Get Technical Data Guide for Fiat 500 C 2 Door Second Generation (2021-2025)

TECHNICAL DATA

IDENTIFICATION DATA....................156

ENGINE ..........................................157

WHEELS.........................................158

DIMENSIONS..................................163

WEIGHTS........................................164

REFUELLING ..................................165

FLUIDS AND LUBRICANTS ............167

PERFORMANCE.............................170

Everything you may find useful for

understanding how your car is made

and works is contained in this chapter

and illustrated with data, tables and

graphics. For the enthusiasts and the

technician, but also just for those who

want to know every detail of their

car.

FUEL CONSUMPTION AND CO₂

EMISSIONS ....................................171

PRESCRIPTIONS FOR HANDLING

THE VEHICLE AT THE END OF ITS

LIFE ................................................172

155

D Chassis manufacture progressive

number.

E Maximum authorised weight of

vehicle fully laden.

F Maximum authorised weight of

vehicle when fully laden plus trailer.

G Maximum admitted weight on first

(front) axle.

H Maximum authorised weight on

second axle (rear).

B Colour name.

C Fiat colour code.

IDENTIFICATION

DATA

It is advisable to take note of the

identification codes. The following

identification codes are printed and

shown on the plates:

D Respray and touch up code.

Alternatively, depending on the version,

the Fiat Colour Code may be integrated

in the type-approval data summary

plate (field N fig. 137).

VIN plate.

CHASSIS MARKING

Chassis marking.

It is applied on the right side of the rear

floor in the boot and shows the

following fig. 139:

Bodywork paint identification plate

(where provided).

I Engine type.

L Bodywork version code.

M Spare part number.

Engine marking.

VEHICLE IDENTIFICATION

NUMBER (VIN) PLATE

N Fiat colour code (where provided).

BODYWORK PAINT

IDENTIFICATION PLATE

It is applied to the left side of the rear

floor in the luggage compartment

or, depending on the version, on the

passenger-side rear pillar. It shows the

following information fig. 137:

(where provided)

Depending on the version, the plate

may be applied to the external tailgate

pillar (left side) and contains the

following informationfig. 138:

F0S0114

139

type of vehicle;

chassis serial number.

ENGINE MARKING

It is stamped on the cylinder block and

includes the type and the engine serial

number.

F0S0668

137

A Name of Manufacturer.

F0S0113

138

B Type-approval number.

C Vehicle type identification code.

A Paint manufacturer.

156

ENGINE

GENERAL INFORMATION

1.2 8V 69 HP

1.2 8V 69 HP LPG

0.9 TwinAir 85 HP(*)

312A2000

Otto

Engine code

169A4000

Otto

169A4000

Otto

Cycle

Number and position of cylinders

Piston bore and stroke (mm)

Total displacement (cm³)

Compression ratio

4 in line

70.8 × 78.86

1242

4 in line

70.8 × 78.86

1242

2 in line

80.5 × 86.0

875

11.1 : 1

10 0.2 : 1

LPG

51

Petrol

51

Maximum power (EC) (kW)

51

69

62.5

85

Maximum power (EEC) (HP)

corresponding engine speed (rpm)

Maximum torque (EEC) (Nm)

Maximum torque (EEC) (kgm)

corresponding engine speed (rpm)

69

5500

102

10.4

3000

5500

102

10.4

3000

5500

102

10.4

3000

5500

145

14.8

1900

NGK ZKR7A-10 /

Champion RA8MCX4

Spark plugs

NGK ZKR7A-8

NGK LKR9EI-8

Unleaded petrol 95

R.O.N. (EN228

specifications)

Unleaded petrol 95

R.O.N. (EN228

specifications)

Unleaded petrol 95

R.O.N. (EN228

specifications)

LPG for motor

vehicles

Fuel

(*) For versions/markets, where provided

157

WHEELS

RIMS AND TYRES

Pressed steel or alloy rims. Tubeless

radial carcass tyres. All approved tyres

are listed in the registration document.

IMPORTANT If there are any

discrepancies between the Owner

Handbook and the registration

document, take the information from

the latter. For safe driving, the car must

be fitted with tyres of the same make

and type on all wheels.

IMPORTANT Do not use air chambers

with tubeless tyres.

193) 194) 197) 198) 199)

WHEEL GEOMETRY

Front wheels toe-in measured between

rims: 0.5 1 mm

The values refer to the car in running

order.

158

RIMS AND TYRES PROVIDED

Space saver spare wheel (*) Rim -

Tyre

Versions

Wheels

Tyres

Snow tyres

5½Jx14H2-ET35

6Jx15H2-ET35 (**)

6½Jx16H2-ET35 (**)

5½Jx14H2-ET35

6Jx15H2-ET35 (**)

6½Jx16H2-ET35 (**)

175/65 R14 82T

175/65 R14 86T

175/65 R14 82Q (M+S)

185/55 R15 82Q (M+S)

195/45 R16 84Q (M+S)

175/65 R14 82Q (M+S)

185/55 R15 82Q (M+S)

195/45 R16 84Q (M+S)

4.00Bx14 ET43 – 135x80 R14 84P

4.00Bx14 ET43 – 135x80 R14 84M

4.00Bx14 ET43 – 135x80 B14 84M

1.2 8V 69

HP

185/55 R15 82H (***)

195/45 R16 84H (***)

175/65 R14 82T

0.9

TwinAir

85 HP(*)

175/65 R14 86T

4.00Bx14 ET43 – 135x80 R14 84M

4.00Bx14 ET43 – 135x80 R14 84P

4.00Bx14 ET43 – 135x80 B14 84M

185/55 R15 82H (***)

195/45 R16 84H (***)

(*) For versions/markets, where provided

(**) Alloy wheel rim

(***) Not suitable for snow chains

159

COLD TYRE INFLATION PRESSURE (bar)

195) 196)

When the tires are warm, the inflation pressure should be + 0.3 bar in relation to the recommended figure.

With snow tyres, add +0.2 bar to the pressure value prescribed for other standard tyres.

However, recheck that the value is correct with the tyre cold.

Medium load

Full load

Space saver spare

wheel (*)

Tyres

Front

Rear

Front

Rear

175/65 R14 82T/86T

(1.2 ECO versions)

2.4 (**) /2.2 (***)

2.2(**) /2.0(***)

2.4 (**) /2.3(***)

2.2(**) /2.2 (***)

175/65 R14 82T

175/65 R14 86T

185/55 R15 82H

195/45 R16 84H

2.2

2.0

2.1

2.3

2.4

2.2

2.3

2.8

(*) For versions/markets, where provided

(**) ECO

(***) COMFORT: ECO consumption is not guaranteed

160

SNOW TYRES

IMPORTANT When using snow tyres

with a maximum speed index below the

one that can be reached by the car

(increased by 5%), place a notice in the

passenger compartment, plainly in

view, which states the maximum speed

allowed by the snow tyres (as per EC

Directive). All four tyres should be

the same (brand and track) to ensure

greater safety when driving and braking

as well as a good manoeuvrability.

Remember that you should not change

the rotation direction of the tyres.

Using different size or type (M+S, snow,

etc.) tyres between front and rear axle

may adversely affect car driveability,

with the risk of losing control of the car

and resulting accidents.

200)

Use snow tyres of the same size as the

standard tyres provided with the car.

All four tyres should be the same (brand

and track) to ensure greater safety

when driving and braking as well as a

good manoeuvrability.

Remember that you should not change

the rotation direction of the tyres.

The Fiat Dealership will be happy to

provide advice concerning the most

suitable type of tyre for the customer's

requirements.

IMPORTANT Snow chains cannot be

fitted to the space-saver wheel. If a

front tyre is punctured, replace a rear

wheel with the space-saver wheel and

move the rear wheel to the front axle. In

this way, with two normal drive wheels

at the front, snow chains can be fitted.

SNOW CHAINS

The winter performance of these tyres

is considerably reduced when the tread

thickness is less than 4 mm. Replace

them in this case.

Due to the specific characteristics of

snow tyres, in normal weather

conditions or on long motorway

journeys, the performance of these

tyres is lower than that of standard

tyres. Their usage should therefore be

restricted in accordance with their

type approval.

67) 68) 69)

WARNING

The use of snow chains should be in

compliance with local regulations of

each country. In certain countries, tyres

marked with code M+S (Mud and

Snow) are considered as winter

equipment; therefore their use is

equivalent to that of the snow chains.

Snow chains can be fitted to the tyres

of the front wheels (drive wheels) only.

Check the tension of the snow chains

after the first few metres have been

driven.

193) The space-saver wheel (for

versions/markets where provided) is

specific to your car, do not use it on other

models, or use the space-saver wheel

of other models on your car. The

space-saver wheel must only be used in

the event of an emergency. Never use it for

more than strictly necessary and never

exceed a speed of 80 km/h.

194) Snow chains cannot be fitted to the

space-saver wheel. So, if a front (drive)

wheel is punctured and chains are needed,

a rear wheel should be fitted to the front

of the car and the space-saver wheel

should be fitted to the rear. In this way,

equipped with two normal drive wheels at

the front, they can be fitted with snow

chains, thus resolving the emergency

situation

Using snow chains with tyres with

non-original dimensions may damage

the vehicle.

161

195) Remember that the road holding

qualities of your car also depend on correct

tyre pressures.

69) Avoid potholes, steps and pavements

and avoid driving long distances on roads

not covered with snow to avoid damaging

the car and the roadbed.

196) If tyre pressure is too low, the tyre

may overheat and be severely damaged as

a result.

197) Do not switch tyres from the

right-hand side of the vehicle to the

left-hand side, and vice versa.

198) Never submit alloy rims to repainting

treatments requiring the use of

temperatures exceeding 150°C. The

mechanical properties of the wheels could

be impaired.

199) DO NOT fit wheel hub caps when

using integral hub caps fixed (with springs)

to the steel rim and after sale tyres

provided with Rim Protector. Use of

unsuitable tyres and wheel caps may

cause sudden decrease of tyre pressure.

200) The maximum speed for snow tyres

marked “Q” is 160 km/h, while it is 190

km/h for “T” tyres and 210 km/h for "H"

tyres. The highway code speed limits must

however always be complied with.

WARNING

67) Keep the vehicle's speed down when

snow chains are fitted; never exceed 50

km/h.

68) With snow chains, use the accelerator

with extreme care to prevent, or to limit

as much as possible, slipping of the drive

wheels that could cause chain breakage,

resulting in damage to the car body or

mechanical components.

162

DIMENSIONS

Dimensions are expressed in mm and refer to the vehicle equipped with its standard-supplied tyres. Height is measured with

car unladen.

BOOT VOLUME Petrol versions: capacity (VDA standards): 185 litres. LPG versions: capacity (VDA standards): 165 litres.

F0S0605

140

Versions

A

B

C

D

E

F

G

I

1413 /

1414(**)

1407 /

1408(**)

3571

720

2300

551

1627

0.9 TwinAir 85 HP(°)

1488(*)

1.2 8V 69 HP

1413

1407

(°) For versions/markets, where provided

(*) Small variations in size are possible depending on the dimensions of the rims.

(**) With 195/45 R16 tyres

163

WEIGHTS

1.2 8V 69 HP

LPG

Versions

1.2 8V 69 HP

0.9 TwinAir 85 HP(°)

Unladen weight (with all fluids, fuel tank filled

to 90% and without optional equipment) (kg):

980

380

980

390

1000

960 / 975 (*)

980 / 995 (*)

380 / 365 (*)

385

Payload including the driver (kg) (**)

Maximum permitted loads (kg) (***)

- front axle:

400 / 385 (*)

770

640

770

640

770

640

830

640

830

640

– rear axle:

- total:

1360

1370

1385

Towable loads (kg)

– braked trailer:

800

400

800

400

(****)

– non-braked trailer:

Maximum load on the ball (braked trailer)

(kg):

60

(****)

(°) For versions/markets, where provided

(*) Versions with Dualogic transmission

(**) If special equipment is fitted (sunroof, etc.) the unladen car weight increases, thus reducing the specified payload in relation to the maximum permitted loads.

(***) Loads not to be exceeded. The user should carry goods in the luggage compartment and/on load carrying platform within the maximum permitted loads.

