2020-2025 Fiat 500 SUV MULTIMEDIA User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

MULTIMEDIA for Your Fiat 500 SUV Second Generation (2020-2025)

MULTIMEDIA  
This chapter describes the main  
features of the APP FIAT - Link & Drive  
and Uconnect™ 10.25" infotainment  
systems.  
FIAT - LINK & DRIVE APP............ 270  
TIPS INFORMATION AND  
GENERAL INFORMATION ........... 277  
UConnect 10.25" ....................... 280  
CONNECTED SERVICES -  
UCONNECT SERVICES .............. 318  
OFFICIAL TYPE APPROVALS ...... 322  
269  
you can make and receive calls using  
the “Call” function, easily accessing the  
list of favourite contacts or the address  
book, for even safer, distraction-free  
driving  
the “Media” section you can select  
the music application from the  
suggested ones, such as Deezer or  
Apple Music  
.M3U  
.WPL  
FIAT - LINK & DRIVE  
APP  
(for versions/markets where provided)  
The FIAT Link & Drive system is a FIAT  
application interface that includes  
functions for navigating, playing music  
files, listening to the radio, and making  
phone calls (where provided).  
WARNING It is recommended to load  
only freely accessible music files, with  
supported extensions.  
If the external audio device has other  
formats (e.g. .exe, .cab, .inf, etc.)  
problems might arise during playing of  
tracks.  
Bluetooth®  
with the integrated “Radio” function  
you can listen to your favourite station  
during your trip  
The app connects over  
to your smartphone and allows you to  
access these functions directly in the  
car without taking your eyes off the  
road and control them by touching or  
voice recognition.  
103)  
EXTERNAL AUDIO  
SOURCES  
WARNING Where the function is  
provided, some information may also  
be visible on the instrument panel.  
open the FIAT app and click on  
“switch to LINK & DRIVE”  
accept the terms and conditions  
follow the configuration instructions  
to configure the shortcuts  
Other electronic devices can be used  
on the car. Some of them may cause  
electromagnetic interference however.  
Disconnect these devices if the system  
performance worsens.  
MULTIMEDIA DEVICES:  
SUPPORTED FILES AND  
FORMATS  
The desired source can be selected  
using the source selection button of the  
controls located behind the steering  
wheel.  
For the USB source (USB flash drive or  
Apple device connected via USB) the  
system can play files with the following  
extensions and formats:  
USB source  
NOTE The system supports only  
FAT16, FAT32, NTFS, HFS+ formatted  
USB devices. The system does not  
support devices with a capacity higher  
than 256 GB.  
After connecting to Link & Drive over  
Bluetooth®  
.MP3 (32-320Kbps)  
.WAV (8/16 bit, 8-48 kHz)  
, you can choose your  
favourite applications to enjoy your  
travels:  
.WMA (5-320Kbps) mono and stereo  
(for versions/markets where provided)  
.AAC (8–96KHz) mono and stereo  
For all sources, the system can also  
play the following Playlist formats:  
.M3S  
The system does not support USB  
hubs connected to the USB port of the  
car. Connect your multimedia device  
directly to the USB port, using the  
specific connection cable for the device  
if necessary.  
using the “NAV” section, you can  
use a navigation app, such as Waze,  
Google Maps or Apple Map to make  
your journey even more convenient  
270  
Smartphone source  
Connecting to Link & Drive over  
WARNING If the Bluetooth®  
connection between mobile phone  
and system is lost, consult the mobile  
phone handbook.  
The USB port located near the  
smartphone stand is preferable for  
charging the smartphone stand and  
does not allow media files to be read.  
®
Bluetooth will allow you to listen to  
music from your smartphone, make  
telephone calls and, by inserting your  
telephone into the dedicated mount  
on the dashboard, use navigation  
programs in a optimal manner.  
The app allows you to browse  
Link & Drive controls  
The volume up/down controls (A)  
A
fig. 267 and  
central tunnel.  
/
are located on the  
information related to the car:  
when the telephone is connected  
®
to Link & Drive over Bluetooth , you  
can see the energy flows while driving,  
listen to music and web radio, manage  
telephone calls and use the navigation  
apps available on your smartphone;  
when the telephone is not connected  
Link & Drive, you can use the app to  
see the data saved when the motor  
was switched off: last location, battery  
charge level and voltage, charging  
schedule of the high-voltage battery,  
trip statistics and car usage data,  
the nearest Fiat Dealerships and a  
dictionary of the on-board warning  
lights.  
268  
F0S1210  
When the motor is off, the Link &  
Drive system remains on for up to 20  
minutes or until the driver's side door is  
opened.  
267  
F0S1197  
You can switch the system back on  
button  
again by pressing the /  
located on the central tunnel.  
In addition, you can use the steering  
wheel controls to manage telephone  
calls, fast forward tracks being played  
by Link & Drive, select the audio  
source, and call up the smartphone  
voice assistant (Google Assistant, Siri,  
etc.).  
WARNING  
103) Some multimedia players may not be  
compatible Link & Drive system. Only use  
devices (e.g. USB flash drives) from safe  
sources on the car. Devices from unknown  
sources could contain software infected  
by viruses which, if installed on the car,  
could increase the vulnerability of the car's  
electric/electronic systems to hacking.  
NOTE After updating the phone  
software, for proper operation, it is  
recommended to remove the phone  
from the list of devices linked to the  
radio, delete the previous system  
pairing also from the list of Bluetooth®  
devices on the phone and make a new  
pairing.  
There is a mount (A) fig. 268 on the  
dashboard for your smartphone;  
always use it in order to interact with  
your smartphone safely.  
104)  
271  
104) Telephone voice commands: not  
all mobile phones are compatible with  
this function. You can obtain further  
information from your mobile phone  
service provider or the user guide for your  
mobile phone. The Manufacturer will the  
voice interface functions, but shall not be  
held liable for the content.  
272  
STEERING WHEEL CONTROLS  
The controls for the main system functions are present on the steering wheel to make control easier.  
269  
F0S1211  
273  
Steering wheel controls summary table  
Button  
Interaction  
Acceptance of incoming call  
Acceptance of the second incoming call and putting the active call on hold  
Long press (greater than 2 seconds): Activates a voice assistant session on the phone paired over Bluetooth® to  
impart voice commands or ends the session if one is in progress.  
Short press (less than 2 seconds): Make another request in the current voice session without starting a new one.  
Rejection of incoming call  
Ending of call in progress  
274  
CONTROLS BEHIND THE STEERING WHEEL  
B
A
270  
F0S1350  
275  
ꢀ
Buttons  
Interaction  
Button A (steering wheel left side)  
Brief button press: select the next song or track.  
Long button press: fast forward the track.  
Upper button  
Each press selects one of the USB and Bluetooth® sources. Only the available  
sources will be selected.  
Central button  
Brief button press: select the previous song or track.  
Long button press: fast rewind the track.  
Lower button  
Button B (steering wheel right side)  
Increasing volume  
Brief button press: single volume increase  
Long button press: fast volume increase  
Upper button  
Central button  
Lower button  
Activation/deactivation of Mute function  
Decreasing volume  
Brief button press: single volume decrease  
Long button press: fast volume decrease  
276  
RECEPTION  
CONDITIONS  
do not use alcohol, petrol and  
derived products to clean the  
display lens and make sure that the  
Uconnect™ system is switched off  
during cleaning;  
prevent any liquid from entering the  
system: this could damage it beyond  
repair.  
TIPS INFORMATION  
AND GENERAL  
INFORMATION  
Reception conditions change  
constantly while driving. Reception may  
be interfered with by the presence  
of mountains, buildings or bridges,  
especially when you are far away from  
the broadcaster.  
PRESENTATION  
The vehicle is equipped with an  
infotainment system designed  
according to the specific characteristics  
of the passenger compartment, with a  
customised design that matches the  
style of the dashboard.  
WARNINGS  
WARNING The volume may be  
adjusted when receiving traffic  
information and news.  
In the event of a fault, the system must  
only be checked and repaired by a Fiat  
Dealership.  
The system is installed in an ergonomic  
position for the driver and passenger  
and controls can be quickly identified  
from the graphics on the front making  
the device easy to use.  
If the temperature is particularly low,  
the display may take a while to reach  
optimum brightness.  
NOTE The DAB frequency can be used  
in countries where digital transmission  
technology is available. The device  
will tuned to any frequency if the DAB  
button is pressed in a country where  
the service is not provided.  
In case of overheating (e.g. excessive  
outside temperature, prolonged  
exposure to sunlight, etc.), the system  
may switch to "protection mode" by  
limiting amplification (maximum volume)  
and even stopping operation until the  
temperature of the radio drops to  
acceptable levels.  
To increase protection against theft,  
the system has a protection system  
which only allows it to be used in the  
car in which it was originally fitted.  
The instructions for use are given  
below and we recommend you read  
them carefully and always keep them  
to hand (for example, in the glove  
compartment).  
CARE AND  
MAINTENANCE  
105) 106)  
Observe the following precautions to  
ensure the system is fully operational:  
avoid hitting the display lens with  
pointed or hard objects that could  
damage its surface;  
clean with a damp cloth (microfibre if  
possible). If necessary, you can use a  
delicate mild soap and water solution,  
then dry with a soft, dry cloth. Do not  
apply pressure to the display lens while  
cleaning;  
Look at the screen only and when it  
is necessary and safe. If you need to  
look at the screen for a long time, pull  
over to a safe place so as not to be  
distracted while driving. Immediately  
stop using the system in the event of  
a fault. Otherwise the system might be  
damaged. Contact a Fiat Dealership as  
soon as possible to have the system  
repaired.  
ROAD SAFETY  
271) 272)  
Learn how to use the varied system  
functions before starting to drive.  
Read the instructions for the system  
carefully before starting to drive.  
277  
MULTIMEDIA DEVICES:  
SUPPORTED AUDIO  
FILES AND FORMATS  
For USB sources the system can play  
files with the following extensions and  
formats:  
WARNING Some multimedia players  
may not be compatible with the  
Uconnect™ system.  
decode AVC video that was encoded  
by a consumer engaged in a personal  
and non-commercial activity and/or  
was obtained from a video provider  
licensed to provide AVC video.  
No license is granted or shall be  
implied for any other use. Additional  
information may be obtained  
Only use devices (e.g. USB flash  
drives) from safe sources on the car.  
Devices from unknown sources could  
contain software infected by viruses  
which, if installed on the car, could  
increase the vulnerability of the car's  
electric/electronic systems to hacking.  
.MP3 (32 – 320Kbps);  
.WAV (Audio PCM, *.wav file  
extension) (8/16 bit, 8-48 kHz);  
.WMA (5-320Kbps) mono and  
stereo, not lossless;  
from MPEG LA, L.L.C. See:  
 
EXTERNAL AUDIO  
SOURCES  
.M4B (8 – 96KHz) mono and stereo;  
.AAC (8 – 96KHz) mono and stereo;  
.M4A (8 – 96KHz) mono and stereo;  
.MP4 (8 – 96KHz) mono and stereo.  
For all sources, the system can also  
play the following Playlist formats:  
.M3U  
NOTES ON TRADEMARKS  
iPod, iTunes and iPhone are registered  
trademarks of Apple Inc.  
Other electronic devices (e.g. PDA,  
etc.) can be used on the car.  
Some of them may cause  
All the other trademarks belong to their  
respective owners.  
electromagnetic interference however.  
Disconnect these devices if the system  
performance worsens.  
Use of "Made for Apple" badge  
means that an accessory has been  
designed to connect specifically to  
the Apple product(s) identified in the  
badge and has been certified by the  
developer to meet Apple performance  
standards. Apple is not responsible for  
the operation of this device and of its  
conformity with the safety rules and  
standards.  
.WPL  
NOTE The system supports only FAT32  
and EX FAT formatted USB devices.  
The system does not support devices  
with a capacity higher than 64 GB.  
NOTE The system does not support  
USB hubs connected to the USB port  
of the car. Connect your multimedia  
device directly to the USB port, using  
the specific connection cable for the  
device if necessary.  
The system can play back, for Apple  
devices and for those that support the  
MTP (Media Transfer Protocol), all file  
and playlist extensions and formats  
supported by the device itself.  
NOTE It makes no difference whether  
the suffixes are written in capital or  
small letters.  
NOTICE  
NOTE It is recommended to load only  
unprotected music files, with supported  
extensions. If the external audio device  
has other formats (e.g. .exe, .cab,  
.inf, etc.) problems might arise during  
playing of tracks.  
(versions with Uconnect™ 7" only)  
This product is licensed under the AVC  
patent portfolio for the personal and  
non-commercial use of a consumer to  
(i) encode video in compliance with the  
AVC standard ("AVC video") and/or (ii)  
ANTI-THEFT  
PROTECTION  
The system is equipped with an  
anti-theft protection system based on  
the exchange of information with the  
278  
to the availability and precision of the  
GPS or by specific environmental  
conditions.  
electronic control unit (Body Computer)  
on the car.  
IMPORTANT  
This guarantees maximum security and  
prevents the system from being used  
on other cars in the event of theft. In  
case of need, contact a Fiat Dealership.  
271) Follow the safety rules below:  
otherwise serious injuries may occur to  
the occupants or the system may be  
damaged.  
272) If the volume is too loud this can  
be dangerous. Adjust the volume so that  
you can still hear background noises (e.g.  
horns, ambulances, police vehicles, etc.).  
When navigation is started for the first  
time, the system may require several  
minutes to determine the GPS position  
and display the current position on the  
map. Afterwards the position will be  
found much more quickly (usually a few  
seconds are needed).  
OFFICIAL TYPE  
APPROVALS  
The system installed on the car  
complies with the 2014/53/EU  
directive, UA.RED.TR, the French SAR  
Decree Law dated 15/11/2019 and  
the UKCA (UK Conformity Assessed)  
Certification dated in force in the United  
Kingdom.  
The presence of big buildings (or similar  
obstacles) may sometimes interfere  
with the GPS signal reception.  
WARNING  
105) Only clean the front panel and the  
display with a soft, clean, dry, anti-static  
cloth. Cleaning and polishing products  
may damage the surface. Do not use  
alcohol or similar products to clean the  
control panel or the display.  
106) Do not use the display as a base for  
supports with suction pads or adhesives  
for external navigators or smartphones or  
similar devices.  
AUDIO SYSTEM  
Basic level audio system  
The basic system consists of:  
2 x front tweeters  
For more information about  
certifications and open  
source lists available for in-car  
components use the following:  
 
2 x front door midwoofers  
HI-FI sound system  
(where provided)  
GPS RECEPTION (Global  
Positioning System)  
(only versions with Navigation system)  
The GPS is a satellite system which  
provides worldwide information  
about time and position. The GPS  
is exclusively controlled by the  
government of the United States of  
America, the only body responsible for  
the availability and accuracy of this  
system.  
The HI-FI sound system consists of 10  
speakers:  
1 x centerfill speaker on dashboard  
2 x front tweeters  
2 x front door midwoofers  
2 x rear door tweeters  
2 x rear door midwoofers  
1 x sub-woofer in the boot  
1 x 12-channel amplifier in the boot  
The operation of this navigation system  
can be influenced by any change made  
279  
UConnect 10.25"  
B
D
C
D
E
F
G
A
271  
F0S2004  
280  
Gꢀ RAPHIC BUTTONS ON DISPLAY (A)  
Graphic button  
Functions  
Mode  
Show main display  
Press graphic button  
Home  
Access Media mode to select available  
sources, folder tracks and interaction with  
audio settings  
Press graphic button  
Press graphic button  
Media  
Climate control system settings (air flow, set  
indoor temperature) and heated seat (where  
provided)  
Comfort  
Access to the Phone mode  
Press graphic button  
Press graphic button  
Phone  
Access to additional car settings and  
functions  
Vehicle  
Start Navigation system  
Press graphic button  
Press graphic button  
Navigator  
(where provided)  
Access the list of available Apps  
App  
You can customise the order of the buttons by holding down the icon to move and dragging it to the desired position.  
NOTE Customisation is only active when the car is stationary. If an attempt is made to customise with the car in motion or to resume driving  
without having completed the operation, a warning message will appear on the display and the operation will be ended.  
281  
Sꢀ TATUS BAR  
Area  
Functions  
Mode  
B/G Comfort (where provided)  
Climate control system display and settings  
Access the list of available Apps  
Press graphic button  
Press graphic button  
C
D
App  
Quick access to functions: Profiles,  
Notifications, External temperature, Voice  
recognition  
Reconfigurable quick button bar  
Press graphic button  
Press graphic button  
Press graphic button  
Display the current time / access the Apps  
list to customise the reconfigurable bar  
E
F
Time / App customisation  
Message area  
Display notifications, audio track playing,  
tuned radio station, call time, volume and  
scrolling messages  
282  
STEERING WHEEL CONTROLS  
The controls for the main system functions are present on the steering wheel to make control easier.  
272  
F0S1211  
Steering wheel controls summary table  
Button  
Interaction  
Acceptance of incoming call  
Acceptance of the second incoming call and putting the active call on hold  
Display on the instrument panel of the list of the last 10 calls and favourite phone numbers (only with call browsing  
enabled)  
283  
Button  
Interaction  
Activation of voice recognition  
Interruption of the voice message in order to give a new voice command  
Interruption of voice recognition  
Interaction with Apple CarPlay and Android Auto  
Rejection of incoming call  
Ending of call in progress  
284  
CONTROLS BEHIND THE STEERING WHEEL  
B
A
273  
F0S1350  
ꢀ
Buttons  
Interaction  
Button A (steering wheel left side)  
Brief button press: search for next radio station or select next track  
Long button press: fast forward the track  
Upper button  
Central button  
Lower button  
®
With each press advances between AM, FM, DAB, USB and Bluetooth  
sources.  
Only the available sources will be selected.  
Brief button press: search for previous radio station or select previous track  
Long button press: fast rewind the track  
285  
Buttons  
Interaction  
Button B (steering wheel right side)  
Increasing volume  
Brief button press: single volume increase  
Long button press: fast volume increase  
Upper button  
Central button  
Lower button  
Mute on/off (mutes the playback of audio tracks, radio stations, streaming from  
App and the ringing of incoming calls)  
Decreasing volume  
Brief button press: single volume decrease  
Long button press: fast volume decrease  
286  
SWITCHING THE SYSTEM  
ON/OFF  
To go back to the previous screen,  
press the "X" (Delete) graphic button or,  
depending on the active screen,  
Versions with Uconnect™ 7"  
To close the pop-up message, press  
(where provided):  
The same operation can be performed  
to move between pages. Press your  
finger on the chosen field or button to  
select the field or perform the function  
associated with the button.  
Hold down button (A) fig. 274 to switch  
the system on/off.  
Briefly press (A) to activate/deactivate  
the Mute function.  
HOT BUTTONS  
Up to 4 hot buttons can be set on the  
status bar.  
"X" or "OK"  
"X" or "Yes"  
"X" or "Delete"  
"X" or "OK" or " Delete” Or, you  
can wait for the pop-up message to  
close automatically or press anywhere  
outside the pop-up.  
VOLUME ADJUSTMENT  
Turn the wheel (B) fig. 274 forward  
to increase the volume or back to  
decrease it.  
Press the button below the time (E) to  
open the drop-down menu with the list  
of available apps. Hold the desired app  
pressed and drag it to the app to be  
replaced on the status bar.  
The pop-up message will not have a  
close button if it was opened from the  
sidebar.  
NOTE Customisation is only active  
when the car is stationary. If an attempt  
is made to customise with the car in  
motion or to resume driving without  
having completed the operation,  
a warning message will appear on  
the display and the operation will be  
ended.  
To go back to the home screen  
or home position press the graphic  
button  
The touchscreen function can be used  
to access and view the available lists of  
music tracks, phone numbers, settings,  
etc.  
274  
F0S1245  
TOUCHSCREEN  
FUNCTION  
The system uses the touchscreen  
function; to interact with the different  
functions, press the graphic buttons  
displayed.  
HOME PAGE  
INDICATIONS ON THE  
DISPLAY  
Top status bar  
Move your finger on the display to  
scroll lists and selections. Hold your  
finger down and move up to display the  
list items at the bottom; move down to  
display the list items at the top.  
Hold your finger down on the display  
and move your finger rightwards, to  
see the lists to the left; move your  
finger leftwards, to see the lists to the  
right of the display.  
The information shown in the status bar  
in the top of the display is as follows:  
climate control system information  
(driver side, where provided) (heated  
seat and steering wheel, driver side  
temperature) (B);  
To confirm the selection, press the  
graphic button "OK" or tick the required  
selection.  
Confirmation of some functions  
or settings is accompanied by a  
dedicated chime.  
287  
have been moved by pressing them  
with a finger and then releasing them.  
"App" graphic button  
access to "App" mode;  
(C): allows  
part which can be"reconfigured" to  
display 3 graphic icons (e.g. avatar,  
outdoor temperature, etc.) (D);  
GPS information, time and graphic  
display for downward scroll through  
Menus (D);  
information/alert message display  
area (F);  
climate control system information  
(passenger side - where provided)  
(heated seat and passenger side  
temperature) (G).  
HOME  
Press the "Home"  
button to access  
the home screen. You can customise  
this screen and can use it to view  
summary pages of Uconnect™  
system functions called “Widgets"  
fig. 275.  
The widgets can be customised and  
button  
rearranged by pressing the  
(see the description in the respective  
paragraph).  
Side status bar  
The status bar at the left side of the  
display (H) contains the following  
graphic buttons:  
Home: go back to home screen  
Media: accesses "Media" mode  
Nav: accesses the “Navigation”  
mode  
275  
F0S2024  
Phone: accesses "Phone" mode  
Comfort: enables interaction  
with operation of the climate control  
system  
Vehicle: accesses "Vehicle"  
mode  
The display order/position of the  
graphic icons may vary depending on  
how the graphic icons on the display  
288  
MEDIA MODE  
A
B
C
D
E
276  
F0S2001  
289  
Middle part: display of information  
about the track being played and  
playback control buttons:  
Press the "Media" graphic button  
to listen and manage your music,  
view the available lists, select your  
preferred audio settings and select your  
sound source of choice from those  
available: Radio AM, FM, DAB, USB,  
Bluetooth®.  
"Bluetooth": opens the list of devices  
®
for a Bluetooth audio source  
®
"Browse" for USB/Bluetooth  
source, allows you to search for  
content on your device  
®
WARNING On some AM band  
frequencies, reception may be  
disturbed by interference on the  
incoming signal to the Uconnect™  
system.  
"Tracks" for USB/Bluetooth  
source, allows you to select a track  
from the playlist  
277  
F0S2008  
TRACK SELECTION  
/
: select previous/next  
The “Tracks” function allows you to  
open a window with the list of tracks  
being played.  
track or previous/next station  
: random playback of the tracks  
contained in the folder;  
: when the last track is finished,  
playback automatically resumes from  
the first track in the playlist;  
: pause track being played  
WARNING Applications used  
on portable devices may be not  
compatible with the Uconnect™  
system.  
The graphic buttons  
and  
(A) fig. 278 can be used to browse  
the list of artists, music genres and  
albums on the connected device via  
®
USB or Bluetooth , according to  
: "Tuning": access the radio  
station selection page  
After Media mode is selected, the  
following information fig. 276 is shown  
on the display (see description below).  
Upper part: Selection of the different  
pages of the "Sources", "Playback",  
"Browse", "Audio settings" function.  
Left part: display of the user's three  
favourite sources. To choose the  
source, select "All sources" and then  
choose the source to display. The  
source being played is shown in red.  
the information recorded on the tracks  
themselves.  
Lower part: Quick access to the  
favourite radio stations.  
“SOURCES" MENU  
This screen allows selection of the  
source to be used to play the radio  
station or multimedia files chosen.  
From this screen, you can customise  
the bar of favourite sources (E) fig. 276  
by dragging the source icons onto the  
bar fig. 277.  
A
278  
F0S2006  
290  
Within each list, the "ABC" graphic  
button allows the user to skip to the  
desired letter in the list.  
"AUDIO SETTINGS"  
MENU  
The “Audio Settings” menu comprises  
the following options (according to the  
version of the car):  
NOTE This button might be disabled for  
some Apple devices.  
B
A
"Balance/Fader" (left/right and  
front/rear audio balance adjustment)  
Equaliser  
Pairing of volume to speed  
Surround Sound  
AutoPlay  
Auto-On Radio  
Radio Off with Door  
Volume adjustment  
“BROWSE” MENU  
With one of the radio sources playing,  
by pressing the "Browse" button  
to search for a station using the "All  
Stations" submenu fig. 279 or save or  
remove a favourite station using the "All  
Presets" submenu fig. 280.  
280  
F0S2051  
In the "All Presets" submenu:  
press "Hold to save" to add the  
current radio station to your favourite  
stations  
press icon (A) fig. 280 to remove a  
radio stored as a favourite  
The number of preset stations which  
can be saved can also be set by  
pressing the “+” or "–", see (B) fig. 280  
graphic buttons.  
In the "All stations" submenu you can  
display the station list in alphabetical  
order using the "ABC" button (A)  
fig. 279 or select the station search  
Balance/Fader  
Press the “Balance/Fader" graphic  
button fig. 281 to balance the audio  
between the front speakers (4 speaker  
version) or between the rear and front  
speakers (6 speaker versions).  
Drag the cursor (A) fig. 281 or use  
the arrows on the arrow to regulate  
the point where most sound is to be  
emitted.  
function using the  
graphic button.  
ABC  
TRACK INFORMATION  
Press the  
button on the display to  
A
show the information on the track that  
is playing. Pressing the button again  
disables the function.  
279  
F0S2052  
TRACKS  
Press the "Tracks" graphic button  
to view a menu along with the list of  
songs.  
The song that is playing is indicated by  
an arrow and lines above and below  
the title.  
291  
from all directions, like being in home  
theatres or cinemas.  
Pairing of volume to speed  
Press the “Pair volume to speed”  
graphic button to display the screen  
for regulating the volume in relation to  
speed.  
A
Adjust the volume according to speed  
by selecting "Off", "1", "2" or "3”  
fig. 283. This allows you to adjust the  
radio volume automatically on the basis  
of car speed.  
281  
F0S2010  
The volume automatically increases  
when the speed does, to compensate  
for the normal noise coming from the  
road.  
NOTE Only left/right balancing is  
possible if the rear speakers are not  
installed.  
284  
F0S2055  
AutoPlay  
Press the “AutoPlay” graphic button  
fig. 285 to activate the automatic  
playback.  
Equaliser  
Press the "Equaliser" graphic button to  
adjust the bass, mid and treble, tones  
fig. 282.  
Then use the "+" or "–" graphic  
buttons, or press and drag the level bar  
to each of the equaliser bands.  
The level value is viewed in the lower  
part of each band.  
283  
F0S2054  
Surround Sound  
(where provided)  
285  
F0S2056  
Press the "On" graphic button fig. 284  
to activate the “Surround Sound"  
function. Press the "Off" graphic button  
to deactivate this function.  
The "AutoPlay" function starts playing  
music as soon as a USB multimedia  
device is connected to the USB port of  
the vehicle (the function is enabled only  
when the motor is on).  
When the “Surround Sound" function  
is enabled, the audio can be heard  
282  
F0S2053  
292  
system to automatically turn off when  
the driver or passenger side door is  
opened, fig. 287.  
Press the "OFF" graphic button to  
deactivate this setting.  
FAVOURITE RADIO  
STATIONS  
When a radio station is playing, you  
can save it as a favourite station and  
recall it later (A) fig. 289.  
Auto-On Radio  
Enables you to enable or disable  
automatic switch-on of Uconnect™  
when the engine is started or to recall  
the last radio station played whether or  
not the radio function was on when the  
car was stopped (fig. 286).  
287  
F0S2058  
Volume adjustment  
289  
F0S2027  
This function can be used to set  
the volume of multimedia contents  
("Media"), phone calls ("Phone"),  
navigation directions ("Navigation") and  
voice commands ("RV").  
To save the station, press and hold  
down the graphic button of one of the  
positions required until a confirmation  
acoustic warning is heard.  
286  
F0S2057  
Move the slider towards "–" or "+" to  
turn volume down or up, fig. 288.  
If a position already occupied by a  
radio station is selected, the station  
currently playing is saved instead of the  
station already in the memory.  
The number of radio stations that can  
be stored can be set by the driver  
using the "Browse" function described  
above.  
On: automatic switch-on of  
Uconnect™ when car is started  
enabled.  
Off: automatic switch-on of  
Uconnect™ when car is started  
disabled.  
2
12  
15  
Recall last status: when the motor is  
started, the Uconnect™ is maintained  
in the same status (on/off) as before the  
last time the car was stopped.  
15  
The complete list of stations saved  
can be recalled using the "All presets"  
graphic button (B) fig. 289.  
Radio Off with Door  
The "Radio Off with Door" feature  
enables/disables the Uconnect™  
288  
F0S2059  
293  
COMFORT MODE  
A
B
C
C
N
E
Comfort  
D
290  
F0S2002  
294  
When a USB device is plug into the  
port on the dashboard with the radio  
on, it starts to play the tracks on the  
device if the "AutoPlay" is set to "ON"  
in the "Audio" menu.  
On the fig. 290 screen you can select:  
the airflow distribution settings:  
windscreen, face, face plus feet, feet  
plus windscreen (A);  
the inside temperature settings (B)  
the defrosting of the windscreen  
“Max”;  
If the "AutoPlay" function is set to OFF  
and a smartphone is connected, only  
charging the device will be active.  
the defrosting of the rear window  
“Rear”  
the heating of the driver/passenger  
seat (C) (where provided);  
the activation of the climate control  
system with maximum cooling (Max  
A/C);  
the activation of the climate control  
system (A/C);  
switch-off of the climate control  
system “Off” (only for automatic climate  
control system);  
291  
F0S1137  
the ventilation level (D);  
activation of the "Auto" automatic  
climate control system (only for  
automatic climate control system);  
the recirculation function (E).  
USB SOURCE  
There are two USB ports inside  
the car. The first one is located on  
the dashboard for data transfer to  
the Uconnect™ system and for  
charging external devices (A) fig. 291;  
the second one is inside the central  
console for charging external devices  
only (B) fig. 292).  
292  
F0S1329  
295  
PHONE MODE  
A
B
C
D
E
293  
F0S2003  
296  
press the “Text messages” graphic  
button (E) fig. 293 to display the  
received text messages  
Press the “Phone” graphic button on  
the display to activate the Phone mode.  
To consult the list of mobile phones  
and functions supported, contact  
Customer Care on the number  
provided in the Warranty or visit the  
 
Select the desired page on the display  
using the bar at the top to:  
view the connected devices  
The mobile phone audio is transmitted  
through the car’s sound system;  
the system automatically mutes the  
Uconnect™ system audio when the  
Phone function is used.  
Pairing a mobile phone  
press the “Keypad” graphic button  
(A) to access the graphic keypad on  
the display, which you can use to dial a  
phone number  
294  
295  
296  
F0S2005  
F0S2012  
F0S2013  
WARNING Carry out this operation  
only with car stationary and in safety  
conditions; this function is deactivated  
when the car is moving.  
NOTE The keypad is only active when  
the car is stationary. If an attempt is  
made to use the keypad with the car in  
motion or if driving is resumed without  
having completed the input, a specific  
warning message will appear on the  
Uconnect™ system display and the  
operation will be ended.  
A
To pair a mobile phone, see the  
procedure in "Pairing a Bluetooth  
audio device" in the “Bluetooth Mode”  
chapter.  
MAKING A PHONE CALL  
The operations described below can  
only be accessed if supported by the  
mobile phone in use.  
press the "Recent” graphic button  
(B) fig. 293 to display and call contacts  
from the recent calls logs  
press the “Favourites” graphic  
button " (C) fig. 293 to display and call  
contacts in the favourites list  
press the “Phonebook” graphic  
button" (D) fig. 293 to display and  
call contacts in the mobile phone  
phonebook  
For all functions available, refer to the  
mobile phone owner's handbook.  
You can make a call by selecting one of  
the following items:  
"Keypad" (A) fig. 294  
"Recent" (A) fig. 295  
"Favourites" (A) fig. 296  
"Contacts"  
297  
You can add a number or a contact (if  
already in Contacts) to the favourite list  
during a call by pressing one of the 5  
"Empty" graphic buttons on the upper  
part of the display.  
To go back to the first call, please refer  
to the description in the paragraph  
"Go from one call to another". To unite  
two calls, please refer to "Uniting two  
phone calls".  
The favourites can also be managed by  
using the Phone Book options.  
Going from one call to another  
If two calls are going on at the same  
time (one active and another on hold),  
press the "Change" button on the main  
screen relative to phone mode.  
You can put only one call on hold at a  
time.  
Put call on hold/go back to a call  
held  
298  
F0S2015  
During an active call, press the "Hold"  
graphic button (A) fig. 297 on the main  
screen relative to the Phone mode.  
TEXT MESSAGES  
You can access the text message  
list received by the cell by selecting  
the "Messages" item (the list shows a  
maximum of 60 received messages).  
You can also press the  
the steering wheel controls to go from  
an active call to one on hold.  
button on  
Uniting two phone calls  
"DO NOT DISTURB"  
FUNCTION  
If two calls are going on at the same  
time (one active and another on hold),  
press the "Unite calls" graphic button  
on the main screen relative to phone  
mode to unite all the calls into a  
conference call.  
If supported by the connected phone,  
by pressing the "Do Not Disturb"  
graphic button the user will not receive  
notifications of incoming calls or text  
messages. The user can reply with a  
default or customized message by  
means of the settings.  
297  
F0S2014  
Transferring a call  
Make a second call when one is  
ongoing  
The ongoing calls can be transferred  
from the mobile phone to the system  
and vice versa without ending the calls.  
To transfer the call, press the "Transfer"  
graphic button (A) fig. 298.  
To use this function, the mobile phone  
must support the text exchange  
You can put a call on hold by pressing  
the "Hold" graphic button on the main  
phone mode screen, then dial the  
number using the graphic dial pad  
or select one from recent calls, from  
received text messages or from the  
phonebook.  
®
function through Bluetooth .  
If this operation is not supported by  
the phone, the corresponding "Text  
message" graphic button is deactivated  
(greyed out).  
298  
is usually available on the phone, in the  
®
Select the "Text Message" (E) fig. 293  
submenu to display the incoming  
messages fig. 299. Press button (A)  
to open them and view them on the  
graphic display.  
TEXT MESSAGE  
OPTIONS  
Bluetooth connections menu for a  
Default SMS messages are stored in  
the system memory and can be sent  
to answer a received message or as  
a new message. The following list of  
available messages is given by way of  
example:  
device registered as Uconnect™.  
After enabling this function on the  
mobile phone, it must be disconnected  
and reconnected with the Uconnect™  
system in order to make it effective.  
You can select one of the following  
actions in the message details window:  
A
Yes  
No  
WARNING Some mobile phones may  
not take the text message delivery  
confirmation settings into account  
when interfacing with the Uconnect™  
system. If a text message is sent via  
the Uconnect™ system, the driver  
could face an additional cost, without  
any warning, due to the text message  
delivery confirmation request sent by  
the phone. For any problems related  
to the above, contact your telephone  
service provider.  
Okay  
I can't talk right now  
Call me  
Thanks  
I'm lost  
I'm on the road  
I am stuck in traffic  
Are you there?  
Where are you?  
I can't talk right now  
I will be 5 (or 10, 15, 20, 25, 30, 45,  
60) (*) minutes late  
299  
F0S2060  
"Read": to read the message aloud  
"Reply": to open the function for  
typing and sending a reply  
"Forward": to forward the message  
to a recipient  
"Call": to call to the sender of the  
message.  
“Incoming": to go back to the  
incoming message screen.  
"DO NOT DISTURB"  
FUNCTION  
(*) Only use the numbers listed,  
otherwise the system will not take  
the message. When receiving a text  
message, the systems also allows the  
same message to be forwarded.  
NOTE For details on how to send a text  
message using the voice commands,  
refer to the dedicated paragraph.  
If supported by the connected phone,  
by pressing the "Do Not Disturb"  
graphic button the user will not receive  
notifications of incoming calls or text  
messages. The user can reply with a  
default or customized message by  
means of the settings.  
On this screen, you can send a text  
message using the "New message"  
function fig. 299.  
NOTE On some mobile phones, to  
make the text voice reading function  
available, the text notification option on  
the phone must be enabled; this option  
299  
ENDING A CALL  
Press the graphic button  
Bluetooth® MODE  
This mode is activated by pairing a  
(A)  
®
fig. 300 on the display or the same  
button on the steering wheel controls  
to end a call in progress.  
Bluetooth device containing music  
tracks with the Uconnect™ system.  
A
B
PAIRING A BLUETOOTH®  
AUDIO DEVICE  
Only the ongoing call is ended and any  
call held becomes the new active call.  
Depending on the type of mobile  
phone, if the ongoing call is ended by  
the caller, the call held may not be  
activated automatically.  
®
The pairing of a Bluetooth device  
(e.g. a smartphone) is done via the  
"Device" screen on the "Phone" (A)  
fig. 302 page.  
301  
F0S2028  
Then select "Device Manager" and then  
"Settings".  
This function allows you to interact  
using some settings provided on the  
car. Some examples follow.  
The settings that are present but  
greyed out cannot be selected.  
Set as default  
Enable text messaging  
Auto connect as second phone  
302  
F0S2007  
300  
F0S2016  
Delete phonebook data  
®
Proceed as follows to pair a device:  
®
PHONE SETTINGS  
Enable Bluetooth audio player  
Enable projection  
activate the Bluetooth function on  
the device  
To access the phone settings, press  
the graphic button on the paired device  
(A) or (B) fig. 301 on any screen of the  
mode in which the button appears.  
Charge only mode  
Do not disturb  
Disconnect device  
Delete device  
access the “Devices” screen  
press the "Add Device" button  
a pop-up window Show the  
temporary PIN to be entered in the  
device: find Uconnect™ on the  
The “Do not disturb” function has  
a submenu from which you can  
customise the automatic reply in case  
of an incoming call or message or both.  
®
Bluetooth audio device  
when requested by the audio device,  
enter the PIN code shown on the  
300  
system display or confirm on the device  
the PIN displayed on the device  
if the pairing procedure is completed  
successfully, a screen is displayed.  
Answer “Yes” to the question to pair  
NOTE The double telephone feature is  
not available while using the telephone  
in CarPlay or Android Auto mode.  
NOTE When modifying the modifying  
Apple CarPlay AND  
Android Auto  
(where provided)  
The Apple CarPlay and Android Auto  
applications allow you to use your  
smartphone in the car safely and  
intuitively. To enable them, connect  
a compatible smartphone to the  
USB port of the car or in Wireless  
mode and the contents of the phone  
will be automatically shown on the  
Uconnect™ system display.  
®
the name-device in the Bluetooth  
settings of the phone (where  
®
the Bluetooth audio device as  
favourite (the device will have priority  
over all other devices to be paired  
subsequently). If "No" is selected, the  
priority is determined according to the  
order of connection. The last device  
connected will have the highest priority  
If no device has been registered, you  
can access the "Devices" directly from  
the "Phone" function.  
provided), the Radio may change the  
track being played if the device is  
connected switching on USB after  
®
the Bluetooth connection. After  
updating the phone software, for  
proper operation, it is recommended  
to remove the phone from the list of  
devices linked to the radio, delete the  
previous system pairing also from the  
To check the compatibility  
of your smartphone, see the  
indications on the websites:  
 
and  
If the smartphone is connected  
correctly to the car via the USB port or  
in Wireless mode, the Apple CarPlay or  
Android Auto icon will be displayed in  
®
NOTE Up to 20 device can be paired.  
In case of an attempt to pair a twenty-  
first device a pop-up window will notify  
that this is impossible. Remove a  
paired device to allow the pairing of a  
new one.  
list of Bluetooth devices on the  
phone and make a new pairing.  
®
WARNING If the Bluetooth  
connection between mobile phone  
and system is lost, consult the mobile  
phone handbook.  
place of the  
main menu.  
graphic button in the  
"DOUBLE TELEPHONE"  
FEATURE  
The Uconnect™ system allows  
Apple CarPlay App  
SETUP  
"DO NOT DISTURB"  
MODE  
®
simultaneous Bluetooth connection  
to two telephones. Only one of the two  
Apple CarPlay is compatible with the  
iPhone 5 or more recent models, with  
the iOS 7.1 operating system or later  
versions.  
Select the "Do Not Disturb" function  
on the "Device Manager" screen to  
activate the "Do Not Disturb" mode  
on a connected phone and exclude  
incoming calls and messages.  
connected devices can play multimedia  
®
content via Bluetooth .  
To activate the feature, select "Two  
active phones" on the "Device  
Manager" screen.  
Before using Apple CarPlay, enable Siri  
from Settings > General > Siri on the  
smartphone.  
301  
subsequent connections, Wireless  
mode is available automatically.  
Bluetooth  
Android Auto App SETUP  
Before use, download the Android Auto  
application to your smartphone from  
Google Play Store.  
NAVIGATION  
If the "Nav" mode of the system is  
already active, or when a device is  
connected to the car with a navigation  
session in progress, the system  
navigation mode is interrupted to  
continue the navigation session of the  
device.  
If a  
® pairing is cancelled, the  
pairing procedure must be repeated on  
the "Device Manager" menu.  
The application is compatible with  
Android 5.0 (Lollipop) and later  
versions. Starting from Android version  
10 and higher, the Android Auto app is  
integrated into the operating system of  
the smartphone and no downloading is  
required.  
INTERACTION  
After the setup procedure, the  
application will run automatically on  
the Uconnect™ system when your  
smartphone is connected to the USB  
port in the car.  
The selection can be changed at  
any time by accessing the chosen  
navigation system and setting a new  
destination.  
On the first connection, you will have  
to perform the setup procedure that  
appears on the smartphone. You can  
only perform this procedure with the  
car stationary.  
Apple CarPlay: To interact with Apple  
CarPlay press the steering wheel  
EXITING THE Android  
Auto AND Apple CarPlay  
Apps  
button  
(short press of the button)  
or the "Home" graphic button on the  
display in Apple CarPlay  
Android Auto: To interact with  
Android Auto press the steering wheel  
To end the Apple CarPlay or Android  
Auto session, physically disconnect  
the smartphone from the USB port of  
the car or using the "Device Manager"  
menu.  
Once connected to the USB port, the  
Android Auto application establishes a  
®
parallel Bluetooth connection.  
button  
(long press of the button)  
WIRELESS MODE  
or the "Microphone" graphic button  
on the display in Android Auto (where  
provided).  
You can use Apple CarPlay and  
Android Auto in Wireless mode, without  
the need to connect your smartphone  
to the USB port.  
VEHICLE MODE  
Pressing the "Vehicle"  
graphic  
VOICE COMMANDS  
button to access the pages:  
"Electric vehicle"  
"Controls"  
Voice commands are available using  
the voice assistant of the phone or  
Apple CarPlay or Android Auto.  
To configure this mode, follow the  
Bluetooth®  
procedure for pairing a  
"System settings"  
device. If successfully completed  
and the connected device supports  
Wireless mode, confirm that it starts  
on the message shown on your  
smartphone display and on the  
Uconnect™ system display. On  
302  
ELECTRIC VEHICLE  
The following submenus are available  
on the "Electric vehicle" page:  
Power flows  
Energy consumption is indicated by  
orange vertical bars (A) fig. 305 and  
energy recovery via coasting or braking  
by green vertical bars (B).  
Schedules, fig. 306 allows to program  
the charging of the high voltage battery  
or climate control system when the car  
is parked.  
History  
Schedules  
Charging process  
The Power flow, fig. 303, the power  
flow used by the battery, the electric  
motor (A) fig. 304 and the climate  
control system (B) in the charge  
mode chosen ("Normal", "Range" or  
“Sherpa”), in graphic form.  
304  
F0S2018  
Energy recovery during coasting  
(eCoasting) or braking (eBraking) is  
shown by a green flow from the electric  
motor to the high voltage battery and a  
negative consumption value (A).  
Use of high voltage battery power by  
the climate control system is shown  
by an orange flow to the passenger  
compartment ventilation outlets and a  
value (B) over 0 kWh.  
306  
F0S2020  
The page displays a summary of the  
programmed charging and climate  
control system operations with  
respective times and days of activation.  
Select "New programming" to define a  
new programmed charging or climate  
control system operation.  
History, fig. 305, displays the power  
flows used up to 15 minutes before or  
in the previous 7 days.  
303  
F0S0812  
When programming a battery charging  
operation, select "Operating frequency"  
to set the day and time for the start and  
end of charging.  
When programming the climate control  
system, a pop-up with the ignition  
device in the STOP position will ask  
the driver whether to recharge the  
305  
F0S2019  
303  
high-voltage battery or not despite  
the programmed function. Set the  
desired day and time to start the air  
conditioning system from this screen.  
The Charging status, fig. 307 displays  
the current battery level and gives  
an estimate of the maximum and  
minimum charging time (depending on  
the power supplied by the charging  
station (A) fig. 307). For home charging,  
you can also set five different power  
consumption levels according to your  
needs (B) fig. 307.  
CONTROLS  
Doors & Locks  
Key off options  
Radio Setup  
Reset  
Notifications  
Geolocation  
The following settings can be made  
using the “Controls” menu (for  
versions/markets, where provided):  
"Screen settings OFF"  
"Electrochromic rear view mirror"  
(where provided)  
"Rear view camera" (where provided)  
Software update  
System information  
Display  
Select this item to make the following  
settings:  
SYSTEM SETTINGS  
The "System settings" menu is  
available with the ignition device in the  
STOP or START position.  
You can access the settings in two  
ways by pressing the "Settings" button  
on the status bar, or from the main  
page of the function you are viewing, at  
the bottom right.  
"Language": to select the language  
to be set on the system  
"Display mode": to select "Auto" or  
"Manual”  
"Display brightness headlights on":  
to adjust the brightness of the Connect  
system display with the headlights on  
"Display brightness headlights off":  
to adjust the brightness of the Connect  
system display with the headlights off  
"Set theme": to select "Light" or  
"Dark" or "Auto”  
A
NOTE The menu items displayed vary  
according to the versions.  
The menu is indicative and includes the  
following items:  
B
My Profile  
Language  
Display  
Audio  
Units  
Safety and Driving Assistance  
Clock & Date  
307  
F0S2044  
"Units": to select the units of  
To adjust the power level, select one  
of the five values from "1" (lowest  
current) to "5" (maximum current)  
on this screen. The estimated time  
displayed on the screen will be updated  
accordingly.  
measurement in which distance,  
temperature, consumption, tyre  
inflation pressure are shown on the  
instrument panel display. The possible  
options are "UK", "Metric", "Custom"  
"Touchscreen beep": to select the  
volume level relative to the pressure of  
the buttons on the instrument panel  
and steering wheel  
®
Phone/Bluetooth  
Camera  
Lights  
Brakes  
304  
system provides indications, choosing  
either "Female" or "Male”  
"Wake Up Word (Off)": to set  
the password for logging into the  
Uconnect™ system  
"Voice Barge-in": to interrupt a voice  
message before it ends  
"Show command list": to  
enable/disable the list of suggestions  
of possible commands during a voice  
session  
"Show main category bar labels":  
to display the labels of the main  
categories on the graphic bar of the  
display  
"System text size": allows the size  
of the texts displayed by the system  
to be changed. Possible settings are  
"Default", "Large", "Taller".  
"Navigation turn-by-turn displayed  
in cluster" (where provided): to  
activate/deactivate the information  
provided by the Navigator on the  
instrument panel display  
"Time format": to select the time  
display format (you can choose  
between "24HRS" or"12HRS")  
"Voice options": to select the  
language in which the Uconnect™  
system provides indications, choosing  
either "Female" or "Male”  
"Phone pop-ups displayed in  
cluster": to activate/deactivate the  
repetition on the instrument panel  
display of the screens relating to the  
mobile phone function  
"Cluster options": to select which  
content to display in each of the three  
customisable areas on the instrument  
panel display (“Clock”, “Date”, “External  
temperature”, “RTE” (radio information),  
“Empty”  
to be set on the system  
"Display mode": to select "Auto" or  
"Manual”  
"Display brightness headlights on":  
to adjust the brightness of the Connect  
system display with the headlights on  
"Display brightness headlights off":  
to adjust the brightness of the Connect  
system display with the headlights off  
"Units": to select the units of  
measurement in which distance,  
temperature, consumption, tyre  
inflation pressure are shown on the  
instrument panel display. The possible  
options are "UK", "Metric", "Custom"  
"Touchscreen beep": to select the  
volume activation/deactivation relative  
to the pressure of the buttons on the  
instrument panel and steering wheel  
"Show main category bar labels":  
to display the labels of the main  
categories on the graphic bar of the  
display of the UConnect  
"Radio off delay": to select how long  
the Uconnect™ system will run after  
the motor is turned off:  
"O min": the Uconnect™  
system will switch off when the  
motor is switched off  
"20 min": the Uconnect™  
system will remain switched on  
for 20 minutes after the motor has  
been switched off  
"Key off power delay": to set the  
power-off time after the motor is  
stopped  
"Navigation turn-by-turn displayed  
in cluster" (where provided): to  
activate/deactivate the information  
provided by the Navigator on the  
instrument panel display  
"Time format": to select the time  
display format (you can choose  
between "24HRS" or"12HRS")  
"Voice options": to select the  
"Radio off with door": to  
activate/deactivate the switching off  
of the Uconnect™ system when  
the driver's door is opened, or the  
passenger's door is opened, or at the  
end of the switch-off time  
"App Drawer favouriting pop-ups": to  
activate/deactivate the pop-up saved in  
the favourites on the display  
My profile  
language in which the Uconnect™  
Select this item to make the following  
settings:  
"Language": to select the language  
305  
"App Drawer unfavouriting pop-  
ups": to activate/deactivate the pop-  
up saved in the non-favourites on the  
display  
broadcasts regional news ("REG"  
function)  
"Navigation settings": to display the  
same menus as Navigation  
"Active Lane Management" (where  
provided): to adjust the "Active Lane  
Management" system settings. The  
possible options are:  
"New Text Message pop-ups": to  
activate/deactivate new received text  
messages notification  
“Missed calls message": to  
activate/deactivate the display of  
missed calls  
"Nav pop-ups": to activate/deactivate  
the display of information provided by  
the Navigator on the instrument panel  
display  
"Audio settings": to set sound-related  
parameters (bass, treble, etc.)  
"Reset App Drawer to default order":  
to reset (restore) previously set apps  
and restore the default apps  
"Restore settings to default": to  
delete the settings from this menu and  
restore the default settings  
"More Profile Options": to set the  
profile (in the photo, remove the  
manufacturer’s account and put in one  
of your choice)  
"Lane Management". The  
possible options are: "Only  
vibration", "Only steering assist",  
"Vibration + steering assist".  
"Vibration strength" The  
possible options are: "Low",  
"Med", "High".  
"Intelligent Speed Limiter": to  
select the tolerance with which  
the Uconnect™ system sets the  
speed of the Adaptive Cruise Control  
(ACC) device. Possible options are  
"Confirmation" or "Automatic"  
"Intelligent Speed Assist" (where  
provided): to activate/deactivate the  
system.  
"LaneSense Warning": to select the  
"readiness" of the system to intervene  
to get the car back on in the lane if the  
Lane Control system intervenes The  
possible options are: "Near", "Med",  
"Late".  
"Traffic announcement": to  
activate/deactivate automatic tuning to  
traffic announcements ("TA” function)  
"DAB announcements" (where  
provided): to activate/deactivate  
automatic tuning to DAB  
Safety and Driving Assistance  
Select this item to make the following  
adjustments (where provided):  
"Automatic Emergency Braking":  
to select the intervention mode  
and intervention sensitivity of the  
Automatic Emergency Braking system.  
The possible options for "Automatic  
Emergency Braking" are:  
announcements  
"DAB announcements categories"  
(where provided): selection of  
announcement categories of interest  
from those available. Choosing this  
item accesses a series of selectable  
options  
"Pedestrian Emergency  
"LaneSense Strength": to select  
the power to apply to the steering of  
the system to get the car back on in  
the lane if the Lane Control system  
intervenes The possible options are:  
"Low", "Med", "High"  
Braking". The possible options  
are: "Off", "Warning + Active  
Braking"  
"Forward Collision Sensitivity".  
The possible options are: "Near",  
"Med", "Far"  
"Alternative Frequency": to  
activate/deactivate the automatic  
tuning to the strongest signal for the  
station selected ("AF" function)  
"Regional": to activate/deactivate the  
automatic tuning to a station which  
306  
"Side Distance Warning": to active  
("On") or deactivate ("Off") the  
indications provided by the Side  
Distance Warning system.  
"Blind Spot Assist": to select the  
intervention mode of the Blind Spot  
Assist, which signals the presence of  
objects in the blind spots of the exterior  
mirrors. Possible options are "Off",  
"Lights" and "Lights + Chime".  
"Off": system deactivated.  
"Traffic Sign Recognition" (where  
provided). This function can be used  
to select the Traffic Sign Recognition  
system signalling method. The possible  
options are: "Traffic sign blinking",  
"Traffic Sign Assist Sensitivity", "Traffic  
Sign Assist Warning". "Traffic Sign  
Recognition warning": to set the  
warning modes related to the Traffic  
Sign Recognition system. The possible  
options are:  
Clock & Date  
Select this item to make the following  
settings:  
"Sync time with GPS": to  
enable/disable synchronisation of the  
clock via GPS. If the setting is "OFF",  
the options "Set time" and "Set date"  
are activated  
"Set time": to adjust the time  
manually  
"Time format": to select the time  
display format (you can choose  
between "24HRS" or"12HRS")  
"Set date": to adjust the date  
(day/month/year) manually  
“Visual": the system warns the  
driver that an obstacle is present  
through visual indications using  
warning lights on the door mirrors.  
"Lights + Chime": the system  
warns the driver that an obstacle  
is present through sounds (using  
the speakers in the car) and visual  
indications using warning lights on  
the door mirrors.  
"Off": deactivation of the system  
warning mode  
"Chime” (where provided): the  
system warns the driver that there  
is an new road sign through on  
the car speakers  
Phone / Bluetooth  
Select this item to make the following  
settings:  
"Chime-Visual” (where  
provided): the system warns the  
driver that an new road sign is  
present through acoustic (via  
the speakers in the car) and  
visual warnings, the latter on the  
Uconnect™  
"Device Manager": to set some  
display parameters (e.g. day/night  
brightness, etc.)  
"Power Side Step" (where provided)  
The possible options are "Automatic"  
or "Manual".  
"Tyre Fill Assist" (where provided)  
To activate ("On") or deactivate ("Off")  
the display of indications provided by  
the iTPMS (Tyre Pressure Monitoring  
System).  
"Do not disturb all": to  
activate/deactivate the "Do not disturb"  
mode when receiving a phone call  
"Enable two active phones": to  
activate/deactivate two mobile  
telephones ("conference call" function  
activation)  
"New limit warning" (where  
provided) With this function you can  
activate/deactivate the instrument  
panel display of the new speed limit  
for the road you are currently driving.  
By clicking on “Mode”, it is possible to  
select the type with which the system  
provides warnings to the driver.  
"Night Vision video warnings" To  
activate ("On") or deactivate ("Off") the  
night vision video warnings.  
Voice  
Select this item to make the following  
settings:  
"Voice options": to select the  
307  
"Auto Dim High Beams" (where  
provided): to activate/deactivate the  
automatic high beam activation  
"Steering Directed Lights" (where  
provided): to activate/deactivate the  
adaptive front lights  
"Proximity wake-up" (where  
provided): to activate/deactivate the  
function  
language in which the Uconnect™  
system provides indications, choosing  
either "Female" or "Male”  
"Wake Up Word (Off)": to set  
the password for logging into the  
Uconnect™ system  
"Voice Barge-in": to interrupt a voice  
message before it ends  
"Show command list": to  
the function  
"Cargo camera dynamic centreline":  
to activate/deactivate the display of the  
central guidelines when reverse gear is  
engaged  
"Forward facing camera guidelines"  
(where provided): to activate/deactivate  
the view of the front guide lines on the  
display  
"Headlight off delay": to set the  
dipped beam headlight power-off time  
after the motor is stopped  
"Flash lights with lock": to  
activate/deactivate flashing when the  
vehicle doors are locked  
enable/disable the list of suggestions  
of possible commands during a voice  
session  
Mirrors and wipers  
Select this item to make the following  
settings:  
Navigation  
(where provided)  
"Auto-folding side mirrors": to  
activate/deactivate the automatic  
folding of the mirrors when the doors  
are locked/unlocked. The default  
setting is "Off"  
"Rain-sensing auto wipers": to  
activate/deactivate the automatic  
operation of the windscreen wipers  
when the rain sensor is activated  
Select this item to make the following  
settings:  
Brakes  
Select this item to make the following  
settings:  
"Show": to shows the navigation  
map on the display  
"Map view": to set the map display  
mode (you can choose between "2D",  
or "3D" format)  
"Routing": to set the types of  
alternative route  
"Sounds & alerts": to change the way  
danger and risk zones are signalled  
"Other": to show all navigation  
information on the display  
"Auto Park Brake": to  
activate/deactivate electric parking  
brake engagement when the motor is  
stopped  
"Brake service": to activate the  
procedure to service the braking  
system  
Lights  
Select this item to make the following  
settings:  
"Headlight Sensitivity": to select the  
sensitivity level ("1" or "2" or "3") for  
switching on the headlights  
"Greeting lights": to adjust the  
brightness of the courtesy lights  
(default setting is "0")  
Doors & locks  
Select this item to make the following  
settings:  
Camera  
(where provided)  
"Flash lights with lock": to  
activate/deactivate flashing when the  
vehicle doors are locked  
Select this item to make the following  
settings:  
"Virtual Wall": to activate/deactivate  
308  
"Equaliser"  
"1st press of key fob unlocks": allows  
you to set the driver-side doors only  
or all doors to open when the relevant  
button on the key is pressed with the  
remote control. The possible options  
are "Driver's door" or "All doors"  
activate/deactivate automatic tuning to  
traffic announcements ("TA” function)  
"DAB announcements" (where  
provided): to activate/deactivate  
automatic tuning to DAB  
"Speed Adjusted Volume"  
"Aux Volume Offset  
"AutoPlay"  
"Auto-On Radio"  
"Radio Off with the door"  
"Volume adjustment"  
announcements  
"DAB announcements categories"  
(where provided): selection of  
announcement categories of interest  
from those available. Choosing this  
item accesses a series of selectable  
options  
Key-off options  
Select this item to make the following  
settings:  
Notifications  
Select this item to make the following  
settings:  
"Radio off delay": to select how long  
the Uconnect™ system will work after  
the motor is turned off:  
"Key off power delay": to set the  
power-off time after the motor is  
stopped  
"Headlight off delay": to set the  
dipped beam headlight power-off time  
after the motor is stopped  
"App Drawer favouriting pop-ups": to  
activate/deactivate the pop-up showing  
the items recently saved or removed  
from in the favourites  
"App Drawer unfavouriting pop-  
ups": to activate/deactivate the pop-  
up showing the items recently saved or  
removed from in the non-favourites  
"New Text Message pop-ups": to  
activate/deactivate new received text  
messages notification  
“Missed calls message": to  
activate/deactivate the display of  
missed calls  
"Nav pop-ups": to activate/deactivate  
the display of information provided by  
the Navigator on the instrument panel  
display  
"Alternative Frequency": to  
activate/deactivate the automatic  
tuning to the strongest signal for the  
station selected ("AF" function)  
"Regional": to activate/deactivate the  
automatic tuning to a station which  
broadcasts regional news ("REG"  
function)  
"Radio Off with door": to  
activate/deactivate the switching off  
of the Uconnect™ system when  
the driver's door is opened, or the  
passenger's door is opened, or at the  
end of the selected switch-off time  
"Windows with key fob": to  
activate/deactivate the opening/closing  
of the electric windows when  
unlocking/locking the doors using the  
key with remote control  
Geolocation  
(where provided)  
This item can be used to activate or  
deactivate geolocation mode.  
Software update  
Selecting this item to go to the  
"Software downloads over Wi-Fi"  
setting to activate/deactivate the  
automatic downloading of the latest  
version (where provided) of the  
Uconnect™ system software.  
Radio setup  
Audio  
Select this item to make the following  
settings:  
"Traffic announcement": to  
Select this item to make the following  
settings:  
"Balance/Fader"  
309  
Reset  
RECENT  
Selecting this item restores the  
menu of apps to the order set by the  
manufacturer.  
The "Recent" submenu contains  
recently used or downloaded apps.  
Apps are displayed in chronological  
order.  
APP  
OTHER CATEGORIES  
The "Other categories" submenu  
contains the list of filtered categories  
between apps. The following are  
displayed in order:  
Press the "App" graphic button to  
display the following submenus:  
"Favourites"  
"Recent"  
"Categories"  
“All”  
To add or remove an app from the  
Favourites list, select or deselect the  
Media  
Comfort  
Phone  
Vehicle  
System  
Other  
icon that appears in the list  
displayed in the "Recent", "Categories"  
or "All" pages. A pop-up message will  
ask whether you want to save the app  
in your favourites or not.  
The applications in each category are  
displayed in alphabetical order.  
NOTE The menu items displayed vary  
according to the versions.  
FAVOURITES  
The "Favourites" submenu contains  
(for versions/markets, where provided)  
the "Electrical functions" and  
ALL  
The "All" category contains all available  
apps and allows the driver to search for  
them in alphabetical order from A to Z  
or Z to A.  
"Performance" pages.  
The "Favourites" page can contain up  
to 6 favourite pages. A message will  
indicate that you have reached the  
maximum number of pages allowed if  
you try to add an additional page.  
The operation can be cancelled by  
selecting "Cancel" or “X”.  
310  
NAVIGATION (where provided)  
Press the "Nav" graphic button to show the navigation map on the display.  
308  
F0S2061  
311  
without having completed engagement,  
a specific warning message will be  
displayed and the operation will be  
ended. We recommend the use of  
voice commands while driving.  
NAVIGATION  
“Trips”: Select this button to  
show your saved Trips.  
You can use map view in the same way  
as you might look at a conventional  
paper map.  
"Maps": select this button  
to display a list of installed  
maps. The maps are updated  
automatically.  
You can move around the map using  
gestures, and zoom using the zoom  
buttons.  
Navigation main menu  
In "Map view" or "Guidance view", tap  
You can find your destination by  
selecting it on the map, by choosing  
a saved destination (e.g. "Home" or  
"Work") or by searching for an address  
using the "Search" button in the main  
menu.  
the "Main menu" button  
menu.  
to open the  
"Settings": select this button  
to open the Settings Menu. In  
the "Settings" menu, you can  
change the items shown on the  
navigation display.  
The following buttons are available in  
the main menu:  
ꢀ
"Search”: select this graphic  
button to search for an address,  
a place or a point of interest,  
then plan a route to the location.  
After selecting the destination, a route  
is planned and displayed on the "Map  
View" screen. On the right-hand side  
of the display is the route bar, which  
provides an additional indication of  
events along the route, such as  
accidents and speed cameras. The  
arrival time and remaining distance are  
also available.  
System buttons  
The following buttons are available in  
the different displays of the navigation  
system:  
ꢀ
"Add Home": select this button  
to set the location of your home.  
After selecting a destination,  
clicking on a point on the  
map or using the search  
function, select this button. The  
navigation system will find the  
best route and, if available,  
two alternative routes. You  
can select an alternative to  
avoid tolls or heavy traffic, for  
example.  
"Add Work": select this button  
to set the work position.  
You can choose to view the route via a  
3D image in the "Guidance view".  
NOTE The navigation system volume  
can only be adjusted during navigation  
when the system provides voice  
indications.  
"Recent": Select this button  
to open the list of recent  
destinations. Select a recent  
destination to plan a route to  
that destination.  
NOTE In some countries, the use of the  
keyboard is only permitted when the  
car is stationary. If an attempt is made  
to enter text (e.g. an address) with the  
car in motion or if driving is resumed  
Use this button to decide  
whether to display the results on  
the map or in a list.  
"Favourites": select this button  
to show the saved favourite  
places.  
312  
NOTE The dealer may charge for  
updating the navigation system.  
WIDGETS  
Use this button to access the  
"Route Options" menu. With an  
active route, you can change  
the route from this screen.  
On the main page, you can view  
summary pages of Uconnect™  
system functions known as “Widgets”,  
which you can choose from a list of  
available Widgets.  
Voice Commands  
NOTE Voice entry of addresses is  
only supported in the country in which  
you are located and provided that  
the system language matches the  
local language. For example, if the car  
is located in Italy, it will be possible  
to enter Italian addresses only if the  
system language is set to "Italian".  
The following voice commands can be  
given after pressing the button on the  
Select this button to return to  
the previous screen.  
To add a Widget, press the button  
on the display and select the desired  
Widget from the list.  
Select this button to return to  
the "Map view" screen.  
Some Widgets can also be customised  
by pressing the button  
next to the  
title. This will open the customisation  
screen.  
Select this button to switch  
between the "3D direction up",  
"2D direction up" and "2D north  
up".  
The number of Widgets which can be  
installed per page depends on their  
size. You can add multiple pages (up to  
a maximum of five in total) by pressing  
the "+" button on the display. To switch  
between pages, simply touch the page  
briefly and swipe your finger rightwards  
or leftwards.  
steering wheel  
:
Find <PDI> (Point of Interest)  
near/along the route  
Let's go <home>/<to work>  
Go to <address>  
Go to <city name> centre  
Drive to <address>/<PDI>/<  
junction>  
Navigate home  
Go via home  
Clear route  
Select this button to choose  
between audio instructions,  
warning only or no sound.  
Map update  
To ensure optimal performance, the  
navigation system must be updated  
periodically. For this, the Mopar Map  
Care service offers a new map update  
every three months.  
Pages can be deleted using the "Delete  
page" function or reordered using the  
"Reorder pages" function.  
NOTE The customisation is only active  
when the car is stationary. If an attempt  
is made to customise with the car in  
motion or to resume driving without  
having completed the procedure, a  
warning message will appear on the  
Uconnect™ system display and the  
operation will be ended.  
Recent Destinations  
Stop at a recent destination  
2D view  
The updates can be downloaded from  
the maps.mopar.eu website and  
installed directly on the Uconnect™  
system. All updates are free of charge  
for 3 years from the start of the  
warranty on the car.  
3D view  
Volume adjustment  
The volume of the navigation system  
can only be adjusted when the  
navigation system provides voice  
commands.  
The navigation system can also be  
updated at the Fiat Dealership.  
313  
MOVING THE WIDGETS  
Select the desired widget and then:  
may be (for versions/markets where  
provided):  
"Call"  
"Customised settings"  
"Media"  
"FM radio"  
SCROLLING /  
SELECTING A LIST  
Move your finger on the display to  
scroll lists and make selections.  
Hold your finger down and move up  
to display the list items at the bottom;  
move down to display the list items at  
the top.  
"AM radio"  
"DAB radio"  
"Bluetooth"  
"USB 1"  
Moving the widget: hold the desired  
widget pressed for a few seconds and  
then move it to the right or left of the  
display.  
Move right to display the lists on the  
left-hand side.  
"App"  
Move left to display the lists on the  
right-hand side.  
"Audio setup"  
"Comfort" (where provided)  
"Controls"  
"Media"  
"Screen off"  
"Settings"  
"Trip "(where provided)  
"AM radio"  
"FM radio"  
"DAB radio"  
"USB 1"  
"Bluetooth"  
The same operation can be performed  
to move between pages.  
Press your finger on your chosen  
selection to enter it in the system.  
Resizing the widget: press the  
widget resize icon to be resized.  
PROFILES  
By entering the “Profiles” mode you  
can create an avatar and enter your  
own customisations.  
Selecting "All profiles" (A) fig. 309  
displays the existing profile.  
"Device Manager"  
"Driver profiles"  
"Notifications"  
"Activate services"  
"Assist"  
"Electric vehicle"  
"Eco Score"  
"Warnings”  
View widget content: select the  
desired widget and then scroll  
vertically. When reordering the widgets  
(viewing their thumbnails), it will not be  
possible to view their contents.  
SHORTCUTS WIDGETS  
Shortcuts (which can only be added  
with the car stationary) enable quick  
access to system contents. They  
“SOS"  
"Wi-Fi Hotspot"  
309  
F0S2071  
314  
settings to allow driving the car without  
customisations.  
assistance systems are not available  
during the update. It is recommended  
to carry out the update when the car is  
stationary.  
Selecting "Edit profile” (B) fig. 310  
allows you to enter or edit  
customisations in the profile fig. 311.  
The profile customisations can be  
deleted using either "Edit profile” or the  
"Del. personal data” function fig. 311 in  
the "Settings" menu.  
NOTE After changing the profile, it  
is necessary to wait up to about 5  
minutes to load the relative settings to  
the Uconnect™ system.  
INSTANT UPDATE  
Press the "Update Now" button  
fig. 312 to update the software  
immediately when the pop-up window  
appears on the display.  
UPDATING THE SYSTEM  
The Uconnect™ system can be  
updated remotely via Over The Air  
upgrade.  
NOTE The images are given by way  
of example only. They may differ from  
those shown below according to the  
version/market.  
NOTE Instead of using external Wi-Fi  
connections, Over The Air software  
updates use the data connectivity  
included with the car, at no additional  
cost to the customer.  
310  
F0S2072  
312  
F0S2074  
When a software update is available, a  
pop-up window will appear on screen  
informing that a new software version  
or new features for the Uconnect™  
system are available.  
SCHEDULED UPDATE  
In case of a mandatory update, press  
the "Update now" or “Schedule  
update" button fig. 312. The scheduled  
update option allows you to define a  
different update time.  
WARNING Some car settings or phone  
settings may be lost after an Over The  
Air software update. Check and re-  
enter any missing Uconnect™ system  
settings, if necessary.  
Press the arrows  
to set the desired time.  
/
on the display  
311  
F0S2073  
NOTE The scheduled update option  
can be used 20 times per update. After  
the 20th postponement the update will  
be made mandatory when the engine  
is first started. In case of a mandatory  
All profiles can be temporarily disabled  
and the “Parking attendant” mode  
can be recalled by pressing the  
corresponding icon. This mode  
temporarily restores the default  
NOTE The rear-view camera,  
Uconnect™ system and other driver  
315  
update you can only press the "OK"  
button on the pop-up and start the  
update.  
To allow the Uconnect™ system to  
update its software:  
SCHEDULED UPDATE  
Use the scheduled update option to set  
a deferred update time.  
select "Settings" on the display  
select “Wi-Fi” in the settings list  
select the correct Wi-Fi router from  
those shown  
During the update the display will  
show the percentage of the update  
completed and the time remaining until  
completion, fig. 313.  
Press the arrows  
to set the desired time.  
/
on the display  
NOTE The scheduled update option  
can be used 20 times per update. After  
the 20th postponement the update will  
be made mandatory when the engine  
is first started. In case of a mandatory  
update you can only press the "OK"  
button on the pop-up and start the  
update.  
NOTE If the Wi-Fi router is too far from  
the car, it will not be shown among the  
available ones.  
When the update is complete the  
Uconnect™ system will automatically  
restart.  
if prompted, enter the password to  
access the router and select "OK"  
Proceed as follows to enable the  
software updates:  
During the update the radio will  
show the percentage of the update  
completed and the time remaining until  
completion fig. 313.  
Select “Enable software download  
over Wi-Fi" the Wi-Fi settings screen  
when a software update is available,  
a pop-up window will appear on the  
Uconnect™ system display to warn  
that a new update is available. When  
prompted to connect to a Wi-Fi  
network, select "Yes"  
During the update, a second pop-up  
will show the estimated time remaining  
and the progress percentage of the  
update. When the update is finished,  
press "OK"  
When the update is complete the  
Uconnect™ system will automatically  
restart.  
313  
F0S2075  
UPDATE ERRORS  
In case of errors during the update, the  
operation will be interrupted and the  
following messages will appear:  
"An error has occurred. The system  
will revert to the previous software  
version."  
UPDATES OVER  
EXTERNAL WI-FI  
When a software update via Wi-Fi  
is available, a pop-up window will  
appear on the display of the offering  
the update instantly or at a later time.  
NOTE The rear-view camera,  
Uconnect™ system and other driver  
assistance systems are not available  
during the update. It is recommended  
to carry out the update when the car is  
stationary.  
INSTANT UPDATE  
Press the "Update Now" button to  
update the software immediately when  
the pop-up window appears on screen.  
"Update failed. - An error was  
detected during the update procedure.  
Please contact your dealer. Error code:  
XXXX"  
Contact a Fiat Dealership in these  
cases.  
316  
completed and the time remaining until  
completion.  
Uconnect Box UPDATES  
(where provided)  
The list of available voice commands  
is shown on the display divided by  
categories.  
When the update is complete the  
Uconnect™ system will automatically  
restart.  
The Uconnect™ system can update  
the Uconnect Box remotely via Over  
The Air update.  
Suggestion  
A list of frequently used voice  
commands is displayed.  
Navigation  
NOTE Instead of using external Wi-Fi  
connections, Over The Air software  
updates use the data connectivity  
included with the car, at no additional  
cost to the customer.  
Update errors  
In case of errors during the update, the  
operation will be interrupted and the  
following messages will appear:  
"An error has occurred. The system  
will revert to the previous software  
version."  
"Update failed. - An error was  
detected during the update procedure.  
Please contact your dealer. Error code:  
XXXX"  
See the "Navigation" paragraph.  
PHONE  
If a phone is connected to  
the Uconnect™ system over  
Bluetooth®, these commands can  
be given by any of the main displays  
provided that there are no ongoing  
phone calls.  
When a software update Uconnect  
Box is available, a pop-up window  
will appear on the screen offering the  
update instantly or at a later time.  
NOTE The Uconnect Box can only be  
updated when the car is off (ignition  
device in STOP).  
If no phone is connected via  
Bluetooth®, the Uconnect™ system  
will provide voice message and the  
session will be closed.  
Contact a Fiat Dealership in these  
cases.  
Instant update  
Press the "Update Now" button to  
update the software immediately when  
the pop-up window appears on screen.  
The update will take place with the car  
is off. When the update is complete the  
Uconnect™ system will automatically  
restart.  
VOICE COMMANDS  
NOTE Voice commands are not  
available for languages not supported  
by the system.  
Call <contact name>: to dial the  
phone number associated with the  
contact  
Call <number>: to dial the phone  
number  
Write message: to start the voice  
process to send a text  
Call back: to call the number or  
contact associated to the last outgoing  
call  
To use voice commands, press the  
"Voice"  
button on the steering  
wheel controls or the button  
on the  
Scheduled update  
Use the scheduled update option to set  
a deferred update time.  
display and say out loud the function  
you want to activate. Alternatively, the  
function can be activated by saying  
"Hey FIAT" or "Hey Uconnect" (if the  
driver has previously enabled the  
function).  
Press the arrows  
to set the desired time.  
/
on the display  
Recent calls: to show the list of the  
last calls made, missed and received  
Show calls made: to display the  
outgoing calls list  
During the update the display will  
show the percentage of the update  
317  
Show missed calls: to view the  
missed calls list  
Show received calls: to view the  
received calls list  
Play artist <artist name>: to play  
music by the requested artist  
Play <genre name> genre: to play  
music of the required genre  
Play <Playlist name> playlist: to play  
the required playlist  
Lower the fan speed: to reduce the  
fan speed of the climate control system  
Turn the A/C on: to start the  
automatic climate control system  
NOTE If the fields include special  
characters of languages not supported  
by the system (e.g. Greek) the voice  
commands will not be available.  
TEXT  
If a phone is connected to  
RADIO  
the Uconnect™ system over  
Bluetooth®, these commands can  
be given by any of the main displays  
provided that there are no ongoing  
phone calls.  
These commands can be given from  
any screen provided that there are no  
ongoing phone calls.  
CONNECTED  
SERVICES -  
UCONNECT  
SERVICES  
I want to listen to the radio: to start  
playing the last radio station you  
listened to.  
If no phone is connected via  
Bluetooth®, the Uconnect™ system  
will provide voice message and the  
session will be closed.  
Play <name> radio: to start playing  
the chosen radio  
(for versions/markets, where provided)  
273)  
Send a message to <contact>  
mobile/work: to start the voice process  
to send a text message to a contact.  
Play channel <number>: to start  
playing the selected web radio channel  
Tune to <frequency><FM>/<AM>: to  
tune the radio to the chosen frequency  
Tune to <Radio name>: to tune the  
radio to the chosen station  
Uconnect Services connected services  
enrich the experience of use of the car  
by connecting it to the network.  
The services (where provided) allow  
you to receive timely assistance in  
case of need and emergency, to obtain  
information about the status of your  
car, its location, control it remotely and  
to improve the navigation experience  
(where provided) thanks to real-time  
updates.  
MEDIA  
These commands can be given from  
any screen provided that there are no  
ongoing phone calls.  
Tune to <Radio name> DAB channel:  
to tune the radio to the chosen station  
I want to listen to music: to start playing  
the last radio station you listened to.  
Play <track> by <artist>: to play the  
requested track  
Let me hear some <genre>: play  
music of the required genre  
Show my playlists: to show the list of  
saved playlists  
CLIMATE  
These commands can be given from  
any screen provided that there are no  
ongoing phone calls.  
You can access the Uconnect Services  
through the dedicated FIAT app for  
smartphones or smartwatches, a web  
portal, or the Uconnect™ system of  
your car.  
Set temperature to <value>: to  
set the desired temperature on the  
automatic climate control system  
I feel cold/Make it warmer: to  
increase the set temperature on the  
automatic climate control system  
Play album <album name>: to play  
the requested album  
The availability of services requires a  
UConnect Services contract.  
318  
Uconnect™ system. Any discrepancy  
between the date and time on the  
display and the actual date and time  
may be due to a malfunction in the  
Connected Services.  
Read more about the Uconnect  
Services – applicability, availability,  
compatibility, packages and  
Uconnect Services not available in all  
markets and is subject to limitations  
depending on Uconnect™ system  
type, location and duration of the  
services.  
The full operation of the Uconnect  
Services, including the ASSIST call, is  
subject to mobile network and GPS  
geolocation coverage, without which  
the proper provision of services is not  
guaranteed. Coverage may not be  
guaranteed in places such as tunnels,  
garages, multi-storey car parks,  
mountains.  
In case of mobile network overload  
or problems related to the power  
supply of the vehicle (e.g. low battery),  
the services may not be available.  
When using the services, customers  
shall keep their passwords secret for  
strictly personal use and not to disclose  
them to third parties.  
specifications – on the Fiat website.  
GENERAL DISCLAIMER  
Personal data & privacy  
According on the equipment of the car  
and of the country, different services  
may be available for different durations.  
For further information about your car,  
go to the personal page on the official  
Fiat website.  
The manufacturer will, processes  
and uses the personal data of the  
vehicle in accordance with legal  
requirements. Read more about the  
general conditions of service and data  
protection policies on the Fiat official  
website.  
The Customer is solely responsible  
for using the services in the vehicle,  
even if by other people, and shall  
inform all users and occupants of the  
vehicle about the services and the  
functions and limits of the system.  
If the SOS emergency service  
is activated, the call will be  
automatically routed to the 112  
emergency service number or  
the Manufacturer’s Call Centre  
(depending on market).  
Some of the packages made available  
to the customer are:  
My Assistant: Customer assistance  
and safety warning service, which  
includes:  
"ASSIST call" (see "In an  
emergency” section).  
"Vehicle Health Report":  
information on the status and  
condition of the car, notifying  
potential maintenance needs  
to the customer via periodic  
e-mails. This service is provided  
on condition that the Customer  
has previously provided the  
Stellantis network with a valid  
e-mail address.  
"In-Vehicle Alerts (Basic)": to  
receive messages and/or alerts  
regarding recall campaigns or  
other important messages  
SERVICES  
WARNING Some of the services listed  
below may not be available if the car  
is left with the engine off for more than  
20 days. Start the engine to reactivate  
these services.  
Operating prerequisites  
To use some of the Uconnect  
Services, you need to register  
on the dedicated portal  
which  
can be accessed from the official Fiat  
website, and activate and login to your  
devices.  
NOTE The date and time shown on the  
Uconnect™ system display must  
match the actual date and time, even  
after disconnecting the battery. Adjust  
it from the "Settings" menu of the  
on the Uconnect™ system  
display. You can contact the  
319  
services that allow to manage,  
quality of the service offered by the  
integrated Wi-Fi Hotspot depends on  
the coverage of the mobile operator's  
network. Users with active data plan  
with the Wi-Fi Hotspot service can  
also use the radio-activated voice  
service on-board the car to perform  
operations, such as checking the  
weather or news, playing music,  
interacting with the navigation system  
and remotely controlling intelligent  
devices in their home.  
manufacturer’s Customer Service  
for further information regarding  
the messages received.  
remotely, all the functions related  
to the of the high-voltage battery  
charging, such as charging activation,  
charging programming and charge  
level monitoring. When a high-voltage  
battery charge session is planned using  
the Uconnect™ system display of the  
car, or via the Fiat app, and charging is  
taking place using devices/charging  
points which have their own planning  
solutions, make sure that the  
My eCharge: is a service that allows  
you to find, use and pay for charging at  
public charging stations and keep track  
of your charging history. The service  
also allows you to manage recharges  
with your private wallbox charging  
station directly from your smartphone.  
My Car: vehicle status monitoring  
service:  
programming functions are compatible  
with those of the car itself, as otherwise  
charging might not take place.  
NOTE The hotspot name and  
"Vehicle Information" and  
"Vehicle Health Report":  
information and alerts related to  
battery level, tyre pressure, and  
odometer.  
"In-Vehicle Alerts: possibility  
to receive messages and/or  
notifications related to the  
provision of services and reminder  
messages about the execution of  
service and/or recall campaigns  
on Uconnect™ system  
password can only be changed with  
the ignition device in motor position  
and the system in "READY" state (the  
car is ready to go).  
My Navigation: connected  
navigation service (subject to availability  
according to version/market). The  
navigation system is automatically  
updated by prioritising the maps of the  
area most frequented by the user.  
My Wi-Fi: Optional Wi-Fi Hotspot  
service. This service provides  
Internet access from the car to  
all devices with Wi-Fi connection  
(smartphones, tablets, laptops)  
(supported technologies: 3G – 4G).  
This creates a private Wi-Fi internet  
access point in the car. The function,  
available only with the ignition device  
to ENGINE or with the engine running  
allows the connection of up to eight  
devices simultaneously, but not direct  
communication between devices. The  
You can enrich your Uconnect Services  
experience by purchasing optional  
services for which a subscription is  
required.  
The services can be subscribed to  
independently by the customer from  
the catalogue of services available for  
the car, directly on the personal page  
of the official Fiat website.  
display. You can contact the  
manufacturer’s Customer Service  
for further information regarding  
the messages received.  
My Alert: optional service with  
app and web notifications in case  
of suspected theft attempts and  
assistance in case of theft.  
My Remote: this can be used to  
manage remote operations (switching  
on lights, door lock/unlock, find vehicle,  
etc.) from the FIAT mobile app and  
through compatible voice assistants. It  
is also possible to use the "E-Control"  
DEACTIVATION OF  
GEOLOCATION MODE  
(for versions/markets, where provided)  
If you wish to deactivate geolocation  
320  
the wait time between turning off the  
engine and turning it back on.  
device from STOP to ENGINE and  
back several times to re-establish all  
audio and video functionality, .  
mode, simply do so from the  
Uconnect™ system (see the  
"Settings" menu of the Uconnect™  
system for more details).  
UPDATING THE SYSTEM  
Uconnect Services and the  
When geolocation mode is deactivated  
some of the services on mobile apps  
and web that use the location of the  
car will not be available.  
DEACTIVATING  
UCONNECT SERVICES  
If you sell your car on which the  
Uconnect Services are still active, you  
will be responsible for logging off your  
profile from the services on the page on  
the official Fiat website, by contacting  
the Customer Care or by going to a  
Fiat Dealership.  
Uconnect™ system application  
software are updated remotely in order  
to provide the customer with newer  
software versions that include new  
features or enhancements/enrichments  
of features already offered.  
WARNING The icon at the top of  
the Uconnect™ display indicates  
that the geo-location function is  
active (ON). When geolocation is on,  
the car position is tracked to enable  
the functions that require it. When  
geolocation is off, the car position  
is only tracked by the navigation,  
safety, insurance and driver assistance  
systems (where provided). See the  
Uconnect™ system "Settings" chapter  
to deactivate the function.  
Updates are made at the  
manufacturer’s discretion.  
You will also be responsible for  
informing the new owner of any  
services which have not yet expired  
associated with a new Uconnect  
Services account.  
Some system updates will be  
managed automatically, others will be  
communicated to the Customer by  
showing messages on the display  
of the Uconnect™, allowing the  
customer to confirm or postpone the  
update itself.  
IMPORTANT  
The customer will be notified by the  
Uconnect™ system if the system is  
unavailable.  
273) Always follow the highway code of  
the country in which you are driving, and  
concentrate on the road. Always drive  
safely with your hands on the steering  
wheel. Only use the Uconnect™ system  
functions when you are sure that it is safe  
to do so. The customer is liable for all risks  
associated with using the functions and  
applications of the car. Failure to follow  
these rules may cause serious accidents  
and/or death.  
WARNING If the “default settings  
are restored”, turn off the engine  
(ignition device to STOP) and wait a  
few minutes before restarting it (ignition  
device to ENGINE). The incorrect  
performance of the operation and the  
short period of time passed between  
turning off the engine and turning  
it back on may cause the Privacy  
settings to not be maintained. In this  
case, repeat the operation, extending  
To read more about services, features,  
specifications, availability and any  
updates please always refer to the  
content included in the official Fiat  
website.  
WARNING Some automatic system  
updates could take place during a  
phase of non-use, with the engine off.  
This may require to switch the ignition  
321  

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot