Get Touch screen BLUETOOTH Guide for DS 3 Crossback 4 Door First Generation (2018-2022)

173

10

Touch screen BLUETOOTH audio system

The system is protected in such a way

that it will only operate in the vehicle.

The Energy Economy Mode message is

displayed when the system is about to enter

the corresponding mode.

– Telephone connected via Bluetooth and

Bluetooth multimedia broadcast (streaming).

– USB memory stick.

Touch screen BLUETOOTH

audio system

– Media player connected via the auxiliary socket

(depending on equipment).

In very hot conditions, the volume may be

limited to protect the system. It may go

into standby (screen and sound off) for at least

5 minutes.

The return to normal takes place when the

temperature in the passenger compartment

has dropped.

First steps

With the engine running, a press mutes the

sound.

With the ignition off, a press turns the system on.

Increase or decrease the volume using the

thumbwheel on the left-hand side.

To access the menus, press this button on

the touch screen.

Steering mounted controls

Multimedia audio system -

Bluetooth^®telephone

Press the back arrow to go back a level.

Steering mounted controls -

Type 1

To clean the screen, use a soft, non-

abrasive cloth (e.g. spectacles cloth) with

no additional product.

Do not use sharp objects on the screen.

Do not touch the screen with wet hands.

The functions and settings described vary

according to the vehicle version and

configuration.

Radio:

For safety reasons and because they

require sustained attention by the driver,

the following operations must be carried out

with the vehicle stationary and the ignition on:

– Pairing the smartphone with the system in

Bluetooth mode.

– Using the smartphone.

– Changing the system settings and

configuration.

Certain information is displayed permanently in

the upper bar of the touch screen:

– Air conditioning information (depending on

version).

Select the previous/next preset radio

station.

Select the previous/next item in a menu or a list.

Media:

Select the previous/next track.

Select the previous/next item in a menu or a list.

Radio:

Short press: display the list of radio

stations.

– Bluetooth connection.

– Indication of location data sharing.

Selection of the audio source:

– FM/AM/DAB radio stations (depending on

equipment).

Long press: update the list.

174

10

Touch screen BLUETOOTH audio system

Media:

Increase volume.

Menus

Short press: display the list of folders.

Long press: display the available sorting options.

Short press: change audio source (radio;

USB; AUX if equipment connected; CD;

streaming).

Decrease volume.

Radio

Mute by pressing the volume increase and

decrease buttons simultaneously (depending on

equipment).

Long press: display the call log.

Restore the sound by pressing one of the two

volume buttons.

Short press during an incoming call: accept the

call.

Change the multimedia source.

Short press during a call in progress: end the call.

Short press: display the calls log.

Short press during an incoming call:

accept the call.

Long press during an incoming call: reject the call.

Short press during a call in progress: end the call.

Radio (rotate): previous/next preset

station.

Confirm a selection.

Increase volume.

Decrease volume.

Select a radio station.

Media

Media (rotate): previous/next track, move in a list.

Short press: confirm a selection; if nothing

selected, access to presets.

Mute/restore sound by simultaneously

pressing the increase and decrease

volume buttons.

Radio: display the list of stations.

Media: display the list of tracks.

Steering mounted controls -

Type 2

Voice commands:

This control is located on the steering

wheel or at the end of the lighting control stalk

(depending on equipment).

Select an audio source.

Short press, smartphone voice commands via the

system.

175

10

Touch screen BLUETOOTH audio system

Telephone

Settings

Radio

Choose the band

Press the "Radio" menu.

Press the "SOURCE" button.

Choose the band: FM, AM or DAB, depending on

equipment.

Selecting a station

Press one of the buttons for an automatic

search for radio stations.

Or

Connect a mobile phone via Bluetooth^®.

Adjust the sound settings (balance,

ambience, etc.), the display (language,

units, date, time, etc.) or configure the system

(privacy).

Press on the displayed frequency.

Driving

Enter the FM and AM waveband values

using the virtual keypad.

Or

Air conditioning/Heating

Press this button to display the list of

stations received and available on the

waveband.

Radio reception may be affected by the

use of electrical equipment not approved

by the Brand, such as a USB charger connected

to the 12 V socket.

The exterior environment (hills, buildings,

tunnels, basement car parks, etc.) may

block reception, including in RDS mode. This

behaviour is normal in propagation of radio

waves and does not indicate any failure of the

audio system.

Activate, deactivate or configure certain

vehicle functions (depending on

equipment/version).

Depending on equipment/Depending on version.

Manage various temperature and air flow

settings.

176

10

Touch screen BLUETOOTH audio system

To operate, this function needs good reception

of a radio station that transmits this type of

message. While traffic information is being

broadcast, the current media is automatically

interrupted so that the TA message can be heard.

Normal play of the media previously playing is

resumed at the end of the message.

Presetting a station

DAB (Digital Audio

Broadcasting) radio

Terrestrial Digital Radio

Select a radio station or frequency.

Press the "Presets" button.

Make a long press on an empty line to preset the

station. An audible signal confirms the presetting

of the station.

Choosing the DAB radio

Terrestrial digital radio (DAB) provides higher

quality reception.

Press the "Radio Settings" button.

It is possible to preset up to 16 stations.

The different "multiplexes/ensembles" offer a

choice of radio stations arranged in alphabetical

order.

To replace a preset station by the

currently playing station, make a long

press on the preset station.

Activate/Deactivate "Traffic

announcement (TA)".

Press the "Radio" menu.

Audio settings

Press the "Radio Settings" button.

Activating/Deactivating RDS

Press the "SOURCE" button.

In the list of available sources, choose "DAB

Radio".

RDS, if activated, allows you to continue listening

to the same station by automatically retuning to

alternative frequencies.

In the list, select "Audio Settings".

Activate/deactivate and configure the available

options (sound balance, ambiances, etc.).

Activating FM-DAB Tracking

In certain conditions, tracking may not be

assured throughout the entire country as

radio stations do not cover 100% of the

territory. This explains the loss of reception of

the station during a journey.

The sound balance/distribution is audio

processing that allows the quality of the

sound to be adapted according to where the

passengers are sitting in the vehicle.

"DAB" does not cover 100% of the territory.

When the digital radio signal is poor, the "FM-DAB

tracking" allows you to continue listening to the

same station, by automatically switching to the

corresponding "FM" analogue station (if there is

one).

Press the "Radio Settings" button.

Activate/Deactivate "RDS options".

Press the "Radio Settings" button.

Activate "DAB-FM".

Playing TA messages

The TA (Traffic Announcement) function gives

priority to TA alert messages.

If "FM-DAB tracking" is activated, there

may be a difference of a few seconds

177

10

Touch screen BLUETOOTH audio system

when the system switches to "FM" analogue

radio with sometimes a variation in volume.

Once the digital signal quality is restored, the

system automatically changes back to "DAB".

Playlists are updated whenever a USB memory

stick is connected or the contents of a particular

USB memory stick are changed. The lists

are memorised: if they are not modified, the

subsequent loading time will be shorter.

Once connected in Streaming mode, the

smartphone is considered to be a media

source.

Connecting Apple^®players

If the "DAB" station being listened to is

not available on "FM", or if the "FM-DAB

tracking" is not activated, the sound will cut

out while the digital signal is too weak.

Connect the Apple^®player to the USB socket using

a suitable cable (not supplied).

Auxiliary (AUX) jack socket

Depending on equipment

Play starts automatically.

Control is via the audio system.

Connect a portable device (MP3 player,

etc.) to the auxiliary jack socket using an

audio cable (not supplied).

This source is only available if "Aux Amplification"

has been selected in the audio settings.

First adjust the volume on the portable device (to

a high level). Then adjust the volume of the audio

system.

The classifications available are those of

the portable device connected (artists/

albums/genres/playlists/audio books/

podcasts). It is also possible to use a

classification structured in the form of a

library.

The default classification used is by artist. To

modify the classification used, return to the

first level of the menu then select the desired

classification (playlists for example) and

confirm to go down through the menu to the

desired track.

Media

Selecting the source

Press the "Media" menu.

Controls are managed via the portable device.

Press the "SOURCE" button.

Select the source (USB, Bluetooth or AUX,

depending on equipment).

Bluetooth^®streaming

Streaming allows you to listen to music from your

smartphone.

The Bluetooth profile must be activated, first

adjust the volume on the portable device (to a

high level).

Then adjust the volume of the system.

If play does not start automatically, it may be

necessary to start the audio playback from the

smartphone.

USB port

Insert the USB memory stick into the USB

port or connect the USB device to the USB

port using a suitable cable (not supplied).

The version of software in the audio system may

not be compatible with the generation of the

Apple^®player.

To protect the system, do not use a USB

hub.

Media settings

Press the "Media Settings" button.

The system builds playlists (in temporary

memory); this operation can take from a

few seconds to several minutes at the first

connection.

Control is from the portable device or by using the

system's touch buttons.

Activate/deactivate track playback options and

access the audio settings.

178

10

Touch screen BLUETOOTH audio system

The audio settings are the same as the

audio settings for the radio. For more

information on the "Audio settings", refer to

the corresponding section.

We recommend using the original USB

cable for the portable device.

In the system, accept the connection request

from the telephone.

