Get DS CONNECT NAV Guide for DS 7 Crossback 4 Door First Generation (2017-2022)

218

11

DS CONNECT NAV

– Watching a video (the video stops when the

vehicle starts to move again).

– Changing the system settings and

configuration.

Use the menu buttons on either side of or below

the touch screen for access to the menus, then

press the virtual buttons in the touch screen.

Display the rolling menus at any time by pressing

the screen briefly with three fingers.

DS CONNECT NAV

All of the touch areas of the screen are white.

Press the back arrow to go back a level.

Press "OK" to confirm.

The system is protected in such a way

that it will only operate in the vehicle.

The Energy Economy Mode message is

displayed when the system is about to enter

the corresponding mode.

The touch screen is of the "capacitive"

type.

To clean the screen, use a soft, non-abrasive

cloth (e.g. spectacles cloth) with no additional

product.

Do not use sharp objects on the screen.

Do not touch the screen with wet hands.

System and map updates can be

downloaded from the Brand’s website.

The update procedure is also available on the

website.

GPS navigation - Applications

- Multimedia audio system -

Bluetooth^®telephone

Certain information is displayed permanently

in the side bars or in the upper bar of the touch

screen (depending on equipment):

– Air conditioning status information

(depending on version), and direct access to the

corresponding menu.

– Go directly to the audio source selection option,

to view the list of radio stations (or list of titles

depending on the source).

– Go to the "Notifications" of messages, emails,

map updates and, depending on the services, the

navigation notifications.

– Go to the settings for the touch screen and the

digital instrument panel.

Audio source selection (depending on equipment):

– FM/DAB/AM radio stations (depending on

equipment).

The system’s Open Source Software (OSS)

source codes are available at the

following addresses:

The functions and settings described vary

according to the vehicle version and

configuration.

For safety reasons and because they

require sustained attention by the driver,

the following operations must be carried out

with the vehicle stationary and the ignition on:

– Pairing the smartphone with the system in

Bluetooth mode.

First steps

With the engine running, a press mutes the

sound.

With the ignition off, a press turns the system on.

Increase or decrease the volume using the wheel

or the "plus" or "minus" buttons (depending on

the equipment).

– Using the smartphone.

– Connection to the CarPlay^®, MirrorLink^TM

or Android Auto applications (certain

applications interrupt their display while the

vehicle is moving).

219

11

DS CONNECT NAV

– Telephone connected via Bluetooth and

Bluetooth multimedia broadcast (streaming).

– USB memory stick.

– Media player connected via the auxiliary socket

(depending on equipment).

Radio: display the list of stations.

Steering mounted controls

Media: display the list of tracks.

Radio (press and hold): update the list of stations

received.

Voice control:

This control is located on the steering

wheel or at the end of the lighting control stalk

(depending on equipment).

Short press, system voice control.

Long press, voice control for smartphone or

CarPlay^®, MirrorLink^TM(availability depending on

country), Android Auto via the system.

Increase volume.

– Video (depending on equipment).

Menus

Connected navigation

Decrease volume.

Mute by pressing the volume increase and

decrease buttons simultaneously (depending on

equipment).

Restore the sound by pressing one of the two

volume buttons.

In the "Settings" menu, it is possible to

create a profile for an individual or for a

group of people with shared interests, and

configure a wide range of settings (radio

presets, audio settings, navigation history,

favourite contacts, etc.). Settings are applied

automatically.

Media (short press): change the

multimedia source.

Telephone (short press): start telephone

call.

Enter navigation settings and choose a

destination.

Use real-time services, depending on equipment.

Call in progress (short press): access telephone

menu.

Telephone (long press): reject an incoming call,

end call; when no call is in progress, access

telephone menu.

Radio (rotate): automatic search for the

previous / next station.

Media (rotate): previous / next track, move in a

list.

In very hot conditions, the volume may be

limited to protect the system. It may enter

standby mode (with the screen and sound off)

for 5 minutes or more.

The system will resume normal operation

when the temperature in the passenger

compartment has dropped.

Short press: confirm a selection; if nothing

selected, access to presets.

220

11

DS CONNECT NAV

Applications

Telephone

Vehicle

Run certain applications on a smartphone

Connect a telephone via Bluetooth^®, read

messages and emails and send quick

messages.

Activate, deactivate or configure certain

vehicle functions.

connected via CarPlay^®, MirrorLink^TM

(available in some countries) or Android Auto.

Check the status of Bluetooth^®and Wi-Fi

connections.

Air conditioning

Settings

Radio Media

18,5

21,5

87.5 MHz

Manage various temperature and air flow

settings.

Configure a personal profile and/or

configure the sound (balance, ambience,

etc.) and the display (language, units, date, time,

etc.).

Select an audio source or radio station, or

display photographs.

221

11

DS CONNECT NAV

Example of a "voice command" for the radio and

media:

Voice commands

"Play artist Madonna"

Example of a "voice command" for the telephone:

"Call David Miller"

Steering wheel-mounted

controls

Voice commands:

The voice commands, with a choice of 17

languages (Arabic, Brazilian, Czech,

Danish, Dutch, English, Farsi, French, German,

Italian, Norwegian, Polish, Portuguese,

Russian, Spanish, Swedish, Turkish), are made

using the language previously chosen and set

in the system.

Voice commands can be issued from any

screen page after a short press on the "Voice

commands" button located on the steering

wheel or at the end of the lighting control stalk

(depending on equipment), as long as there is no

telephone call in progress.

A number of commands are available when a

menu is selected.

For some voice commands, there are

alternative synonyms.

Example: Guide to / Navigate to / Go to / ...

The voice commands in Arabic for: "Navigate

to address" and "Display POI in the city", are

not available.

To ensure that voice commands are

always recognised by the system, please

follow these recommendations:

–

use natural language in a normal tone

without breaking up words or raising your

voice.

– always wait for the "beep" (audible signal)

before speaking.

Information - Using the system

– for best results, closing the windows and

sunroof is recommended, to avoid extraneous

interference (depending on version).

– before issuing a voice command, ask any

other passengers to refrain from speaking.

When voice commands are activated, by

briefly pressing the button, help is

Press the Push To Talk button and tell me

what you'd like after the tone. Remember

you can interrupt me at any time by pressing this

button. If you press it again while I'm waiting for

you to speak, it'll end the conversation. If you

need to start over, say "cancel". If you want to

undo something, say "undo". And to get

information and tips at any time, just say "help". If

you ask to me do something and there's some

information missing that I need, I'll give you some

examples or take you through it step by step.

displayed on the touch screen, offering various

menus and enabling voice-based interaction with

the system.

First steps

Example of a "voice command" for

navigation:

"Navigate to address 11 regent street, London"

222

11

DS CONNECT NAV

There's more information available in "novice"

mode. You can set the dialogue mode to "expert"

when you feel comfortable.

For example, "navigate to address 11 Regent

Street, London", "navigate to contact, John

Miller", or "navigate to intersection of Regent

Street, London". You can specify if it's a preferred

address, or a Point of Interest. For example, say

"navigate to preferred address, Tennis club", or

"navigate to POI Heathrow Airport in London".

Or, you can just say, "navigate home". To see

Points of Interest on a map, you can say things

like "show POI hotels in Banbury". For more

information say "help with points of interest" or

"help with route guidance".

To choose a destination, say something like

"navigate to line three" or "select line two". If you

can't find the destination but the street's right,

say for example "select the street in line three".

To move around a displayed list, you can say "next

page" or "previous page". You can undo your last

action and start over by saying "undo", or say

"cancel" to cancel the current action.

Voice commands

Show POI ''hotel'' at the destination

Show nearby POI petrol station

Navigate to POI Heathrow Airport in London

Navigate to POI petrol station along the route

Help messages

Global voice commands

Voice commands

Set dialogue mode as novice - expert

Select user 1 / Select profile John

Increase temperature

To see points of interest on a map, you can say

things like "show hotels in Banbury", "show

nearby parking", "show hotel at the destination"

or "show petrol station along the route". If you

prefer to navigate directly to a point of interest,

you can say "navigate to nearby petrol station". If

you feel you are not being well understood, try to

say the word "POI" in front of the point of interest.

For example say "navigate to POI restaurant at

the destination".

To choose a POI, say something like "select line

2". If you've searched for a Point of Interest

and don't see the one you're after, you can filter

further by saying something like "select POI in line

2", or "select the city in line 3". You can also scroll

through the list by saying "next page" or "previous

page".

Decrease temperature

Help messages

There are lots of topics I can help you with.

You can say: "help with phone", "help with

navigation", "help with media" or "help with

radio". For an overview on how to use voice

controls, you can say "help with voice controls".

Say "yes" if I got that right. Otherwise, say "no"

and we'll start that again.

Voice commands

"Navigation" voice commands

Tell me the remaining distance

Tell me the remaining time

Tell me the arrival time

Stop route guidance

Voice commands

Navigate home

Navigate to work

Navigate to preferred address, Tennis club

Navigate to contact, John Miller

Navigate to address 11 regent street, London

Help messages

Depending on the country, give

destination (address) instructions in the

language configured for the system.

Help messages

You can say "stop" or "resume route guidance".

To get information about your current route, you

can say "tell me the remaining time", "remaining

distance" or "arrival time". To learn more

To plan a route, say "navigate to" followed by the

address, the contact name or an intersection.

commands, try saying "help with navigation".

223

11

DS CONNECT NAV

What's playing?

Help messages

"Radio Media" voice

"Telephone" voice commands

commands

If there is no telephone connected by

Bluetooth, a voice message announces:

"Please first connect a telephone", and the

voice session is closed.

Voice commands

To choose what you'd like to play, start by saying

"play" and then the item. For example, say "play

song Hey Jude", "play line 3" or "select line 2". You

can undo your last action and start over by saying

"undo", or say "cancel" to cancel the current

action.

Turn on source radio - Streaming Bluetooth - …

Help messages

Voice commands

You can select an audio source by saying "turn on

source" followed by the device name. For example,

"turn on source, Streaming Bluetooth", or "turn on

source, radio". Use the command "play" to specify

the type of music you'd like to hear. You can

choose between "song", "artist", or "album". Just

say something like "play artist, Madonna", "play

song, Hey Jude", or "play album, Thriller".

Voice commands

Call David Miller*

Call voicemail*

Display calls*

Voice commands

Play song Hey Jude

Play artist Madonna

Play album Thriller

Help messages

To make a phone call, say "call" followed by the

contact name, for example: "Call David Miller".

You can also include the phone type, for example:

"Call David Miller at home". To make a call by

number, say "dial" followed by the phone number,

for example, "Dial 107776 835 417". You can check

your voicemail by saying "call voicemail". To send

a text, say "send quick message to", followed

by the contact, and then the name of the quick

message you'd like to send. For example, "send

quick message to David Miller, I'll be late". To

display the list of calls, say "display calls". For

more information on SMS, you can say "help with

texting".

I'm not sure what you'd like to play. Please say

"play" and then a song title, an album title, or

an artist name. For example, say "play song Hey

Jude", "play artist Madonna" or "play album

Thriller". To select a line number from the display,

say "select line two". To move around a displayed

list, you can say "next page" or "previous page".

You can undo your last action and start over

by saying "undo", or say "cancel" to cancel the

current action.

Tune to channel BBC Radio 2

Tune to 98.5 FM

Tune to preset number five

Help messages

You can pick a radio station by saying "tune to"

and the station name or frequency. For example

"tune to channel Talksport" or "tune to 98.5 FM".

To listen to a preset radio station, say for example

"tune to preset number five".

Media voice commands are available only

with a USB connection.

To choose a contact, say something like "select

line three". To move around the list say "next

Voice commands

* This function is available only if the telephone connected to the system supports downloading of contacts and recent calls and the corresponding download

has been performed.

224

11

DS CONNECT NAV

page" or "previous page". You can undo your last

action and start over by saying "undo", or say

"cancel" to cancel the current action.

and start over by saying "undo", or say "cancel" to

cancel the current action.

The system only sends pre-recorded

"Quick messages".

Voice commands

"Text message" voice

commands

Send SMS to John Miller, I'm just arriving

Send SMS to David Miller at the office, don't wait

for me

Navigation

Choice of a destination

If there is no telephone connected by

Bluetooth, a voice message announces:

"Please first connect a telephone", and the

voice session is closed.

Help messages

To a new destination

Intuitive method:

Please say "call" or "send quick message to", and

then select a line from the list. To move around

a list shown on the display, you can say "go to

start", "go to end", "next page" or "previous

page". You can undo your last action and start

over by saying "undo", or say "cancel" to cancel

the current action.

Press Navigation to display the main page.

The "Text messages" voice commands

function allows you to dictate and send an

SMS.

Dictate the text, taking care to pause briefly

between each word.

Press "Search…".

Enter an address or key words for your

destination.

Press "OK" to select the "Guidance

Voice commands

When you have finished, the voice recognition

system will automatically generate an SMS.

criteria".

Or

Guided method:

Listen to most recent message*

Help messages

Voice commands

To hear your last message, you can say "listen to

most recent message". When you want to send a

text, there's a set of quick messages ready for you

to use. Just use the quick message name and say

something like "send quick message to Bill Carter,

I'll be late". Check the phone menu for the names

of the supported messages.

Before you can use the navigation feature,

you must enter the "City", the "Street"

(suggestions are displayed automatically

when you begin typing), and the "Number" on

the virtual keypad, or select an address from

the "Contact" list or the address "History".

Send quick message to Bill Carter, I'll be late

Help messages

From the list of quick messages, say the name of

the one you'd like to send. To move around the list

you can say "go to start", "go to end", "next page"

or "previous page". You can undo your last action

* This function is available only if the telephone connected to the system supports downloading of contacts and recent calls and the corresponding download

has been performed.

225

11

DS CONNECT NAV

If you do not confirm the house number,

the navigation system will show one end

Press the "MENU" button to access the secondary

page.

Press the "MENU" button to access the secondary

page.

of the street.

Select "My destinations".

Press the "MENU" button to access the secondary

page.

Select the "Recent” tab.

Select the address chosen in the list to display the

"Guidance criteria”.

Select the "Contact” tab.

Select a contact in the list to start guided

navigation.

Select "Enter address".

Press "OK" to start guided navigation.

Then

To points of interest (POI)

Select the Country

Guided method:

Select "Position" to see the point of

arrival on the map.

Points of interest (POI) are listed in different

categories.

Select the keyboard “language”.

Press Navigation to display the main page.

Change the keyboard "type" according to

the selected "language": ABCDE; AZERTY;

QWERTY or QWERTZ.

Enter the "City", the "Street" and the

"Number", and confirm by pressing on the

displayed suggestions.

To "Home" or "My work"

Press the "MENU" button to access the secondary

Press Navigation to display the main page.

page.

Select "Points of interest".

Press the "MENU" button to access the secondary

page.

Select the "Travel", "leisure",

"Commercial", "Public" or "Geographic”

tab.

Select "My destinations".

Press "OK" to select the "Guidance

criteria".

Select the "Preferred” tab.

Select "Home".

And/or

Or

Select "See on map" to choose the

"Guidance criteria".

Press "OK" to start guided navigation.

Select "Search" to enter the name and

address of a POI.

Press "OK" to calculate the route.

Or

Select "My work".

Or

Zoom in/out using the touch buttons or

with two fingers on the screen.

Or

Intuitive method:

Select a preset favourite destination.

You can only select this method in order to

use the service if a network connection is

active; this may be either a "network

To a contact

To a recent destination

Press Navigation to display the main page.

connection provided by the vehicle", if you use

226

11

DS CONNECT NAV

the DS CONNECT BOX solution, or else a

"network connection provided by the user" via

a smartphone,

In both cases, the system is automatically

connected to the Internet, if network coverage

permits.

Explore the map by sliding a finger on the screen.

Select the destination by pressing on the map.

Tap the screen to place a marker and

display the sub-menu.

Press this button to save the displayed

address.

OR

Press this button to enter the "Latitude"

value using the virtual keypad.

Press this button to start guided

navigation.

And

Or

Press this button to enter the "Longitude"

value using the virtual keypad.

Press Navigation to display the main page.

Press this button to save the displayed

address.

Press the "MENU" button to access the secondary

TMC (Traffic Message

Channel)

A long press on a point opens a list of

nearby POIs.

page.

Select "Search".

Available in some countries.

TMC (Traffic Message Channel) messages

are based on a European standard for traffic

information broadcasting via the RDS system on

FM radio, sending traffic information in real time.

The TMC information is then displayed on a GPS

Navigation system map and taken into account

straight away when routes are calculated, to

avoid accidents, traffic jams and closed roads.

Press on the mode shown in the bottom right of

the screen (On-Board or Connected) to change

"Database".

Select the "Database" in "On-Board" mode

(integrated into the map), or in

"Connected" mode (connected to the Internet).

Press the back arrow to confirm.

To GPS coordinates

Press Navigation to display the main page.

Explore the map by sliding a finger on the screen.

Touch the screen with a finger to go to the next

image.

Press this button to display the world map.

Using the grid, select the desired country

or region by zooming.

Press this button to display or enter the

GPS coordinates.

A marker is displayed in the middle of the

screen, with the "Latitude" and

"Longitude" coordinates.

Enter an address or key words for your

destination (POI).

Press "OK" to start the search.

Danger zone alerts may or may not be

displayed, depending on the applicable

legislation and subscription to the

corresponding service.

Select the "On the route", "Around the

vehicle" or "At destination" tab to refine

your search.

Choose the type of coordinates:

DMS for: Degrees, Minutes, Seconds.

DD for: Degrees, Decimals.

Select the desired address to calculate the route.

To a point on the map

Press this button to start guided

navigation.

Press Navigation to display the main page.

Or

227

11

DS CONNECT NAV

process between the smartphone and the

system functions correctly.

Connected navigation

Select "Wi-Fi network connection".

Connected navigation

connection

USB connection

Select the "Secured", "Not secured" or

"Stored” tab.

Connect the USB cable.

The smartphone charges when

connected by the USB cable.

Bluetooth connection

Depending on version, vehicle trim level and

subscription to online services and options.

Select a network.

Network connection provided by the

vehicle

Using the virtual keypad, enter the Wi-Fi

network "Key” and "Password".

Activate the Bluetooth function on the

telephone and ensure that it is visible to

all (see the "Connect-App" section).

Wi-Fi connection

If you use the DS CONNECT BOX solution,

the system is automatically connected

to the internet and connected services, and does

not require the user to provide a connection via

their smartphone.

Press "OK" to establish a connection

between the smartphone and the

vehicle’s system.

Select a Wi-Fi network detected by the

system and connect to it.

Usage restrictions:

– With CarPlay^®, connection sharing is

only available with a Wi-Fi connection.

– With MirrorLink^TM, connection sharing is only

available with a USB connection.

OR

This function is only available if it has

been activated either via the

"Notifications" or via the "Applications" menu.

Network connection provided by the user

The quality of services depends on the quality

of the network connection.

Press "Notifications".

For the list of suitable smartphones, visit

the Brand's national website.

Select Wi-Fi to activate it.

OR

Authorize sending information

Activate and enter settings for sharing the

smartphone connection.

Press Settings to display the main page.

Press Connect-App to display the main

page.

Press the "OPTIONS" button to access the

secondary page.

Press the "OPTIONS" button to access the

secondary page.

As processes and standards are

constantly changing, we recommend you

update the smartphone operating system as

well as the date and time on the smartphone

and system, to ensure that the communication

Select "System configuration".

