ALL TYPES
SPECIFICATIONS : PETROL/LPG DUAL FUEL SYSTEM
1) Fuel tank
6) Injectors and valves.
- Capacity : 70 litres.
- Location : in the engine compartment, under the air manifold.
- Max. pressure : during tests / in operation : 30 bars / 20 bars.
- Max. operating temperature : 50°C.
7) Pressure sensor.
- Location : in the boot.
- Ssupply voltage : 5 volts.
- Location : on the evaporator control valve support.
2) Fuel gauge
- Supply voltage : 12 volts.
8) Temperature sensor 15°C.
- Resistance : 0 to 15 ohms empty, 280 to 315 ohms full.
- Location : on the gauge valve.
- Location : on the control valve reheating circuit.
9) LPG filter.
3) LPG gauge valve.
- Type : paper.
- Location : on the fuel tank.
- Replacement intervals: every 37,500 miles.
- Location : on the evaporator control valve inlet union.
4) Safety electrovalve.
- Supply voltage : 12 volts.
- Power : 8W.
- resistance : 18 ohms.
- Location : on the gauge valve.
10) Supply electrovalve.
- Supply voltage : 12 volts.
- Power : 8W.
- Resistance : 18 ohms.
- Location : on the evaporator control valve inlet union.
5) Filler orifice with safety valve.
- Location : on the rear right wing.
141
English 