Procedure from the system

Press the Home button to access the

menus.

Select the "Telephone" menu.

Telephone

Information and advice

Pairing a Bluetooth^®telephone

Up to 10 phones can be paired to the system.

Activate the Bluetooth function on the telephone

beforehand and ensure that it is "visible to all"

(telephone configuration).

To complete the pairing, whichever procedure is

used (from the telephone or from the system),

ensure that the code is the same in the system

and in the telephone.

The system supports USB mass storage devices,

BlackBerry^®devices or Apple^®players via the USB

ports. The adapter cable is not supplied.

Devices are managed using the audio system

controls.

Press "Manage connections".

The list of telephones detected is displayed.

Select the name of the telephone in the list.

The system offers to connect the telephone with

two profiles:

– as "Telephone": hands-free kit, telephone only.

– as "Streaming": wireless playing of audio files

on the telephone.

Other devices, not recognised on connection,

must be connected to the auxiliary socket using

a jack cable (not supplied) or via Bluetooth

streaming, if compatible.

The services available depend on the

network, the SIM card and the

compatibility of the Bluetooth devices used.

Check for services availability in the phone's

manual and with the operator.

To protect the system, do not use a USB

hub.

The system cannot be connected to

multiple telephones with the same profile.

No more than 2 phones can be connected

simultaneously (1 per profile).

The audio system will only play audio files with

".wav", ".wma", ".aac", ".mp3", ".mp4", ".m4a",

".flac", ".ogg" file extensions and with a bit rate

of between 32 Kbps and 320 Kbps (300 Kbps

maximum for ".flac" files).

It also supports VBR (Variable Bit Rate) mode.

All ".wma" files must be standard WMA 9 files.

The supported sampling rates are 11, 22, 44 and

48 KHz.

To avoid reading and display problems, we

recommend choosing file names less than 20

characters long that do not contain any special

characters (e.g. “ ? . ; ù).

The Bluetooth profiles chosen on the

phone have priority over the profiles

selected on the system.

The profiles compatible with the system

are: HFP, OPP, PBAP, DID, A2DP, AVRCP, SPP

and PAN.

If the pairing procedure fails, it is recommended

that you deactivate and then reactivate the

Bluetooth function on the telephone.

Go to the Brand's website for more information

(compatibility, additional help, etc.).

Procedure from the telephone

Depending on the type of telephone, the

option is given to accept or not accept the

transfer of contacts and the call log.

Select the name of the system in the list of

devices detected.

Use only USB memory sticks in FAT or FAT32

format (File Allocation Table).

179

10

Touch screen BLUETOOTH audio system

Automatic reconnection

Make a long press

Select the desired contact from the list offered.

On return to the vehicle, if the last telephone

connected is present again, it is automatically

recognised and within about 30 seconds

of switching on the ignition, the pairing is

established automatically (Bluetooth activated).

Calling a recently used number

on the steering mounted TEL button.

Press "Telephone".

Or

Press "End call" on the touch screen.

Press "Calls".

Or

Managing paired telephones

To connect or disconnect a paired telephone:

Make a long press

Making a call

on the steering mounted TEL button.

Select the "Telephone" menu.

Using the telephone is not recommended

while driving.

Parking the vehicle.

Make the call using the steering mounted

controls.

Select the desired contact from the list offered.

Press "Bluetooth" to display the list of

paired devices.

Press on the name of the telephone chosen in the

list to disconnect it.

A call in progress remains active in the

vehicle for 10 minutes after switching off

the ignition. After that, the system switches

off and the call automatically redirects to the

telephone.

Press again to connect it.

Calling a new number

Deleting a telephone

Press "Telephone".

Press the "Bluetooth" button.

It is always possible to make a call

directly from the telephone; as a safety

measure, first park the vehicle.

Press the "Keypad" button.

Press "Manage connections".

In the displayed window select "Delete".

The list of paired devices is displayed.

Press on the name of the telephone to delete.

Enter the phone number using the digital keypad.

Press "OK" to start the call.

Settings

Receiving a call

An incoming call is announced by a ring and a

superimposed display in the screen.

To accept the call:

Make a short press on the steering

mounted TEL button.

To reject the call:

Calling a contact

Adjusting the brightness

Press the "Telephone" menu.

Press "Settings".

Or make a long press

on the steering mounted TEL button.

Press "Contacts".

Select "Display".

180

10

Touch screen BLUETOOTH audio system

Press the buttons to adjust the

brightness of the screen and/or of

Select "Languages" to change the

language.

Radio

The reception quality of the tuned radio station

gradually deteriorates or the station presets are

not working (no sound, 87.5 MHz is displayed,

etc.).

The vehicle is too far from the selected station’s

transmitter, or no transmitter is present in the

geographical area.

►ꢀ Activate the "RDS" function in the upper bar

to enable the system to check whether there is

a more powerful transmitter in the geographical

area.

The environment (hills, buildings, tunnels,

basement car parks, etc.) is blocking reception,

including in RDS mode.

This is a perfectly normal phenomenon, and is not

indicative of an audio system malfunction.

The aerial is missing or has been damaged

(for example while entering a car wash or

underground car park).

►ꢀ Have the aerial checked by a dealer.

I cannot find some radio stations in the list of

received stations.

the instrument panel (depending on version).

Set date and time

Modifying system settings

Press "Settings".

Press "Date/Time".

Press "System".

Press "Privacy" to access the privacy

settings.

Select "Units" to change the units of

distance, fuel consumption and

temperature.

Setting the date:

Press the arrows to set the day, month and

year.

Setting the time:

Press these buttons to set hours and

minutes.

Select or deselect the 24h format.

Press "Factory settings" to return to the

initial settings.

Press "System Info" to check the system

version.

In 12h format, choose "AM" or "PM".

Privacy settings

Three data privacy options are available:

The system does not automatically

manage the change between winter and

summer time.

"No data sharing (data, vehicle position)"

"Only data sharing"

Date format:

Select the display format of the date.

The name of the radio station changes.

The station is no longer received or its name has

changed in the list.

Some radio stations send other information in

place of their name (the title of the song for

example).

“Data and vehicle position sharing"

When data and vehicle position sharing

are enabled, this symbol is displayed in the

upper bar of the touch screen.

Frequently asked

questions

The following information groups together the

answers to the most frequently asked questions

concerning the system.

The system interprets these details as the station

name.

Selecting the language

Press "Settings".

181

10

Touch screen BLUETOOTH audio system

►ꢀ Press the "Radio Settings" button then select

"Update list". The radio reception is cut off while

searching for available stations (approximately

30 seconds).

The telephone's Bluetooth function may be

switched off or the telephone may not be visible.

►ꢀ Check that the telephone has Bluetooth

switched on.

►ꢀ Check in the telephone settings that it is

"visible to all".

The Bluetooth telephone is not compatible with

the system.

►ꢀ Check the compatibility of the telephone on

the Brand's website (services).

The volume of the telephone connected in

Bluetooth mode is inaudible.

The volume depends on both the system and the

telephone.

Ambient noise affects the quality of the telephone

call.

►ꢀ Increase the volume of the audio system, to

maximum if required, and increase the volume of

the telephone if necessary.

Selecting an ambience imposes the treble and

bass settings, and vice versa.

►ꢀ Modify the treble and bass or ambience

settings to obtain the desired musical ambience.

There is a difference in sound quality between

audio sources.

To allow for optimal listening quality, the sound

settings can be tailored to different audio

sources, which can generate audible differences

when changing source.

►ꢀ Check that the sound settings are appropriate

to the sources listened to. Adjust the sound

functions to the middle position.

When the engine is off, the system switches off

after several minutes of use.

When the engine is switched off, the system's

operating time depends on the state of charge of

the battery.

The switch-off is normal: the system

automatically goes into energy economy mode

and switches off to maintain an adequate charge

in the battery.

Media

Playback of my USB memory stick starts only

after a very long wait (around 2 to 3 minutes).

Some files supplied with the memory stick may

greatly slow down access to reading the memory

stick (multiplication by 10 of the cataloguing

time).

►ꢀ Delete the files supplied with the memory

stick and limit the number of sub-folders in the

file structure on the memory stick.

Some characters in information about the

currently playing media are not displayed

correctly.

The audio system is unable to process certain

types of character.

►ꢀ Use standard characters to name tracks and

folders.

►ꢀ Reduce ambient noise (close windows, reduce

ventilation, slow down, etc.).

The contacts are not listed in alphabetical order.

Some telephones offer display options. Depending

on the settings chosen, contacts can be

transferred in a specific order.

►ꢀ Start the vehicle’s engine to increase the

charge of the battery.

Playback of streaming files does not start.

The connected device does not automatically

launch playback.

►ꢀ Modify the telephone directory display

settings.

►ꢀ Start playback from the device.

Track names and playing times are not displayed

on the audio streaming screen.

The Bluetooth profile does not allow the transfer

of this information.

Settings

When the treble and bass settings are changed,

the ambience is deselected.

Telephone

I cannot connect my Bluetooth telephone.

When the ambience is changed, the treble and

bass settings are reset.

Touch screen BLUETOOTH for Your DS 3 Crossback 4 Door First Generation (2018-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals