Advertisement

Advertisement

Things To Know Before Starting Your Vehicle -> Remote Keyless Entry for Your Fiat 500 SUV First Generation (2007-2019)

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13  
the vehicle and open a door, the alarm will sound. If this  
occurs, disarm the vehicle security alarm.  
If the vehicle security alarm is armed and the battery  
becomes disconnected, the vehicle security alarm will  
remain armed when the battery is reconnected. The  
exterior lights will flash, and the horn will sound. If this  
occurs, disarm the vehicle security alarm.  
2
REMOTE KEYLESS ENTRY  
This system allows you to lock or unlock the doors and  
liftgate from distances up to approximately 66 ft (20 m)  
using a hand-held key fob. The key fob does not need to  
be pointed at the vehicle to activate the system.  
Key Fob  
NOTE: The line of transmission must not be blocked  
with metal objects.  
To Unlock The Doors, Liftgate, And Charge Port  
Door  
Push and release the unlock button on the key fob once  
to unlock the driver’s door or twice, within five sec-  
onds, to unlock all doors, liftgate, and charge port door.  
The turn signal lights will flash to acknowledge the  
unlock signal. The illuminated entry system will also  
turn on.  
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE  
Remote Key Unlock, Driver Door/All Doors 1st  
Press  
NOTE: The remote keyless power top function can be  
used to open the power top to the spoiler position.  
This feature lets you program the system to unlock  
either the driver’s door or all doors on the first push of  
the unlock button on the key fob. To change the current  
setting, refer to “Uconnect Settings” in “Understanding  
Your Instrument Panel” for further information.  
Opening Power Top Remote Function:  
OPEN — Push and hold the unlock button down on the  
key fob for a minimum of three seconds to initiate  
Power Top Open. The roof will stop opening whenever  
the unlock button on the key fob is released, or when it  
reaches the spoiler position.  
Opening Power Top Remote Function  
The remote keyless power top function can only be  
used with the engine off.  
NOTE: If your power convertible top does not open  
with the remote, please refer to the ЉPower Convertible  
Top Relearn Procedure” in “Understanding The Fea-  
tures Of Your Vehicle” for further information.  
WARNING!  
Failure to follow these warnings can result in inju-  
ries that are serious or fatal to you, your passengers,  
and others around you:  
Before operating the power top, make sure that no  
moving parts of the convertible top can injure a  
person or animal.  
(Continued)  
Key Fob Unlock/Power Top Open Button Location  
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15  
Key Fob Battery Replacement  
WARNING! (Continued)  
NOTE: Perchlorate Material  
may apply. See www.dtsc.ca.gov/hazardouswaste/  
perchlorate.  
special handling  
Never place any extremities (hands, feet, etc.) near  
the convertible top components, the upper wind-  
shield area, the shelf area behind the rear seats, or  
the convertible top stowage area while raising or  
lowering the convertible top.  
2
The recommended replacement battery is CR2032.  
1. Push the mechanical key release button and release  
the mechanical key to access the battery case screw  
located on the side of the key fob.  
When using the power top button on key fob, if  
potential danger exists while lowering the top,  
release the button immediately to interrupt the  
operation.  
To Lock The Doors, Liftgate, And Charge Port  
Door  
Push and release the lock button on the key fob to lock  
all doors, liftgate, and charge port door. The turn signal  
lights will flash and the horn will chirp to acknowledge  
the signal.  
Programming Additional Key Fobs  
Refer to “Sentry Key” in this section for further infor-  
mation.  
Mechanical Key Release Button  
If you do not have a programmed key fob, contact your  
authorized dealer for details.  
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE  
2. Rotate the screw located on the side of the key fob  
using a small screwdriver.  
Battery Case Removed  
4. Reinstall the battery case inside the key fob and turn  
the screw to lock it into place.  
Key Fob Screw Location  
3. Take out the battery case. Remove and replace the  
battery observing its polarity.  
General Information  
The following regulatory statement applies to all Radio  
Frequency (RF) devices equipped in this vehicle:  
This device complies with Part 15 of the FCC Rules and  
with Industry Canada license-exempt RSS standard(s).  
Operation is subject to the following two conditions:  
1. This device may not cause harmful interference, and  
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17  
2. This device must accept any interference received,  
including interference that may cause undesired  
operation.  
2
NOTE: Changes or modifications not expressly ap-  
proved by the party responsible for compliance could  
void the user’s authority to operate the equipment.  
DOOR LOCKS  
The door locks can be manually locked or unlocked  
from inside the vehicle by using the door handle. If the  
door handle is pushed a red lock indicator will show on  
the door handle (indicating locked) when the door is  
closed, the door will lock.  
Driver’s Door Lock Handle  
WARNING!  
Do not leave children or animals inside parked  
vehicles in hot weather. Interior heat build-up  
may cause serious injury or death.  
For personal security and safety in the event of a  
collision, lock the vehicle doors as you drive as  
well as when you park and leave the vehicle.  
Before exiting a vehicle, always shift the auto-  
matic transmission into PARK or the manual  
transmission into FIRST gear or REVERSE, apply  
(Continued)