BRAKES (continued)
SAXO - All Types
EVOLUTION : Fixing screws for FRONT brake calipers: Type BENDIX STANDARD 4.
Application from RPO 8973.
Repair.
Vehicles concerned.
Vehicles equipped with non-ventilated brake discs. (Except VTS trim
level).
Removing-refitting the front brake caliper (old and new fitting)
Vehicles equipped with the following engines:
TUD5 – TU1JP – TU3JP
TU1M+ (Entreprise) and TU9M (Entreprise).
Evolutions.
Evolutions of the following components:
Front brake caliper fixing screws.
Clean the threads of the fixing screws and coat them with a brake product
of type «E3».
Tightening
Angular tightening
: 3.5 m.daN ± 0.3
: 87° ± 3°
Stop plates for front brake caliper fixing screws.
Evolutions of the fixing screws:
Interchangeability
Coating on the threads of the fixing screws.
Flanges for better centring of the fixing screws.
NOTE : The fixing screws are matched to the stop plates.
The new fixing screws matched to the new stop plates can be fitted on the
old front brake calipers.
IMPERATIVE : Respect the matching of the stop plates and fixing
screws.
IIMPERATIVE : Respect the tightening torques.
Old fitting: tighten to 12 m.daN.± 1.2 (up to RPO 8972).
NEW FITTING (from RPO 8973).
Replacement parts.
The Replacement Parts service markets both the old and the new com-
ponents.
Tightening
: 3.5 m.daN ± 0.3
: 87° ± 3°
Angular tightening
253
English 
