system operation may have occurred.
The possible reasons of this limitation
are something blocking the camera
view or a fault.
Versions with reconfigurable
multifunction display
When the system is active and the lane
limits have not been detected, the lane
lines are grey and a dedicated icon is
shown in the dedicated top area of the
display.
If an obstruction is signalled, clean the
area of the windscreen by the interior
rear-view mirror and check that the
message has disappeared.
Exiting a lane with detection of one
or both limits
Although the car can still be driven in
normal conditions, the system may be
not completely available.
110
F0S1437
When the system is active, the lane
lines on the display become white to
indicate successful detection of the
limits fig. 109.
When the system detects that the car
has approached the lane line and is
about to pass it, the left line on the
display (yellow) flashes, the car icon
on the display turns yellow and the
steering wheel will start vibrating.
The system works even when only one
of the two lane lines is detected. On
the display, the corresponding line will
turn white, while the other will be grey.
In this case, the system intervenes only
for lane departure in the direction in
which the limit is present.
When the conditions limiting the
system functions end, this will go back
to normal and complete operation.
Should the fault persist, contact a Fiat
Dealership.
No hands on steering wheel
detection
If the system detects no hands from
the steering wheel during active system
intervention, the system will produce an
escalation of visual-acoustic warnings,
which will take 15 seconds to invite
the driver to put the hands on the
steering wheel. If you do not put your
hands on the wheel within this time, the
system will disconnect and provide an
additional warning for 5 seconds.
109
F0S1438
Changing the system settings
The settings of the system can be
changed through the Uconnect™
system (see description in the
dedicated supplement).
When the system detects that the
car has approached the lane line, the
corresponding line on the display turns
yellow and the car icon shown on the
display becomes yellow fig. 110.
System Fault Message
System limited operation warning
If the system switches off and a
dedicated message is shown on the
display, it means that there is a fault on
the system.
34) 35)
If the dedicated message is shown
on the display, a condition limiting the
112
English 
