DS CONNECT RADIO for Your DS 7 Crossback 4 Door First Generation (2017-2022)

205  
10  
DS CONNECT RADIO  
– Changing the system settings and  
configuration.  
either by tapping the tab for the desired page, or  
by using a finger, sliding the pages to the left or  
to the right.  
DS CONNECT RADIO  
Press in the grey zone to go back up a level or to  
confirm.  
Press the back arrow to go back a level or confirm.  
The system is protected in such a way  
that it will only operate in the vehicle.  
The Energy Economy Mode message is  
displayed when the system is about to enter  
the corresponding mode.  
The touch screen is of the "capacitive"  
type.  
To clean the screen, use a soft, non-abrasive  
cloth (e.g. spectacles cloth) with no additional  
product.  
Do not use sharp objects on the screen.  
Do not touch the screen with wet hands.  
The system’s Open Source Software (OSS)  
source codes are available at the  
following addresses:  
Multimedia audio system  
- Applications - Bluetooth®  
telephone  
Certain information is displayed permanently in  
the upper bar of the touch screen:  
– Air conditioning status information  
(depending on version), and direct access to the  
corresponding menu.  
– Radio Media and Telephone menu status  
information.  
– Privacy status information.  
– Access to the touch screen and digital  
instrument panel settings.  
Audio source selection (depending on equipment):  
– FM/DAB/AM radio stations (depending on  
equipment).  
– Telephone connected via Bluetooth and  
Bluetooth multimedia broadcast (streaming).  
– USB Memory stick.  
– Media player connected via the auxiliary socket  
(depending on equipment).  
First steps  
The functions and settings described vary  
according to the vehicle version and  
configuration.  
With the engine running, a press mutes the  
sound.  
With the ignition off, a press turns the system on.  
Increase or decrease the volume using the wheel  
or the "plus" or "minus" buttons (depending on  
the equipment).  
Use the buttons on either side of or below the  
touch screen for access to the menus, then press  
the virtual buttons in the touch screen.  
At all times it is possible to display the rolling  
menus by pressing the screen briefly with three  
fingers.  
For safety reasons and because they  
require sustained attention by the driver,  
the following operations must be carried out  
with the vehicle stationary and the ignition on:  
– Pairing the smartphone with the system in  
Bluetooth mode.  
– Using the smartphone.  
– Connection to the CarPlay®, MirrorLinkTM  
or Android Auto applications (certain  
applications interrupt their display while the  
vehicle is moving).  
All of the touch areas of the screen are white.  
For pages with multiple tabs at the bottom of the  
screen, it is possible to switch between pages  
206  
10  
DS CONNECT RADIO  
This control is located on the steering wheel or at  
the end of the lighting control stalk (depending on  
equipment).  
Radio:  
Select the previous/next preset radio  
station.  
Short press, smartphone voice commands via the  
system.  
Select the previous/next item in a menu or a list.  
Media:  
Increase volume.  
Select the previous/next track.  
Select the previous/next item in a menu or a list.  
Radio:  
Short press: display the list of radio  
stations.  
Decrease volume.  
Mute by pressing the volume increase and  
decrease buttons simultaneously (depending on  
equipment).  
In the "Settings" menu, it is possible to  
Long press: update the list.  
Media:  
Restore the sound by pressing one of the two  
volume buttons.  
create a profile for an individual or for a  
group of people with shared interests, and  
configure a wide range of settings (radio  
presets, audio settings, ambiences, etc.).  
Settings are applied automatically.  
Short press: display the list of folders.  
Long press: display the available sorting options.  
Change audio source (radio; USB; AUX if  
equipment connected; CD; streaming).  
Confirm a selection.  
Media (short press): change the  
multimedia source.  
Telephone (short press): start telephone  
call.  
Call in progress (short press): access telephone  
menu.  
Telephone (long press): reject an incoming call,  
end call; when no call is in progress, access  
telephone menu.  
Radio (rotate): automatic search for the  
previous/next station.  
Media (rotate): previous/next track, move in a list.  
Short press: confirm a selection; if nothing  
selected, access to presets.  
In very hot conditions, the volume may be  
limited to protect the system. It may enter  
standby mode (with the screen and sound off)  
for 5 minutes or more.  
The system will resume normal operation  
when the temperature in the passenger  
compartment has dropped.  
Increase volume.  
Decrease volume.  
Mute/restore sound by simultaneously  
pressing the increase and decrease  
volume buttons.  
Steering mounted controls  
Steering mounted controls -  
Type 2  
Radio: display the list of stations.  
Media: display the list of tracks.  
Radio (press and hold): update the list of stations  
received.  
Steering mounted controls -  
Type 1  
Voice commands:  
207  
10  
DS CONNECT RADIO  
Telephone  
Driving  
Menus  
Applications  
Connect a mobile phone via Bluetooth®.  
Activate, deactivate or configure certain  
vehicle functions.  
Run certain applications on a smartphone  
connected via MirrorLinkTM, CarPlay® or Android  
Auto.  
Access configurable equipment.  
