Access for Your DS 4 4 Door Second Generation (2021-2026)

02  
02 64  
Access  
Remote control key  
System which permits central unlocking or locking of the vehicle using the door lock or from a distance. It is also used to locate and start the vehicle,  
as well as providing protection against theft.  
Unlocking the vehicle  
Unfolding the key  
Complete unlocking using  
the remote control  
Opening the windows using  
the remote control  
F
Press the open padlock to unlock  
the vehicle completely.  
F
Maintain the press on the open  
padlock until the desired position  
is obtained. The windows stop as  
soon as you release the button.  
Selective unlocking using  
the remote control  
Unlocking using the key  
F
Press the open padlock once to  
F
Turn the key forwards in the driver's door  
lock to unlock the vehicle completely.  
unlock the driver's door only.  
F
Press this button to unfold the key.  
F
Press the open padlock again to  
unlock the other doors and the  
boot.  
The direction indicators flash for a  
few seconds.  
The spotlamps in the door mirrors  
come on.  
Depending on version, the door mirrors  
unfold, the welcome lighting comes on,  
the alarm is deactivated.  
The complete or selective door  
unlocking parameter is set via the  
vehicle configuration menu.  
02  
65  
Access  
Locking the vehicle  
Selective unlocking of the boot  
Normal locking using the remote  
control  
F
Press the closed padlock to lock  
the vehicle.  
F
Press the central button on the  
remote control to unlock the  
boot. The doors remain locked.  
If one of the doors or the boot is still  
open, the central locking does not take  
place.  
However, the alarm (if present) will  
be completely activated after about  
45 seconds.  
If the vehicle is unlocked inadvertently  
and with no action on the doors or  
boot, the vehicle will lock itself again  
automatically after about 30 seconds.  
If the alarm had previously been  
activated, it will not be reactivated  
automatically.  
If selective unlocking of the boot is deactivated,  
pressing this button also unlocks the doors.  
Normal locking using the key  
F
Turn the key towards the rear in the driver's  
door lock to lock the vehicle.  
Don't forget to lock the boot again by  
pressing the closed padlock button.  
The direction indicators flash for a  
few seconds.  
Depending on version, the door mirrors fold,  
the alarm is activated.  
The complete or selective boot  
unlocking parameter is set via the  
vehicle configuration menu.  
Selective unlocking of the boot is  
activated by default.  
The folding and unfolding of the door  
mirrors using the remote control can be  
deactivated by a CITROËN dealer or a  
qualified workshop.  
02 66  
Access  
Deadlocking using the remote  
control  
Deadlocking using the key  
F
Press the closed padlock to lock  
the vehicle completely.  
F
F
Turn the key to the rear in the driver's door  
lock to lock the vehicle completely.  
Turn the key to the rear again within five  
seconds to deadlock the vehicle.  
Deadlocking renders the exterior and  
interior door controls inoperative.  
It also deactivates the central locking  
control button.  
Therefore, never leave anyone inside  
the vehicle when it is deadlocked.  
F
Press the closed padlock again  
within five seconds to deadlock  
the vehicle.  
Deadlocking is confirmed by fixed lighting  
of the direction indicators for approximately  
two seconds.  
According to version, the door mirrors fold at  
the same time.  
In low light, deadlocking also brings on the  
guide-me-home lighting.  
For more information on the guide-me-home  
lighting, refer to the corresponding section.  
02  
67  
Access  
Folding the key  
Locating your vehicle  
This function allows you to identify your vehicle  
from a distance, particularly in poor light. Your  
vehicle must be locked.  
Closing the windows using  
the remote control  
F
Press and hold the closed  
padlock button until the desired  
position is obtained. The  
windows stop when you release  
the button.  
F
Press this button.  
This will switch on the courtesy lamps and  
the direction indicators will flash for around  
ten seconds.  
When closing the windows using the  
remote control you must ensure that  
nothing prevents them from closing  
correctly.  
F
Press this button before folding the key.  
If you want to leave the windows  
partly open, you must deactivate the  
volumetric alarm monitoring.  
If you do not press the button, there is a  
risk of damaging the remote control.  
02 68  
Access  
Back-up control  
System allowing the doors to be locked and  
unlocked manually in the event of a malfunction  
of the central locking system or battery failure.  
Locking the passenger doors  
Unlocking the passenger doors  
F
Pull the interior door opening control.  
F
F
Open the doors.  