(****) IMPORTANT A trailer cannot be towed so there are no provisions for fitting a tow hook.

164

REFUELLING

1.2 8V 69 HP / 1.2

8V 69 HP LPG

Prescribed fuels and original lubricants

0.9 TwinAir 85 HP(°)

Fuel tank (petrol - litres):

35

35 / 30.5(***)

5.0

Unleaded petrol with RON no lower than 95

(EN228 specifications)

including a reserve of (litres):

5.0

Mixture of distilled water and PARAFLU ^UP

liquid at 50% (*)

Engine cooling system:

5.3

2.8

4.85 / 5.2 (**)

-

SELENIA DIGITEK P.E.

SELENIA K P.E. (1.2 8V 69 HP version) /

SELENIA MULTIPOWER GAS 5W-40 (1.2

8V 69 HP LPG)

Engine sump (litres):

2.5

-

3.2

-

SELENIA DIGITEK P.E.

SELENIA K P.E. (1.2 8V 69 HP version) /

SELENIA MULTIPOWER GAS 5W-40 (1.2

8V 69 HP LPG)

Engine sump and filter (litres):

2.8

1.65

Gearbox/differential casing (litres):

(°) For versions/markets, where provided

1.65

TUTELA TRANSMISSION GEARFORCE

(*) When the vehicle is used in particularly harsh weather conditions, we recommend using a 60-40 mixture of PARAFLU^UPand demineralised water.

(**) LPG versions

(***) LPG versions (including reserve). The figure already takes into account the 80% tank filling limit and the residual fluid required for priming and the maximum

permitted capacity. In addition, after different refuelling processes, this figure may vary due to differences between the network pump supply pressures, pumps

having different supply/locking features, tank not completely run out of fuel.

165

1.2 8V 69 HP / 1.2

8V 69 HP LPG

Prescribed fuels and original lubricants

0.9 TwinAir 85 HP(°)

Dualogic gearbox hydraulic activation

system:

TUTELA CS SPEED Special oil with “ATF

DEXRON III” type additive

0.70 (litres) / (0.59) kg

-

Hydraulic brakes circuit (kg):

0.55

-

TUTELA TOP 4/S

Hydraulic clutch controls (RH drive versions):

0.100

Windscreen and rear window washer fluid

reservoir (litres):

Mixture of water and PETRONAS DURANCE

SC35

2.5

(°) For versions/markets, where provided

166

FLUIDS AND LUBRICANTS

Your vehicle is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of

the Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emission

specifications. Lubricant quality is crucial for engine operation and duration.

If lubricants conforming to the required specifications are not available, products that meet the indicated specifications can be

used to top up; in this case optimal performance of the engine is not guaranteed.

70)

PRODUCT SPECIFICATIONS

Original fluids and

Use

Features

Specification

9.55535-GS1

Replacement interval

lubricants

Lubricants for 0.9

TwinAir 85 HP petrol

engines(°)

SELENIA DIGITEK P.E.

Contractual Technical

Reference N° F020.B12

SAE 0W-30 ACEA C2 /

API SN

According to Scheduled

Servicing Plan

SELENIA K P.E.

Lubricants for 1.2 8V

69 HP petrol engines

SAE 5W-40 ACEA C3 /

API SN

According to Scheduled

Servicing Plan

9.55535-S2

9.55535-T2

Contractual Technical

Reference N° F603.C07

SELENIA MULTIPOWER

GAS 5W-40

Contractual Technical

Reference N° F922.E09

Lubricant for petrol/

LPG engines

SAE 5W-40 ACEA C3 /

API SM

According to Scheduled

Servicing Plan

(°) For versions/markets, where provided

For TwinAir engines only use lubricants with indicated SAE grade and specifications.

167

WARNING

70) The use of products with different specifications than those indicated above could cause damage to the engine not covered by the

warranty.

Original fluids and

Use

Features

Specification

9.55550-MZ6

Applications

lubricants

TUTELA

TRANSMISSION

GEARFORCE Contractual

Technical Reference N°

F002.F10

SAE 75W API GL4 grade

synthetic lubricant.

Manual gearbox and

differential

Specific fluid for electro

hydraulic actuators "ATF

DEXRON III".

