SPARE WHEEL
WHEELS
Pressed steel rim Tubeless tyre.
RIMS AND TYRES
WHEEL GEOMETRY
Pressed steel or alloy rims. Tubeless ra-
dial carcass tyres. All approved tyres are
listed in the Log Book.
Toe-in measured between rims: –1
mm.
1
The values refer to the vehicle in running
order.
IMPORTANT In the event of discrepan-
cies between the information provided on
this “Owner handbook” and the “Log
book”, consider the specifications shown
in the log book only.
fig. 5
UNDERSTANDING
TYRE MARKING fig. 5
Respect the prescribed size to ensure
safety of the vehicle in movement. Fit tyres
of the same make and type on all wheels.
Example: 175/70 R 14 91T
IMPORTANT Do not use inner tubes
with Tubeless tyres.
175 = Nominal width (S, distance in mm
between sidewalls).
70 = Height/width ratio (H/S) in per-
centage.
R
= Radial tyre.
14 = Rim diameter in inches (Ø).
91 = Load rating (capacity).
T
= Maximum speed rating.
180
English 