228

11

DS CONNECT NAV

These settings must be configured for each

profile.

The services offered with connected

navigation are as follows.

Select the "Private mode” tab.

A Connected Services pack:

– Weather,

OR

Press “OK” to confirm your selection.

– Filling stations,

– Car park,

– Traffic,

– POI local search.

A Danger area pack (optional).

Press "Notifications".

Press "Private mode".

Select the "Alerts” tab.

Activate or deactivate:

THEN

– "Advise of car park nearby".

– "Filling station alert".

Declaration: "Risk areas alert"

Activate or deactivate:

To send information about danger

zones, select the option:Allow

declaration of danger zones

– “Risk areas alert" then press the warning icon

(triangle) to configure alerts.

– "Give an audible warning".

– "Advise proximity of POI 1".

– "Advise proximity of POI 2".

– "No sharing (data, vehicle position)".

– “Only data sharing"

– "Sharing data and vehicle position"

Press Navigation to display the main page.

Settings specific to connected

Press “OK” to confirm your selection.

navigation

Press the "Declare a new danger zone"

button located in the side bars or the

upper bar of the touch screen (depending on

equipment).

Press Navigation to display the main page.

The "Notifications", in the upper bar, can

be accessed at any time.

Press the "MENU" button to access the secondary

page.

Select "Settings".

Select the "Type” option to select the

type of "Danger area".

Danger zone alerts may or may not be

displayed, depending on the applicable

legislation and subscription to the

corresponding service.

Select the "Map” tab.

Select the ""Speed" option and enter it

using the virtual keypad.

Activate or deactivate:

When "TOMTOM TRAFFIC” appears, the

services are available.

Press "OK" to save and send the

information.

– "Allow declaration of danger zones".

– "Guidance to final destination on foot".

229

11

DS CONNECT NAV

Press one of the buttons to search for

"Stations".

Activate/deactivate "Stations".

Displaying fuel information

Applications

USB ports

Press Navigation to display the main page.

Depending on equipment, for more information

on the USB ports compatible with CarPlay^®,

MirrorLink^TMor Android Auto applications, refer to

the "Ease of use and comfort" section.

Press this button to display the list of

services.

Press "POI on map" to display the list of

points of interest.

Press this button to display a secondary

page.

Select the "Settings” tab.

Press one of the buttons to search for

"Stations".

Activate/deactivate "Stations".

For the list of suitable smartphones, visit

the Brand's national website.

Select the desired connector type.

Press "OK" to save.

Synchronising a smartphone enables

users to display applications that support

the smartphone’s MirrorLinkCarPlay^®, ^TMor

Android Auto technology on the vehicle’s

screen. For CarPlay^®technology, the CarPlay^®

function must first be activated on the

smartphone.

In all cases, the smartphone must be unlocked,

to enable the communication process between

the smartphone and the system to function.

As principles and standards are constantly

changing, we recommend keeping the

smartphone's operating system up-to-date,

together with the date and time on the

smartphone and the system.

Press this button to display a secondary

page.

Displaying weather

information

Select the "Settings” tab.

Select the desired fuel.

Press "OK" to save.

Press Navigation to display the main page.

Press this button to display the list of

services.

Select "View map".

Select "Weather".

Displaying charging station

Press this button to display basic

information.

Press this button to display detailed

weather information.

details

Press Navigation to display the main page.

Connectivity

The temperature displayed at 6 a.m. will

be the maximum temperature for the

day.

The temperature displayed at 6 p.m. will be the

minimum temperature for the night.

Press this button to display the list of

services.

Press "POI on map" to display the list of

points of interest.

Press Applications to display the main

page.

Press "Connectivity" to access the CarPlay^®,

MirrorLink^TMor Android Auto functions.

230

11

DS CONNECT NAV

CarPlay^®smartphone

connection

MirrorLink^TMsmartphone

connection

The "MirrorLink^TM" function requires a

compatible smartphone and compatible

applications.

Access to the menus for the system is possible at

any time using the dedicated buttons.

There may be a pause before applications

become available, depending on the

quality of the network.

Connect a USB cable. The smartphone

charges when connected by a USB cable.

Press "Telephone" to display the CarPlay^®

interface.

You can check that your telephone is

compatible on the Brand's website (services).

Or

Android Auto smartphone

connection

Connect a USB cable. The smartphone

charges when connected by a USB cable.

From the system, press "Applications" to

display the main page.

When connecting a smartphone to the

system, we recommend enabling

Bluetooth^®on the smartphone.

Install the "Android Auto" application on

the smartphone via "Google Play".

The "Android Auto" function requires the use

of a compatible smartphone and applications.

Press "Connectivity" to access the "CarPlay^®”

function.

Connect a USB cable. The smartphone

charges when connected by a USB cable.

From the system, press "Applications" to

display the main page.

Press "CarPlay" to display the CarPlay^®

interface.

Connect a USB cable. The smartphone

charges when connected by a USB cable.

From the system, press "Applications" to

display the main page.

Press "Connectivity" to access the "MirrorLink^TM

function.

”

On connecting the USB cable, the CarPlay^®

function deactivates the system's

Bluetooth^®mode.

Press "MirrorLink^TM" to start the

application in the system.

Press "Connectivity" to access the "Android Auto”

function.

Depending on the smartphone, it may be

When the USB cable is disconnected and

the ignition is switched off then back on,

the system will not automatically switch to

Radio Media mode; the source must be

changed manually.

necessary to activate the "MirrorLink^TM" function.

During the procedure, several screen

Press "Android Auto" to start the

application in the system.

During the procedure, several screen

pages relating to certain features are

displayed.

Accept to start and complete the connection.

Access to the different audio sources remains

available in the margin of the Android Auto

display, using the touch buttons located in the

upper bar.

pages relating to certain features are

displayed.

Accept to start and complete the connection.

Once the connection is established, a page is

displayed, showing the applications already

downloaded to the smartphone that are

compatible with MirrorLink^TMtechnology.

Access to the different audio sources remains

available in the margin of the MirrorLink^TMdisplay,

using the touch buttons located in the upper bar.

Access to the menus for the system is possible at

any time using the dedicated buttons.

231

11

DS CONNECT NAV

Bluetooth connection^®

In Android Auto mode, the function that

displays rolling menus by briefly pressing

the screen with three fingers is disabled.

Press the "OPTIONS" button to access the

secondary page.

Press "Bluetooth connection".

The services available depend on the

network, the SIM card and the

compatibility of the Bluetooth devices used.

Consult the smartphone user guide and the

service provider to check which services are

available.

Select "Search".

The list of detected smartphones is

displayed.

There may be a pause before applications

become available, depending on the

quality of the network.

Select the name of the chosen smartphone

in the list.

Car Apps

The Bluetooth function must be activated

and the smartphone configured as

"Visible to all".

Depending on the type of smartphone, you

may by prompted to accept the transfer of

contacts and messages.

Press Applications to display the main

page.

Press "Car Apps" to display the applications home

To complete the pairing, whichever procedure is

used (from the smartphone or from the system),

ensure that the code is the same in the system

and in the smartphone.

page.

Connection sharing

The system offers to connect the smartphone

with 3 profiles:

– "Telephone" (hands-free kit, telephone only),

– “Streaming" (streaming: wireless playing of

audio files on the smartphone),

Internet Browser

Press Applications to display the main

page.

If the pairing procedure fails, we

recommend deactivating and then

reactivating the Bluetooth function on the

smartphone.

Press "Connectivity" to access the "Connected

Apps” function.

Press "Connected Apps" to display the browser

home page.

– "Mobile internet data".

The "Mobile internet data" profile must be

activated for connected navigation (if the

vehicle does not have "Emergency and

assistance call" services), after first activating

smartphone connection sharing.

Select the country of residence.

Procedure from the smartphone

Select the name of the system in the list of

detected devices.

In the system, accept the connection request

from the smartphone.

Press "OK" to save and start the browser.

Connection to the internet is via one of

the network connections provided by the

vehicle or the user.

Select one or more profiles.

Procedure from the system

Press "OK" to confirm.

Press Connect-App to display the main

page.

232

11

DS CONNECT NAV

Select the "Settings" tab to change the system’s

network name and password.

Or

Wi-Fi connection

Press Radio Media to display the main

page.

Network connection via the smartphone's Wi-Fi.

Press Connect-App to display the main

page.

Press "OK" to confirm.

Press the "OPTIONS" button to access the

secondary page.

Press the "OPTIONS" button to access the

secondary page.

To protect against unauthorised access

and to make all systems as secure as

possible, the use of a security code or a

complex password is recommended.

Select "Radio stations" on the secondary

page.

Select "Wi-Fi network connection".

Press "Frequency".

Enter the values using the virtual keypad.

First enter the units then click on the

decimals field to enter the figures after the

decimal point.

Select the "Secured", "Not secured" or

"Stored” tab.

Select a network.

Managing connections

Press Connect-App to display the main

page.

Press "OK" to confirm.

Using the virtual keypad , enter the Wi-Fi

network "Key" and "Password".

Press "OK" to establish the connection.

Press the "OPTIONS" button to access the

secondary page.

Radio reception may be affected by the

use of electrical equipment not approved

by the Brand, such as a USB charger connected

to the 12 V socket.

The exterior environment (hills, buildings,

tunnels, basement car parks, etc.) may

block reception, including in RDS mode. This

phenomenon is perfectly normal in the context

of radio wave transmission, and in no way

indicative of an audio system malfunction.

Select "Manage connection".

The Wi-Fi connection and Wi-Fi

connection sharing are exclusive.

With this function, you can view the access to

connected services, the availability of connected

services and modify the connection mode.

Wi-Fi connection sharing

Depending on equipment.

Creation of a local Wi-Fi network by the system.

Press Connect-App to display the main

page.

Press the "OPTIONS" button to access the

secondary page.

Radio

Selecting a station

Press Radio Media to display the main

page.

Presetting a station

Select a radio station or frequency.

(refer to the corresponding section)

Press "Presets".

Press "Frequency".

Select "Share Wi-Fi connection".

Press one of the buttons to perform an

automatic search for radio stations.

Or

Select the "Activation" tab to activate or

deactivate Wi-Fi connection sharing.

And/or

Make a long press on one of the buttons to

preset the station.

Move the slider to manually search for

frequencies up or down.

233

11

DS CONNECT NAV

Press Radio Media to display the main

page.

Press the "OPTIONS" button to access the

secondary page.

Changing the waveband

DAB (Digital Audio

Press Radio Media to display the main

page.

Broadcasting) radio

To change the waveband, press "Band…",

displayed at the bottom right of the screen.

Select "Radio settings".

Terrestrial Digital Radio

Digital radio provides higher quality sound.

The various "multiplexes/ensembles" offer a

choice of radio stations organised in alphabetical

order.

Press Radio Media to display the main

page.

Press “Band …” at the top centre of the screen to

display the "DAB" waveband.

Select "General".

Activating/Deactivating RDS

Activate/deactivate "Display radio text".

RDS, if activated, allows you to continue listening

to the same station by automatic retuning to

alternative frequencies.

Press "OK" to confirm.

Press Radio Media to display the main

page.

Press the "OPTIONS" button to access the

secondary page.

Playing TA messages

The TA (Traffic Announcement) function gives

priority to TA alert messages. To operate, this

function needs good reception of a radio station

that carries this type of message. While traffic

information is being broadcast, the current

media is automatically interrupted so that the

TA message can be heard. Normal play of the

previously playing media resumes at the end of

the message.

FM-DAB tracking

Select "Radio settings".

“DAB" does not cover 100 % of the territory.

When the digital radio signal is poor, “FM-DAB

auto follow-up" enables you to continue listening

to the same station by automatically switching to

the corresponding FM analogue station (if there

is one).

Select "General".

Activate/deactivate "Station follow".

Press "OK" to confirm.

Press Radio Media to display the main

page.

Press the "OPTIONS" button to access the

secondary page.

RDS station tracking may not be available

nationwide, as many radio stations do not

cover 100 % of the country. This explains the

loss of reception of the station during a

journey.

Select "Announcements".

Activate/deactivate "Traffic

announcement".

Press "OK" to confirm.

Select "Radio settings".

Select "General".

Activate/deactivate "FM-DAB Follow-up".

Displaying text information

The "Radio Text" function displays information

transmitted by the radio station relating to the

station or the currently playing song.

Activate/deactivate "Station follow".

234

11

DS CONNECT NAV

Press "OK".

Reduce the number of non-music files and the

number of folders to reduce the waiting time.

Playlists are updated whenever the ignition is

switched off or a USB memory stick is connected.

The audio system memorises these lists, which

will subsequently load faster if they have not been

changed.

Press Radio Media to display the main

page.

Select "SOURCES".

If “FM-DAB auto tracking" is activated,

Select Video to start the video.

there may be a time offset of a few

seconds when the system switches to "FM"

analogue radio, and in some cases a change in

volume.

When the digital signal quality is restored, the

system automatically changes back to "DAB".

To remove the USB memory stick, press the

pause button to stop the video, then

remove the memory stick.

The system can play video files in the MPEG-4 Part

2, MPEG-2, MPEG-1, H.264, H.263, VP8, WMV and

RealVideo formats.

Auxiliary socket (AUX)

Depending on equipment

Connect a portable device (MP3 player,

etc.) to the auxiliary jack socket using an

audio cable (not supplied).

This source is only available if "Auxiliary input"

has been selected in the audio settings.

First adjust the volume on the portable device (to

a high level). Then adjust the volume of the audio

system.

If the "DAB" station being listened to is

not available on “FM” (“FM-DAB" option

shaded), or "FM-DAB auto tracking" is not

activated, the sound will cut out while the

digital signal is too weak.

Streaming Bluetooth^®

Streaming allows you to listen to the audio feed

from your smartphone.

The Bluetooth profile must be activated.

First adjust the volume on the portable device (to

a high level).

Media

Controls are managed via the portable device.

Then adjust the volume of the audio system.

If play does not start automatically, it may be

necessary to start the audio playback from the

smartphone.

Control is from the portable device or by using the

system's touch buttons.

Selecting the source

USB port

Insert the USB memory stick into the USB

port or connect the USB device to the USB

port using a suitable cable (not supplied).

Press Radio Media to display the main

page.

Select "SOURCES".

Select the source.

Once connected in streaming mode, the

smartphone is considered to be a media

source.

To protect the system, do not use a USB

hub.

Watching a video

Depending on equipment/Depending on version/

Depending on country.

The system builds playlists (in temporary

memory); this operation can take from a

few seconds to several minutes at the first

connection.

Connecting Apple^®players

Insert a USB memory stick in the USB port.

Connect the Apple^®player to the USB port using a

suitable cable (not supplied).

Video control commands are accessible

only through the touch screen.

235

11

DS CONNECT NAV

Play starts automatically.

Control is via the audio system.

All ".wma" files must be standard WMA 9 files.

The supported sampling rates are 32, 44 and 48

KHz.

To avoid reading and display problems, we

recommend choosing file names less than 20

characters long that do not contain any special

characters (e.g. “ ? . ; ù).

If the pairing procedure fails, we

recommend deactivating and then

reactivating the Bluetooth function on the

telephone.

The classifications available are those of

the portable device connected (artists/

albums/genres/playlists/audio books/

podcasts).

The default classification used is by artist. To

modify the classification used, return to the

first level of the menu then select the desired

classification (playlists for example) and

confirm to go down through the menu to the

desired track.

Procedure from the telephone

Select the system name in the list of

detected devices.

In the system, accept the connection request

from the telephone.

Use only USB memory sticks in FAT32 format (File

Allocation Table).

We recommend using the original USB

cable for the portable device.

Procedure from the system

Press Telephone to display the main page.

The version of software in the audio system may

not be compatible with the generation of the

Apple^®player.

Telephone

Pairing a Bluetooth^®telephone

Press "Bluetooth search".

Or

Information and advice

The services available depend on the

network, the SIM card and the

compatibility of the Bluetooth devices used.

Consult the telephone user guide and the

service provider to check which services are

available.

Select "Search".

The list of detected telephones is

displayed.

The system supports USB mass storage devices,

BlackBerry^®devices and Apple^®players via the

USB ports. The adapter cable is not supplied.

Devices are managed using the audio system

controls.

Select the name of the chosen telephone

in the list.

Other devices, not recognised on connection,

must be connected to the auxiliary socket using

a jack cable (not supplied) or via Bluetooth

streaming, if compatible.

The audio system will only play audio files with

".wma", ".aac", ".flac", ".ogg" and ".mp3" file

extensions, at bit rates between 32 Kbps and 320

Kbps.

Connection sharing

The system offers to connect the telephone with

3 profiles:

– "Telephone" (hands-free kit, telephone only),

– “Streaming" (streaming: wireless playing of

audio files on the telephone),

The Bluetooth function must be activated

and the telephone configured as "Visible

to all” (in the telphone settings).

To complete the pairing, whichever procedure is

used (from the telephone or from the system),

ensure that the code is the same in the system

and in the telephone.

– "Mobile internet data".

The "Mobile internet data" profile must be

activated for connected navigation, after

It also supports VBR (Variable Bit Rate) mode.

No other file types (".mp4", etc.) can be read.

236

11

DS CONNECT NAV

first activating smartphone connection

sharing.

Select "Bluetooth connection" to display

the list of paired devices.

Make a short press on the steering

mounted telephone button to accept an

Press the "Details" button.

incoming call.

And

Select one or more profiles.

Make a long press

Press "OK" to confirm.

on the steering mounted telephone button

to reject the call.

Depending on the type of telephone, you may by

prompted to accept the transfer of contacts and

messages.

Or

Managing paired telephones

Select "End call" on the touch screen.

This function lets you connect or disconnect a

device or delete a pairing.

The ability of the system to connect just

one profile depends on the telephone.

All three profiles may connect by default.

Making a call

Press Telephone to display the main page.

Using the telephone is not recommended

while driving.

Park the vehicle.

Make the call using the steering mounted

controls.

Press the "OPTIONS" button to access the

secondary page.

The profiles compatible with the system

are: HFP, OPP, PBAP, A2DP, AVRCP, MAP

and PAN.

Select "Bluetooth connection" to display

the list of paired devices.

Press on the name of the telephone

selected in the list to disconnect it.

Press again to connect it.

Visit the Brand's website for more information

(compatibility, additional help, etc.).

Calling a new number

Automatic reconnection

Press Telephone to display the main page.

Deleting a telephone

On returning to the vehicle, if the last telephone

connected is present again, it is automatically

recognised and within about 30 seconds

after switching on the ignition, the pairing is

established automatically (Bluetooth activated).

To modify the connection profile:

Select the basket at top right of the screen

to display a basket alongside the

telephone chosen.

Enter the phone number using the digital

keypad.

Press "Call" to start the call.

Press the basket alongside the telephone

chosen to delete it.

Press Telephone to display the main page.

Calling a contact

Receiving a call

An incoming call is announced by a ring and a

superimposed display in the screen.

Press Telephone to display the main page.

Press the "OPTIONS" button to access the

secondary page.

237

11

DS CONNECT NAV

Or press and hold

Press the "Address" tab to enter the

contact’s address(es).

Access to "Messages" depends on the

compatibility between the smartphone

and the onboard system.

Some smartphones retrieve messages or email

messages more slowly than others.

the steering mounted telephone button.

Press the "Email" tab to enter the

contact’s email address(es).

Press "OK" to save.

Select "Contact".

Select the desired contact from the displayed list.

Select "Call".

Press this button to sort contacts by

Surname+first name or by First

name+surname.

Managing quick messages

Press Telephone to display the main page.

Calling a recently used number

The "Email" function allows email

addresses to be entered for a contact, but

the system is not able to send emails.

Press the "OPTIONS" button to access the

secondary page.

Press Telephone to display the main page.

Select "Quick messages" to display the list

of messages.

Select the "Delayed", "My arrival", "Not

available" or "Other" tab, enabling you to

create new messages.

Or

Press and hold

Managing messages

the steering mounted telephone button.

Press Telephone to display the main page.

Press "Create" to write a new message.

Select "Calls".

Select the desired contact from the displayed list.

Press the "OPTIONS" button to access the

secondary page.

Select the message chosen in one of the

lists.

Press "Transfer" to select one or more

recipients.

Select "Messages" to display the list of

messages.

Select the "All", "Incoming" or "Sent” tab.

It is always possible to make a call

directly from the telephone; as a safety

measure, first park the vehicle.

Press " Play" to start playing the message.

Select the details of the message chosen

in one of the lists.

Managing contacts/entries

Press "Answer" to send a quick message

stored in the system.

Press Telephone to display the main page.

Managing email

Press Telephone to display the main page.

Press "Call" to start the call.

Select "Contact".

Select "Create" to add a new contact.

Press the "OPTIONS" button to access the

secondary page.

Press " Play" to listen to the message.

Press the "Telephone" tab to enter the

contact’s telephone number(s).

Select "Email" to display the list of

messages.

238

11

DS CONNECT NAV

Select the "Incoming", "Sent" or "Not

The Ambience setting (choice of 6

ambiences) and the Bass, Medium and

Treble sound settings are different and

independent for each audio source.

Select the photograph.

Press "OK" to accept the transfer of the

read” tab.

Select the message chosen in one of the lists.

Press " Play" to start playing the message.

photograph.

Press "OK" again to save the settings.

Activate or deactivate "Loudness".

The "Position” settings (All passengers, Driver

and Front only) are common to all sources.

Activate or deactivate "Touch tones", "Volume

linked to speed" and "Auxiliary input".

Access to email messages depends on the

compatibility between the smartphone

and the onboard system.

The location for the photograph is square;

the system reshapes the original

photograph if in another format.

Press this button to reset the selected

profile.

optimises the sound distribution inside

the passenger compartment.

Settings

Resetting the selected profile activates

the English language by default.

Audio settings

Press Settings to display the main page.

Select a "Profile" (1 or 2 or 3) to link "Audio

settings" with it.

Configuring profiles

Press Settings to display the main page.

Select "Audio settings".

Press the "OPTIONS" button to access the

secondary page.

Then select "Ambience", "Position"; "Sound",

"Voice" or "Ringtone".

Then select "Ambience", "Position"; "Sound",

"Voice" or "Ringtone".

Select "Setting of the profiles".

Press "OK" to save the settings.

Press "OK" to save the selected profile’s

settings.

Select "Profile 1", "Profile 2", "Profile 3” or

"Common profile".

The balance/distribution (or spatialisation

processing to adjust the sound quality

according to the number of passengers in the

vehicle.

Modifying system settings

Press this button to enter a name for the

profile using the virtual keypad.

Press "OK" to confirm.

Press Settings to display the main page.

Press the "OPTIONS" button to access the

secondary page.

Available only with the front and rear speaker

configuration.

Press this button to add a photograph to

the profile.

Select "Screen configuration".

Insert a USB memory stick containing the

photograph in the USB port.

Select "Animation".

239

11

DS CONNECT NAV

Activate or deactivate:Automatic scrolling

Select "Brightness".

Select the display format for the time

Setting the date

(12h/24h).

Activate or deactivate summer time (+1

Press Settings to display the main page.

Move the slider to adjust the brightness of

the screen and/or the instrument panel.

Press Settings to display the main page.

hour).

Press the "OPTIONS" button to access the

secondary page.

Activate or deactivate GPS synchronisation

(UTC).

Press "OK" to confirm.

Select "Setting the time-date".

Press the "OPTIONS" button to access the

secondary page.

Select "Date".

Press this button to set the date.

The system may not automatically

manage the change between winter and

summer time (depending on the country of

sale).

Select "System settings".

Press "OK" to confirm.

Select "Units" to change the units of distance,

fuel consumption and temperature.

Select "Factory settings" to restore the initial

settings.

Select the display format for the date.

Colour schemes

Depending on equipment/Depending on version.

Time and date setting is only available if

"GPS synchronisation" is deactivated.

Resetting the system to "Factory

settings" activates English and degrees

Fahrenheit and deactivates summer time.

As a safety measure, the procedure for

changing the colour scheme is only

possible when the vehicle is stationary.

Setting the time

Select "System info" to display the versions of the

various modules installed in the system.

Press Settings to display the main page.

Select "Color schemes".

Press the "OPTIONS" button to access the

secondary page.

Selecting the language

Press Settings to display the main page.

Select "Setting the time-date".

Select a colour scheme in the list then

Press the "OPTIONS" button to access the

secondary page.

press "OK" to confirm.

Select "Time".

Press this button to set the time using the

virtual keypad.

Press "OK" to confirm.

Whenever the colour scheme is changed,

the system restarts, temporarily

displaying a black screen.

Select "Languages" to change the

language.

Press this button to set the time zone.

240

11

DS CONNECT NAV

The "Danger zone" audible warning feature is not

working.

The audible warning is not active or the volume is

too low.

►ꢀ Activate the audible warning in the

"Navigation" menu and check the voice volume in

the sound settings.

The system does not suggest a detour around an

incident on the route.

The route settings do not take account of TMC

messages.

►ꢀ Configure the "Traffic info " function in

the route settings list (Without, Manual or

Automatic).

In certain countries, only major routes

(motorways, etc.) are listed for the traffic

information.

This is perfectly normal. The system is dependent

on the traffic information available.

The altitude is not displayed.

On starting, GPS initialisation may take up to

3 minutes to receive more than 4 satellites

correctly.

►ꢀ Wait until the system has started up

completely so that there is GPS coverage by at

least 4 satellites.

Depending on the geographical environment

(tunnel, etc.) or the weather, the conditions of

reception of the GPS signal may vary.

This behaviour is normal. The system is dependent

on the GPS signal reception conditions.

My navigation is no longer connected.

During start-up and in certain geographical areas,

the connection may be unavailable.

►ꢀ Check that the online services are activated

(settings, contract).

Frequently asked

questions

The following information groups together the

answers to the most frequently asked questions

concerning the system.

Navigation

I cannot enter the navigation address.

The address is not recognised.

►ꢀ Use the "intuitive method" by pressing

the "Search…" button at the bottom of the

"Navigation” page.

The route calculation is not successful.

The route settings may conflict with the current

location (for example, if toll roads are excluded

but the vehicle is on a toll road).

►ꢀ Check the route settings in the "Navigation"

menu.

I do not receive "Danger zone” alerts.

You have not subscribed to the online services

option.

►ꢀ If you have subscribed to the option:

- a few days may elapse before the service is

activated,

- services may not be selected in the system

menu,

- online services are not active ("TOMTOM

TRAFFIC" not shown on the map).

The POIs do not appear.

The POIs have not been selected.

►ꢀ Set the zoom level to 600 ft (200 m) or select

POIs in the POI list.

I receive a warning about a "Danger area" that is

not on my route.

As well as providing guided navigation, the

system announces all "Danger areas" positioned

in a cone located in front of the vehicle. It may

provide an alert for "Danger areas" located on

nearby or parallel roads.

►ꢀ Zoom the map to show the exact location

of the "Danger area". You can select "On the

route" to stop receiving warnings or decrease the

warning duration.

Radio

The reception quality of the tuned radio station

gradually deteriorates or the station presets are

not working (no sound, 87.5 MHz is displayed,

etc.).

Certain traffic jams along the route are not

indicated in real time.

On starting, a few minutes may elapse before the

system begins to receive traffic information.

►ꢀ Wait until traffic information is being received

correctly (traffic information icons shown on the

map).

The vehicle is too far from the selected station’s

transmitter, or no transmitter is present in the

geographical area.

►ꢀ Activate the "RDS" function by means of the

short-cut menu to enable the system to check

241

11

DS CONNECT NAV

whether there is a more powerful transmitter in

the geographical area.

The aerial is missing or has been damaged

(for example while entering a car wash or

underground car park).

►ꢀ Have the aerial checked by a dealer.

The environment (hills, buildings, tunnels,

basement car parks, etc.) is blocking reception,

including in RDS mode.

This is a perfectly normal phenomenon, and is not

indicative of an audio system malfunction.

I cannot find some radio stations in the list of

stations received.

The name of the radio station changes.

The station is no longer received or its name has

changed in the list.

Some radio stations send other information in

place of their name (the title of the song for

example).

The system interprets these details as the station

name.

►ꢀ Press the "Update list" button in the "Radio

stations” secondary menu.

►ꢀ Delete the files supplied with the memory

stick and limit the number of sub-folders in the

file structure on the memory stick.

There may be an extended pause after inserting a

USB stick.

The system reads a variety of data (folder, title,

artist, etc.). This can take from a few seconds to

a few minutes.

►ꢀ Deactivate then reactivate the telphone’s

Bluetooth function.

The Bluetooth telephone is not compatible with

the system.

►ꢀ You can check that your telephone is

compatible on the Brand's website (services).

The volume of the telephone connected in

Bluetooth mode is inaudible.

The volume depends on both the system and the

telephone.

►ꢀ Increase the volume of the audio system, to

maximum if required, and increase the volume of

the telephone if necessary.

Ambient noise affects the quality of the telephone

call.

►ꢀ Reduce the ambient noise level (close

windows, reduce ventilation, slow down, etc.).

Some contacts are duplicated in the list.

The options for synchronising contacts are:

synchronise the contacts on the SIM card, the

contacts on the telephone, or both. When both

synchronisations are selected, some contacts

may be duplicated.

This is perfectly normal.

Some characters in information about the

currently playing media may not be displayed

correctly.

The audio system is unable to process certain

types of character.

►ꢀ Use standard characters to name tracks and

folders.

Playback of streaming files does not start.

The connected device does not automatically

launch playback.

►ꢀ Start playback from the device.

Track names and playing times are not displayed

on the audio streaming screen.

The Bluetooth profile does not allow the transfer

of this information.

►ꢀ Select "Display SIM card contacts" or "Display

telephone contacts".

The contacts are not listed in alphabetical order.

Some telephones offer display options. Depending

on the settings chosen, contacts can be

transferred in a specific order.

Media

Telephone

Playback of my USB memory stick starts only

after a very long wait (around 2 to 3 minutes).

Some files supplied with the memory stick may

greatly slow down access to reading the memory

stick (multiplication by 10 of the cataloguing

time).

I cannot connect my Bluetooth telephone.

The telephone's Bluetooth function may be

switched off or the telephone may not be visible.

►ꢀ Check that the telephone has Bluetooth

switched on.

►ꢀ Modify the telephone directory display

settings.

The system does not receive SMS.

►ꢀ Check in the telephone settings that it is

"visible to all".

242

11

DS CONNECT NAV

SMS text messages cannot be sent to the system

in Bluetooth mode.

►ꢀ In all cases, after applying sound settings,

adjust the volume level on the portable device (to

a high level) first. Then adjust the volume level on

the audio system.

When the engine is off, the system switches off

after several minutes of use.

Settings

When the treble and bass settings are changed,

the ambience is deselected.

When the engine is switched off, the system's

operating time depends on the state of charge of

the battery.

The switch-off is normal: the system

automatically goes into energy economy mode

and switches off to maintain an adequate charge

in the battery.

►ꢀ Start the vehicle’s engine to increase the

charge of the battery.

The date and time cannot be set.

When the ambience is changed, the treble and

bass settings are reset.

Selecting an ambience imposes the treble and

bass settings, and vice versa.

►ꢀ Modify the treble and bass or ambience

settings to obtain the desired musical ambience.

When the balance settings are changed, the

distribution is deselected.

When the distribution setting is changed, the

balance settings are deselected.

Setting of the date and time is only available if the

synchronisation with the satellites is deactivated.

►ꢀ Settings menu / Options / Time-Date setting.

Select the "Time" tab and deactivate the "GPS

synchronisation" (UTC).

Selecting a distribution setting imposes the

balance settings, and vice versa.

►ꢀ Modify the balance setting or the distribution

setting to obtain the desired sound quality.

There is a difference in sound quality between

audio sources.

To allow for optimal listening quality, the sound

settings can be tailored to different audio

sources, which can generate audible differences

when changing source.

►ꢀ Check that the sound settings are appropriate

to the sources listened to. We recommend setting

the sound functions (Bass:, Treble:, Balance) to

the middle position, setting the musical ambience

to "None", setting loudness correction to "Active"

in USB mode and "Inactive" in Radio mode.

DS CONNECT NAV for Your DS 7 Crossback 4 Door First Generation (2017-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals