Get Instruments Guide for Citroen Spacetourer Van First Generation (2019-2024)

Instruments

1. Rev counter (x 1,000 rpm), ("Dials" mode).

Control buttons

Digital monochrome

instrument panel

Dials and display screens

2. Gear efficiency indicator, selector position

A. Instrument panel and touch screen lighting

and the gear with an automatic gearbox.

dimmer buttons.

3. Digital speedometer (mph or km/h).

4. Cruise control or speed limiter settings.

5. Fuel gauge.

B. Reminder of the service information.

Resetting of the selected function (service

indicator or trip distance recorder).

Reminder of the remaining range with the

SCR system and the AdBlue^®.

6. Total distance recorder (miles or km).

7. Trip distance recorder (miles or km).

8. Reminder of current media or telephone

Alert log (current alerts).

information.

9. Reminder of trip computer information.

1. Rev counter (x 1,000 rpm), graduation

10. Exterior temperature (blue warning lamp

depends on the engine (petrol or Diesel).

comes on if there is a risk of ice).

12-inch HD colour

instrument panel

This instrument panel can be customised.

Depending on the selected display mode, some

information may be hidden.

2. Gear efficiency indicator, selector position

and the gear with an automatic gearbox.

3. Digital speedometer (mph or km/h).

4. Cruise control or speed limiter settings.

5. Fuel gauge.

Control button

A. Reminder of the service information.

Reminder of the remaining range with the

SCR system and the AdBlue^®.

6. Service indicator, then total distance

recorder (miles or km).

Dials and display screens

These functions are displayed

successively on switching on the ignition.

Resetting of the selected function (service

indicator or trip distance recorder).

7. Trip distance recorder (miles or km).

8. Reminder of heating and air conditioning

settings.

8

Instruments

Choice of display mode

Display areas

Customisation of the 12-inch

colour instrument panel

1

You can modify the appearance of the

instrument panel, by choosing:

-

a coloured ambience,

a display mode.

As a safety measure, these adjustments should

be carried out with the vehicle stationary.

Each mode corresponds to the type of

information displayed in the configuration zone.

F Turn the knob located to the left of the

steering wheel to display and scroll through

the different modes on the right hand-side

of the instrument panel,

Choice of language

It depends on the configuration of the touch

screen.

Certain languages are not available for this

instrument panel, English is selected by default.

Whatever the display mode or coloured

ambience selected, the instrument panel

includes:

F once the desired display mode appears,

press on the knob to validate.

-

a fixed display area A with:

Choice of coloured ambience

•

the speedometer,

the warning and indicator lamps,

the fuel gauge,

the various information reminders and

warning messages,

or

Perform changes when the vehicle is stationary:

F

Press this button in the

"Settings" menu of the touch

screen.

-

a configurable display area B.

Most warning and indicator lamps do not have

a fixed position.

The system restarts to take the modifications

on the touch screen and instrument panel into

account.

The warning and indicator lamps are displayed

from right to left in order of priority.

For certain functions that have indicator lamps

for both operation and for deactivation, there is

only one dedicated location.

F Press the end of the lighting control stalk

to display and scroll through the different

modes on the right hand-side of the

instrument panel,

9

Instruments

-

"Driving": display of the rev counter and

driving information (inter-vehicle time, etc.)

F once the selected display mode appears,

it is automatically applied after a few

moments with no action on the control stalk.

-

"Personal": choice of information to be

displayed in each of the 2 display zones

(1/3 central and 1/3 right) among:

•

trip computer,

media,

navigation,

driving aids,

rev counter,

engine coolant temperature gauge,

no information (blank).

-

"Navigation": display of current navigation

information (map and instructions).

-

"Dials": permanent display of the trip

computer and the rev counter.

"Minimal": no information displayed.

Lighting dimmer

Allows manual adjustment of the brightness

of the instrument panel and touch screen

according to the exterior brightness.

10

Instruments

Only works when the vehicle lamps are on,

except daytime running lamps.

F In the Settings menu, select "Brightness".

F Adjust the brightness by pressing the

arrows or moving the slider.

Black panel (touch screen)

1

F In the Settings menu, select "Dark". The

screen goes off.

F Press the screen again (anywhere on its

surface) to switch it on again.

Two buttons

Black panel (comfortable

night driving display)

When driving at night, this function allows

certain instrument panel displays to be

switched off so as to reduce visual fatigue for

the driver.

The essential driving information, such as the

vehicle speed, warning and indicator lamps,

the cruise control or speed limiter, remains

displayed in the instrument panel.

Warning and indicator

lamps

Displayed as symbols, the warning and

indicator lamps inform the driver of the

occurrence of a malfunction (warning lamps) or

of the operating status of a system (operation

or deactivation indicator lamps). Certain lamps

light up in two ways (fixed or flashing) and/or in

several colours.

With the exterior lighting on, press button A to

increase the brightness of the instruments and

controls and the ambience of the vehicle or

button B to reduce it.

Using the steering mounted

control

Associated warnings

As soon as the lighting reaches the required

level of brightness, release the button.

The illumination of a lamp can be accompanied

by an audible signal and/or a message

displayed in a screen.

Relating the type of alert to the operating status

of the vehicle allows you to determine whether

the situation is normal or a fault has occurred:

refer to the description of each lamp for further

information.

