Get TECHNICAL SPECIFICATIONS Guide for Fiat 500 SUV Second Generation (2020-2025)

TECHNICAL SPECIFICATIONS

Everything you may find useful for

IDENTIFICATION DATA ............... 247

ENGINE .................................... 249

BATTERY.................................. 250

TRANSMISSION ........................ 251

BRAKES ................................... 252

SUSPENSION............................ 253

STEERING ................................ 254

WHEELS................................... 255

DIMENSIONS ............................ 261

WEIGHTS ................................. 262

REFUELLING............................. 264

FLUIDS AND LUBRICANTS ......... 265

PERFORMANCE........................ 267

understanding how your car is made

and works is contained in this chapter

and illustrated with data, tables and

graphics. For the enthusiasts and the

technician, but also just for those who

want to know every detail of their car.

PRESCRIPTIONS FOR

HANDLING THE CAR AT THE

END OF ITS LIFE........................ 268

246

H Fiat colour code.

I Motor type.

IDENTIFICATION

DATA

L Type variant version.

M Spare part number.

It is advisable to take note of the

identification codes. The following

identification codes are printed and

shown on the plates:

Vehicle identification number (VIN)

plate.

Chassis marking.

Bodywork paint identification plate

(where provided).

Motor marking.

A

B

C

D

E

F

G

VEHICLE

IDENTIFICATION

NUMBER (VIN) PLATE

(The label is shown divided into two

parts for reading purposes)

It is applied to the left front pillar

fig. 258.

I

H

L

258

F0S1327

M

It contains the following information

fig. 259:

A Name of Manufacturer.

B Vehicle type-approval number.

C Car identification number.

D Maximum authorised weight of car

fully laden.

259

F0S1301

BODYWORK PAINT

IDENTIFICATION PLATE

(where provided)

E Maximum authorised weight of fully

laden car plus trailer (field not used).

F Maximum permitted weight on first

axle (front axle).

Depending on the version, the plate

may be applied to the external tailgate

pillar (left side) and contains the

following information fig. 260:

A Paint manufacturer.

G Maximum permitted weight on

second axle (rear axle).

B Colour name.

247

C Fiat colour code.

D Respray and touch up code.

262

F0S1351

car type;

chassis serial number.

260

F0S1335

Alternatively, depending on the version,

the Fiat Colour Code may be integrated

in the type-approval data summary

plate (H field fig. 259).

MOTOR MARKING

It is shown on the plate (fig. 259) and is

engraved on the motor body fig. 263.

CHASSIS MARKING

It is applied under the mat at the

passenger side front seat fig. 261

and visible through a dedicated flap.

It contains the following information

fig. 262:

263

F0S1174

261

F0S1173

248

ENGINE

ꢀ

GENERAL INFORMATION

High Range/Low Range

Engine code

46348460

Maximum power (CEE) (kW)

Maximum power (CEE) (HP)

corresponding engine speed (rpm)

Maximum torque (CEE) (Nm)

Maximum torque (CEE) (kgm)

87

117

4200

220

22.43

249

BATTERY

ꢀ

High Range

Low Range

Type

Lithium Ion (Li-ion)

Fluid

Cooling / Heating

Rated voltage

352 V

396 V

Battery operating temperature

-30 / 60°C (*)

(*) The temperature of 60°C is to be understood as the temperature that the battery can reach, it is not to be understood as the operating

temperature of the car.

250

TRANSMISSION

ꢀ

Versions

Transmission

Traction

One-speed transmission

Reduction ratio: 1:9.56

All versions

Front

251

BRAKES

ꢀ

Versions

Front service brakes

Rear service brakes

Parking brake

Drum, self-centring shoes with

control cylinder for each wheel

All versions

Disc

Electric

WARNING Water, ice and salt spread on the roads may deposit on the brake discs reducing braking efficiency the first time the

brakes are applied.

252

SUSPENSION

Versions

Front

Rear

MacPherson independent wheels with

mechanical crossmember, shock absorbers

and coil springs; with anti-roll bar for

versions with electric power steering

Axle with torsion bridge; consisting of torsion

beam with longitudinal arms and comfort

bushings, shock absorbers and propeller

springs

New 500

253

STEERING

Versions

Kerb-to-kerb turning circle (m)

Type

All versions

9.3

Rack and pinion with electric power steering

254

CORRECT READING OF

THE TYRE

Maximum speed index for snow

tyres

WHEELS

RIMS AND WHEELS

QM + S up to 160 km/h

TM + S up to 190 km/h

Pressed steel or alloy rims. Tubeless

radial carcass tyres. All approved tyres

are listed in the registration document.

S

1

2

^Hꢀ^{M + S up to 210 km/h}

Load index (capacity)

H

WARNING If there are any

3

discrepancies between the Owner

Handbook and the registration

document, take the information from

the latter. For safe driving, the car must

be fitted with tyres of the same make

and type on all wheels.

70 = 335 kg

71 = 345 kg

72 = 355 kg

73 = 365 kg

74 = 375 kg

75 = 387 kg

76 = 400 kg

77 = 412 kg

78 = 425 kg

79 = 437 kg

80 = 450 kg

81 = 462 kg

82 = 475 kg

83 = 487 kg

84 = 500 kg

85 = 515 kg

86 = 530 kg

87 = 545 kg

88 = 560 kg

89 = 580 kg

90 = 600 kg

91 = 615 kg

Ø

264

F0S1280

Example fig. 264: 175/65 R 14 82H

175 Nominal width (S, distance in mm

between sides)

WARNING Do not use air chambers

with tubeless tyres.

65 Height/width ratio (H/S), expressed

as a percentage

265) 266)

R Radial tyre

WHEEL GEOMETRY

Front wheels toe-in measured between

rims: 0.5 ± 1 mm.

The values refer to the car in running

order.

14 Rim diameter in inches (Ø)

82 Load rating (capacity)

H Maximum speed rating

Maximum speed index

Q up to 160 km/h

R up to 170 km/h

S up to 180 km/h

T up to 190 km/h

U up to 200 km/h

H up to 210 km/h

V up to 240 km/h

CORRECT READING OF

THE RIM CODE

Example fig. 264: 5,00 B x 14 H2

5.00 width of the rim in inches (1).

B drop centre outline (side projection

where the tyre bead rests) (2).

255

14 fitting diameter, expressed in inches

(corresponds to the diameter of the tyre

that should be fitted) 3 = Ø.

H2shape and number of "humps"

(circumference measurement which

keeps the bead of tubeless tyres in

position on the rim).

256

RIMS AND WHEELS PROVIDED

(according to versions/trim levels)

ꢀ

Versions

Rims

Tyres

Snow tyres

6Jx15H2-ET40

185/65 R15 88T (*)

185/65 R15 88T (M+S)

All

6Jx16H2-ET41(**)

195/55 R16 91V

195/55 R16 91H (M+S)

205/45 R17 88H (M+S)

6.5Jx17H2-ET41(**)

205/45 R17 88V (***)

(*) For versions/markets, where provided

(**) Alloy wheel rim

(***) Chains cannot be fitted

257

COLD TYRE INFLATION PRESSURE (bar)

263) 264)

When the tyres are warm, the inflation pressure should be + 0.3 bar in relation to the recommended figure. With snow tyres,

add +0.2 bar to the pressure value prescribed for other standard tyres.

However, recheck the correct value when the tyre is cold.

ꢀ

Medium load

Full load

Tyres

Front

Rear

Front

Rear

185/65 R15 88T

195/55 R16 91V

205/45 R17 88V

2.4

2.3

2.4

2.5

2.4

2.3

2.4

2.5

IMPORTANT

263) Remember that the road holding qualities of your car also depend on correct tyre pressures.

264) If tyre pressure is too low, it may overheat and be severely damaged as a result.

258

depth is below 4 mm. Replace them in

this case.

equipment; therefore their use is

equivalent to that of the snow chains.

Snow chains can be fitted to the tyres

of the front wheels (drive wheels) only.

Check the tension of the snow chains

after the first few feet/metres have been

driven.

RIM PROTECTOR TYRES

269)

Due to the specific characteristics

of snow tyres, in normal weather

conditions or on long motorway

journeys, the performance of these

tyres is lower than that of standard

tyres. Their usage should therefore be

restricted in accordance with their type

approval.

For wheel hub caps fitting on rims with

Rim Protector tyres, see the warning

below.

Using snow chains with tyres with

non-original dimensions may damage

the car. Using different size or type

(M+S, snow, etc.) tyres between

front and rear axle may adversely

affect car driveability, with the risk of

losing control of the car and resulting

accidents.

WARNING When using snow tyres

with a maximum speed index below

the one that can be reached by the car

(increased by 5%), place a notice in

the passenger compartment, plainly in

view, which states the maximum speed

allowed by the snow tyres (as per

EC Directive). All four tyres should be

the same (brand and track) to ensure

greater safety when driving and braking

as well as a good manoeuvrability.

Remember that you should not change

the rotation direction of the tyres.

265

F0S0351

SNOW TYRES

IMPORTANT

270)

Use snow tyres of the same size as the

standard tyres provided with the car.

All four tyres should be the same

(brand and track) to ensure greater

safety when driving and braking as well

as a good manoeuvrability.

265) Do not switch tyres from the

right-hand side of the car to the left-hand

side, and vice versa.

266) Never submit alloy rims to

repainting treatments requiring the use

of temperatures exceeding 150°C. The

mechanical properties of the wheels could

be impaired.

267) Remember that the road holding

qualities of your car also depend on

correct tyre pressures.

268) If tyre pressure is too low, it may

overheat and be severely damaged as a

result.

Remember that you should not change

the rotation direction of the tyres.

The Fiat Dealership will be happy to

provide advice concerning the most

suitable type of tyre for the customer's

requirements.

SNOW CHAINS

99) 100) 101)

The use of snow chains should be in

compliance with local regulations of

each country. In certain countries,

tyres marked with code M+S (Mud

and Snow) are considered as winter

The winter features of these tyres are

reduced considerably when the tread

269) Do NOT fit wheel cups when using

integral cups fixed (with springs) to the

steel rim and tyres other than factory-

fitted tyres provided with Rim Protector

259

(fig. 265). Use of unsuitable tyres and

wheel caps may cause sudden decrease

of tyre pressure.

270) The top speed for snow tyres marked

“Q” is 160 km/h, while it is 190 km/h for

“T” tyres and 210 km/h for "H" tyres.

Nevertheless, you must always comply

with the highway code speed limits.

WARNING

99) Keep the vehicle's speed down when

snow chains are fitted; never exceed 50

km/h.

100) With snow chains, use the

accelerator with extreme care to prevent,

or to limit as much as possible, slipping of

the drive wheels that could cause chain

breakage, resulting in damage to the

vehicle body or mechanical components.

101) Avoid potholes, steps and pavements

and avoid driving long distances on roads

not covered with snow to avoid damaging

the car and the road surface.

260

DIMENSIONS

Dimensions are expressed in mm and refer to the car equipped with its original tyres. Height is measured with car unladen.

BOOT CAPACITY: capacity (VDA standards): 185 litres.

266

F0S0793

ꢀ

Versions

A

B

C

D

E

F

G

I

All

3631

732

2322

577

1529

1470

1683

1460

261

WEIGHTS

ꢀ

Versions

High Range

Cabrio High Range

3+1 High Range

Unladen weight (with all fluids and without optional

equipment) (kg):

1290

1330

1325

Payload including the driver (kg) (*)

Maximum permitted load (kg) (**)

- front axle:

400

920

840

920

840

920

840

– rear axle:

– total:

1690

1730

1725

Towable loads (kg)

- braked trailer:

(***)

– non-braked trailer:

Maximum load on the ball (braked trailer) (kg):

(*) If special equipment is fitted (sunroof, etc.) the unladen car weight increases, thus reducing the specified payload in relation to the

maximum permitted loads.

(**) Loads not to be exceeded. The user should carry goods in the boot and/on load carrying platform within the maximum permitted loads.

(***) WARNING A trailer cannot be towed so there are no provisions for fitting a tow hook.

262

ꢀ

Versions

Low Range

Cabrio Low Range

3+1 Low Range

Unladen weight (with all fluids and without optional

equipment) (kg):

1180

1206

1204

Payload including the driver (kg) (*)

Maximum permitted load (kg) (**)

- front axle:

380

364

366

860

715

860

725

860

725

– rear axle:

– total:

1560

1570

Towable loads (kg)

- braked trailer:

(***)

– non-braked trailer:

Maximum load on the ball (braked trailer) (kg):

(**) If special equipment is fitted (sunroof, etc.) the unladen car weight increases, thus reducing the specified payload in relation to the

maximum permitted loads.

(***) Loads not to be exceeded. The user should carry goods in the boot and/on load carrying platform within the maximum permitted loads.

(****) WARNING A trailer cannot be towed so there are no provisions for fitting a tow hook.

263

REFUELLING

ꢀ

Quantity

Original fluids and lubricants

EDM (Electronic Drive Module) (litres):

Cooling system (litres):

0.67

PETRONAS IONA INTEGRA PLUS FCA

Mixture of demineralized water and 50%

UP

6.5

0.8

1.5

PARAFLU

(*)

Hydraulic brake circuit (kg):

TUTELA TOP EVO

Windscreen and rear window washer fluid

reservoir (litres):

Mixture of water and PETRONAS DURANCE

SC35

UP

(*) When the vehicle is used in particularly harsh weather conditions, we recommend using a 60% mixture of PARAFLU

demineralised water.

and 40%

264

FLUIDS AND LUBRICANTS

If lubricants conforming to the required specifications are not available, products that meet the indicated specifications can be

used to top up; in this case optimal performance of the concerned mechanical components is not guaranteed.

102)

^Pꢀ^{RODUCT SPECIFICATIONS}

Original fluids and

lubricants

Use

Features

Specification

Applications

Molybdenum disulphide

grease, for use at high

temperatures. N.L.G.I.

consistency 1-2.

TUTELA ALL STAR

Contractual Technical

Reference N° F702.G07

Wheel side constant

velocity joints

9.55580-GRAS II

Low friction coefficient

grease for constant

velocity joints. N.L.G.I.

consistency 0-1.

TUTELA STAR 700

Contractual Technical

Reference N° F701.C07

Lubricants and greases

for drive transmission

Differential side constant

velocity joints

9.55580-GRAS II

9.55550-MZ14

PETRONAS IONA

Transmission Lubricant

(EDM System - Electronic

Drive Module)

INTEGRA PLUS FCA

Contractual Technical

Reference N°F006.A20

SAE 75W-70, API GL-4

Protective agent with

antifreeze action with

organic formulation.

CUNA NC 956-16,

ASTM D 3306

Cooling circuits

proportions of use: 50%

UP

PARAFLU

Contractual Technical

Protective for cooling

system

9.55523 or MS.90032

9.55597 or MS.90039

demineralised water 50%

UP

Reference N° F101.M01

PARAFLU

(*)

Specifications.

Synthetic fluid for brake

systems. Exceeds

specifications: FMVSS n°

116 DOT 4, ISO 4925

Class 6, SAE J1704.

TUTELA TOP EVO

Contractual Technical

Reference N° F002.L18

Brake fluid

Hydraulic brakes

265

Original fluids and

lubricants

Use

Features

Specification

Applications

PETRONAS DURANCE

SC35 Contractual

Technical Reference N°

F001.D16

Mixture of alcohol, water

and surfactants CUNA

NC 956-II.

To be used diluted or

undiluted in windscreen

washer/wiper systems

Windscreen/rear window

washer fluid

9.55522 or MS.90043

UP

(*) When the vehicle is used in particularly harsh weather conditions, we recommend using a 60% mixture of PARAFLU

demineralised water.

IMPORTANT Do not top up or mix with other fluids which have different specifications from those described.

and 40%

WARNING

102) The use of products with different specifications than those indicated below could cause damage to the engine not covered by the

warranty.

266

PERFORMANCE

^Mꢀ^{ax. speed in km/h that can be reached after initial car use.}

Versions

Maximum speed (km/h)

High Range

Low Range

150

267

PRESCRIPTIONS FOR HANDLING THE CAR AT THE END OF ITS

LIFE

The Manufacturer has been committed for many years to safeguarding the Environment through the constant improvement of

its production processes and manufacturing products that are increasingly "eco-compatible". To grant customers the best

possible service in terms of respecting environmental laws and in response to European Directive 2000/53/EC governing

vehicles at the end of their life, the Manufacturer is offering its customers the chance to hand over their car at the end of its life

without incurring any additional costs. The European Directive sets out that when the vehicle is handed over the last keeper or

owner should not incur any expenses as a result of it having a zero or negative market value.

To hand your car over at the end of its life without extra cost, contact one of our dealerships if you are purchasing another car,

or a collection and scrapping centre authorised by the Manufacturer. These centres have been carefully chosen to offer high

quality service for the collection, treatment and recycling of vehicles at their end of life, respecting the surrounding environment.

You can find further information on these collection and scrapping centres either from a Stellantis dealership or by calling the

number in the Warranty Booklet or by consulting the websites of the various manufacturer brands.

Similarly, to meet its obligations under European Directive 2006/66/EC on batteries, the Manufacturer requires you to comply

with the national regulations on handling both low-voltage and high-voltage lithium ion batteries (12V and 48V) at all times. This

includes consigning vehicles complete with their batteries to one of the collection and demolition centres authorized by the

Manufacturer to handle such batteries, and not disposing of them improperly, which could lead to personal injuries and/or harm

to the environment.

268

TECHNICAL SPECIFICATIONS for Your Fiat 500 SUV Second Generation (2020-2025)

Popular Owner Manuals

Latest Owner Manuals