Get Multimedia -> Uconnect Settings Guide for Fiat 500 E 4 Door Second Generation (2020-2024)

MULTIMEDIA 113

MULTIMEDIA

The risk of unauthorized and unlawful access to your

vehicle systems may still exist, even if the most recent

version of vehicle software (such as Uconnect software)

is installed.

Your Uconnect system also have VOLUME/MUTE button

on the central console.

UCONNECT SYSTEMS

For detailed information about your Uconnect 5 NAV

With 10.25-inch Display, refer to your Uconnect Radio

Instruction Manual.

Long press the VOLUME/MUTE button on the central

console to turn off the Uconnect screen. Push the

button again or tap the screen to turn the screen on.

WARNING!

NOTE:

Press the Back Arrow button to exit out of a Menu or

certain option on the Uconnect system.

● ONLY insert trusted media devices/components

into your vehicle. Media of unknown origin

could possibly contain malicious software, and

if installed in your vehicle, it may increase the

possibility for vehicle systems to be breached.

On some frequencies of the AM band reception may be

disturbed by interference on the signal arriving at the

system Uconnect™.

CUSTOMER PROGRAMMABLE FEATURES

NOTE:

5

Uconnect screen images are for illustration purposes

only and may not reflect exact software for your vehicle.

● As always, if you experience unusual

vehicle behavior, contact an authorized dealer

immediately.

CYBERSECURITY

NOTE:

Depending on applicability, your vehicle may be able to

send or receive information from a wired or wireless

network. This information allows systems and features

in your vehicle to function properly.

To help further improve user experience, features,

stability, etc., and minimize the potential risk of

a security breach, vehicle owners should routinely

check www.driveuconnect.com (US Residents) or

www.driveuconnect.ca (Canadian Residents) to learn

about available Uconnect software updates.

Your vehicle may be equipped with certain security

features to reduce the risk of unauthorized

Uconnect 5 NAV With 10.25-inch

Display Buttons On The Touchscreen

and unlawful access to vehicle systems and

wireless communications. Vehicle software technology

continues to evolve over time and FCA US LLC, working

with its suppliers, evaluates and takes appropriate

steps as needed. As always, if you experience unusual

behavior, contact an authorized dealer immediately,

UCONNECT SETTINGS

Press the Vehicle button, then press the Settings

tab on the top of the touchscreen. In this menu,

the Uconnect system allows you to access all of the

available programmable features.

The Uconnect system uses a combination of buttons on

the touchscreen and buttons on the faceplate located

on the left of the dashboard. These buttons allow you

to access and change Programmable Features. Many

features can vary by vehicle and packages.

page 208, or refer to your Uconnect Radio

Instruction Manual for additional contact information.

ð

114 MULTIMEDIA

NOTE:

When making a selection, press the button on the

touchscreen to enter the desired menu. Once in the

desired menu, press and release the preferred setting

option until a check mark appears next to the setting,

showing that setting has been selected. Once the

setting is complete, press the Vehicle button to exit to

the screen. Pressing the Up or Down Arrow button on

the right side of the screen will allow you to toggle up or

down through the available settings.

● Only one touchscreen area may be selected at a

time.

● Depending on the vehicle’s options, feature settings

may vary.

Display

When the Display button is pressed on the touchscreen, the system will display the options related to the theme (if equipped), brightness, and color of the touchscreen. The

available settings are:

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Language

Description

This setting will change the language of the Uconnect system and Instrument Cluster

Display. The available languages are English, Français, Español, and Italiano.

This setting will allow you to set the brightness manually or have the system set

it automatically. The “Auto” setting has the system automatically adjust the display

brightness. The “Manual” setting will allow the user to adjust the brightness of the

display.

Display Mode

Display Brightness Daytime

Display Brightness Nighttime

This setting will allow you to set the brightness when it is daytime. To access this

setting, Display Mode must be set to “Manual”. The “+” setting will increase the

brightness; the “-” will decrease the brightness.

This setting will allow you to set the brightness when it is nighttime. To access this

setting, Display Mode must be set to “Manual”. The “+” setting will increase the

brightness; the “-” will decrease the brightness.

Set Theme

Units

This setting will allow you to adjust your theme. Setting options are “Theme 1, Theme

2, Theme 3, and Theme 4.

This setting will allow you to change the units to “US”, “Metric”, or “Custom”. The

available options within Custom are “Speed” (MPH or km/h), “Distance” (mi or km),

“Consumption” (mi/kwh, or km/kWh or kWh/100km or kWh/mi or MPGe), “Pressure”

(psi, kPa, or bar), and “Temperature” (°C or °F) units of measurement independently.

This setting will allow you to turn the touchscreen beep on or off.

This setting will allow the main category bar labels to be shown on or off.

Touchscreen Beep

Show Main Category Bar Labels

MULTIMEDIA 115

Setting Name

Description

Navigation Next Turn Pop-ups Displayed in Cluster

Phone Pop-ups Displayed In Cluster

This setting will display navigation prompts in the Instrument Cluster Display.

This setting will display smartphone notifications and messages in the Instrument

Cluster Display.

5

116 MULTIMEDIA

My Profile

When the My Profile button is pressed on the touchscreen, the system displays options related to the vehicle’s profiles.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Language

Description

This setting will change the language of the Uconnect system and Instrument Cluster

Display. The available languages are English, Français, Español, and Italiano.

This setting will adjust the display for the radio to “Auto” or “Manual”. “Manual” allows

for more customization with the radio display.

Display Mode

This setting will allow you to set the brightness when it is daytime. To access this

setting, Display Mode must be set to “Manual”. The “+” setting will increase the

brightness; the “-” will decrease the brightness.

Display Brightness Daytime

This setting will allow you to set the brightness when it is nighttime. To access this

setting, Display Mode must be set to “Manual”. The “+” setting will increase the

brightness; the “-” will decrease the brightness.

Display Brightness Nighttime

Set Theme

Units

This setting will allow you to adjust your theme. Setting options are Theme 1, Theme 2,

Theme 3, and Theme 4.

This setting will allow you to customize the units for “Speed” (MPH or km/h), “Dis-

tance” (mi or km), “Consumption” (mi/kwh, or km/kWh or kWh/100km or kWh/mi or

MPGe), “Pressure” (psi, kPa, or bar), and “Temperature” (°C or °F) units of measure-

ment independently.

Touchscreen Beep

This setting will allow you to turn the touchscreen beep on or off.

This setting will allow the main category bar labels to be shown on or off.

This setting will display navigation prompts in the Instrument Cluster Display.

This setting will display smartphone notifications and messages in the Instrument

Cluster Display.

Show Main Category Bar Labels

Navigation Next Turn Pop-ups Displayed in Cluster

Phone Pop-ups Displayed In Cluster

This setting will allow you to set the time format (AM/PM). Sync Time With GPS must

be “Off” for this setting to be available. The “12 hrs” setting will set the time to a

12-hour format. The “24 hrs” setting will set the time to a 24-hour format.

This setting will allow you to change the voice options for the radio to “Male” or

“Female”.

Time Format

Voice Options

MULTIMEDIA 117

Setting Name

Wake Up Word

Description

This setting will allow you to set the system “Wake Up” word. The available options are

“Off”, “Hey, Uconnect” and “Hey, Fiat”.

Voice Barge-in

Show Command List

Navigation Settings

This setting will allow Voice Barge-in to be turned on or off.

This setting will allow the Command List to be shown on or off.

This setting will redirect to the list of Navigation settings. Refer to your Uconnect Radio

Instruction Manual for further information.

Auto-On Driver Heated/Ventilated Seat & Heated Steering Wheel

This setting will activate the vehicle’s comfort system and heated seats or heated

steering wheel when the vehicle is remote started or ignition is started. The “Off”

setting will not activate the comfort systems. The “All Start” setting will activate the

comfort systems whenever the vehicle is started.

Radio Off Delay

This setting will keep certain electrical features running after the engine is turned off.

When any door is opened, the electronics will deactivate. The available settings are “0

min” and “20 min”.

Radio Off With Door

This setting will allow you to determine if the radio shuts off when any of the doors are

opened.

5

Audio Settings

This setting will open the submenu, containing the audio settings

page 125.

ð

App Drawer Favoriting Pop-ups

This setting will allow you to favorite app drawer pop-ups with “On” and “Off” options.

This setting will allow you to unfavorite app drawer pop-ups with “On” and “Off”

options.

