Get DRIVING -> Speed limiter Guide for DS 5 4 Door First Generation (2011-2018)

133

Driving

Speed limiter

System which prevents the vehicle from exceeding the speed programmed by the driver.

Steering mounted controls

displays in the instrument panel

The speed limiter is switched on

manually.

The minimum programmed speed is

20 mph (30 km/h).

The programmed speed remains in the

system memory when the ignition is

switched off.

1. Speed limiter mode selection wheel.

2. Programmed value decrease button.

3. Programmed value increase button.

4. Speed limiter on / pause button.

6. Speed limiter on / pause indication.

7. Speed limiter mode selection indication.

8. Programmed speed value.

9. Selection of a memorised speed setting.

5. Memorised speeds management button.

The speed limiter is a driving aid that

cannot, in any circumstances, replace the

need to observe speed limits or the need

for vigilance on the part of the driver.

This information also appears in the

head-up display.

For more information, refer to the

"Head-up display" section.

Switching on

Adjusting the limit speed

setting

You do not have to switch the speed limiter on

in order to set the speed.

To modify the limit speed setting from the

current speed of the vehicle:

F

in steps of +/- 1 mph (km/h), make

successive short presses on button 2 or 3,

continuously, in steps of +/- 5 mph (km/h),

press and hold button 2 or 3.

To modify the limit speed setting using

memorised speeds and from your Audio

system:

F

with the system first activated (see

"Memorising speeds"),

F

Turn the wheel 1 to the "LIMIT" position

to select the speed limiter; the function is

paused.

F

make a long press on button 2 or 3, the

system displays the memorised speed

closest to the actual speed of the vehicle;

this setting becomes the new limit speed,

to choose another memorised speed, make

another long press on button 2 or 3.

F

If the speed setting is suitable (last speed

setting programmed in the system) press

button 4 to switch the speed limiter on.

To modify the limit speed setting using

memorised speeds and from the touch screen

tablet:

F

press button 5 to display the six memorised

speed settings,

F

press the button for the desired speed

setting.

This setting becomes the new limit speed.

F

Pressing button 4 temporarily interrupts the

function (pause).

135

Driving

Temporarily exceeding the

programmed speed

Switching off

Operating fault

F

Turn wheel 1 to the "0" position: the

display of information on the speed limiter

disappears.

Flashing dashes indicate a fault with the speed

limiter.

F

If you want to temporarily exceed the

programmed limit speed, press firmly on

the accelerator pedal, going beyond the

point of resistance.

The speed limiter is deactivated temporarily

and the displayed programmed speed flashes.

Have it checked by a CITROËN dealer or a

qualified workshop.

On a steep descent or in the event of

sharp acceleration, the speed limiter

will not be able to prevent the vehicle

from exceeding the programmed speed.

The use of mats not approved by

CITROËN may interfere with the

operation of the speed limiter.

To avoid any risk of jamming of the

pedals:

When the limit speed is exceeded but is not

due to action by the driver, there is an audible

signal to complete the alert.

-

ensure that the mat is positioned

correctly,

do not fit one mat on top of another.

-

Once the speed of the vehicle returns to

the programmed setting, the speed limiter

functions again: the display of the programmed

speed setting becomes steady again.

DRIVING -> Speed limiter for Your DS 5 4 Door First Generation (2011-2018)

Related Topics

DRIVING

Popular Owner Manuals

Latest Owner Manuals