Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

PRACTICAL INFORMATION -> Towing and tow hitch for Your Fiat Doblo Van 2000-2009

Do not allow anything to  
be sprayed onto the cat-  
alytic converter, lambda  
Engage a low gear when driving  
downhill rather than constantly brak-  
ing.  
TOWING TRAILERS  
IMPORTANT NOTES  
sensor and exhaust pipe.  
The weight the trailer exerts on the  
vehicle’s tow hitch coupling reduces  
the vehicle’s payload by the same  
amount.  
The vehicle must be fitted with a ho-  
mologated tow hitch and suitable elec-  
trical system for towing a caravan or  
trailer. Installation must be carried out  
by skilled personnel who will issue  
documentation authorising circulation  
on the road.  
To make sure the maximum towable  
weight is not exceeded (given in the  
log book) account should be taken of  
the fully laden trailer, including acces-  
sories and personal belongings.  
When functioning nor-  
mally the catalytic con-  
verter reaches high tem-  
Install any specific and/or additional  
rear-view mirrors in accordance with  
the Highway Code.  
peratures. For this reason do not  
park the vehicle over inflamma-  
ble material (grass, dry leaves,  
pine needles etc.): fire hazard.  
Respect the speed limit for towing  
trailers in the country you are travel-  
ling in. In any case, do not exceed a  
maximum speed of 100 km/h.  
Remember that towing a trailer  
makes it harder for the vehicle to  
climb the maximum gradients speci-  
fied.  
Ignoring the above rules  
may lead to fire.  
DRIVING YOUR VEHICLE  
113  
The ABS system will not  
control the trailer braking  
The tow hitch must comply with the  
current regulation, with reference to  
Directive 94/20/EC and amendments.  
In addition to the electrical connec-  
tion, only the lead for powering an  
electric brake and the lead to power  
a light inside the trailer not exceed-  
ing 15W may be connected to the ve-  
hicle’s electrical system.  
system.  
Great  
care  
should therefore be taken when  
driving on slippery road surfaces.  
Install a tow hitch which is suitable  
for the towing capacity of the vehicle.  
Use a unified coupling for the elec-  
trical connections. The coupling is gen-  
erally fitted on a specific mount fas-  
tened to the tow hitch.  
For connections use the preset con-  
trol unit with battery cable no less  
than 2,5 mm2.  
Under no circumstances  
modify the vehicle’s brak-  
For electrical connection, a 7 or 13  
pole 12VDC coupling must be used  
(CUNA/UNI and ISO/DIN standards).  
Follow the instructions provided by  
the manufacturer of the vehicle and/or  
the tow hitch.  
FITTING DIAGRAM  
ing system for trailer  
The trailer tow hitch is to be fixed in  
the points indicated (see diagram fig.  
4).  
braking control. The trailer’s  
braking system must be com-  
pletely independent of the vehi-  
cle’s hydraulic system.  
The plate 1 must have a minimum  
thickness of 6 mm. The fastening  
points 2 will be equipped with shims  
’16 x 2 mm. The tow hitch structure  
is fastened in the points shown with Ø  
by means of six M8 screws and four  
M10 screws.  
Use the specific trailer light fusebox  
for electrical connections.  
An electric brake should be supplied  
directly by the battery through a cable  
with a cross section of no less than 2.5  
mm2.  
TOW HITCH INSTALLATION  
The towing device should be fas-  
tened to the body by specialised per-  
sonnel according to any additional  
and/or integrative information supplied  
by the Manufacturer of the device.  
Fasten the tow hitch to the body and  
trim the bumper with the frame pro-  
vided with the assembly kit.  
After fitting the tow hitch, the emp-  
ty vehicle weight will increase by ap-  
proximately 15.5 kg.  
DRIVING YOUR VEHICLE  
114  
After 1000 km check that the tow  
hitch fastening screws are perfectly  
closed. Have this operation carried  
out at Fiat Dealership.  
SEC. A-A  
IMPORTANT A clearly visible  
plate of a suitable size and made of  
suitable material bearing the following:  
Ground line  
MAX LOAD ON BALL COUPLING  
60 kg.  
M10 screw  
Existing  
hole  
Three M8  
screws  
Existing nuts  
M10 screw  
Existing hole  
Standard ball  
Three M8  
screws  
Existing nuts  
After assembly, seal the  
holes to prevent exhaust  
fumes from entering the  
vehicle.  
M10 screw  
Existing hole  
Existing hole  
M10 screw  
fig. 4  
DRIVING YOUR VEHICLE  
115