2014-2024 Fiat 500 X 4 Door TECHNICAL SPECIFICATIONS -> FLUIDS AND LUBRICANTS User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

TECHNICAL SPECIFICATIONS -> FLUIDS AND LUBRICANTS for Your Fiat 500 X 4 Door First Generation (2014-2024)

FLUIDS AND LUBRICANTS  
Your vehicle is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of  
the Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emission  
specifications. Lubricant quality is crucial for engine operation and duration.  
79)  
PRODUCT SPECIFICATIONS  
Genuine fluids and  
lubricants  
Use  
Characteristics  
Specification  
Replacement interval  
SELENIA DIGITEK P.E.  
Contractual Technical  
Reference No. F020.B12  
Lubricant for petrol  
engines  
SAE 0W-30 ACEA C2 /  
API SN  
9.55535-GS1 or  
MS.90048  
According to Scheduled  
Servicing Plan  
SELENIA WR  
Lubricant for diesel  
engines  
9.55535-DS1 or  
MS.90047  
FORWARD Contractual  
Technical Reference No.  
F842.F13  
According to Scheduled  
Servicing Plan  
SAE 0W-30 ACEA C2  
If lubricants compliant with the required specifications are not available, products that comply with the minimum required  
characteristics can be used for topping up; in this case optimal performance of the engine is not guaranteed.  
WARNING  
79) The use of products with specifications different than those indicated above could cause damage to the engine that is not covered by the  
warranty.  
199  
Genuine fluids and  
lubricants  
Use  
Characteristics  
Specification  
Applications  
TUTELA  
Lubricant for versions with  
AT9 automatic  
transmission  
9.55550-AV5 or  
MS.90030-A5  
TRANSMISSION AS8  
Contractual Technical  
Reference No. F139.111  
Synthetic lubricant.  
Lubricant for electro-  
hydraulic actuator  
(versions with twin clutch  
automatic transmission)  
TUTELA CS SPEED  
Contractual Technical  
Reference No. F005.F98  
Fully synthetic oil with  
dedicated additive.  
9.55550-SA1 or  
MS.90030-H1  
TUTELA  
TRANSMISSION  
GEARFORCE  
Contractual Technical  
Reference No. F002.F10  
SAE 75W grade synthetic  
lubricant.  
9.55550-MZ6 or  
MS.90030-M1  
Manual gearbox and  
differential  
Molybdenum disulphide  
grease, for use at high  
operating temperatures.  
N.L.G.I. consistency 1-2.  
TUTELA ALL STAR  
Contractual Technical  
Reference No. F702.G07  
Wheel side constant  
velocity joints  
Lubricants and greases  
for drive transmission  
9.55580-GRAS II  
9.55580-GRAS II  
9.55550-DA6  
Specific grease for  
constant velocity joints  
with low friction  
coefficient. N.L.G.I.  
consistency 0-1.  
TUTELA STAR 700  
Contractual Technical  
Reference No. F701.C07  
Differential-side constant  
velocity joints  
TUTELA  
SAE 75W-90 API GL5  
grade synthetic lubricant.  
TRANSMISSION B-5X  
Contractual Technical  
Reference No. F006.814  
Idler unit (PTU) (4x4  
versions)  
TUTELA  
TRANSMISSION  
COMPAQ DRIVE  
Contractual Technical  
Reference No. F007.814  
SAE 75W-90 API GL5  
grade synthetic lubricant.  
Rear differential (4×4  
versions)  
9.55550-DA7  
200  
Genuine fluids and  
lubricants  
Use  
Characteristics  
Specification  
Applications  
Synthetic fluid for brake  
and clutch systems.  
Exceeds specifications:  
FMVSS no. 116 DOT 4,  
ISO 4925 SAE J1704.  
Hydraulic brakes and  
hydraulic clutch controls  
Brake fluid  
9.55597 or MS.90039  
Red protective agent with  
antifreeze action, based  
on inhibited monoethylene  
glycol with organic  
formula. Exceeds CUNA  
NC 956-16, ASTM D  
3306 specifications.  
PARAFLUUP Contractual  
Technical Reference No.  
F101.M01  
Cooling circuit usage  
percentage: 50% water  
50% PARAFLUUP (**)  
Protective agent for  
radiators  
9.55523 or MS.90032  
9.55522 or MS.90043  
Mixture of spirits and  
surfactants. Exceeds  
CUNA NC 956-11  
specifications.  
TUTELA  
To be used diluted or  
undiluted in screen  
washer/wiper systems  
Windscreen/rear  
window washer fluid  
PROFESSIONAL SC 35  
Contractual Technical  
Reference No. F201.D02  
(**) When the vehicle is used in particularly harsh weather conditions, we recommend using a mixture of 60% PARAFLUUP and 40% demineralised water.  
201  

Related Topics

TECHNICAL SPECIFICATIONS
IDENTIFICATION DATA ENGINE WHEELS DIMENSIONS WEIGHTS SUPPLIES PERFORMANCE FUEL CONSUMPTION CO2 EMISSIONS PRESCRIPTIONS FOR HANDLING THE VEHICLE AT THE END OF ITS LIFE

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot