IMPORTANT Do not use inner
tubes with tubeless tyres.
STEERING
WHEELS
Volante ad assorbimento di energia.
Energy-absorbing jointed steering
wheel.
Permanently lubricated rack and pin-
ion.
Do not fasten alloy wheels with the
steel wheel bolts and vice versa. For
details on the compatibility between
rims and bolts, see “If a tyre is punc-
tured” in section “In an emergency”.
RIMS AND TYRES
High resistance printed steel rims of
alloy rims.
Tubeless tyres with radial carcass.
Permanent lubrication joints.
The homologated tyres are listed in
the log book.
SPARE WHEEL
Pressed steel rim.
Tubeless tyre.
Minimum steering circle: 10.5 metres
(average between versions).; 11.8 m
for Long wheelbase versions,
IMPORTANT In the event of dis-
crepancies between the information
provided in this Owner Handbook and
the Log Book, consider the specifica-
tions shown in the Log Book only.
SNOW CHAINS
STRUCTURE
Only use low profile chains, see
“Snow chains”.
Self-supporting chassis, three or five
doors, high-resistance, multiple thick-
ness structural elements for progres-
sive energy absorption in impacts.
Side bars in doors for side impact
protection and stiffening the passen-
ger compartment in the event of front
impacts.
To ensure safety of the vehicle in
movement, it must be fitted with tyres
of specified size and of the same make
and type on all wheels.
WHEEL GEOMETRY
Front wheel toe-in measured from
rim to rim: 0 1 mm.
The values refer to the vehicle in run-
ning order.
The front and rear ends of the un-
derbody crumple to reduce repair
costs following low speed impacts.
TECHNICAL SPECIFICATIONS
183
English 