On the rear doors, check that the child lock  
is not on.  
For more information on the Child lock, refer  
to the corresponding section.  
Locking the driver's door  
F
Insert the key in the door lock, then turn it  
to the rear.  
You can also apply the procedure described for  
the passenger doors.  
Unlocking the driver's door  
F
Insert the key in the door lock, then turn it  
to the front.  
F
F
Remove the black cap, located on the edge  
of the door, using the key.  
Insert the key in the socket without forcing  
it, then without turning it, move the latch  
sideways towards the inside of the door.  
Remove the key and refit the cap.  
F
F
Close the doors and check that the vehicle  
has locked correctly from the outside.  
02  
69  
Access  
Fault with the remote control  
In the event of a malfunction with the remote  
control, you can no longer unlock, lock or  
locate your vehicle.  
Changing the battery  
Battery ref.: CR2032/3 volts.  
If the battery is flat, you are informed  
F
First of all, use the key in the lock to unlock  
or lock your vehicle.  
Then, reinitialise the remote control.  
by illumination of this warning lamp,  
an audible signal and a message in  
the screen.  
F
Reinitialisation  
F
Switch off the ignition and remove the  
ignition key.  
F
Unclip the cover using a small screwdriver  
at the two cutouts.  
Lift off the cover.  
Remove the flat battery from its location.  
Fit the new battery into its location  
observing the original direction of fitment.  
Clip the cover onto the casing.  
F
Press the closed padlock immediately for a  
few seconds.  
Turn the key to position 2 (Ignition on).  
Switch off the ignition and remove the key  
from the ignition switch.  
F
F
F
F
F
F
The remote control is fully operational again.  
If the problem persists, contact a  
CITROËN dealer as soon as possible.  
02 70  
Access  
"Keyless Entry and Starting"  
Unlocking the vehicle  
The vehicle or just the driver's door is unlocked,  
depending on the setting.  
Selective unlocking  
F
To unlock only the drivers door, with the  
electronic key on your person, pass your  
hand behind the driver's door handle.  
To unlock the complete vehicle, pass your  
hand behind one of the door handle of the  
front passenger door with the electronic  
key close to the passenger door, or  
press the tailgate opening control with  
the electronic key close to the rear of the  
vehicle.  
Complete unlocking  
F
System which permits the unlocking, locking  
and starting of the vehicle while keeping the  
electronic key on your person.  
Activation or deactivation of the selective  
unlocking is done in the "Driving" menu, then  
"Vehicle settings".  
The electronic key can also be used as  
a remote control.  
For more information on the Remote  
control key, refer to the corresponding  
section.  
F
With the electronic key on your person and  
in the recognition zone A, pass your hand  
behind the door handle of one of the front  
doors to unlock the vehicle or press the  
tailgate opening control.  
By default, complete unlocking is activated.  
The direction indicators flash for a few  
seconds.  
Depending on version, the door mirrors  
unfold, the welcome lighting comes on,  
the alarm is deactivated.  
02  
71  
Access  
As a safety measure (children on  
board), never leave the vehicle without  
taking the electronic key for the Keyless  
Entry and Starting system with you,  
even for a short period.  
If one of the doors or the boot is still  
open or if the electronic key for the  
Keyless Entry and Starting system has  
been left inside the vehicle, the central  
locking does not take place.  
Be aware of the risk of theft when the  
electronic key for the Keyless Entry and  
Starting system is in one of the defined  
zones with the vehicle unlocked.  
However, the alarm (if fitted) will be  
fully activated after about 45 seconds.  
If the vehicle is unlocked by mistake  
and with no action on the doors or boot,  
the vehicle will lock again automatically  
after about 30 seconds.  
If fitted to your vehicle, the alarm will  
also be reactivated automatically.  
In order to preserve the battery in the  
electronic key and the vehicle's battery,  
the "hands-free" functions are put into  
long-term standby after 21 days without  
use. To restore these functions, press  
one of the remote control buttons or  
start the engine with the electronic key  
in the reader.  
The automatic folding and unfolding  
of the door mirrors can be deactivated  
by a CITROËN dealer or a qualified  
workshop.  
For more information on starting with  
Keyless Entry and Starting, refer to  
the corresponding section.  
02 72  
Access  
Locking the vehicle  
Normal locking  
Deadlocking  
Deadlocking renders the interior door  
controls inoperative.  
It also deactivates the central locking  
button.  
Therefore, never leave anyone inside  
the vehicle when it is deadlocked.  
By the doors:  
F
With the electronic key on your person  
and in the recognition zone A, press with a  
finger or thumb on one of the door handles  
(at the markings).  
F
With the electronic key in the recognition  
zone A, press a finger or thumb on one of  
the front door handles (at the markings) to  
lock the vehicle.  
Maintaining pressure allows the windows to be  
raised to the desired position.  
F
Within five seconds, press the door handle  
again to deadlock the vehicle.  
02  
73  
Access  
Locating your vehicle  
This function allows you to identify your vehicle  
from a distance, particularly in poor light. Your  
vehicle must be locked.  
F
Press this button.  
For reasons of safety and theft protection,  
do not leave your electronic key in the  
vehicle, even when you are close to it.  
It is recommended that you keep it on  
your person.  
This will switch on the courtesy lamps and  
the direction indicators will flash for around  
ten seconds.  
Ensure that nothing could prevent the  
correct operation of the windows.  
Be particularly aware of children when  
operating the windows.  
Accumulations (water, dust, grime,  
salt...) on the inner surface of the door  
handle may affect detection.  
If cleaning the inner surface of the door  
handle using a cloth does not restore  
detection, contact a CITROËN dealer  
or a qualified workshop.  
A sudden splash of water (stream of  
water, high pressure jet washer, …)  
may be identified by the system as the  
desire to open the vehicle.  
The direction indicators come on for a  
few seconds.  
Depending on your version, the door  
mirrors fold, the alarm is activated.  
02 74  
Access  
Back-up key integrated in the Keyless Entry and Starting  
The integral key is used to lock and unlock the  
vehicle when the electronic key cannot operate:  
Locking the driver's door  
If the alarm is activated, the audible  
signal triggered on opening a door  
with the key (integral with the remote  
control) will stop when the ignition is  
switched on.  
-
battery flat, vehicle battery discharged or  
disconnected, ...  
-
vehicle located in an area with strong  
electromagnetic signals.  
F
Insert the integral key in the door lock, then  
turn it to the rear.  
Unlocking the driver's door  
F
Insert the integral key in the door lock, then  
turn it to the front.  
F
Maintain a pull on button 1, to extract the  
integral key 2.  
02  
75  
Access  
Changing the battery  
Battery ref.: CR2032 / 3 volts.  
Battery replacement is signalled by the display  
of a message.  
Locking the passenger doors  
Unlocking the passenger doors  
F
F
Open the doors.  
On the rear doors, check that the child lock  
is not on.  
F
Pull the interior door opening control.  
For more information on the Child lock, refer  
to the corresponding section.  
F
Unclip the cover using a small screwdriver  
at the cut-out.  
F
F
F
Lift off the cover.  
Remove the flat battery from its location.  
Fit the new battery into its location  
observing the original direction of fitment.  
Clip the cover onto the casing.  
F
F
Remove the black cap, located on the edge  
of the door, using the integral key.  
Insert the integral key in the socket without  
forcing it, then without turning it, move the  
latch sideways towards the inside of the  
door.  
F
F
F
Remove the integral key and refit the cap.  
Close the doors and check that the vehicle  
has locked correctly from the outside.  
02 76  
Access  
Remote control problem / reinitialisation  
Following disconnection of the vehicle battery, replacement of the remote control battery or in the  
event of a remote control malfunction, you can no longer unlock, lock or locate your vehicle.  
F
Place the back-up key (integral with the  
remote control) in the lock to unlock your  
vehicle.  
F
F
Open the front armrest.  
● Raise the mat by its tongue and remove  
it.  
● Place the electronic key on the back-up  
reader.  
Switch on the ignition by pressing  
the "START/STOP" button.  
The electronic key is fully operational again.  
Remember to refit the mat below the armrest  
after removing the reinitialised electronic key.  
If the problem persists, contact a CITROËN dealer  
or a qualified workshop as soon as possible.  
02  
77  
Access  
Lost keys, remote control,  
electronic key  
Visit a CITROËN dealer with the vehicle's  
registration certificate, your personal  
identification documents and if possible,  
the label bearing the key code.  
The CITROËN dealer will be able to  
retrieve the key code and the transponder  
code required to order a new key  
Locking the vehicle  
When purchasing a second-  
hand vehicle  
Driving with the doors locked may make  
access to the passenger compartment by  
the emergency services more difficult in an  
emergency.  
As a safety precaution (with children on  
board), remove the key from the ignition or  
take the electronic key when you leave the  
vehicle, even for a short time.  
Have the key codes memorised by a  
CITROËN dealer, to ensure that the  
keys in your possession are the only  
ones which can start the vehicle.  
Electrical interference  
Do not throw the remote control  
batteries away, they contain metals  
which are harmful to the environment.  
Take them to an approved collection  
point.  
The Keyless Entry and Starting electronic  
key may not operate if close to certain  
electronic devices: telephone, laptop  
computer, strong magnetic fields, ...  
Remote control  
The high frequency remote control is a  
sensitive system; do not operate it while  
it is in your pocket as there is a possibility  
that it may unlock the vehicle, without you  
being aware of it.  
Do not repeatedly press the buttons of your  
remote control out of range and out of sight  
of your vehicle. You run the risk of stopping  
it from working and the remote control  
would have to be reinitialised.  
Anti-theft protection  
Do not make any modifications to the  
electronic engine immobiliser system; this  
could cause malfunctions.  
For vehicles with an ignition switch, do  
not forget to remove the key and turn the  
steering to engage the steering lock.  
The remote control does not operate when  
the key is in the ignition, even when the  
ignition is switched off.  
02 78  
Access  
Central locking control  
This control allows the simultaneous locking or unlocking of the doors and boot from inside the  
vehicle.  
Locking  
Unlocking  
F
Press the button again to unlock the  
vehicle.  
The red indicator lamp in the button goes off.  
When locking / deadlocking  
from the outside  
When the vehicle is locked or  
deadlocked from the outside, the red  
warning lamp flashes and the button is  
inoperative.  
F
Press this button to lock the vehicle.  
F
With normal locking, pull the  
interior door control lever to unlock  
the vehicle.  
The red indicator lamp in the button comes on.  
F
With deadlocking, you have to use  
the remote control or the key to  
unlock the vehicle.  
If one of the doors is open, central  
locking from the inside does not take  
place.  
02  
79  
Access  
Anti-intrusion security  
This system allows automatic simultaneous locking of the doors and boot as soon as the speed of  
the vehicle exceeds 6 mph (10 km/h).  
Operation  
Activation / Deactivation  
If one of the doors or the boot is open, the  
You can activate or deactivate this function  
automatic central locking does not take place.  
permanently.  
This is signalled by the sound of  
the locks rebounding, accompanied  
by illumination of this symbol in the  
instrument panel, an audible signal  
and the display of an alert message.  
Carrying long or  
voluminous objects  
If you want to drive with the boot open,  
you should press the central locking  
button to lock the doors. Otherwise,  
every time the speed of the vehicle  
exceeds 6 mph (10 km/h), the locks  
will rebound and the alerts mentioned  
above will appear.  
F
With the ignition on, press this button  
until an audible signal starts and a  
corresponding message is displayed.  
The state of the system stays in memory when  
switching off the ignition.  
Driving with the doors locked may  
render access for the emergency  
services difficult in an emergency.  
Pressing the central locking button unlocks the  
vehicle.  
Above 6 mph (10 km/h), this unlocking is  
temporary.  
02 80  
Access  
Doors  
Opening  
Closing  
When a door is not closed correctly:  
From outside  
From inside  
-
with the engine running or the  
vehicle moving (speed below  
6 mph (10 km/h)), this warning  
lamp comes on, accompanied  
by an alert message for a few  
seconds.  
-
with the vehicle moving (speed above  
6 mph (10 km/h)), in addition to the warning  
lamp and alert message, there is an  
audible signal for a few seconds.  
F
Pull the interior control lever of a front door;  
this unlocks the vehicle completely.  
With the selective unlocking activated:  
F
After unlocking the vehicle or with the  
electronic key of the Keyless Entry and  
Starting system in the recognition zone,  
pull the door handle.  
-
-
opening the driver's door unlocks  
the driver's door only (if the vehicle  
has not already been completely  
unlocked).  
opening the passenger's door  
unlocks the rest of the vehicle.  
When the selective unlocking is  
activated, the first press of the remote  
control unlocking button permits  
unlocking of the driver's door only.  
The interior door controls do  
not operate when the vehicle is  
deadlocked.  
02  
81  
Access  
Boot  
Opening  
Closing  
The vehicle or just the boot is unlocked,  
depending on the setting.  
