Get Driving -> Speed Settings / Cruise Control Guide for DS 4 4 Door Second Generation (2021-2026)

06

213

Driving

Memorising speeds

This function allows speed settings to be registered which will then be offered as settings for two systems: the speed limiter (a maximum speed) and

the cruise control (cruising speed).

You can memorise up to six speed settings in the system, depending on version. By default, some speed settings are already memorised.

With your Audio system

Activating the function

"MEM" button

Modifying a speed setting

F

Select the speed setting to be modified and

confirm.

F

Modify the speed setting.

Select "OK" and confirm to save the

modifications.

As a safety measure, the driver must

only modify a speed setting when

stationary.

F

Press this button to display the list of

memorised speed settings.

F

Go to the main menu by pressing the

"MENU" button:

Select the "Personalisation-configuration"

menu and confirm.

Select "Vehicle parameters" menu and

confirm.

Select the "Driving assistance" line and

conform.

Select "Speeds memorised" line and

confirm.

Select "Activation" to activate the function.

06 ₂₁₄

Driving

With the touch screen tablet

"MEM" button

Modifying a speed setting

F

Press this button to select the

"Driving" menu.

F

In the secondary page, press

"Speed settings".

F

Select the system for which you want to

memorise new speed settings:

Press this button to select a speed settings for

use by the speed limiter or cruise control.

For more information on the Speed limiter

and/or the Cruise control, refer to the

corresponding section.

F

Enter the new value using the numerical

keypad and confirm.

Confirm to save the modification and quit

the menu.

●

speed limiter

or

●

cruise control.

F

Choose the speed setting to be modified.

06

215

Driving

Speed limiter

System which prevents the vehicle from exceeding the speed programmed by the driver.

Steering mounted controls

Displays in the instrument panel

The speed limiter is switched on manually.

The minimum programmed speed is

20 mph (30 km/h).

The programmed speed remains in the

system memory when the ignition is

switched off.

The speed limiter is a driving aid that

cannot, in any circumstances, replace the

need to observe speed limits or the need

for vigilance on the part of the driver.

1. Speed limiter mode selection wheel.

2. Programmed value decrease button.

3. Programmed value increase button.

4. Speed limiter on / pause button.

6. Speed limiter on / pause indication.

7. Speed limiter mode selection indication.

8. Programmed speed value.

9. Selection of a memorised speed setting.

5. Display memorised speed settings button.

06 ₂₁₆

Driving

Switching on

Adjusting the limit speed setting

You do not have to switch the speed limiter on

in order to set the speed.

To modify the limit speed setting from the

current speed of the vehicle:

F

in steps of +/- 1 mph (km/h), make

successive short presses on button 2 or 3,

continuously, in steps of +/- 5 mph (km/h),

press and hold button 2 or 3.

To modify the limit speed setting using

memorised speeds and from your Audio

system:

F

first activate the system,

make a long press on button 2 or 3, the

system displays the memorised speed

closest to the actual speed of the vehicle;

this setting becomes the new limit speed,

to choose another memorised speed, make

another long press on button 2 or 3.

F

Turn the wheel 1 to the "LIMIT" position

to select the speed limiter; the function is

paused.

For more information on Memorising speeds,

refer to the corresponding section.

To modify the limit speed setting using

memorised speeds and from the touch screen:

F

press button 5 to display the six memorised

speed settings,

press the button for the desired speed

setting.

F

If the speed setting is suitable (last speed

setting programmed in the system) press

button 4 to switch the speed limiter on.

Pressing button 4 temporarily interrupts the

function (pause).

This setting becomes the new limit speed.

06

217

Driving

Temporarily exceeding the programmed speed

Operating fault

When the limit speed is exceeded but is not

due to action by the driver, there is an audible

signal to complete the alert.

F

If you want to temporarily exceed the

programmed limit speed, press firmly on

the accelerator pedal, going beyond the

point of resistance.

Flashing dashes indicate a fault with the speed

limiter.

Have it checked by a CITROËN dealer or a

qualified workshop.

Once the speed of the vehicle returns to

the programmed setting, the speed limiter

functions again: the display of the programmed

speed setting becomes steady again.

The speed limiter is deactivated temporarily

and the displayed programmed speed flashes.

The use of mats not approved by

CITROËN may interfere with the

operation of the speed limiter.

To avoid any risk of jamming of the

pedals:

On a steep descent or in the event of

sharp acceleration, the speed limiter will

not be able to prevent the vehicle from

exceeding the programmed speed.

-

ensure that the mat is positioned

correctly,

Switching off

F

Turn wheel 1 to the "0" position: the

display of information on the speed limiter

disappears.

-

do not fit one mat on top of another.

06 ₂₁₈

Driving

Cruise control

System which automatically maintains the cruising speed of the vehicle at a setting programmed by the driver, without any action on the accelerator

pedal.

Steering mounted controls

Displays in the instrument panel

The cruise control is switched on

manually.

It requires a minimum vehicle speed of

25 mph (40 km/h) as well as:

-

with a manual gearbox, the

engagement of fourth gear or

higher,

with an automatic gearbox, the

gear selector at position D or

second gear or higher in manual

mode.

1. Cruise control mode selection wheel.

2. Button for setting the current speed of the

vehicle as the cruise setting or lowering the

cruise setting.

3. Button for setting the current speed of the

vehicle as the cruise setting or raising the

cruise setting.

6. Cruise control pause / resume indication.

7. Cruise control mode selected indication.

8. Cruise speed setting.

The operation of the cruise control can be

interrupted (pause):

-

by pressing control 4 or by pressing the

brake or clutch pedal,

9. Selecting a memorised cruise speed.

-

automatically, if operation of the dynamic

stability control system is triggered.

4. Cruise control pause / resume button.

5. Display memorised speed settings button.

Switching off the ignition cancels any

programmed speed setting.

The cruise control system is a driving aid

that cannot, in any circumstances, replace

the need to observe speed limits, nor the

need for vigilance on the part of the driver.

As a safety measure, you are advised

to keep your feet near the pedals at all

times.

06

219

Driving

Switching on

To modify the cruise speed setting using

memorised speeds and from the touch screen:

F

press button 5 to display the six memorised

speed settings,

F

press the button for the desired speed

setting.

F

Pressing button 4 interrupts operation of

the system (pause).

Pressing button 4 again restores operation

of the cruise control (ON).

This setting becomes the new cruise speed.

As a precaution, it is recommended

that the cruise speed chosen be close

to the current speed of your vehicle, so

as to avoid any sudden acceleration or

deceleration of the vehicle.

Adjusting the cruise speed

setting

F

Turn the wheel 1 to the "CRUISE" position

to select cruise control mode; the function

is paused.

The cruise control must be activated.

To modify the cruise speed setting using

memorised speeds and from your Audio

system:

To modify the cruise speed setting from the

current speed of the vehicle:

F

first activate the system,

F

in steps of + or - 1 mph (km/h), make

repeated short presses on button 2 or 3,

continuously, in steps of + or - 5 mph (km/h),

press and hold button 2 or 3.

make a long press on button 2 or 3, the

system displays the memorised speed

closest to the actual speed of the vehicle;

this setting becomes the new cruise speed,

to choose another memorised speed, make

another long press on button 2 or 3.

F

To start the cruise control and set a cruise

speed, once the vehicle has reached the

desired speed, press button 2 or 3: the

current speed of your vehicle becomes the

cruise speed setting.

F

Take care: pressing and holding button 2

or 3 results in a rapid change in the

speed of your vehicle.

You can release the accelerator pedal.

For more information on Memorising speeds,

refer to the corresponding section.

06 ₂₂₀

Driving

Temporarily exceeding the

programmed speed

When required (overtaking manoeuvre...), it is

possible to exceed the programmed speed by

pressing the accelerator pedal.

Only use the cruise control if the traffic

conditions will allow you to drive for a

certain time at a steady speed and at a

safe distance from the vehicle ahead.

Do not activate the cruise control

in urban areas, in heavy traffic, on

winding or steep roads, on slippery

or flooded roads, or in conditions of

poor visibility (heavy rain, fog, falling

snow...).

You may have to brake to control the speed of

your vehicle. In this case, the cruise control is

automatically paused.

To activate the system again, press button 4.

In some circumstances, it may not

be possible to maintain or reach the

programmed speed: towing, vehicle

heavily loaded, steep climb.

Switching off

The cruise control is temporarily overridden

and the programmed speed setting flashes.

F

Turn wheel 1 to the "0" position: the cruise

control information disappears from the

screen.

Operating fault

To return to the programmed speed, simply

release the accelerator pedal.

The use of mats not approved by

CITROËN may interfere with the

operation of the cruise control.

To avoid any risk of jamming of the

pedals:

Once the vehicle has returned to the

programmed speed, the cruise control takes

over again: the display of the programmed

speed setting becomes steady again.

Flashing dashes indicate a fault with the cruise

control system.

Have it checked by a CITROËN dealer or a

qualified workshop.

-

ensure that the mat is positioned

correctly,

When descending a steep hill, the

cruise control system cannot prevent

the vehicle from exceeding the

programmed speed.

-

never fit one mat on top of another.

Driving -> Speed Settings / Cruise Control for Your DS 4 4 Door Second Generation (2021-2026)

Related Topics

Driving

Popular Owner Manuals

Latest Owner Manuals