KNOWING THE INSTRUMENT PANEL for Your Fiat 500 SUV Second Generation (2020-2025)

KNOWING THE INSTRUMENT PANEL  
This section of the handbook provides  
INSTRUMENT PANEL  
FEATURES.................................. 75  
all information that is useful for getting  
to know, interpreting, and using the  
instrument panel correctly.  
DISPLAY..................................... 76  
WARNING LIGHTS AND  
MESSAGES ................................ 84  
74  
INSTRUMENT PANEL FEATURES  
B
A
B
A
D
C
89  
F0S1070  
A. Warning lights B. Engaged gear, seat belt status, driver assistance status, active safety systems, driving mode notification  
area C. Speedometer D. Multi-function dial indicator: speedometer and driver assistance system indication  
75  
DISPLAY  
MAIN SCREEN  
N
O
E
M
A
B
D
OFF  
L
L
C
I
G
D
F
H
90  
F0S1071  
The main screen fig. 90 shows the following information:  
A. Driving assistance and active safety system notifications B. High-voltage battery charge level and range C. Failure icons D.  
External temperature E. Multifunctional dial indicator and driving assistance system notifications F. Compass (where provided)  
G. Speedometer H. Odometer I. Amber notification or failure indication icons L. Energy management M. Gear engaged  
notifications, headlight alignment and SBR (Seat Belt Reminder) N. TSR and ISA system indication (where provided) O. Cruise  
Control / Adaptive Cruise Control / Speed Limiter / Intelligent Speed Assist target speed setting (where provided)  
76  
B - High-voltage battery charge  
state of charge and range  
settings) and an indicator that indicates  
any changes in expected range:  
by means of an up arrow and  
a blue bar if the current driving style  
increases the range;  
by means of a down arrow and  
a red bar if the current driving style  
decreases the range.  
A - Driving assistance and active  
safety system notifications  
This position displays the status  
icons of the various functions (where  
provided), such as ACC (Adaptive  
Cruise Control), AEB Control  
(Autonomous Emergency Brake  
Control) or Lane Control, active safety  
systems, such as ESC (Electronic  
Stability Control), TSR (Traffic Sign  
Recognition) and ISA (Intelligent Speed  
Assist) and thumbnails of the driving aid  
systems.  
A
B
In case the driving style does not  
change the range, no graphic signals  
are displayed.  
C - Failure icons  
91  
F0S1072  
All failure icons are displayed in this  
position. In case of multiple failures, the  
display will be in succession.  
D - External temperature  
The external temperature is displayed  
in °C or °F depending on the display  
settings.  
Refer to the "Starting and Driving"  
section for more information about  
driving assistance systems.  
In this position the state of charge of  
the high-voltage battery is indicated  
by a percentage and a vertical bar  
of height proportional to the state of  
charge of the battery (A) fig. 91. Both  
indications are coloured according to  
the state of charge:  
Refer to the "Safety" section for more  
information about active safety devices.  
range greater than 24 km: blue  
range between 24 km and 16 km:  
yellow  
range lower than 16 km: red  
When charging via a power socket,  
the vertical bar is coloured green and  
the symbols and  
(B) fig. 91  
appear. The height of the vertical bar is  
proportional to the state of charge of  
the battery.  
The estimated remaining range is  
indicated by a numerical value (in km  
or miles, depending on the display  
77  
E - Multifunctional dial indicator  
and driving assistance system  
notifications  
H - Odometer  
B
Kilometres or miles travelled  
(depending on the display settings) are  
displayed in position (H) fig. 90.  
I - Amber notification or failure  
indication icons  
A
B
The amber notification icons (e.g. brake  
pedal pressure request) or failure signal  
icons are displayed in succession (in  
case of several notifications) in position  
(I) fig. 90.  
A
C
70  
km/h  
km/h  
93  
F0S1075  
L - Energy management  
Pressing and releasing the controls on  
the steering wheel will open  
Through the display customisation  
functions (see "Settings" paragraph),  
the energy management can be  
displayed on the graduated scale (L)  
fig. 90:  
92  
F0S1074  
/
an alternative display that indicates the  
driving mode instead of speed. The  
driving style is indicated in real-time by  
a cursor that can be positioned in the  
following areas (see fig. 93):  
The fig. 92 shows the current speed  
and (B) whether one of the speed  
control systems (Cruise Control,  
Adaptive Cruise Control, Traffic Sign  
Recognition and Intelligent Speed  
Assist) is active. The round bar (A) also  
provides visual signals for particular  
states of the selected speed control  
system. Refer to the "Starting and  
Driving" section for more information  
about driving assistance systems.  