App Drawer Unfavoritings Pop-ups

New Text Message Pop-ups

Missed Calls Message

This setting will allow you to have pop-up notifications for new text messages. Setting

options are “On” and “Off”.

This setting will allow you to have pop-up notifications for missed calls. Setting options

are “On” and “Off”.

This setting will allow you to have pop-up notifications for Navigation. Setting options

are “On” and “Off”.

Navigation Pop-ups

Reset App Drawer to Default Order

Restore Settings to Default

More Profile Options

This setting will reset the app drawer to its factory default layout.

This setting will return all the previously changed settings to their factory defaults.

This setting will give access to more profile options.

118 MULTIMEDIA

Safety/Driving Assistance

When the Safety/Driving Assistance button is pressed on the touchscreen, the system displays the options related to the vehicle’s safety settings. These options will differ

depending on the features equipped on the vehicle. The settings may display in list form or within subfolders on the screen. To access a subfolder, select the desired folder;

the available options related to that feature will then display on the screen.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Auronomous Emergency Brake Control

This submenu ontains the following settings: AEB Control and AEB Control Sensitivity.

The avaialble options for AEB Control are "Off", "Only Warning", and "Warning + Active

Braking". The options fr AEB Control are "Near", "Med", and "Far".

Forward Collision Warning — Located In Automatic Emergency Braking Submenu

This setting will turn the Forward Collision Warning (FCW) system on or off. The “Off”

setting will deactivate the FCW system. The “Warning Only” setting will provide only an

audible chime when a collision is detected. The “Warning + Active Braking” setting will

provide an audible chime and apply some brake pressure when a collision is detected.

Forward Collision Warning Sensitivity — Located In Automatic Emergency Braking Sub- This setting will change the distance at which the Forward Collision Warning alert

menu

sounds. The “Medium” setting will have the FCW system signal when an object is in

view, and the possibility of a collision is detected. The “Near” setting will have the FCW

system signal when the object is closer to the vehicle. The “Far” setting will have the

FCW system signal when an object is at a far distance from the vehicle.

This setting will turn the Pedestrian Emergency Braking system on or off.

This setting will activate the system that will alert the driver when a lane departure

is detected. If selected, steering assist can be provided. The available options are

“Vibration Only”, “Steering Assist Only”, and “Vibration + Steering Assist”.

This setting will set the warning type for Active Lane Management. The available

options are “Early”, “Medium”, and “Late”.

This setting will set the strength of the steering wheel vibration. The available options

are “Low”, “Medium”, and “High”.

This setting will set the warning type for LaneSense. The available options are “Early”,

“Medium”, and “Late”.

This setting will set the strength of the LaneSense system. The available options are

“Low”, “Medium”, and “High”.

Pedestrian Emergency Braking — Located In Automatic Emergency Braking Submenu

Lane Management — Located In Active Lane Management

Lane Control Warning — Located In Lane Control

Lane Control Strength — Located In Lane Control

LaneSense Warning — Located In LaneSense submenu

LaneSense Strength — Located In LaneSense submenu

MULTIMEDIA 119

Setting Name

ParkSense

Description

This setting will change the type of ParkSense alert when a close object is detected.

The “Sound Only” setting will provide an audible chime when an object is detected.

The “Sound and Display” setting will provide both an audible chime and a visual

display when an object is detected.

Front ParkSense Volume

Rear ParkSense Volume

Rear ParkSense Braking Assist

Active ParkSense Mode

This setting adjusts the volume of the Front ParkSense system. The available settings

are “Low”, “Medium”, and “High”.

This setting adjusts the volume of the Rear ParkSense system. The available settings

are “Low”, “Medium”, and “High”.

This setting will provide braking assistance if the Rear ParkSense system senses a

collision with an object.

This setting will control Active ParkSense functionality between fully autonomous park-

ing and semi-autonomous parking. The available options are “Full Auto” and “Steering

Only”.

Active ParkSense Proximity Chime

Blind Spot Assist

This setting will turn the Active ParkSense Proximity Chimes on or off. This setting in

only available when Active ParkSense Mode is set to “Full Auto”.

This setting will change the type of alert provided when an object is detected in the

vehicle’s blind spot. The “Off” setting will turn off Blind Spot Alert. The “Lights” setting

will activate the Blind Spot Alert lights on the outside mirrors. The “Lights & Chime”

setting will activate both the lights on the outside mirrors and an audible chime.

This setting will turn Traffic Sign Assist on or off.

5

Traffic Sign Assist

Traffic Sign Assist Warning

This setting will allow you to set the warning type related to the traffic sign. The

available options are “Off”, “Visual”, and “Visual + Chime”.

New Speed Zone Indication

Drowsy Driver Alert

This setting will allow you to set if the system will warn you that the speed limit has

changed in an area. The available options are “Off”, “Visual”, and “Visual + Chime”.

This setting will monitor the driver’s driving habits and warn you of any changes,

indicating that the driver may be drowsy. The available options are “On” and “Off”.

This setting will vibrate the steering wheel when a lane departure is detected. The

available options are “On” and “Off”.

This setting will turn the Side Distance Warning on or off and set how the system will

communicate with the user. The “Off” setting will deactivate the system. The “Sound”

setting will provide an audible chime to the user. The “Sound And Display” setting will

provide both an audible chime and a visual display.

Highway Assist Steering Wheel Vibration

Side Distance Warning

120 MULTIMEDIA

Setting Name

Description

Rear Seat Alert

When this setting is turned on and the rear doors are opened while the engine is

running, or if the engine is turned on within 10 minutes of the door opening, a

message will appear to check the rear seat when the vehicle is powered OFF.

This setting will turn the Hill Start Assist system on or off.

Hill Start Assist

Clock & Date

When the Clock & Date button is pressed on the touchscreen, the system displays the different options related to the vehicle’s internal clock.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Sync Time With GPS

This setting will sync the time to the GPS receiver in the system. The system will

control the time via the GPS location.

Set Time Hours

Set Time Minutes

Time Format

Under the Set Time submenu, this setting will allow you to set the hours. Sync Time

With GPS must be off for this setting to be available. The “+” setting will increase the

hours. The “-” setting will decrease the hours.

Under the Set Time submenu, this setting will allow you to set the minutes. Sync Time

With GPS must be off for this setting to be available. The “+” setting will increase the

minutes. The “-” setting will decrease the minutes.

This setting will allow you to set the time format (AM/PM). Sync Time With GPS must

be off for this setting to be available. The “12 hrs” setting will set the time to a

12-hour format. The “24 hrs” setting will set the time to a 24-hour format. You will also

be able to adjust the clock.

Show Time In Satus Bar

Set Date

This setting will display the time in the radio status bar.

This setting will allow you to set the date.

Show Time and Date During Screen Off

This setting will display the time and date when the radio is shut off.

MULTIMEDIA 121

Phone/Bluetooth®

When the Phone/Bluetooth® button is pressed on the touchscreen, the system displays the options related to Bluetooth® connectivity from an external audio device or

smartphone. The list of paired audio devices or smartphones can be accessed from this menu.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Device Manager

Do Not Disturb All

This setting will open the Device Manager main screen.

This setting will open the Do Not Disturb All settings menu. The available options are

“On” and “Off”.

Enable Two Active Phones

Phone Pop-Ups Displayed In Cluster

Voice

This setting will enable or disable two active phones within the vehicle. The setting

options are “On” and “Off”.

This setting will activate phone message pop-ups in the Instrument Cluster Display.

5

When the Voice button is pressed on the touchscreen, the system displays the options related to the vehicle’s Voice Recognition feature.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Voice Options

Wake Up Word

Description

This setting will allow you to change the system’s voice to either “Male” or “Female”.

This setting will allow you to set the system’s “Wake Up” word. The available options

are “Off”, “Hey, Uconnect”, and “Hey, Fiat”.

Voice Barge-In

This setting allows you to respond to a Voice Response before the statement is

completed by the system. The available options are “On” and “Off”.

This setting will allow you to turn the Command List on or off. The “Always” setting will

always show the Command List. The “With Help” setting will show the Command List

and provide a brief description of what the command does. The “Never” setting will

turn the Command List off.

Show Command List

122 MULTIMEDIA

Navigation

When the Navigation button is pressed on the touchscreen, the system displays options related to the vehicle’s built-in Navigation system. These settings can change which

icons display on the map, how “time to arrival is calculated”, and route types.

For more information on Navigation and settings, refer to your Uconnect Radio Instruction Manual.

Camera

When the Camera button is pressed on the touchscreen, the system displays the options related to the vehicle’s camera features.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

ParkView Backup Camera

ParkView Backup Camera Delay

This setting will turn the ParkView Backup Camera on or off.

This setting will add a delay to the ParkView Backup Camera when shifting out of

REVERSE.

ParkView Backup Camera Active Guidelines

Fixed ParkView Backup Camera Guidelines

Surround View Camera Delay

This setting will turn the ParkView Backup Camera Active Guidelines on or off.

This setting will turn the Fixed ParkView Backup Camera Guidelines on or off.

This setting will add a timed delay to the Surround View Camera when shifting out of

REVERSE.

Surround View Camera Guidelines

This setting will turn the Surround View Camera Guidelines on or off.

Mirrors & Wipers

When the Mirrors & Wipers button is pressed on the touchscreen, the system displays the option related to the vehicle’s mirrors and wipers.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Rain Sensing Auto Wipers

This setting will turn the Rain Sensing Auto Wipers on or off.

MULTIMEDIA 123

Lights

When the Lights button is pressed on the touchscreen, the system displays the options related to the vehicle’s exterior and interior lights.

NOTE:

● When the “Daytime Running Lights” feature is selected, the daytime running lights can be turned on or off. This feature is only allowed by law in the country of the vehicle

purchase.

● Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Headlight Sensitivity

This setting will allow you to set the sensitivity of the headlights depending on the

amount of visible light. The greater the sensitivity set, the less the external light

variation required to turn on the lights (e.g. with a setting on level 3 at sunset, the

headlights turn on earlier than in levels 1 and 2). The available levels are “Level 1:

Minimum Sensitivity”, “Level 2: Medium Sensitivity”, and “Level 3: Maximum Sensitivi-

ty”.

5

Headlight Off Delay

This setting will allow you to set the amount of time it takes for the headlights to shut

off after the vehicle is turned off. The available settings are “0 sec”, “30 sec”, “60

sec”, and “90 sec”.

Headlight Illumination On Approach

This setting will allow you to set the amount of time it takes for the headlights to shut

off after the vehicle is unlocked. The available settings are “0 sec”, “30 sec”, “60

sec”, and “90 sec”.

Auto Dim High Beams

Greeting Lights

This setting will allow you to turn the Auto Dim High Beams on or off.

This setting will turn the Greeting Lights on or off.

Daytime Running Lights

Cornering Lights

This setting will allow you to turn the Daytime Running Lights on or off.

When this setting is selected, if the steering wheel rotation angle is large or the turn

signal indicators are on, a light will turn on, on the relevant side to improve visibility at

night.

Headlight Dip

This setting will lower the headlights when driving on the opposite side of the road.

The available options are “On” and “Off”.

Flash Lights With Lock

This setting will allow you to turn the flashing of the lights when the Lock button is

pushed on the key fob on or off.

124 MULTIMEDIA

Brakes

After pressing the Brakes button on the touchscreen, the following settings will be available:

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Hold 'n Go

Auto Park Brake

Brake Service

Description

This setting will turn the Hold 'n Go feature on or off.

This setting will turn the Auto Park Brake on or off.

This setting will allow you to retract the brakes for servicing.

Doors & Locks

When the Doors & Locks button is pressed on the touchscreen, the system displays the options related to locking and unlocking the vehicle’s doors.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Auto Door Locks

Auto Unlock On Exit

Flash Lights With Lock

This setting will automatically lock the doors when the vehicle is in motion.

This setting will unlock the doors when any of the doors are opened from the inside.

This setting will allow you to turn the flashing of the lights when the Lock button is

pushed on the key fob on or off.

Sound Horn With Lock

1st Press Of Key Fob Unlocks

Keyless Entry

This setting will sound the horn when the Lock button is pushed on the key fob. The

“Off” setting will not sound the horn when the Lock button is pushed. The “1st Press”

setting will sound the horn when the Lock button is pushed once. The “2nd Press”

setting will sound the horn when the Lock button is pushed twice.

This setting will change how many pushes of the Unlock button on the key fob are

needed to unlock all the doors. The “Driver Door” setting will only unlock the driver

door on the first push on the Unlock button. The “All Doors” setting will unlock all

doors on the first push of the Unlock button.

This setting will allow you to turn the Keyless Entry feature (Keyless Enter ‘n Go™) on

or off.

Setting Name

Description

Auto Door Locks

This setting will allow you to change if the doors lock automatically when the vehicle

reaches 15 mph (24 km/h).

MULTIMEDIA 125

Seats & Comfort

When the Seats & Comfort button is pressed on the touchscreen, the system displays the option related to the vehicle’s comfort systems when remote start has been activated

or the vehicle has been started.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Auto-On Driver Heated/Ventilated Seat & Steering Wheel With Vehicle Start

This setting will activate the vehicle’s comfort systems and heated seats or heated

steering wheel when the vehicle is remote started or ignition is started. The “Off”

setting will not activate the comfort systems. The “All Start” setting will activate the

comfort systems whenever the vehicle is started.

Key Off Options

When the Key Off Options button is pressed on the touchscreen, the system displays the options related to vehicle shutoff. These settings will only activate when the ignition is

set to OFF.

5

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Radio Off Delay

This setting will keep the radio running after the engine is turned off. When any door

is opened, the electronics will deactivate. The available settings are “0 min” and “20

min”.

Radio Off With Door

Headlight Off Delay

This setting will shut the radio off when the door is opened. The available settings are

“On” and “Off”.

This setting will allow you to set the amount of time the headlights remain on after

the vehicle has been turned off. The “+” will increase the amount of time. The “-” will

decrease the amount of time.

126 MULTIMEDIA

Audio

When the Audio button is pressed on the touchscreen, the system displays options related to the vehicle’s sound system. These settings can change the audio location within

the vehicle, adjust the bass or treble levels, and auto-play settings from an audio device or smartphone.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Balance/Fade

Description

This setting will adjust audio levels from specific speakers in the front/back and left/

right of the vehicle. The Speaker icon can be moved to set audio location.

This setting will adjust the “Bass”, “Mid”, and “Treble” ranges of the audio.

This setting will adjust audio volume as speeds increase. At a higher setting, the

volume will increase more as the vehicle speeds up. The available settings are “Off”,

“1”, “2”, and “3”.

Equalizer

Speed Adjusted Volume

Surround Sound

AUX Volume Offset

This setting will turn the Surround Sound system on or off.

This setting will tune the audio levels from a device connected through the AUX port.

The available settings are “+” and “-”.

Auto Play

Auto-On Radio

This setting will automatically begin playing audio from a connected device.

This setting will automatically turn the radio on when the vehicle is started. The

available settings are “Off”, “On”, and “Recall Last”. With Recall Last, the system

resumes the previous task before vehicle shut off.

Radio Off With Door

Loudness

This setting will keep the radio on when a door is opened or until the Radio Off Delay

time is reached. The available settings are “On” and “Off”.

This setting improves the sound quality at lower volumes. The available options are

“On” and “Off”.

Volume Adjustment

This setting will allow you to set the audio volume levels for each option (Media,

Phone, Navigation, etc.). You can set the volume between 0 and 38.

Notifications

When the Notifications button is pressed on the touchscreen, the system displays the options related to Notifications for the system.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

MULTIMEDIA 127

Setting Name

Description

Notification Sounds

This setting will turn off the Notification chime that plays when a new notification is

sent. The options are “On” and “Off”.

App Drawer Favoriting Pop-Ups

App Drawer Unfavoriting Pop-Ups

This setting turns the App Favorited Pop-Up on or off.

This setting turns the App Unfavorited Pop-Up on or off.

This setting turns receiving/storing a pop-up for new text messages of any connected

phone on or off.

New Text Message Pop-Ups

This setting turns receiving/storing a pop-up for missed calls of any connected phone

on or off.

This setting turns receiving/storing predictive Navigation Pop-Ups on or off.

Missed Calls Message

Navigation Pop-Ups

SiriusXM® Setup

When the SiriusXM® Setup button is pressed on the touchscreen, the system displays the options related to SiriusXM® satellite radio. These settings can be used to skip

specific radio channels and restart favorite songs from the beginning.

5

NOTE:

● A subscription to SiriusXM® satellite radio is required for these settings to be functional.

● Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

SiriusXM® Account, Profile, And Settings

This setting will redirect you to the SiriusXM® settings menu within the SiriusXM®

menu.

Block Explicit

This setting will skip over content labeled as explicit. The available settings are “On”

and “Off”.

Software Updates

When the Software Updates button is pressed on the touchscreen, the system will display the setting related to updating the Uconnect software.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

128 MULTIMEDIA

Setting Name

Description

This setting will allow software updates to happen over Wi-Fi. Selectable options for

the setting are “On” and “Off”.

Software Downloads over Wi-Fi

System Information

When the System Information button is pressed on the touchscreen, the system displays the radio system information.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Version Information

Software Licenses

Thi will display the current build number.

This will display the software licensing information screen.

Reset

When the Reset button is pressed on the touchscreen, the system displays the options related to resetting the Uconnect system back to its default settings. These settings can

clear personal data and reset selected settings from other menus.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Restart Radio

This setting will reboot the radio.

Reset Apps Drawer To Default Order

This setting will return the apps drawer to the default order. The available options are

“Yes” and “Cancel”. The X button can also be pressed to cancel the screen.

This setting will delete all of the installed apps if there is an issue with using or

installing an app. The available options are “Back” and “Next”.

This setting will return all the previously changed settings to their factory defaults.

This setting will display a pop-up that gives you the option to clear all personal data

from the system, including Bluetooth® devices and presets.

Restore Apps to Default Order

Restore Settings to Default

Clear Personal Data

NOTE:

Performing this function may take several minutes to complete.

MULTIMEDIA 129

Setting Name

Description

Reset Wi-Fi Password For Projection

This setting will allow you to reset the vehicle’s Wi-Fi password for smartphone projec-

tion. The available options are “Yes” and “Cancel”. The X button can also be pressed

to cancel the screen.

Factory Reset

This setting will restore the radio to its factory default settings.

The left-hand control is a rocker-type switch with a

push button in the center. The function of the left-hand

control is different depending on which mode you are

in.

STEERING WHEEL AUDIO CONTROLS

The remote sound system controls are located on the

rear surface of the steering wheel at the three and nine

o’clock positions.

RADIO OPERATION AND MOBILE PHONES

Under certain conditions, the mobile phone being on

in your vehicle can cause erratic or noisy performance

from your radio. This condition may be lessened or

eliminated by relocating the mobile phone antenna.

This condition is not harmful to the radio. If your

radio performance does not satisfactorily clear by

the repositioning of the antenna, it is recommended

that the radio volume be turned down or off during

mobile phone operation when not using Uconnect (if

equipped).

The following describes the left-hand control operation

in each mode:

RADIO OPERATION

Pushing the top of the switch will seek up for the next

available station and pushing the bottom of the switch

will seek down for the next available station.

5

The button located in the center of the left-hand control

will tune to the next preset station that you have

programmed in the radio presets.

REGULATORY AND SAFETY INFORMATION

USA/CANADA

Exposure to Radio Frequency Radiation

MEDIA MODE

The radiated output power of the internal wireless radio

is far below the FCC and IC radio frequency exposure

limits. Nevertheless, the wireless radio will be used in

such a manner that the radio is 8 inches (20 cm) or

further from the human body.

Remote Sound System Controls

Pushing the top of the switch skips to the next track

on the selected media (AUX/USB/Bluetooth®). Pushing

the switch up twice will go forward two tracks. Pushing

the bottom switch goes to the beginning of the current

track, or the beginning of the previous track if it is

within eight seconds after the current track begins to

play. Double pressing the bottom button switch will skip

to the previous track if it is after eight seconds into the

current track.

The right-hand control is a rocker-type switch with a

push button in the center and controls the volume and

mode of the sound system. Pushing the top of the

rocker switch will increase the volume, and pushing the

bottom of the rocker switch will decrease the volume.

The internal wireless radio operates within guidelines

found in radio frequency safety standards and

recommendations which reflect the consensus of the

scientific community.

Pushing the right-hand control’s center button will make

the radio switch between the various modes available

(AM/FM/SXM or Media, etc.).

Multimedia -> Uconnect Settings for Your Fiat 500 E 4 Door Second Generation (2020-2024)

Related Topics

Multimedia

Popular Owner Manuals

Latest Owner Manuals