Technical data
-
-
-
the European Whole Vehicle Type Approval number,
the Vehicle Identification Number (VIN),
the maximum authorised weight (gross vehicle
weight),
Checking tyre pressures
The tyre pressures should be checked when
cold at least monthly.
The pressures given on the label are valid for
cold tyres. If you have driven for more than
10 minutes or more than 6 miles (10 kilometres)
at more than 31 mph (50 km/h), the tyres will be
warm; in this case 0.3 bar (30 kPa) should be
added to the pressures given on the label.
Identification markings
Different visible markings for the identification
and research of your vehicle.
-
the maximum authorised weight with trailer (gross
train weight),
-
-
the maximum weight on the front axle,
the maximum weight on the rear axle.
Never reduce the pressure of a warm tyre.
D. Tyre/paint label.
Low tyre pressures increase fuel
consumption.
This label on the middle door pillar, driver's
side, contains the following information:
-
the tyre inflation pressures with and without
load,
-
the tyre sizes (including the load index and
speed rating),
A. Vehicle Identification Number (VIN),
under the bonnet.
This number is engraved on the chassis near
the right-hand front wheel arch.
-
-
the spare tyre inflation pressure,
the paint colour code.
B. Vehicle Identification Number (VIN), on
the windscreen lower cross member.
The number is on a label, visible through the
windscreen.
The vehicle may be originally equipped
with tyres with higher load and speed
indices than those indicated on the label,
without affecting inflation pressure.
C. Manufacturer's label.
This tamperproof label on the middle door
pillar, right or left-hand side, contains the
following information:
-
the name of the manufacturer,
244
English 