TUTELA CS SPEED

Contractual Technical

Reference N° F005.F98

Dualogic transmission

activation hydraulic system

oil

9.55550-SA1

Lubricants and

greases for drive

transmission

Molybdenum disulphide

grease, for use at high

temperatures. N.L.G.I.

consistency 1-2.

TUTELA ALL STAR

Contractual Technical

Reference N° F702.G07

Wheel side constant

velocity joints

9.55580-GRAS II

Grease for constant

velocity joints with low

friction coefficient. N.L.G.I.

consistency 0-1.

TUTELA STAR 700

Contractual Technical

Reference N° F701.C07

Differential side constant

velocity joints

9.55580-GRAS II

168

Original fluids and

lubricants

Use

Features

Specification

Applications

Synthetic fluid for brake

and clutch systems.

Exceeds specifications

F.M.V.S.S. no. 116 DOT 4,

ISO 4925 SAE J1704.

TUTELA TOP 4/S

Contractual Technical

Reference N° F005.F15

Hydraulic brakes and

hydraulic clutch controls

Brake fluid

9.55597 or MS.90039

Protective agent with

antifreeze action with

organic formulation. CUNA

NC 956-16, ASTM D 3306

Specifications.

Cooling circuits proportions

of use: 50% demineralised

water 50% PARAFLU^UP

(**)

PARAFLU^UP(*)

Protective agent for

radiators

9.55523 or MS.90032

9.55522 or MS.90043

Contractual Technical

Reference N° F101.M01

PETRONAS DURANCE

SC35

Contractual Technical

Reference N° F001.D16

Mixture of alcohol, water

and surfactants CUNA NC

956-II.

To be used diluted or

undiluted in windscreen

washer/wiper systems

Windscreen/rear

window washer fluid

(*) IMPORTANT Do not top up or mix with other fluids which have different specifications from those described.

(**) When the vehicle is used in particularly harsh weather conditions, we recommend using a mixture of 60% PARAFLU^UPand 40% demineralised water.

169

PERFORMANCE

Max. speed in km/h that can be reached after initial car use.

Versions

Maximum speed (km/h)

173

160

0.9 TwinAir 85 HP (*)

1.2 8V 69 HP

1.2 8V 69 HP LPG

(*) For versions/markets, where provided

170

FUEL CONSUMPTION AND CO₂EMISSIONS

The fuel consumption and CO₂emission figures declared by the manufacturer are determined on the basis of the type-approval

tests laid down by the applicable standards in the country where the vehicle is registered.

The type of route, traffic conditions, weather conditions, driving style, general condition of the car, trim level/equipment/

accessories, use of the climate control system, car load, presence of roof racks and other situations that adversely affect the

aerodynamics or wind resistance lead to different fuel consumption values than those measured. The fuel consumption will only

become more regular after driving the first 3000 km.

To find the specific fuel consumption and CO₂emission figures for this car, please refer to the data in the Certificate of

Conformity, and the related documentation that accompanies the vehicle.

171

PRESCRIPTIONS FOR HANDLING THE VEHICLE AT THE END OF

ITS LIFE

FCA has been committed for many years to safeguarding the environment through the constant improvement of its production

processes and manufacturing products that are increasingly "eco-compatible". To grant customers the best possible service

in terms of respecting environmental laws and in response to European Directive 2000/53/EC governing vehicles at the end of

their life, FCA is offering its customers the chance to hand over their vehicle at the end of its life without incurring any additional

costs. The European Directive sets out that when the vehicle is handed over the last keeper or owner should not incur any

expenses as a result of its market value.

To hand your vehicle over at the end of its life without extra cost, contact one of our dealerships if you are purchasing another

vehicle or an FCA-authorised collection and scrapping centre. These centres have been carefully chosen to offer high quality

service for the collection, treatment and recycling of vehicles at their end of life, respecting the surrounding environment.

You can find further information on these collection and scrapping centres either from an FCA dealership or by calling the

number in the Warranty Booklet or by consulting the websites of the various FCA brands.

172

Technical Data for Your Fiat 500 C 2 Door Second Generation (2021-2025)

Related Topics

Popular Owner Manuals

Latest Owner Manuals