96
Safety
05
Recommended ISOFIX child seats
Locations for ISOFIX child seats
In accordance with European regulations, this
table indicates the options for installing ISOFIX
child seats on seats in the vehicle fitted with
ISOFIX mountings.
"RÖMER Duo Plus ISOFIX"
(size category: B1)
Also consult the user guide from the child
seat’s manufacturer to find out how to
install and remove the seat.
Group 1: from 9 to 18 kg
In the case of universal and semi-universal ISOFIX
child seats, the ISOFIX size category, determined
by a letter from A to G, is indicated on the child
seat next to the i-Size logo.
"RÖMER Baby-Safe Plus and its ISOFIX base"
(size category: E)
Group 0+: from birth to 13 kg
Suitable for forward-facing installation only.
Attached to rings A and ring B, referred to as
TOP TETHER, using an upper strap.
Only suitable for installation on the front
passenger seat or the rear side seats. The
head restraint on the vehicle seat must be
removed.
Installed "rearward facing" using an ISOFIX
base which is attached to rings A.
Installed only on the front passenger seat or on
the rear side seats.
The base has a support leg, height-adjustable,
which rests on the vehicle's floor.
This child seat can also be secured with a seat
belt. In this case, only the shell is used and
attached to the vehicle seat using the three-
point seat belt.
Three seat body angles: sitting, reclining, lying
down.
This child seat can also be used in seat
positions not equipped with ISOFIX mountings.
In this case, it must be secured to the vehicle's
seat by the three-point seat belt. Adjust the
front seat of the vehicle so that the child's feet
do not touch the backrest.
English 