"POWER": the left side of the  
indicator turns orange in proportion to  
the power required by the electric  
motor.  
"CHARGE": the right side of the  
indicator turns turquoise in proportion  
to the amount of regeneration of the  
high-voltage battery.  
(A) "CHARGE": regeneration mode.  
(B) "ECO": energy-saving driving.  
(C) "POWER": more energy-efficient  
performance driving.  
F - "Compass (where provided)  
For versions with Uconnect™ system  
with integrated navigator, in position (F)  
fig. 90 the direction the car is travelling  
in is shown in real-time.  
"ECO": the indicator turns orange  
and turquoise to indicate energy-saving  
driving.  
G - Speedometer  
M - Gear engaged notifications,  
headlight alignment and SBR (Seat  
Belt Reminder)  
In position (M) fig. 90 the following  
information is displayed:  
driving mode ("NORMAL", "RANGE",  
The instantaneous speed of the car  
(in km/h or mph) is displayed in this  
position, which can also be displayed  
at the top of the display.  
78  
In the centre zone: odometer (default  
setting), Audio information (where  
provided), Phone information (where  
provided), time, external temperature,  
date, compass (where provided) and  
car speed repetition (where provided).  
On the right side: time (default setting),  
odometer, external temperature, date,  
compass (where provided), car status  
(ON, OFF, RUN).  
OK: Press the button to interact with  
the screens. Press the button once  
to confirm your selection. Hold the  
button pressed for 1 second to reset  
the displayed/selected functions.  
"SHERPA");  
gear engaged (D, N, R, P);  
headlight alignment;  
electrical system readiness at start-  
up ("READY") warning;  
SBR (Seat Belt Reminder) system  
notifications. Refer to the “SBR system”  
chapter in the “Safety” section for more  
information.  
N - TSR and ISA system indication  
(where provided)  
Traffic Signal Recognition (TSR) speed  
limit alerts set on the Intelligent Speed  
Assist (ISA) system are shown in  
position (N) fig. 90.  
O - Cruise Control / Adaptive  
Cruise Control / Speed Limiter  
/ Intelligent Speed Assist target  
speed setting (where provided)  
The desired speed signal, set on Cruise  
Control, Adaptive Cruise Control,  
Speed Limiter and Intelligent Speed  
Assist systems is displayed in position  
(O) fig. 90.  
DISPLAY SCREENS  
You can navigate through the following  
main and detail screens using the  
controls on the left side of the steering  
wheel:  
CONTROL BUTTONS  
These are located on the left side of the  
steering wheel fig. 94.  
List of screen pages  
Main screen  
By pressing and releasing  
/
They can be used to scroll through the  
display screens.  
the user can choose to display:  
the multifunction dial indicator  
showing the speed of the car  
or:  
the use of motor power or the  
state of charge of the high-voltage  
battery  
/
Trip A/B  
Press and release  
Trip A  
Trip B  
/
:
Notifications bar  
94  
F0S1139  
The lower part of the display is  
reconfigurable via the display menu.  
The following information can be  
displayed on the left hand side: external  
temperature (default setting), time,  
date, compass (where provided) and  
car speed repeat (where provided).  
Driver assist  
/
: Press and release the  
buttons to access the main menu and  
to scroll the menu and the submenus  
rightwards or leftwards.  
Vehicle info  
Press and release  
Tyre pressure  
/
:
After selecting the desired screen,  
button to access  
Service (scheduled servicing)  
press the  
any detail screens.  
or  
79  
following driving aid systems in area (A)  
fig. 96:  
Audio repeat  
CC (Cruise Control)  
Phone repeat  
Co-Driver with Follow to Stop or Co-  
Driver with Stop&Go;  
Lane Control;  
TSR (Traffic Sign Recognition);  
ISA (Intelligent Speed Assist).  
As more recent notifications are shown,  
previous notifications are overwritten.  
Repeat navigation  
Recorded messages  
/
Tutorials  
Settings  
95  
F0S1077  
The screen can be used to show the  
following items: "Current consumption",  
"Average consumption", "Distance",  
"Average speed", "Travel time".  
The sizes are displayed in "km"/"mi"  
and "km/h"/"mph" depending on the  
display settings.  
In the case of multiple screens,  
indicates the presence of screens  
to the right and/or left of those  
displayed. It is possible to navigate  
between the pages by pressing  
the  
the page.  
/
arrows or the dots on  
Both values can be reset: press and  
hold down the OK button on the  
steering wheel.  
96  
F0S1078  
Trip computer  
The "Trip computer" screen (fig. 95)  
can be used to view several  
parameters relating to the operational  
status of the car. This function has  
two separate memories, "Trip A" and  
"Trip B", where the data for the car's  
"complete journeys" (trips) is recorded  
independently from each other.  
NOTE The total consumption cannot  
be reset.  
For some driving assistance devices,  
pop-up warnings are marked in yellow  
or red at the bottom of the screen  
depending on the type of warning (B)  
fig. 97.  
The instantaneous consumption  
bar can take the following colours  
depending on energy consumption:  
Orange: very high consumption;  
Yellow: high consumption;  
Light green: low consumption;  
Dark green: very low consumption.  
Press the  
from "Trip A" to "Trip B" and vice versa.  
or  
button to switch  
Driver assist  
The screen shows messages and  
visual indication of the status of the  
80  
Phone repeat  
(where provided)  
Repeat navigation  
(where provided)  
This screen repeats the information  
displayed on the Uconnect™ system  
while interacting with a paired phone  
(see example screen in fig. 98). The  
following information is shown:  
Call status;  
This screen repeats the instructions  
provided by the Uconnect™ system  
navigator. The display can be  
pictogram or map.  
Refer to the "Multimedia" section for  
more information.  
connected phone status (battery  
state of charge, network reception,  
incoming/outgoing call notification,  
received text messages notification);  
recent call list.  
Recorded messages  
97  
F0S1266  
This screen displays the recorded  
messages and pop-ups previously  
displayed by the user (fig. 99).  
(A) Symbol (where provided)  
(B) Message  
Refer to the "Starting and Driving"  
section for more information about  
driving assistance systems.  
The system stores the last 10  
received messages marked "read"  
or "unread". The user can select the  
desired message using the steering  
Vehicle info  
The screen shows the following  
information:  
wheel controls  
/
and open it by  
%
Tyre pressure  
Service (scheduled servicing)  
pressing the OK button on the steering  
wheel.  
Press the  
or  
button to switch  
between the "Tyre pressure" screen  
and the "Service" screen.  
Audio repeat  
(where provided)  
99  
F0S1085  
This screen repeats the audio playback  
information shown on the Uconnect™  
system:  
Tutorials  
The Tutorials function is available on  
the car to obtain essential information  
on some of its features. The Tutorials  
also provides tips in the form of pop-  
ups shown on the instrument panel  
display during the journey.  
FM/DAB radio;  
Media (USB, Bluetooth®);  
Android Auto, Apple CarPlay, Baidu  
Carlife.  
98  
F0S1083  
Refer to the "Multimedia" section for  
more information.  
Refer to the "Multimedia" section for  
more information.  
81  
Screen settings: Setting the  
displays at the top of the display.  
Electric vehicle settings:  
"READY" pop-up display,  
power/recharge indicator display,  
motor start tones.  
"User's Guide" display:  
enable/disable.  
Language: this sets the display  
language.  
Screen brightness (on 8 levels).  
Automatic Trip B reset:  
enable/disable.  
Phone Repeat: enable/disable.  
Repeat navigation: map/  
pictograms/disable.  
Brakes  
Hold'n Go: enable/disable.  
By selecting the corresponding  
icon  
in the instrument panel menu, you can  
access an environment where the user  
will be able to:  
Brake maintenance: electric  
parking brake release.  
Auto Park Brake: enable/disable  
electric parking brake automatic  
engagement.  
activate/deactivate the display  
suggestions; the activation/deactivation  
is done by ticking the item  
corresponding to the type of  
suggestions you want to receive from  
the system;  
view stored suggestions: selecting  
this item will allow you to view the  
suggestions previously proposed to the  
user while driving;  
view in-depth information (not  
available with the car in motion):  
through this menu you will be able to  
consult the in-depth information on the  
functions available on board.  
Safety and Assistance  
Acoustic alert volume: off, low  
level, medium level, high level.  
Lane Control alert volume: early,  
medium, delayed.  
Lane Control strength: low,  
medium, high.  
Intelligent Speed Limiter:  
confirmation, automatic.  
Traffic Sign Assist: enable,  
disable.  
Traffic Sign Assist alert: off,  
visual, visual and acoustic.  
New speed limit zone detection:  
off, visual, visual and acoustic.  
Autonomous Emergency Brake  
Control (AEB): off/active braking  
only (where provided)/active  
braking with alert (where  
provided).  
Units of measurement: metric/  
imperial.  
Customisable sizes: Speed, Distance,  
Consumption, Pressure, Temperature.  
Date and Time  
Settings  
This screen allows the user to  
customize the information and  
notifications on the display and the  
various functions of the car.  
Time adjustment.  
Format adjustment: 12  
hours/24 hours.  
Date setting.  
NOTE The tachograph components are  
illustrated below. The menus may vary  
depending on the equipment of the car.  
NOTE Some settings may be managed  
using the Uconnect™ system (see  
"Settings" in the "Vehicle mode"  
paragraph in the "Multimedia" section).  
Display  
Safety  
Passenger airbag:  
enable/disable.  
Speed alarm: volume  
adjustment.  
SBR (Seat Belt Reminder):  
enable/disable.  
Autonomous Emergency  
Brake Control (AEB) sensitivity:  
near/medium/far.  
Park Assist: acoustic, acoustic  
and visual.  
82  
Volume Rear Park Assist: near,  
medium, far.  
Attention Assist warning:  
enable, disable.  
Activate programming: yes, no.  
Power level setting: 1 to 5.  
Start pairing process: start the  
procedure.  
Mirrors and windscreen wipers  
Rain sensor: enable, disable.  
Lights  
Engine shutdown procedure: start  
the procedure.  
Dipped beam sensitivity: 1 to 3.  
Follow me Home: 0, 30, 60, 90  
seconds.  
Automatic main beam: enable,  
disable.  
DRL (Daytime Running Lights):  
enable, disable.  
Cornering lights: enable,  
disable.  
Dipped beam auto power off:  
enable, disable.  
Doors & Locks  
Automatic locking: enable,  
disable.  
Automatic unlock on exit:  
enable, disable.  
Dipped beam when closing:  
enable/disable.  
Remote door unlocking: all  
doors, driver doors.  
Passive Entry: enable, disable.  
Scheduled charging  
Programming settings: list of  
days of the week.  
Passive Entry: list of days of the  
week.  
83  
WARNING LIGHTS AND MESSAGES  
GENERAL WARNINGS  
WARNING Warning lights may be accompanied by a specific message and/or sound when implemented on the instrument  
panel. These indications are indicative and precautionary and as such must not be considered as exhaustive and/or alternative  
to the information contained in the Owner Handbook, which you are advised to read carefully in all cases. Always refer to the  
information in this section in the event of a failure indication.  
WARNING The failure indicators appearing on the display are divided into two categories: very serious and less serious failures.  
Serious faults are indicated by a repeated and prolonged warning "cycle". Less serious faults are indicated by a warning "cycle"  
with a shorter duration. The instrument panel warning light will stay on until the cause of the malfunction is eliminated.  
84  
WARNING LIGHTS ON INSTRUMENT PANEL  
Red warning lights  
Warning light  
What it means  
SEAT BELTS REMINDER  
The warning light switches on constantly with the car stationary and the driver's side or passenger  
side seat belt (when the passenger is present) not fastened.  
The warning light will flash and a buzzer will sound if the car is in motion and the front seat belts are  
not correctly fastened.  
For permanent deactivation of the acoustic signal (buzzer) of the SBR (Seat Belt Reminder) system  
contact a Fiat Dealership. The system can be reactivated at any time using the Setup Menu.  
AIRBAG FAILURE  
The warning light switches on when the ignition device is brought to the ENGINE position, but it  
should switch off after a few seconds.  
The warning light stays on constantly if there is a fault in the airbag system.  
45) 46)  
ELECTRIC PARKING BRAKE FAILURE / LOW BRAKE FLUID / ELECTRIC PARKING BRAKE  
APPLIED  
The warning lights switch on when the ignition device is brought to the ENGINE position, but it  
should switch off after a few seconds.  
Electric parking brake failure  
The warning light flashes in conjunction with the yellow symbol  
fails.  
Contact a Fiat Dealership as soon as possible.  
when the electric parking brake  
Low brake fluid level  
The warning light flashes together with the yellow symbol  
reservoir falls below the minimum level, possibly due to leaks in the circuit.  
when the level of the brake fluid in the  
47)  
85  
Warning light  
What it means  
Electric parking brake on  
The warning light switches on when the electric parking brake is engaged.  
On certain versions, if the car is moving the acoustic warning will also sound.  
IMPORTANT If the warning light turns on while driving, check that the electric parking brake is not  
engaged.  
ELECTRIC POWER STEERING FAILURE  
The warning light switches on when the ignition device is brought to the ENGINE position, but it  
should switch off after a few seconds.  
If the warning light remains on, the power steering may have no effect and the effort required to  
operate the steering wheel may increase significantly even though it is possible to steer the car. In  
this case, contact a Fiat Dealership.  
If the warning light comes on while driving you may not have steering assistance. Although it will still  
be possible to steer the vehicle, the effort needed to operate the steering wheel could be increased:  
contact a Fiat Dealership as soon as possible.  
WARNING In some circumstances, factors independent of the electric power steering could cause  
the warning light on the instrument panel to switch on. In this case, stop the car immediately (if you  
are moving), stop the motor for about 20 seconds (taking the ignition device to the STOP position)  
and then restart the motor ("READY" status). If the warning light stays on, contact a Fiat Dealership.  
WARNING The steering must be initialised after disconnecting the 12V battery. The warning light  
turns on to indicate this. To carry out this procedure, slowly turn the steering wheel all the way from  
one end to the other or drive in a straight line for about a hundred metres.  
Amber warning lights  
Warning light  
What it means  
ESC SYSTEM  
The warning light switches on when the ignition device is brought to the ENGINE position, but it  
should switch off after a few seconds.  
ESC system activation  
Flashing of the warning light while driving indicates the intervention of the ESC system.  
ESC system failure  
If the warning light does not go out or remains on whilst driving, go to a Fiat Dealership.  
86  
Warning light  
What it means  
Hill Holder failure  
The warning light turns on to indicate a Hill Holder system failure.  
In this case, contact a Fiat Dealership as soon as possible.  
PARTIAL / TOTAL DEACTIVATION OF ACTIVE SAFETY SYSTEMS  
The turning on of the warning light indicates that some safety systems have been partially  
deactivated by a driver's request.  
REAR FOG LIGHT  
The warning light switches on when the rear fog light is turned on.  
ABS FAILURE  
The warning light switches on when the ignition device is brought to the ENGINE position, but it  
should switch off after a few seconds. The warning light will light up when the system is either  
not working or not available. In this case the braking system maintains its efficiency unaltered but  
without the advantage of the ABS system.  
Drive carefully and contact a Fiat Dealership as soon as possible.  
iTPMS  
(where provided)  
Low tyre pressure  
The warning light switches on constantly to indicate that the tyre pressure is lower than the  
recommended value, in order to guarantee long tyre life and optical electrical energy consumption,  
or to indicate a slow loss of pressure.  
In this way the iTPMS warns the driver that one or more tyres may be flat and probably punctured.  
In this case it is advisable to restore the correct pressure value. Once the normal operating  
conditions of the car are restored, carry out the Tyre reset procedure.  
WARNING Do not continue driving with one or more flat tyres as handling of the car may be  
compromised. Stop the car, avoiding sharp braking and steering.  
87  
Warning light  
What it means  
iTPMS failure/iTPMS temporarily deactivated  
The warning light flashes for about 75 seconds and then stays on constantly to indicate that the  
system is temporarily deactivated or faulty. The system goes back to normal operation when the  
operating conditions allow it. If this is not the case, carry out the Tyre reset procedure after restoring  
the normal operating conditions.  
If the malfunction warning persists, contact a Fiat Dealership as soon as possible.  
48) 49)  
Green Telltale Indicator Lights  
Warning light  
What it means  
SIDE LIGHTS AND DIPPED BEAM HEADLIGHTS/FOLLOW ME HOME  
Side/tail lights and dipped beam headlights  
The warning light switches on when the side/tail lights or dipped headlights are turned on.  
Follow Me Home  
The light comes on when the Follow Me Home device is in use.  
LEFT DIRECTION INDICATOR  
The warning light turns on when the direction indicator control stalk is moved downwards or,  
together with the right indicator, when the hazard warning light button is pressed.  
RIGHT DIRECTION INDICATOR  
The warning light turns on when the direction indicator control stalk is moved upwards or, together  
with the left indicator, when the hazard warning light button is pressed.  
AUTOMATIC MAIN BEAM HEADLIGHTS  
This warning light comes on when the automatic main beam headlights are activated.  
88  
Blue warning lights  
Warning light  
What it means  
MAIN BEAM HEADLIGHTS  
The warning light switches on when the main beam headlights are turned on.  
Warning  
What it means  
DISPLAY FAILURE  
In the event of an instrument panel display failure, all of the warning lights flash.  
All warning lights flashing  
Message to have the warning light  
checked  
CONTROL SYSTEM WARNING LIGHT FAILURE  
A control system warning light failure is indicated by a message on the instrument panel display.  
IMPORTANT  
45) If the  
warning light does not switch on or stays on whilst driving when the ignition device is turned to ENGINE, a failure may have  
occurred in the restraint systems. In this case the airbags or pretensioners may not be deployed in an impact or, in a lower number of cases,  
they may be deployed accidentally. Before continuing, contact a Fiat Dealership to have the system checked immediately.  
46) A failure of the warning light  
is indicated by the  
symbol appearing on the display or by the  
warning light blinking, depending on  
the version. In this case, the  
warning light may not indicate a possible problem with the airbag restraint system. Before continuing, contact  
a Fiat Dealership immediately to have the system checked.  
47) If the warning light comes on while driving, stop the car immediately and contact a Fiat Dealership.  
48) If the system signals a pressure drop on a specific tyre, it is recommended to check the pressure on all four tyres. The iTPMS does not  
relieve the driver from the obligation to check the tyre pressure every month; it is not to be considered a system to replace servicing or a safety  
system. Tyre pressure must be checked with tyres cold. Should it become necessary for whatever reason to check pressure with warm tyres,  
do not reduce pressure even though it is higher than the prescribed value, but repeat the check when tyres are cold.  
49) The iTPMS cannot indicate sudden tyre pressure drops (for example when a tyre bursts). In this case, stop the car, braking with caution  
and avoiding abrupt steering. The system only warns that the tyre pressure is low: it is not able to inflate them. Insufficient tyre inflation  
increases electrical energy consumption, reduces the tread duration and may affect your ability to drive safely.  
89  
INSTRUMENT PANEL WARNING SYMBOLS  
Red Symbols  
Symbol  
What it means  
DOORS/BONNET/BOOT OPEN  
On some versions, the symbols on the display appear when one or more doors, the tailgate or the  
bonnet are not closed properly. An acoustic warning is also emitted with the doors open and the  
car in motion.  
DOOR FAILURE  
The symbol switches on in the failure to the front door locking system. Contact a Fiat Dealership.  
AIRBAG FAILURE  
The warning light switches on when the ignition device is brought to the ENGINE position, but it  
should switch off after a few seconds.  
The warning light stays on constantly if there is a fault in the airbag system.  
45) 51)  
CAR CHARGING PROCEDURE FAILURE  
This symbol is shown on the instrument panel display, with the car stationary, in the case of a fault  
during the high-voltage battery charging procedure.  
failures in the charging system, in this case disconnect and then reconnect the charging cable  
to the charging port or, in the case of charging at a public charging station, look for another power  
supply point. If the symbol remains on, contact a Fiat Dealership.  
failures in the public charging station (because it may have been deactivated or there may  
be a failure). We recommend that you try charging your car at another public charging station. If the  
symbol remains on, contact a Fiat Dealership.  
HIGH-VOLTAGE BATTERY FAILURE  
The symbol appears on the instrument panel display in case of high-voltage battery failure. Contact  
a Fiat Dealership.  
90  
Symbol  
What it means  
LOW HIGH-VOLTAGE BATTERY CHARGE  
The symbol appears on the instrument panel display in case of state of charge of the high-voltage  
battery. Contact a Fiat Dealership.  
12V BATTERY CHARGING CONDITIONS / DC-DC CONVERTER FAILURE / LOGISTICS MODE  
ACTIVATED / POWER SUPPLY MODE  
The symbol lights up if the 12V battery and/or DC-DC converter fails to charge. Contact a Fiat  
Dealership.  
ELECTRIC SYSTEM FAILURE  
The symbol appears on display of the instrument panel in case of electrical system failure. Contact a  
Fiat Dealership.  