Touch screen

F With the exterior lighting on, press this

button to activate the black panel.

F Press the button once again to deactivate it.

11

Instruments

When the ignition is switched on

Certain red or orange warning lamps come on

for a few seconds when the ignition is switched

on. These warning lamps should go off as soon

as the engine is started.

Persistent warning lamp

When the engine is running or the vehicle is

being driven, the illumination of a red or orange

warning lamp indicates a fault that needs

further investigation, using any associated

message and the description of the warning

lamp in the documentation.

Where a warning lamp remains lit

The references (1), (2) and (3) in the warning

and indicator lamp description indicate whether

you should contact a qualified professional

in addition to the immediate recommended

actions.

(1): You must stop as soon as it is safe to do

so and switch off the ignition.

(2): Contact a CITROËN dealer or a qualified

workshop.

(3): Go to a CITROËN dealer or a qualified

workshop.

12

Instruments

List of warning and indicator lamps

1

Warning/indicator lamp

State

Cause

Actions/Observations

Red warning/indicator lamps

STOP

Fixed, associated

Indicates a serious fault with the

engine, braking system, power

steering or a major electrical fault.

Carry out (1) and then (2).

with another warning

lamp, accompanied

by the display of

a message and an

audible signal.

Engine oil

pressure

Fixed.

There is a fault with the engine

lubrication system.

Carry out (1) and then (2).

Brakes

Fixed.

The brake fluid level has dropped

significantly.

Carry out (1), then top up with brake fluid that

complies with the manufacturer's recommendations.

If the problem persists, carry out (2).

Fixed.

The electronic brake force

Carry out (1) and then (2).

distribution (EBFD) system is faulty.

+

13

Instruments

Warning/indicator lamp

State

Cause

Actions/Observations

Electric parking

brake

Fixed.

The electric parking brake is applied.

Flashing.

The electric parking brake is not

applied automatically.

The application/release is faulty.

Carry out (1): park on flat level ground (horizontally).

With a manual gearbox, engage a gear.

With an automatic gearbox, select mode P.

Switch off the ignition and carry out (2).

Operating fault

(with electric

parking brake)

Fixed, accompanied

by the message

"Parking brake fault".

The parking brake is not operating

at maximum efficiency and cannot

ensure parking the vehicle in

Make your vehicle safe:

F Park on a level surface.

F With a manual gearbox, engage a gear.

F With an automatic gearbox, with P selected, place

the chocks supplied against one of the wheels.

Then carry out (2).

+

complete safety in all situations.

+

Maximum

coolant

temperature

Fixed.

The temperature of the cooling

system is too high.

Carry out (1), then wait until the engine has cooled

down before topping up to the required level if

necessary. If the problem persists, carry out (2).

Battery charge

The battery charging circuit has

a fault (dirty or loose terminals, slack

or cut alternator belt, etc.).

Clean and retighten the terminals. If the warning lamp

does not go off when the engine is started, carry out (2).

14

Instruments

Warning/indicator lamp

State

Cause

Actions/Observations

1

Door open*

Fixed, associated with A door, the boot, the tailgate or

a message identifying the tailgate screen is still open

the access.

An audible signal

supplements the alert

if the speed is higher

than 6 mph (10 km/h).

Close the access.

(depending on version).

Seat belt not

fastened/

unfastened

Fixed or flashing,

accompanied by an

audible signal.

A seat belt has not been fastened or

has been unfastened.

Orange warning/indicator lamps

Operating fault

(with electric

parking brake)

Fixed.

The electric parking brake has

a fault.

Carry out (3) quickly.

Fixed, accompanied

by the message

"Parking brake fault".

You can no longer immobilise the

vehicle with the engine running.

If manual application and release are not working, the

electric parking brake control lever is faulty.

The automatic functions must be used at all times and

are automatically reactivated in the event of failure of

the control lever.

+

Carry out (2).

*

Only with digital monochrome instrument panel.

15

Instruments

Warning/indicator lamp

State

Cause

Actions/Observations

Operating fault

(with electric

parking brake)

Fixed, accompanied

by the message

"Parking brake fault".

The parking brake is faulty: manual

and automatic functions may not be

working.

When stationary, to immobilise your vehicle:

F Pull and hold the control lever for approximately

7 to 15 seconds, until the warning lamp comes on

in the instrument panel.

+

If this procedure does not work, make your vehicle

safe:

+

F Park on a level surface.

F If you have a manual gearbox, engage a gear.

F With an automatic gearbox, select P, then put the

supplied chocks against one of the wheels.

Then carry out (2).

Deactivation of

the automatic

functions (with

electric parking

brake)

Fixed.

The "automatic application" (on

switching off the engine) and

"automatic release" (on acceleration) The brake can be applied or released manually.

functions are deactivated.

In the event of a fault, illumination of

this warning lamp is accompanied by

a message.

Carry out (3) if automatic application/release is no

longer possible.

Automatic

application

(with electric

Fixed, accompanied

by the message

"Parking brake fault".

The automatic application is not

available, the parking brake can only

be used manually.

Use the electric parking brake control lever.

If automatic release is also not available, use manual

release.

