MONITORING -> Gauges and indicators for Your DS 5 4 Door First Generation (2011-2018)

coolant  
temperature gauge  
After driving for a few minutes, the temperature  
and pressure in the cooling system increase.  
To top up the level:  
F
F
wait for the engine to cool,  
unscrew the cap by two turns to allow the  
pressure to drop,  
F
F
when the pressure has dropped, remove  
the cap,  
top up the level to the "MAX" mark.  
With the engine running:  
-
-
in zone A, the temperature is correct,  
in zone B, the temperature is too high; the  
central STOP warning lamp comes on,  
accompanied by an audible signal and a  
message in the instrument panel screen.  
Be aware of the risk of burns when  
topping up the cooling system. Do not  
fill above the maximum level (indicated  
on the reservoir).  
You MUST stop as soon as it is safe to do so.  
Wait a few minutes before switching off the  
engine.  
Contact a CITROËN dealer or a qualified  
workshop.  
33  
Monitoring  
Service indicator  
More than 1 800 miles (3 000 km)  
remain before the next service  
is due  
When the ignition is switched on, no service  
information appears in the instrument panel  
screen.  
Between 600 miles (1 000 km) and 1 800 miles  
(3 000 km) remain before the next service is due  
For a few seconds after the ignition is switched  
on, the spanner symbolising the service  
operations comes on and a message is  
displayed in the instrument panel indicating  
the distance or time remaining before the next  
service is due.  
Example: 1 700 miles (2 800 km) remain  
before the next service is due.  
When the ignition is switched on, the  
instrument panel screen temporarily indicates:  
System which informs the driver when the  
next service is due, in accordance with the  
manufacturer's service schedule.  
The point at which the service is due is  
calculated from the last service indicator reset  
to zero, according to the mileage covered and  
the time elapsed since the last service.  
A few seconds after the ignition is switched on,  
the spanner goes off.  
For BlueHDi Diesel versions, depending  
on the country of sale, the degree of  
deterioration of the engine oil may also  
be taken into account.  
Less than 600 miles (1 000 km)  
Service overdue  
The spanner may come on if you  
have exceeded the period since  
the last service, as indicated in the  
manufacturer's service schedule.  
For BlueHDi Diesel versions, the  
spanner may also come on early,  
according to the level of deterioration  
of the engine oil, which depends on the  
driving conditions in which the vehicle  
is used.  
remain before the next service is due  
For a few seconds after the ignition is switched on,  
the spanner flashes to indicate that the service  
must be carried out as soon as possible.  
Example: the service is overdue by 300 miles  
(500 km).  
Example: 500 miles (900 km) remain before  
the next service is due.  
For a few seconds after the ignition is switched  
on, the instrument panel screen indicates:  
When the ignition is switched on, the instrument  
panel screen indicates:  
After the message disappears, the spanner  
remains on alongside the mileage recorder as  
a reminder that a service must be carried out  
soon.  
The spanner remains on alongside the  
mileage recorder to indicate that a service is  
overdue.  
With BlueHDi Diesel versions, the  
Service warning lamp also comes on  
when the ignition is switched on.