Lighting and visibility
To reactivate the system, flash the headlamps
again.
1. 5 people + maximum authorised load.
-. Intermediate setting.
Clean the windscreen regularly,
particularly the area in front of the camera.
The internal surface of the windscreen can
also become misted around the camera.
In humid and cold weather, demist the
windscreen regularly.
Do not allow snow to accumulate on the
bonnet or roof of the vehicle as this could
conceal the detection camera.
2. Driver + maximum authorised load.
-. Intermediate setting.
The system may suffer interference or not
work correctly:
3. 5 people + maximum authorised load in
the boot.
-
under poor visibility conditions (snow,
heavy rain, etc.),
-
if the windscreen is dirty, misted or
obscured (by a sticker, etc.) in front of
the camera,
Clean the front bumper, especially around
the radar, removing mud, snow, etc.
The initial setting is position 0.
-
if the vehicle is facing highly reflective
signs.
When the system detects thick fog, it
temporarily deactivates the function.
The system is not able to detect:
Cornering lighting
-
road users that do not have their own
lighting, such as pedestrians,
vehicles whose lighting is obscured
(for example: vehicles running behind
a safety barrier on a motorway),
vehicles at the top or bottom of
a steep slope, on winding roads, on
crossroads.
Headlamp adjustment
-
-
If your vehicle is equipped with it, this system
makes use of the beam from a front foglamp
to illuminate the inside of a bend, when the
main or dipped beam headlamps are on and
the vehicle speed is below 25 mph (40 km/h)
(urban driving, winding road, junctions, parking
manoeuvres, etc.).
To avoid causing a nuisance to other road
users, the headlamp beams should be adjusted
for height according to the vehicle's load.
0. 1 or 2 people in the front seats.
-. Intermediate setting.
96
English 