F
Lower the tailgate using one of the interior  
grab handles.  
Selective unlocking  
By default, complete unlocking is activated.  
This setting is done in the "Driving" menu,  
then "Vehicle settings" and "Vehicle  
access".  
Complete unlocking  
If the boot is not closed correctly:  
with the engine running or the  
vehicle moving (speed below  
-
6 mph (10 km/h)), this warning  
lamp comes on, accompanied by  
the display of an alert message  
for a few seconds.  
When unlocking of the boot only is activated:  
F
With the electronic key on your person and  
in the recognition zone A, press the boot  
unlocking control to unlock just the boot,  
then raise the tailgate.  
-
with the vehicle moving (speed above  
6 mph (10 km/h)), in addition to the warning  
lamp and alert message, there is an an  
audible signal for a few seconds.  
Unlocking is signalled by rapid flashing of the  
direction indicators for a few seconds.  
F
After unlocking the vehicle or the boot with  
the Keyless Entry and Starting system  
electronic key on your person in the  
recognition zone A, press the boot opening  
control then raise the tailgate.  
Use this button for access to  
additional information.  
02 82  
Access  
Back-up release  
To manually unlock the boot in the event of a  
battery or central locking failure.  
Unlocking  
Locking after closing  
If the fault persists after closing again, the boot  
will remain locked.  
F
F
F
Fold back the rear seats to gain access to  
the lock from inside the boot.  
Insert a small screwdriver into hole A of the  
lock to unlock the tailgate.  
Move the latch to the left.  
02  
83  
Access  
Alarm*  
System which protects and provides a deterrent against theft and break-ins. It provides the following types of monitoring:  
-
exterior perimeter  
-
tilt  
For all work on the alarm system,  
contact a CITROËN dealer or a  
qualified workshop.  
The system checks for opening of the vehicle.  
The alarm is triggered if anyone tries to open a  
door, the boot, the bonnet...  
The system checks for any change in the  
attitude of the vehicle.  
The alarm is triggered if the vehicle is lifted,  
moved or knocked.  
-
interior volumetric  
Self-protection function  
The system checks for any variation in the  
volume in the passenger compartment.  
The alarm is triggered if anyone breaks a  
window, enters the passenger compartment or  
moves inside the vehicle.  
The system checks for the putting out of  
service of its components.  
The alarm is triggered if the battery, the central  
control or the siren wiring are put out of service  
or damaged.  
* Depending on the country of sale.  
02 84  
Access  
Locking the vehicle with full alarm system  
Activation  
Deactivation  
The monitoring system is active: the indicator  
F
Press the unlocking button on the remote  
lamp in the button flashes once per second  
and the direction indicators come on for about  
2 seconds.  
Following an instruction to lock the vehicle,  
the exterior perimeter monitoring is activated  
after a delay of 5 seconds and the interior  
volumetric and anti-tilt monitoring after a delay  
of 45 seconds.  
control.  
or  
F
Unlock the vehicle with the "Keyless Entry  
and Starting" system.  
The monitoring system is deactivated: the  
indicator lamp in the button goes off and the  
direction indicators flash for about 2 seconds.  
If an opening (door, boot...) is not closed  
fully, the vehicle is not locked but the exterior  
perimeter monitoring will be activated after a  
delay of 45 seconds at the same time as the  
interior volumetric and anti-tilt monitoring.  
F
Switch off the ignition and get out of the  
vehicle.  
Lock the vehicle with the remote control.  
When the vehicle automatically locks  
itself again (as happens if a door or  
boot is not opened within 30 seconds of  
unlocking), the monitoring system is not  
reactivated automatically. To reactivate  
the system, it is necessary to unlock  
the vehicle and then lock it again using  
the remote control or the "Keyless  
Entry and Starting" system.  
F
or  
F
Lock the vehicle with the "Keyless Entry  
and Starting" system.  
02  
85  
Access  
Locking the vehicle with exterior perimeter monitoring only  
Deactivate the interior volumetric and anti-tilt  
monitoring to avoid unwanted triggering of the  
alarm in certain cases such as:  
Deactivating the interior volumetric  
and anti-tilt monitoring  
-
-
-
-
-
-
leaving a pet in the vehicle,  
leaving a window partially open,  
washing your vehicle,  
changing a wheel,  
having your vehicle towed,  
transport by sea.  
