON

Activate / Deactivate the audible

signal indicating exceeding of

the programmed speed and

select the speed.

1

Speed

beep

Decrease

OFF

Increase

Decrease

Activate

Deactivate

Activate

Deactivate

Increase

Decrease

24

2

3

Headlamp

sensor

Set the sensitivity of the

sunshine sensor (1 to 3).

Activation

Trip B

Display a second distance

"Trip B".

Activate / Deactivate the reading

of traffic signs.

4

5

Traffic Sign

Hours/Minutes

Set the clock.

Setting the

time

Time format

Select the clock display mode.

Set the date.

12

Activate

Deactivate

6

7

Setting the

date

Year/Month/

Day

Activate / Deactivate automatic

door locking above approx

12 mph (20 km/h)

ON

Autoclose

While moving

OFF

4

Vehicle configuration

confirm

and quit

Menu…

Press...

Sub-menu…

Distance

Fuel

Press...

Select…

Enables you to...

Km

Select the distance display unit.

Miles

km/l

8

Measurement

Select the fuel consumption

unit (Unit)

consumption

display unit.

l/100 km

°C

°F

Select the temperature display

unit.

Temperature

List of

9

Languages

languages

available

Select the display language.

Increase

10 Volume of

announcements

Increase / Decrease the volume

of the announcements or of the

audible warning.

(Buzz)

Decrease

Service (Miles/

km before

service)

Display the miles/kilometres

remaining before the next

service.

11 Service

Oil (Miles/

Km before oil

change)

Display the miles/kilometres to

the next oil change

Vehicle configuration

confirm

and quit

Menu…

Press...

Sub-menu...

Press...

Select...

Allows you to...

ON

12 Daytime

running lamps

Activate / Deactivate daytime

running lamps.

OFF

13 Automatic

headlamp

dipping

ON

Activate / Deactivate automatic

headlamp dipping.

OFF

Yes

No

ON

Activate the passenger airbag.

14 Passenger

airbag

Yes

No

(BAG P)

OFF

Deactivate the passenger airbag.

Quit the menu.

15 Quit menu

Press the arrow at the bottom to

go to the first menu.

4

Vehicle configuration

This control panel button gives

access to the "Settings" menu.

"Settings" menu

1. "Display".

2. "Voice commands".

3. "Time and Date".

4. "Safety / Help".

5. "Lighting".

This button in the screen allows

you to go up a level in a menu or

increase a value.

6. "Doors & locking".

7. "Audio".

8. "Telephone / Bluetooth".

9. "Radio settings".

This button in the screen allows

you to go down a level in a menu

or decrease a value.

10. "Restore Settings" to return to factory

settings.

11. "Del. pers. data" to delete all of your

personal data, related to the Bluetooth

equipment in the audio system.

using the touch screen audio

system

This audio system control panel, located in

the middle of the dashboard, gives access to

personalisation menus for certain systems.

For more information on the audio

system, the telephone, the radio and the

navigation system, the sub-menus 2, 7,

8, 9 and 11 are described in detail in the

"Audio and telematics" section.

The corresponding information appears in

the touch screen.

Nine languages are offered: Dutch, English,

French, German, Italian, Polish, Portuguese,

Spanish and Turkish.

The settings for sub-menus 4, 5 and

6 vary according to the equipment

installed on the vehicle.

As a safety precaution, some menus

can only be accessed when the ignition

is off.

Vehicle configuration

From the "Display" sub-menu, you can:

From the "Safety / Help" sub menu, you can:

From the "Doors & locking" sub-menu, you

can:

-

select "Languages" and choose one of

the languages listed above,

-

select "Parkview Camera", then

"Reversing camera" to activate or

deactivate its use (On, Off),

-

select "Autoclose" to activate or

deactivate its use (On, Off).

-

select "Units of measurement" to

choose the units for fuel consumption

(l/100 km, mpg), distance (miles, km)

and temperature (°C, °F),

-

select "Parkview Camera", then

"Camera delay" to activate or deactivate

the maintaining of the display for

10 seconds or up to 11 mph (18 km/h)

(On, Off),

-

select "Display Trip B" to switch trip B

On or Off in the trip computer.

-

select "Traffic Sign" to activate or

deactivate its use (On, Off),

select "Passenger airbag" to activate or

deactivate its use (On, Off).

From the "Time and Date" sub-menu, you

can:

-

select "Adjust time and format" to set the

hour, minutes and seconds and choose

the format (24 h, 12 h with am or pm),

From the "Lighting" sub-menu, you can:

-

select "Daytime running lamps" to

activate or deactivate their use (On, Off),

-

select "Adjust Date" to set the day,

month and year.

select "Auto headlamp dipping" to

activate or deactivate its use (On, Off),

To set the time manually, "Synch Time"

must be Off.

select "Headlamp sensor" to adjust its

sensitivity (1, 2, 3).

4

Vehicle data

trIP cOMPutEr

The trIP button, located at the end of the

wiper control stalk, gives access to the

following information:

-

distance A

-

Average speed A

This indicates the distance travelled

since the last trip computer zero reset.

This is the average speed calculated

since the last trip computer zero reset

(with the ignition on).

-

range

Average fuel consumption A

This indicates the distance that can still

be travelled with the fuel remaining in

the tank on the basis of the average

consumption over the last few miles

(kilometres) travelled.

trip duration A

This is the average quantity of fuel

consumed since the last trip computer

zero reset.

This indicates the total time since the

last trip recorder zero reset.

-

current fuel consumption A

If TRIP B is activated in the MOdE menu:

This is the average quantity of fuel

consumed during the last few seconds.

-

Distance B

Average fuel consumption B

Average speed B

Trip duration B

Vehicle data

tAcHOGrAPH

If your vehicle is fitted with a tachograph,

this permits storing of all of the data relating

to the vehicle in the unit and on a card

inserted in it.

When the card is inserted, all of the data

can be:

For further information, refer to the

documents supplied by the manufacturer of

the tachograph.

-

displayed on the tachograph screen,

printed,

If your vehicle is fitted with a

tachograph, disconnection of the

negative (-) terminal of the battery (located

under the floor on the left-hand side, in the

cab) is recommended if the vehicle is not to

be used for a period of more than 5 days.

Example: at the beginning of each journey

or change of team.

transferred to external storage media via

an interface.

4

Parking sensors

AudIBLE rEAr PArKInG SEnSOrS

If fitted on your vehicle, the system consists

of four proximity sensors, installed in the

rear bumper.

Operation

Operating fault

Engage reverse gear with the gear lever.

If this warning lamp comes

on in the instrument panel

accompanied by a message in

the screen, contact a CITROËN

dealer or a qualified workshop.

The proximity information is indicated by an

audible signal of increasing frequency as the

vehicle approaches the obstacle.

They detect any obstacle: person, vehicle,

tree, fence, behind the vehicle during the

manoeuvre.

When the distance between the rear of

the vehicle and the obstacle is less than

approximately thirty centimetres, the audible

signal becomes continuous.

However, objects the size or thickness of

which are detected at the beginning of the

manoeuvre will no longer be detected at the

end of the manoeuvre: blind spots between

and below the sensors. Examples: stake,

roadworks cone or pavement post.

Good practice

The system cannot, in any circumstances,

replace the need for vigilance on the part of

the driver.

Switching off

Take even greater care if you reverse with a

rear door open.

The rear parking sensor system may be

coupled with a reversing camera.

Come our of reverse gear into neutral.

In bad weather or in winter, ensure that the

sensors are not covered with mud, ice or

snow.

Parking sensors

Switching off

When a forward gear is engaged, the last

image remains displayed for approximately

5 seconds then switches off.

In the same way, the last image also

remains displayed, with the vehicle

stationary, when the rear doors are closed.

Good practice

With optimum vehicle conditions (position on

the road, loading level) the maximum area of

visibility covered by the camera has a ﬁeld

depth approximately 3 m long and 5.5 m wide.

rEVErSInG cAMErA

If your vehicle is fitted with this camera, it is

located at the rear, next to the third brake

lamp.

Screen

The area of visibility may vary depending on

the external weather conditions (brightness,

rain, snow, fog, ...), the load in the vehicle

and the position of the vehicle on the road.

The camera sends the images to a 5 inch

LCD colour screen. This screen is also

the one used by the touch screen audio-

telematic system.

It sends images to the screen installed

in the cab. This rear vision is an aid to

manoeuvring.

When cleaning the camera and the screen,

avoid using a detergent or a tool which may

scratch the glass.

Activation and deactivation of the system

is done in the settings menu of the touch

screen audio-telematic system.

The reversing camera may be coupled with

rear parking sensors.

Use a non-abrasive cloth or a small brush.

Operation

The camera comes into operation when

reverse gear is engaged and remains active

up to approximately 9 mph (15 km/h). It is

deactivated above 11 mph (18 km/h).

The camera also comes on, with the vehicle

stationary, when the rear doors are opened.

4

Technology on board for Your Citroen Relay Van 2014-2024

Related Topics

Popular Owner Manuals

Latest Owner Manuals