Navigation  
Settings  
Radio Media  
87.5 MHz  
Configure the navigation and select your  
destination via MirrorLinkTM, CarPlay® or  
Android Auto.  
Configure a personal profile and/or  
configure the sound (balance, ambience,  
etc.) and the display (language, units, date, time,  
etc.).  
Select an audio source or radio station.  
208  
10  
DS CONNECT RADIO  
Press this button to display the details of  
the photo.  
Air conditioning  
Radio  
Press the back arrow to go back a level.  
Selecting a station  
Press Radio Media to display the main  
page.  
Managing messages  
Press one of the buttons to perform an  
automatic search for radio stations.  
Press Applications to display the main  
18,5  
21,5  
page.  
Press "SMS".  
Or  
Move the slider to manually search for  
frequencies up or down.  
Select the "SMS” tab.  
Or  
Press the frequency.  
Manage various temperature and air flow  
settings.  
Press this button to select the display  
settings for messages.  
Enter the FM and AM waveband values  
using the virtual keypad.  
Press "OK" to confirm.  
Press this button to search and select a  
recipient.  
Select the "Quick messages” tab.  
Applications  
Viewing photos  
Press this button to select the display  
settings for messages.  
Press this button to write a new message.  
Radio reception may be affected by the  
use of electrical equipment not approved  
by the Brand, such as a USB charger connected  
to the 12 V socket.  
The exterior environment (hills, buildings,  
tunnels, basement car parks, etc.) may  
block reception, including in RDS mode. This  
phenomenon is perfectly normal in the context  
of radio wave transmission, and in no way  
indicative of an audio system malfunction.  
Insert a USB memory stick in the USB port.  
To protect the system, do not use a USB  
hub.  
Press the bin alongside the selected  
message to delete it.  
Press this button alongside the selected  
message to display the secondary page.  
Press this button to edit and modify the  
existing text.  
The system can read folders and image files in the  
formats: .tiff; .gif; .jpg/jpeg; .bmp and .png.  
Press Applications to display the main  
page.  
Press "Photos".  
Press this button to write a new message.  
Select a folder.  
Changing the waveband  
Press the bin to delete the message.  
Select an image to view.  
Press Radio Media to display the main  
page.  
209  
10  
DS CONNECT RADIO  
Press the "OPTIONS" button to access the  
secondary page.  
cover 100 % of the country. This explains the  
loss of reception of the station during a  
journey.  
Activate/deactivate "TA".  
Press in the shaded area to confirm.  
Press "Band" to change waveband.  
Press in the shaded area to confirm.  
Displaying text information  
Audio settings  
The "Radio Text" function displays information  
transmitted by the radio station relating to the  
station or the currently playing song.  
Press Radio Media to display the main  
page.  
Press Radio Media to display the main  
page.  
Presetting a station  
Select a radio station or frequency.  
Make a short press on the star outline. If  
the star is solid, the radio station is already  
preset.  
Press the "OPTIONS" button to access the  
secondary page.  
Press "Audio settings".  
Press the "OPTIONS" button to access the  
secondary page.  
Or  
Select the "Tone", "Balance", "Sound",  
"Voice" or "Ringtones" tab to configure the  
sound settings.  
Activate/deactivate "News".  
Select a radio station or frequency.  
Press "Preset".  
Press in the shaded area to confirm.  
Make a long press on one of the buttons to  
preset the station.  
Press the back arrow to confirm.  
In the "Tone" tab, the Ambience, Bass,  
Medium and Treble sound settings are  
different and independent for each audio  
source.  
In the "Balance” tab, the All passengers, Driver  
and Front only settings are common to all  
sources.  
In the "Sound” tab, activate or deactivate  
"Volume linked to speed", "Auxiliary input" and  
"Touch tones".  
Playing TA messages  
Activating/Deactivating RDS  
The TA (Traffic Announcement) function gives  
priority to TA alert messages. To operate, this  
function needs good reception of a radio station  
that transmits this type of message. While traffic  
information is being broadcast, the current  
media is automatically interrupted so that the  
TA message can be heard. Normal play of the  
previously playing media resumes at the end of  
the message.  
RDS, if activated, allows you to continue listening  
to the same station by automatically retuning to  
alternative frequencies.  
Press Radio Media to display the main  
page.  
Press the "OPTIONS" button to access the  
secondary page.  
Activate/deactivate "RDS".  
Press Radio Media to display the main  
page.  
Press the "OPTIONS" button to access the  
secondary page.  
Press in the shaded area to confirm.  
The balance/distribution (or spatialisation  
with the Arkamys© system) uses audio  
processing to adjust the sound quality  
RDS station tracking may not be available  
nationwide, as many radio stations do not  
210  
10  
DS CONNECT RADIO  
according to the number of passengers in the  
vehicle.  
the corresponding "FM" analogue station (if there  
is one).  
The system builds playlists (in temporary  
memory); this operation can take from a  
few seconds to several minutes at the first  
connection.  
Press Radio Media to display the main  
page.  
Onboard audio: Arkamys Sound Staging©  
optimises the sound distribution inside  
the passenger compartment.  
Press the "OPTIONS" button to access the  
secondary page.  
Reduce the number of non-music files and the  
number of folders to reduce the waiting time.  
Playlists are updated whenever the ignition is  
switched off or a USB memory stick is connected.  
The audio system memorises these lists, which  
will subsequently load faster if they have not been  
changed.  
Activate/deactivate "FM-DAB Follow-up".  
Press in the shaded area to confirm.  
DAB (Digital Audio  
Broadcasting) radio  
If "FM-DAB Follow-up" is activated, there  
may be a time offset of a few seconds  
when the system switches to "FM" analogue  
radio, and in some cases a change in volume.  
When the digital signal quality is restored, the  
system automatically changes back to "DAB".  
Auxiliary (AUX) jack socket  
Depending on equipment  
Connect a portable device (MP3 player,  
etc.) to the auxiliary jack socket using an  
audio cable (not supplied).  
Terrestrial Digital Radio  
Digital radio provides higher quality sound.  
The various "multiplexes/ensembles" offer a  
choice of radio stations organised in alphabetical  
order.  
This source is only available if "Auxiliary input"  
has been selected in the audio settings.  
First adjust the volume on the portable device (to  
a high level). Then adjust the volume of the audio  
system.  
Press Radio Media to display the main  
page.  
Press the "OPTIONS" button to access the  
secondary page.  
If the "DAB" station being listened to is  
not available on "FM", or if "FM-DAB  
Follow-up" is not activated, the sound will cut  
out while the digital signal is too weak.  
Press "Band" to select "DAB band".  
Controls are managed via the portable device.  
Press in the shaded area to confirm.  
Media  
Selecting the source  
Press Radio Media to display the main  
page.  
USB port  
Insert the USB memory stick into the USB  
port or connect the USB device to the USB  
port using a suitable cable (not supplied).  
FM-DAB Follow-up  
Press the "SOURCES" button.  
Select the source.  
"DAB" does not cover 100 % of the country.  
When the digital radio signal is poor, the "FM-DAB  
Follow-up" enables you to continue listening to  
the same station by automatically switching to  
BluetoothStreaming®  
Streaming allows you to listen to the audio feed  
from your smartphone.  
To protect the system, do not use a USB  
hub.  
211  
10  
DS CONNECT RADIO  
The Bluetooth profile must be activated.  
First adjust the volume on the portable device  
(to a high level). Then adjust the volume of the  
system.  
The version of software in the audio system may  
not be compatible with the generation of the  
Apple® player.  
We recommend using the original USB  
cable for the portable device.  
Information and advice  
If play does not start automatically, it may be  
necessary to start the audio playback from the  
smartphone.  
Control is from the portable device or by using the  
system's touch buttons.  
Telephone  
USB sockets  
The system supports USB mass storage devices,  
BlackBerry® devices or Apple® players via the USB  
ports. The adapter cable is not supplied.  
Devices are managed using the audio system  
controls.  
Depending on equipment, for more information  
on the USB sockets compatible with the CarPlay®,  
MirrorLinkTM or Android Auto applications, refer to  
the "Ease of use and comfort" section.  
Once connected in Streaming mode, the  
smartphone is considered to be a media  
source.  
Other devices, not recognised on connection,  
must be connected to the auxiliary socket using  
a jack cable (not supplied) or via Bluetooth  
streaming, if compatible.  
The synchronisation of a smartphone  
allows users to display applications  
adapted to the CarPlay®, MirrorLinkTM or  
Android Auto technology of the smartphone on  
the vehicle screen. For the CarPlay®  
technology, the CarPlay® function must be  
activated on the smartphone beforehand.  
For the communication process between the  
smartphone and the system to work, it is  
essential in all cases that the smartphone is  
unlocked.  
As the principles and standards are constantly  
changing, it is recommended that you keep the  
smartphone's operating system up-to-date, as  
well as the date and time of the smartphone  
and of the system.  
Connecting Apple® players  
To protect the system, do not use a USB  
hub.  
Connect the Apple® player to the USB socket using  
a suitable cable (not supplied).  
Play starts automatically.  
Control is via the audio system.  
The audio system will only play audio files with  
".wav", ".wma", ".aac", ".ogg" and ".mp3" file  
extensions, at bit rates between 32 Kbps and 320  
Kbps.  
It also supports VBR (Variable Bit Rate) mode.  
No other file types (".mp4", etc.) can be read.  
All ".wma" files must be standard WMA 9 files.  
The supported sampling rates are 11, 22, 44 and  
48 KHz.  
To avoid reading and display problems, we  
recommend choosing file names less than 20  
characters long that do not contain any special  
characters (e.g. “ ? . ; ù).  
Use only USB memory sticks in FAT32 format (File  
Allocation Table).  
The classifications available are those of  
the portable device connected (artists/  
albums/genres/playlists/audio books/  
podcasts). It is also possible to use a  
classification structured in the form of a  
library.  
The default classification used is by artist. To  
modify the classification used, return to the  
first level of the menu then select the desired  
classification (playlists for example) and  
confirm to go down through the menu to the  
desired track.  
For the list of eligible smartphones, go to the  
Brand's national website.