+

parking brake)

Anti-lock Braking Fixed.

System (ABS)

The anti-lock braking system has

a fault.

The vehicle retains conventional braking.

Drive carefully at reduced speed, then carry out (3).

16

Instruments

Warning/indicator lamp

Service

State

Cause

Actions/Observations

1

Temporarily on,

accompanied by the

display of a message.

One or more minor faults have

been detected for which there is no

specific warning lamp.

Identify the cause of the fault using the message

displayed in the instrument panel.

You can deal with certain anomalies yourself, for

example an open door or the start of saturation of the

particle filter.

For any other problems, such as a fault with the tyre

under-inflation detection system, carry out (3).

Fixed, accompanied

by the display of

a message.

One or more major faults have

been detected for which there is no

specific warning lamp.

Identify the cause of the fault using the message

displayed in the instrument panel, then carry out (3).

Fixed, accompanied

by the message

Automatic release of the electric

parking brake is unavailable.

Use manual release.

'Parking brake fault'.

Service warning lamp

fixed and service

spanner flashing then

fixed.

The servicing interval has been

exceeded.

Only with BlueHDi Diesel versions.

Your vehicle must be serviced as soon as possible.

+

(1): You must stop as soon as it is safe to do

so and switch off the ignition.

(2): Contact a CITROËN dealer or a qualified

workshop.

(3): Go to a CITROËN dealer or a qualified

workshop.

17

Instruments

Warning/indicator lamp

State

Cause

Actions/Observations

AdBlue^®

(access via the

boot)

Fixed, on switching

on the ignition,

accompanied by an

audible signal and

The remaining driving range is

between 1,500 and 375 miles

(2,400 and 600 km).

Top up the AdBlue^®as soon as possible, or carry out (3).

a message indicating the

remaining driving range.

AdBlue^®warning lamp The driving range is less than

You must top up the AdBlue^®to avoid a breakdown,

flashing and Service

warning lamp fixed,

accompanied by an

audible signal and

a message indicating

the remaining driving

range.

375 miles (600 km).

or carry out (3).

+

AdBlue^®warning lamp

flashing and Service

warning lamp fixed,

accompanied by an

audible signal and

a message indicating

that starting is

The AdBlue^®tank is empty: the

starting inhibition system required

by legislation prevents starting of the

engine.

To restart the engine, top up the AdBlue^®or carry out (2).

It is essential to add at least 5 litres of AdBlue^®to its

tank.

prevented.

18

Instruments

Warning/indicator lamp

State

Cause

Actions/Observations

1

AdBlue^®

(access via the

fuel filler flap)

On for around

The remaining driving range is

between 1,500 and 500 miles

(2,400 and 800 km).

Top up the AdBlue^®.

30 seconds when

starting the vehicle,

accompanied by

a message indicating

the remaining driving

range.

Fixed, on switching on

The remaining driving range is

Top up the AdBlue^®as soon as possible, or carry

the ignition, accompanied between 500 and 62 miles (800 and

out (3).

by an audible signal and

a message indicating the

remaining driving range.

100 km).

Flashing,

The driving range is less than

62 miles (100 km).

You must top up the AdBlue^®to avoid starting

being prevented, or carry out (3).

accompanied by an

audible signal and

a message indicating

the remaining driving

range.

Flashing,

The AdBlue^®tank is empty: the

starting prevention system required

by legislation prevents starting of the

engine.

To restart the engine, top up the AdBlue^®or carry out (2).

It is essential to add at least 5 litres of AdBlue^®to its

tank.

accompanied by an

audible signal and

a message indicating

that starting is

prevented.

19

Instruments

Warning/indicator lamp

State

Cause

Actions/Observations

SCR emissions

control system

(BlueHDi Diesel)

Fixed on switching on the

ignition, associated with

the Service and engine

diagnostic warning

A fault with the SCR emissions

control system has been detected.

This alert disappears once the exhaust emissions

return to normal levels.

+

lamps, accompanied by

an audible signal and

a message.

Flashing on switching

on the ignition,

Depending on the message

displayed, you can continue driving

for up to 685 miles (1,100 km) before

the engine starting prevention

system is triggered.

Carry out (3) as soon as possible to avoid

a breakdown.

associated with the

Service and engine

diagnostic warning

lamps, accompanied by

an audible signal and

a message indicating

the remaining driving

range.

Flashing on switching

on the ignition,

An engine immobiliser prevents

the engine from restarting (over

the authorised driving limit after

confirmation of a fault with the

emissions control system).

To start the engine, carry out (2).

associated with the

Service and engine

diagnostic warning

lamps, accompanied

by an audible signal

and a message.

(1): You must stop as soon as it is safe to do

so and switch off the ignition.

(2): Contact a CITROËN dealer or a qualified

workshop.

(3): Go to a CITROËN dealer or a qualified

workshop.

20

Instruments

Warning/indicator lamp

State

Cause

Actions/Observations

1

Engine

diagnostic

system

Flashing.

The engine management system has There is a risk that the catalytic converter will be destroyed.

a fault.

Carry out (2) without fail.

Fixed.

The emissions control system has

a fault.

The warning lamp should go off when the engine is started.

Carry out (3) quickly.

Collision Risk

Alert/Active

Safety Brake

Fixed, accompanied

by the display of

a message.

The system has been deactivated,

via the vehicle configuration menu.

Flashing.

The system is operating.

The system has a fault.

The vehicle brakes briefly so as to reduce the speed

of collision with the vehicle ahead.

Fixed, accompanied

by a message and an

audible signal.

Carry out (3).

Dynamic

Flashing.

The DSC/ASR regulation is activated

if there is a loss of grip or trajectory.

stability control

(DSC)/Anti-slip

regulation (ASR)

Fixed.

The DSC/ASR system has a fault.

Carry out (3).

Emergency

brake anomaly

(with electric

Fixed, accompanied

by the message

"Parking brake fault".

Emergency braking does not have

full power.

If automatic release is not available, use manual

release.

+

parking brake)

21

Instruments

Warning/indicator lamp

Under-inflation

State

Cause

Actions/Observations

Fixed, accompanied

by an audible signal

and a message.

The pressure in one or more tyres is

too low.

Check the pressure of the tyres as soon as possible.

Reinitialise the detection system after adjusting the

pressure.

Under-inflation

The system is faulty: tyre pressures

are no longer monitored.

Under-inflation detection is no longer monitored.

As soon as possible, check the pressure of the tyres

and carry out (3).

warning lamp flashing

then fixed and Service

warning lamp fixed.

+

Diesel engine

pre-heating

Temporarily on.

When switching on the ignition, if the

weather conditions and the engine

temperature make it necessary.

Wait until the warning lamp goes off before starting.

When the warning lamp goes off, starting is

immediate if you press and hold:

-

the clutch pedal with a manual gearbox.

the brake pedal with an automatic gearbox.

If the engine does not start, switch the ignition off and

then on, wait until the warning lamp goes off again,

then start the engine.

Airbags

Fixed.

One of the airbags or seat belt

pretensioners is faulty.

Carry out (3).

Front passenger Fixed.

airbag (ON)

The front passenger airbag is

activated.

The control is in the "ON" position.

In this case, do NOT install a "rearward facing"

child seat on the front passenger seat – Risk of

serious injury!

(1): You must stop as soon as it is safe to do

so and switch off the ignition.

(2): Contact a CITROËN dealer or a qualified

workshop.

(3): Go to a CITROËN dealer or a qualified

workshop.

22

Instruments

Warning/indicator lamp

State

Cause

Actions/Observations

1

Passenger

airbag system

Flashing.

The passenger airbag system is

defective.

Carry out (3).

Fixed.

The front passenger airbag is

deactivated.

The control is in the "OFF" position.

You can install a "rearward facing" child seat, unless

there is a fault with the airbags (Airbags warning lamp

on).

Low fuel level

Fixed, accompanied

by an audible signal

and a message.

When it first comes on, there

remains approximately 6 litres of

fuel in the tank (reserve).

Refuel without delay to avoid running out of fuel.

Never drive until completely empty, this could

damage the emissions and injection systems.

Lane Departure

Warning System

Fixed.

The system has been automatically

deactivated or placed on standby.

Flashing.

You are about to cross a broken

lane marking without operating the

direction indicators.

The system is activated, then corrects the trajectory

on the side of the lane marking detected.

Fixed, accompanied

by the display of

a message and an

audible signal.

The system has a fault.

Carry out (3).

+

Stop & Start

Fixed, accompanied

by the display of

a message.

The Stop & Start system is

deactivated.

The engine will not switch off at the next traffic stop.

Reactivate the function via the touch screen

configuration menu.

23

Instruments

Warning/indicator lamp

State

Cause

Actions/Observations

Foot on the

brake*

Fixed.

Omission or insufficient pressure on

the brake pedal.

With an automatic gearbox, with the engine running,

before releasing the parking brake, to move out of

position P.

Foot on the

clutch*

Fixed.

Stop & Start: the change to START

mode is rejected because the clutch

pedal is not fully depressed.

Fully depress the clutch pedal.

Rear foglamp

The lamp is on.

Green warning/indicator lamps

Stop & Start

Fixed.

When the vehicle stops, the Stop &

Start puts the engine into STOP mode.

Flashing temporarily.

STOP mode is momentarily

unavailable or START mode is

automatically triggered.

Park Assist

Fixed.

The function is active.

Blind spot

monitoring

The function has been activated.

*

Only with digital monochrome instrument panel.

24

Instruments

Warning/indicator lamp

State

Cause

Actions/Observations

1

Left-hand

direction

indicator

Flashing with audible

signal.

The direction indicators are on.

Right-hand

direction indicator signal.

Flashing with audible

Fixed.

The direction indicators are on.

The lamps are on.

Sidelamps

Dipped beam

headlamps

Fixed.

The lamps are on.

Directional

headlamps

Flashing.

The directional headlamps system

has a fault.

Have it checked by a CITROËN dealer or a qualified

workshop.

Front foglamps

Fixed.

The front foglamps are on.

Automatic

wiping

Fixed.

Automatic windscreen wiping is

activated.

Automatic

headlamp

dipping

The function has been activated in

the touch screen (Driving menu).

The lighting control stalk is in the

"AUTO" position.

+

or

Blue warning/indicator lamps

Main beam

headlamps

Fixed.

The main beams are on.

25

Instruments

Resetting the service indicator

Indicators

Service indicator

The distance indicated (in miles or

kilometres) is calculated according to the

distance covered and the time elapsed

since the last service.

The alert may be triggered close to a due

date.

The service indicator must be reset after each

service.

If you have carried out the service on your

vehicle yourself:

The service indicator is displayed in the

instrument panel. Depending on the vehicle

version:

F switch off the ignition,

-

the distance recorder display line indicates

the distance remaining before the next

service is due, or the distance travelled

since it was due preceded by the sign "-".

an alert message indicates the distance

remaining, as well as the period before the

next service is due or how long it is overdue.

-

Warning/indicator

Actions/

Observations

State

lamp

Cause

Service

spanner

Lights up temporarily

when the ignition is

switched on.

Between 620 and

1,860 miles (1,000 and

3,000 km) remain before

the next service is due.

F press and hold the trip distance recorder

reset button,

Fixed, when the

ignition is switched on. less than 620 miles

(1,000 km).

The service is due in

Have your vehicle

serviced very soon.

F switch on the ignition; the distance recorder

display begins a countdown,

F release the button when "=0" is displayed;

the spanner disappears.

Service

spanner

flashing

Flashing then fixed,

when the ignition is

switched on.

(For BlueHDi Diesel

versions, associated

with the Service

warning lamp).

The servicing interval

has been exceeded.

Have your vehicle

serviced as soon as

possible.

If you have to disconnect the battery

following this operation, lock the vehicle

and wait at least 5 minutes for the reset to

be registered.

+

26

Instruments

The level read will only be correct if the

vehicle is on level ground and the engine

has been off for more than 30 minutes.

You MUST stop as soon as it is safe to do

so.

Wait a few minutes before switching off the

engine.

Contact a CITROËN dealer or a qualified

workshop.

Retrieving the service

information

1

You can access the service information at any

time.

F Press the trip distance recorder reset

button.

Oil level correct

After driving for a few minutes, the temperature

and pressure in the cooling system increase.

To top up the level:

The service information is displayed for

a few seconds, then disappears.

F wait for the engine to cool,

F unscrew the cap slightly to allow the

pressure to drop,

F when the pressure has dropped, remove the

cap,

Oil level incorrect

Engine coolant temperature

gauge

F top up the level to the "MAX" mark.

(Only with the 12" colour instrument panel.)

This is indicated by the display of the message

"Oil level incorrect" in the instrument panel

screen, accompanied by the Service warning

lamp and an audible signal.

If the low oil level is confirmed by a check using

the dipstick, the level must be topped up to

avoid damage to the engine.

Be aware of the risk of scalding when

topping up the coolant. Do not fill above

the maximum level (indicated on the

reservoir).

For more information on Checking levels,

refer to the corresponding section.

Engine oil level indicator

(Depending on version.)

With the engine running, when the needle is:

On versions fitted with an electric oil level

indicator, the state of the engine oil level is

displayed in the instrument panel for a few

seconds, after the servicing information.

-

in zone A, the temperature is correct,

in zone B, the temperature is too high;

the maximum temperature and the

central STOP warning lamps come on,

accompanied by an audible signal and

a warning message.

Oil level indicator fault

27

Instruments

This is signalled by the display of the message "Oil

level measurement invalid" in the instrument panel.

Contact a CITROËN dealer or a qualified

workshop.

When driving, the message is displayed every

185 miles (300 km) until the level is topped up.

The reserve level has been reached; it is

recommended that you top up as soon as

possible.

In the event of the risk of non-

starting related to a lack of

AdBlue^®

The engine starting prevention system

required by regulations is activated

automatically once the AdBlue^®tank is

empty.

In the event of a fault with the electric

indicator, the engine oil level is no longer

monitored.

Remaining range less than 375 miles (600 km)

If the system is faulty, you must check the

engine oil level using the manual dipstick

located under the bonnet.

For more information on Checking levels,

refer to the corresponding section.

Range greater than 1,500 miles (2,400 km)

When switching on the ignition, there is no

automatic display of range in the instrument

panel.

When switching on the ignition, this warning

lamp flashes, accompanied by the permanent

lighting of the Service warning lamp, an audible

signal and the display of a message ("Top

up AdBlue: Starting impossible in x miles")

indicating the remaining range in miles or

kilometres.

When driving, this message is displayed every

30 seconds until the AdBlue level has been

topped up.

AdBlue^®range indicators

With the 12" colour instrument panel, pressing

this button temporarily displays the driving

range.

These range indicators are present only on

BlueHDi Diesel versions.

Once the AdBlue^®tank is on reserve or after

detection of a fault with the SCR emissions

control system, when the ignition is switched

on, an indicator displays an estimate of the

distance that can be covered, the range, before

engine starting is prevented.

It is essential to top up as soon as possible and

before the tank is completely empty; otherwise

it will not be possible to restart the engine after

the next stop.

With access via the boot

Remaining range between 1,500 and

375 miles (2,400 and 600 km)

Breakdown related to a lack of AdBlue^®

When switching on the ignition, this warning

lamp comes on, accompanied by an audible

signal and the display of a message ("Top

up AdBlue: Starting impossible in x miles")

indicating the remaining range expressed in

miles or kilometres.