To be effective, this deactivation must  
be carried out each time the ignition is  
switched off.  
Reactivating the interior volumetric  
and anti-tilt monitoring  
F
Deactivate the perimeter monitoring by  
unlocking the vehicle with the remote  
control or the Keyless Entry and Starting  
system.  
F
Switch off the ignition and within  
ten seconds, press the button until the  
indicator lamp is on continuously.  
Get out of the vehicle.  
Immediately lock the vehicle using the  
remote control or the Keyless Entry and  
Starting system.  
The indicator lamp in the button goes off.  
Reactivate all monitoring by locking the  
vehicle with the remote control or the  
Keyless Entry and Starting system.  
The indicator lamp in the button flashes  
once per second again.  
F
F
F
The exterior perimeter monitoring alone is  
activated: the indicator lamp in the button  
flashes once per second.  
02 86  
Access  
Triggering of the alarm  
Failure of the remote control  
Operating fault  
This is indicated by sounding of the siren  
and flashing of the direction indicators for  
thirty seconds.  
The monitoring functions remain active until  
the alarm has been triggered eleven times in  
succession.  
To deactivate the monitoring functions:  
When the ignition is switched on, fixed  
illumination of the indicator lamp in the button  
indicates a fault with the system.  
Have it checked by a CITROËN dealer or a  
qualified workshop.  
F
unlock the vehicle using the key (integral to  
the remote control) in the driver's door lock,  
open the door; the alarm is triggered,  
switch on the ignition; the alarm stops; the  
indicator lamp in the button goes off.  
F
F
When the vehicle is unlocked using the remote  
control or the Keyless Entry and Starting  
system, rapid flashing of the indicator lamp  
in the button informs you that the alarm was  
triggered during your absence. When the  
ignition is switched on, this flashing stops  
immediately.  
Locking the vehicle without  
activating the alarm  
F
Lock or deadlock the vehicle using the  
key (integral to the remote control) in the  
driver's door lock.  
02  
87  
Access  
Electric windows  
Fitted with a safety anti-pinch system.  
One-touch electric windows  
Manual mode  
The electric window controls remain  
F
Press or pull the control gently.  
The window stops when the  
control is released.  
operational for approximately  
45 seconds after the ignition is  
switched off or until the vehicle is  
locked after a door is opened.  
If the passenger 's window cannot be  
operated from the driver's door control  
panel, carry out the operation from the  
passenger's door control panel, and  
vice versa.  
Automatic mode  
F
Press or pull the control firmly.  
1. Left hand front window control.  
2. Right hand front electric window control.  
The window opens or closes fully  
when the control is released.  
Pressing the control again stops  
the movement of the window.  
F
After approximately ten consecutive  
complete opening/closing movements  
of the window, a protection function is  
activated which only authorises closing  
of the window to prevent damage to the  
electric window motor.  
Once the window is closed, the controls  
will become available again after  
approximately 40 minutes.  
02 88  
Access  
Safety anti-pinch  
Reinitialisation  
When the window rises and meets an obstacle,  
it stops and partially lowers again.  
If a window does not rise automatically, its  
operation must be reinitialised.  
If an obstacle is encountered during  
operation of the electric windows, you  
must reverse the movement of the  
window. To do this, press the control  
concerned.  
When the driver operates the  
passenger's electric window control,  
they must ensure that nothing is  
preventing the windows closing  
correctly.  
The driver must ensure that the  
passengers use the electric windows  
correctly.  
Be particularly aware of children when  
operating the windows.  
Be aware of passengers and/or other  
persons present when closing the  
windows with the key or the "Keyless  
Entry and Starting" system.  
Always remove the key from the ignition  
when leaving the vehicle, even for a  
short time.  
F
F
Pull the control until the window stops.  
Release the control and pull it again until  
the window closes fully.  
If the window cannot be closed (for  
example, in the presence of ice), once  
the window has lowered:  
F
Continue to hold the control for  
approximately one second after the window  
has closed.  
F
F
F
press and hold the control until the  
window opens fully,  
F
F
Press the control to lower the window  
automatically to the low position.  
When the window has reached the low  
position, press the control again for  
approximately one second.  
then pull the control immediately  
and hold it until the window closes,  
continue to hold the control for  
approximately one second after the  
window has closed.  
The safety anti-pinch function is not  
operational during these operations.  
The safety anti-pinch function is not  
operational during these operations.  
02  
89  
Access