PERFORMANCE LIMITATION  
The symbol is shown on the instrument panel display if the acceleration of the car is limited due  
to a reduction in electric motor performance. If the symbol remains on while driving, contact a Fiat  
Dealership.  
The heated seats will be switched off, if they are on. To switch them back on, press button again.  
NOTE If the automatic climate control system is turned on, it will be turned off automatically.  
ATTENTION ASSIST SYSTEM INTERVENTION  
The symbol appears on display of the instrument panel if the Attention Assist system is activated.  
The system, after estimating the driver’s drowsiness level, through specific events, suggests to the  
driver to stop for a break, because continuing driving is risky. Stop to pause while driving, pulling  
the car over in safe conditions.  
EU eCall SYSTEM FAILURE  
The symbol appears to indicate a failure in the EU eCall system. In this case, an emergency call  
cannot be made. Go to a Fiat Dealership as soon as possible to have the system repaired.  
EU eCall SYSTEM BATTERY FAILURE  
The symbol appears to indicate a failure of the EU eCall system battery or a low battery charge.  
In the first case, it will not be possible to make the emergency call, while in the second case the  
data transmission or connection may be subject to limitations. Go to a Fiat Dealership as soon as  
possible to have the system repaired.  
91  
Symbol  
What it means  
TRANSMISSION FAILURE  
The warning light switches on when the ignition device is brought to the ENGINE position but it  
should switch off after a few seconds.  
The warning light flashes, along with an acoustic warning, to indicate a transmission failure.  
Amber symbols  
Symbol  
What it means  
EXTERNAL LIGHTS FAILURE  
The symbol switches on to indicate a failure on the following lights: daytime running lights (DRLs);  
parking lights; side/tail lights; direction indicators; rear fog light; reversing light; number plate lights;  
stop lights.  
The anomaly may be caused by a blown bulb, a blown protection fuse or an interruption of the  
electrical connection.  
BRAKE FAILURE  
The symbol illuminates together with the red warning light  
failure or low brake fluid level.  
Contact a Fiat Dealership as soon as possible.  
flashing in the event of a brake system  
ELECTRIC PARKING BRAKE FAILURE  
The symbol comes on in case of an electric parking brake failure.  
Contact a Fiat Dealership as soon as possible.  
PARKING SENSOR FAILURE  
(where provided)  
The symbol appears on the display if there is a fault in the parking sensors.  
RAIN SENSOR FAILURE  
The symbol switches on in the case of failure of the rain sensor. Contact a Fiat Dealership as soon  
as possible.  
AUTOMATIC MAIN BEAM HEADLIGHTS FAILURE  
The symbol switches on to report a failure of the automatic main beam headlights. Contact a Fiat  
Dealership as soon as possible.  
92  
Symbol  
What it means  
TRAFFIC SIGN RECOGNITION SYSTEM FAILURE (where provided)  
The symbol comes on in the event of a Traffic Sign Recognition system failure.  
Contact a Fiat Dealership as soon as possible.  
TRAFFIC SIGN RECOGNITION SYSTEM OFF (where provided)  
The symbol comes on if the Traffic Sign Recognition system is off.  
AUTONOMOUS EMERGENCY BRAKE CONTROL (AEB) SYSTEM DEACTIVATION  
The symbol switches on if the Autonomous Emergency Brake Control (AEB) system has been  
deactivated or if the system is obstructed/dirty/unavailable.  
BLIND SPOT ASSIST FAILURE  
The symbol appears in the event of a Blind Spot Assist device failure. Contact a Fiat Dealership as  
soon as possible to have the failure eliminated.  
LANE CONTROL SYSTEM FAILURE  
The symbol appears in case of Lane Control system failure. Contact a Fiat Dealership as soon as  
possible to have the failure eliminated.  
LANE CONTROL SYSTEM DEACTIVATION  
The symbol switches on if the Lane Control system is deactivated.  
POSSIBLE ICE ON ROAD  
The symbol turns on when the external temperature falls to or below 3°C.  
WARNING In the event of external temperature sensor failure, the digits that indicate the value are  
replaced by dashes.  
FIAT CODE SYSTEM FAILURE  
The symbol switches on to indicate a failure of the Fiat CODE system. Contact a Fiat Dealership as  
soon as possible.  
BREAK-IN ATTEMPT  
The symbol switches on when the ignition device is moved to the ENGINE position to report about a  
possible break-in attempt detected by the alarm system.  
93  
Symbol  
What it means  
ATTENTION ASSIST SYSTEM FAILURE  
The symbol appears in the event of an Attention Assist device failure. Contact a Fiat Dealership as  
soon as possible to have the failure eliminated.  
SOUND SYSTEM FAILURE  
The symbol switches on to report a failure of the sound system.  
INTELLIGENT SPEED ASSIST / SPEED LIMITER FAILURE  
The symbol switches on in the case of failure of the Intelligent Speed Assist or of the Speed Limiter  
device. Contact a Fiat Dealership as soon as possible to have the failure eliminated.  
ADAPTIVE CRUISE CONTROL (ACC) FAILURE  
(where provided)  
The symbol lights up to indicate a failure of the Adaptive Cruise Control (ACC) failure.  
Contact a Fiat Dealership.  
AUTONOMOUS EMERGENCY BRAKE CONTROL (AEB) SYSTEM FAILURE  
The warning light switches on to alert the driver that the Autonomous Emergency Brake Control  
(AEB) system is not active due to sensor failure. Contact a Fiat Dealership.  
KEYLESS ENTER-N-GO SYSTEM FAILURE  
The symbol switches on in the event of Keyless Enter-N-Go system failure.  
HIGH-VOLTAGE BATTERY DISCONNECTED  
The symbol lights up to indicate that the high-voltage battery is disconnected from the system.  
Contact a Fiat Dealership.  
DUSK SENSOR FAILURE  
The symbol switches on in the case of failure of the dusk sensor. Contact a Fiat Dealership as soon  
as possible.  
PRESS THE BRAKE PEDAL  
This symbol turns on to indicate that the brake pedal must be pressed to enable starting.  
94  
Symbol  
What it means  
PEDESTRIAN ACOUSTIC SIGNALLING SYSTEM FAILURE  
This symbol is shown on the instrument panel display in case of failure of the pedestrian acoustic  
warning. Contact a Fiat Dealership.  
LOW WINDSCREEN WASHER LEVEL  
The symbol appears for some seconds to indicate that the level of the windscreen washing fluid is  
low.  
Refill the liquid: to do this, see the "Checking levels" chapter in the "Maintenance and care" section.  
Always use liquid with the features indicated in the "Fluids and lubricants" chapter in the "Technical  
specifications" section.  
Green Symbols  
Symbol  
What it means  
SYSTEM READY  
The symbol switches on to signal that the car is ready to start.  
READY  
CHARGING CABLE CONNECTED  
When this symbol is lit it indicates that the cable is connected to the charging port of the car, not  
that the charging procedure is in progress.  
The lighting of the symbol can also be displayed together with dedicated messages. These  
messages will indicate the connection status to the charging port until fully charged.  
WARNING Starting the engine is not allowed until the charging procedure is complete.  
HOLD 'N' GO  
The symbol lights up when the "Hold 'n' go" function is active (electric parking brake engaged).  
ELECTRONIC CRUISE CONTROL ON  
The symbol comes on when the electric Cruise Control system is on.  
SPEED LIMITER ON  
The symbol comes on when the Speed Limiter is on.  
INTELLIGENT SPEED ASSIST SYSTEM ON  
The symbol comes on when the Intelligent Speed Assist system is on.  
95  
Symbol  
What it means  
ADAPTIVE CRUISE CONTROL ACTIVATION  
The symbol comes on when the Adaptive Cruise Control is on.  
INTELLIGENT ADAPTIVE CRUISE CONTROL ACTIVATION  
The symbol comes on when the Intelligent Adaptive Cruise Control system is on.  
Blue symbols  
Symbol  
What it means  
DRIVING MODES  
The instrument panel display shows the driving mode adopted (NORMAL, RANGE, SHERPA).  
SPEED LIMIT EXCEEDED  
The symbol (in "km/h" or "mph", depending on the display settings) lights up when the speed limit  
defined by the Speed Limiter is exceeded.  
White symbols  
Symbol  
What it means  
HEADLIGHT HEIGHT  
The symbol indicates the height of the dipped beam headlights, set to four levels (0-4) using buttons  
and  
.
ELECTRONIC CRUISE CONTROL READY  
The symbol appears to indicate that the electronic Cruise Control is ready.  
ADAPTIVE CRUISE CONTROL READY  
The symbol appears when the Adaptive Cruise Control is ready.  
96