When switching on the ignition, this warning lamp

flashes, and the Service warning lamp comes on,

accompanied by an audible signal and the display of

the message "Top up AdBlue: Starting impossible".

28

Instruments

Breakdown related to a lack of AdBlue^®

The AdBlue^®tank is empty: the starting

inhibition system required by legislation

prevents starting of the engine.

Range between 500 and 62 miles (800 and 100 km)

1

When switching on the ignition, this warning

lamp comes on, accompanied by an audible

signal (1 beep) and the display of a message

("Top up AdBlue: Starting impossible in

x miles") indicating the remaining range

expressed in miles or kilometres.

When driving, the audible signal and the

message display are triggered every 62 miles

(100 km) until the fluid is topped up.

It is essential to top up as soon as possible and

before the tank is completely empty; otherwise

it will not be possible to restart the engine after

the next stop.

When switching on the ignition, this warning

lamp flashes, accompanied by the display

of the message "Top up AdBlue: Starting

impossible".

To be able to restart the engine, it is

essential to add at least 5 litres of AdBlue^®

to its tank.

The AdBlue^®tank is empty: the starting

inhibition system required by legislation

prevents starting of the engine.

For more information on AdBlue^®

(BlueHDi engines), and, in particular,

on topping up, refer to the corresponding

section.

To be able to restart the engine, it is

essential to add at least 5 litres of AdBlue^®

to its tank.

With access via the fuel ﬁller ﬂap

Range between 1,500 and 500 miles

(2,400 and 800 km)

For more information on AdBlue^®

(BlueHDi engines), and, in particular,

on topping up, refer to the corresponding

section.

Range less than 62 miles (100 km)

Each time the vehicle is started, this warning

lamp comes on for about 30 seconds,

accompanied by the display of a message

("Top up AdBlue: Starting impossible in x

miles") indicating the remaining range in miles

or kilometres.

When switching on the ignition, this warning

lamp comes on, accompanied by an audible

signal (1 beep) and the display of a message

("Top up AdBlue: Starting impossible in x

miles") indicating the remaining range in miles

or kilometres.

The reserve level has been reached; it is

recommended that you top up as soon as

possible.

These messages are accompanied by the

recommendation to not top up with more than

10 litres of AdBlue.

When driving, the audible signal and the

message display are triggered every 6 miles

(10 km) until the AdBlue tank is topped up.

It is essential to top up as soon as possible and

before the tank is completely empty; otherwise

it will not be possible to restart the engine after

the next stop.

29

Instruments

During the permitted driving phase

(between 685 and 0 miles (1,100 and 0 km))

In the event of a fault with the

SCR emissions control system

You have exceeded the authorised driving

limit: the starting prevention system does

not allow the engine to be started.

A system that prevents engine starting is

activated automatically from 685 miles

(1,100 km) after confirmation of a fault with

the SCR emissions control system.

Have the system checked by a CITROËN

dealer or a qualified workshop as soon as

possible.

If a fault with the SCR system is confirmed

(after 31 miles (50 km) covered with the

permanent display of the message signalling

a fault), these warning lamps come on and the

AdBlue warning lamp flashes, accompanied by

an audible signal and the display of a message

(e.g. "Emissions fault: Starting prevented in

185 miles") indicating the remaining range in

miles or kilometres.

To be able to start the engine, you must call on

a CITROËN dealer or a qualified workshop.

Distance recorders

The total and trip distances are displayed for

thirty seconds when the ignition is switched off,

when the driver's door is opened and when the

vehicle is locked or unlocked.

In the event of the detection of a fault

While driving, the message is displayed every

30 seconds while the fault with the SCR system

persists.

The alert is repeated when switching on the

ignition.

You should go to a CITROËN dealer or a qualified

workshop as soon as possible.

When travelling abroad, you may need

to change the unit of distance: the speed

display must be expressed in the official

units of the country (km or miles). The

change of units is done via the screen

configuration menu, with the vehicle

stationary.

These warning lamps come on, accompanied

by an audible signal and the display of the

message "Emissions fault".

The alert is triggered when driving when the

fault is detected for the first time, then when

switching on the ignition for subsequent

journeys, while the fault persists.

Otherwise you will not be able to restart the vehicle.

Starting prevented

If it is a temporary fault, the alert

disappears during the next journey, after

self-diagnosis of the SCR system.

Each time the ignition is switched on, these

warning lamps come on and the AdBlue

warning lamp flashes, accompanied by an

audible signal and the display of the message

"Emissions fault: Starting prevented".

30

Instruments

Do not use pointed objects on the touch

Total distance recorder

Touch screen

screen.

1

The touch screen gives access to:

Do not touch the touch screen with wet hands.

Use a soft clean cloth to clean the touch

screen.

-

the heating/air conditioning controls,

menus for adjusting settings for vehicle

functions and systems,

-

audio system and telephone controls and

the display of associated information,

Principles

Use the buttons on each side of the touch

screen to access the menus, then use the

buttons that appear on the touch screen.

Certain functions may be displayed over 1 or

2 pages.

To deactivate/activate a function, press OFF/

ON.

To modify a setting (lighting duration, etc.) or

find additional information, press the symbol for

the function.

and, depending on equipment, allows:

-

the display of alert messages and the visual

parking sensors information,

-

the permanent display of the time and the

exterior temperature (a blue warning lamp

appears when there is a risk of ice),

access to the internet services and

navigation system controls and the display

of associated information.

It measures the total distance travelled by the

vehicle since its first registration.

-

Trip recorder

As a safety measure, the driver should

only carry out operations that require

close attention with the vehicle

stationary.

Some functions are not accessible when

driving.

After a few moments with no action on

the secondary page, the primary page is

displayed automatically.

Use this button to confirm.

General operation

Use this button to return to the

previous page.

It measures the distance travelled since it was

reset by the driver.

Recommendations

Use is possible in all temperatures.

F With the ignition on, press the button until

zeros appear.

31

Instruments

Telephone.

See the "Audio and telematics" section.

Access to Configuration.

Menus

Applications.

Enables the trip computer to

be displayed with the digital

monochrome instrument panel.

See the "Audio and telematics" section.

Driving.

Allows the activation, deactivation

and adjustment of settings for

certain functions.

The functions accessible from this menu are

arranged under two tabs: "Vehicle settings"

and "Driving functions".

Volume control/mute.

See the "Audio and telematics"

section.

Air conditioning.

Allows adjustment of the various

settings for temperature, air flow,

etc.

Upper bar

For more information on Heating, Manual

air conditioning and Automatic air

conditioning, refer to the corresponding

sections.

Certain information is always present in the

upper bar of the touch screen:

-

Summary of air conditioning information and

access to the simplified menu (temperature

and air flow adjustment only).

Connected navigation.

See the "Audio and telematics" section.

-

Summary of information from the Radio

Media, Telephone menus and navigation

instructions*.

Radio Media.

-

Notifications zone (texts and email)*.

See the "Audio and telematics" section.

*

Depending on equipment

32

Instruments

Driving menu

1

Vehicle settings tab

The functions are grouped into 4 families.

Families

Functions with CITROËN Connect Radio

Functions with CITROËN Connect Nav

Driving lighting

-

"Guide-me-home lighting": activation/deactivation of

automatic guide-me-home lighting.

"Welcome lighting": activation/deactivation of exterior

welcome lighting.

"Directional headlamps": activation/deactivation of the

cornering lighting/directional headlamps.

"Daytime running lamps" (LED daytime running lamps)

depending on country of sale.

-

"Directional headlamps": activation/deactivation of the

cornering lighting/directional headlamps.

"Daytime running lamps" (LED daytime running lamps)

depending on country of sale.

Vehicle access

-

"Unlock driver's door only": activation/deactivation of

selective unlocking of the driver's door.

"Unlock boot only": activation/deactivation of unlocking

at the tailgate.

"Motorised tailgate": activation/deactivation of

motorised operation of the tailgate.

-

"Unlock driver's door only": activation/deactivation of

selective unlocking of the driver's door.

"Unlock boot only": activation/deactivation of unlocking

at the tailgate.

"Motorised tailgate": activation/deactivation of

motorised operation of the tailgate.

"Hands-Free Tailgate Access": activation/deactivation

of the hands-free tailgate function.

"Hands-Free Tailgate Access": activation/deactivation

of the hands-free tailgate function.

33

Instruments

Families

Comfort

Functions with CITROËN Connect Radio

Functions with CITROËN Connect Nav

-

"Rear wiper in reverse": activation/deactivation of the

rear wiper on with reverse gear.

"Mood lighting": activation/deactivation of the interior

ambient lighting.

"Mirror adaptation in reverse": activation/deactivation

of the automatic mirror tilt when engaging reverse

gear.

-

"Rear wiper in reverse": activation/deactivation of the

rear wiper on with reverse gear.

"Guide-me-home lighting": activation/deactivation of

automatic guide-me-home lighting.

"Welcome lighting": activation/deactivation of exterior

welcome lighting.

"Mood lighting": activation/deactivation of the interior

ambient lighting.

"Mirror adaptation in reverse": activation/deactivation

of the automatic mirror tilt when engaging reverse

gear.

Security

-

"Collision risk alert": activation/deactivation of the

collision risk alert.

"Recommended speed display": activation/

deactivation of speed limit recognition.

"Fatigue Detection System": activation/deactivation of

the driver fatigue detection system.

-

"Collision risk alert": activation/deactivation of the

collision risk alert.

"Recommended speed display": activation/

deactivation of speed limit recognition.

"Fatigue Detection System": activation/deactivation of

the driver fatigue detection system.

For more information on one of these

functions, refer to the corresponding

section.

34

Instruments

Driving functions tab

1

Function

Comment

Adjusting Speeds

Memorisation of speed settings for the speed limiter, cruise control and adaptive cruise control.

Under-inflation initialisation

Diagnostic

Reinitialisation of the under-inflation system.

List of current alerts.

Lane assist

Activation/deactivation of the "active lane departure warning" system.

Activation/deactivation of the function.

Parking sensors

Automatic headlamp dipping

Stop & Start

Activation/deactivation of the "automatic headlamp dipping" function.

Activation/deactivation of the function.

Blind spot sensors

Panoramic visual aid

Active cruise control

Traction control

Activation/deactivation of the function.

Activation/deactivation of the function and then choice of options.

Choice of the standard cruise control or adaptive cruise control function.

Activation/deactivation of the function.

For more information on one of these

functions, refer to the corresponding

section.

35

Instruments

Conﬁguration

Digital monochrome

instrument panel

Button

Comments

The functions available through the

Adjustment of the display

parameters (text scrolling,

animations, etc.) and

brightness.

upper menu bar are detailed in the

table below. Certain settings can be

accessed on the second page.

The data is accessible in the

"Driving" menu.

Choose an ambience for the 12-

inch colour instrument panel.

Button

Comments

Switch off the screen.

Choice of the type of

information displayed in the 12-

inch colour instrument panel.

Brightness adjustment.

Choice of units:

-

temperature (°Celsius or

°Fahrenheit)

-

distances and fuel consumption

(l/100 km, mpg or km/l).

Choice and configuration of

three personalised profiles and

a common profile.

Choice of language for the

touch screen and 12-inch colour

instrument panel.

Touch screen and instrument

panel settings, etc.

Permanent display:

F Select the "Applications" menu, then "Trip

computer".

Setting the date and time.

Activation and adjustment of the

Wi-Fi settings.

The information of the trip computer is

displayed in tabs.

F Press one of the buttons to display the

desired tab.

Trip computer

System that gives you information on

the current journey (range, current fuel

consumption, average fuel consumption, etc.).

36

Instruments

Temporary display in a specific window:

F Press the end of the wiper control stalk for

access to the information and to display the

different tabs.

Trip reset

12" colour instrument panel

1

Display of data on the instrument

panel

The current information tab with:

Trip computer data is displayed permanently

when you select the "Dials" or "Personal"

display mode.

-

Range.

Current fuel consumption.

Stop & Start time counter.

The trip "1" tab with:

-

Average speed for the first trip.

Average fuel consumption.

Distance travelled.

The trip "2" tab with:

-

Average speed for the second trip.

Average fuel consumption.

Distance travelled.

In all other display modes, pressing the end of

the wiper control stalk will cause this data to

appear temporarily in a specific window.

F When the desired trip is displayed, press

the reset button or on the end of the wiper

control stalk.

Trips "1" and "2" are independent and are used

identically.

For example, trip 1 can be used for daily

calculations, and trip 2 for monthly calculations.

F Press the button on the end of the wiper

control stalk to display the various tabs in

succession.

37

Instruments

Resetting the trip recorder

This value may vary following a change in

the style of driving or the terrain, resulting

in a significant change in the current fuel

consumption.

When the range falls below 19 miles (30 km),

dashes are displayed. After filling with at least

5 litres of fuel, the range is recalculated and is

displayed if it exceeds 62 miles (100 km).

If dashes are displayed continuously

while driving in place of the digits, contact

a CITROËN dealer or a qualified workshop.

F When the desired trip is displayed, press

the button at the end of the wiper control

stalk for more than two seconds.

Trips 1 and 2 are independent and are used

identically.

For example, trip 1 can be used for daily

calculations, and trip 2 for monthly calculations.

-

The current information tab with:

Current fuel consumption

•

range,

(mpg or l/100 km or km/l)

Calculated during the last few

seconds.

current fuel consumption,

Stop & Start time counter.

Trip 1 with:

•

the average speed,

the average fuel consumption,

the distance travelled,

A few definitions

Range

This function is only displayed from

19 mph (30 km/h).

for the first trip.

(miles or km)

The distance which can still be

travelled with the fuel remaining in

the tank (related to the average fuel

consumption over the last few miles

(kilometres) travelled).

-

Trip 2 with:

Average fuel consumption

•

the average speed,

the average fuel consumption,

the distance travelled,

(mpg or l/100 km or km/l)

Calculated since the last time the

trip was reset.

for the second trip.

38

Instruments

F Select "Date" or "Time".

F Choose the display formats.

F Change the date and/or time using the

numeric keypad.

Average speed

Additional adjustments

1

(mph or km/h)

Calculated since the last time the

trip was reset.

You can choose:

-

To change the display format of the date

and time (12h/24h).

-

To change the time zone.

To activate or deactivate synchronisation

with the GPS (UTC).

F

Press this button to confirm.

Distance travelled

(miles or km)

Calculated since the last time the

trip was reset.

With CITROËN Connect Nav

The system does not automatically

manage the change between winter and

summer time (depending on country).

The change between winter and summer

time is done by changing the time zone.

Adjustment of the time and date is only

available if synchronisation with GPS is

deactivated.

Stop & Start time counter

(minutes/seconds or hours/minutes)

F

Select the Settings menu.

A time counter calculates the total of the

periods in STOP mode during a journey.

It resets to zero every time the ignition is

switched on.

F Press the "OPTIONS" button to go to the

secondary page.

F

Select "Setting the time-date".

Setting the date and time

With CITROËN Connect

Radio

F Select the "Date" or "Time" tab.

F Adjust the date and/or time using the

numeric keypad.

F

Select the Settings menu.

F Press this button to confirm.

F

Press this button to confirm.

F Select "System configuration".

Select "Date and time".

F

39

Instruments for Your Citroen Spacetourer Van First Generation (2019-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals