Get Multimedia Guide for Fiat Fiorino SUV Third Generation (2015-2026)

MULTIMEDIA

RADIO ...................................... 229

®

This chapter describes the main

functions of the radio which may be

fitted on the vehicle.

MOPAR CONNECT.................. 240

OFFICIAL TYPE APPROVALS ...... 241

228

make sure that the radio is off during

cleaning.

To enter the first digit of the code,

press the button corresponding to the

pre-selected stations (from 1 to 6).

Enter the other code digits in the same

way.

If the four digits are not entered within

20 seconds, the display shows the text

"Enter code - - - -".

RADIO

(for versions/markets, where provided)

The radio has been designed according

to the specifications of the passenger

compartment, with a personalised

design matching the style of the

dashboard perfectly.

ANTITHEFT PROTECTION

The radio is equipped with an anti-theft

protection system based on the

exchange of information between

the radio and the electronic control

unit (Body Computer) present on the

vehicle.

This system guarantees maximum

safety and prevents the secret code

from being entered each time the radio

power supply is disconnected.

If the check has a positive outcome,

the radio will start to function, whereas

if the comparison codes are not the

same or if the electronic control

unit (Body Computer) is replaced,

the device will ask the user to enter

the secret code according to the

procedure described in the paragraph

below.

TIPS

Road safety

Please, learn how to use all different

radio functions (e.g. save stations)

before beginning to drive.

If this occurs, it is not considered an

incorrect code entry.

After entering the fourth digit (within 20

seconds), the car radio will work.

If an incorrect code is entered, the

radio will emit a sound and the display

shows the text "Radio blocked/wait" to

notify the user of the need to enter the

correct code.

Each time the user enters an incorrect

code, the waiting time will gradually

increase (1 min, 2 min, 4 min, 8

min, 16 min, 30 min,1h, 2h, 4h, 8h,

16h, 24h) up to a maximum of 24

hours. The waiting time will be shown

on the display with the text "Radio

blocked/wait". After the text has

disappeared it is possible to start the

code entering procedure again.

Reception conditions

Reception conditions change

constantly while driving. Reception may

be interfered with by the presence

of mountains, buildings or bridges,

especially when you are far away from

the broadcaster.

WARNING The volume may be

increased when receiving traffic

information and news.

Entering the secret code

When the radio is switched on, if the

secret code is requested, the display

will show the word "Code" for about 2

seconds followed by four dashes "- - -

-".

The secret code is made up of four

digits from 1 to 6, each corresponding

to one of the dashes.

172)

Care and maintenance

Car radio passport

Only clean the cover with a soft, anti-

static cloth. Cleaning and polishing

products may damage the surface.

Do not use alcohol, petrol or their

derivatives to clean the display lens and

This document certifies ownership of

the car radio. The car radio passport

shows the radio model, serial number

and secret code.

229

WARNING Keep the radio passport in

a safe place so that you can give the

information to the relevant authorities

if the radio is stolen. In case of loss of

the car radio passport, contact the Fiat

Dealership, taking an ID document and

the vehicle ownership documents.

anti-theft protection system;

aerial;

radio with CD MP3 player.

WARNING

172) If the volume is too loud this could

be dangerous for the driver and for

passengers when driving in traffic. Always

adjust the volume so that you can still hear

background noises.

PROVISION

The system consists of:

radio supply leads;

front door panel speaker cables;

rear speaker cables (on the side of

the parcel shelf) (for versions/markets,

where provided);

radio housing;

antenna wires.

SYSTEM TECHNICAL

SPECIFICATIONS

The system consists of:

radio supply leads;

front door panel speaker cables;

rear speaker cables (on the side of

the parcel shelf) (for versions/markets,

where provided);

2 tweeter located on rear-view mirror

trim;

2 mid-woofer Ø130 mm located on

the door;

rear speakers (optional, for

versions/markets, where provided);

2 full-range Ø100 mm speakers

located on the parcel shelf;

230

QUICK REFERENCE GUIDE

260

F0T0016

231

^Gꢀ ^{eneral functions}

Button

Functions

Switching on

Mode

Short button/knob press

Long button/knob press

Left/right button/knob rotation

Brief button press

ON/OFF

Switching off

Volume adjustment

MUTE

FM AS

AM

Volume activation/deactivation (Mute/Pause)

FM1, FM2, FM Autostore radio source selection

MW1, MW2 radio source selection

Selction of radio/CD/CD CHANGER source

Brief cyclical button press

CD

Menu activation: push button briefly Adjustment type

selection:

Audio adjustments: low tones (BASS), high tones

(TREBLE), RH/LH balance (BALANCE), front/rear

balance (FADER)

press buttons

Adjusting the settings:

press buttons or

or

.

AUTO

MENU

.

Menu activation: push button briefly Adjustment type

selection:

press buttons

Adjusting the settings:

press buttons or

or

.

Advanced functions adjustment

.

232

^Rꢀ ^{adio functions}

Button

Functions

Mode

Automatic search:

press buttons

or

(hold the button down for

Radio station search:

Automatic search

Manual search

fast forward).

Manual search:

or

(hold the button down for

fast forward).

Store current radio station

Stored station recall

Long button press for memory preset from 1 to 6

Brief button press for memory preset from 1 to 6

1 2 3 4 5 6

CD functions

Button

Functions

Mode

CD ejection

Brief button press

Play previous/next track

Short press of buttons

Long press of buttons

or

Fast forwarding/rewinding CD track

Playing previous/next folder (for CD-MP3)

Playing previous/next folder (for CD CHANGER)

Short press of buttons

or

233

STEERING WHEEL CONTROLS

(for versions/markets, where provided)

F0T0297m

261

F0T0297

ꢀꢀ

Button

Functions

Mode

AudioMute switching on/off (Radio mode) or Pause

function (MP3 mode)

Brief button press

+

Increasing volume

Decreasing volume

Button press

–

Radio frequency range selection (FM1, FM2, FMT,

FMA, MW) and listening sources (Radio - CD - MP3

- CD CHANGER)

SRC

Button press

234

Button

Functions

Mode

Radio: recall programmed stations (from 1 to 6)

CD/CD MP3/CD CHANGER: selection of next track

Button press

Radio: pre-selected station (from 1 to 6) recall

CD/CD MP3/CD CHANGER: previous track

selection

Button press

235

GENERAL INFORMATION

The radio offers the following functions:

Radio section

Playing of audio CDs, CD-Rs and

CD-RWs.

SWITCHING OFF THE RADIO

Keep the ON/OFF button/knob

pressed.

43)

MP3 CD section

PLL tuning with FM/AM/MW

frequency bands;

SELECTING THE RADIO

FUNCTIONS

MP3-Info function (ID3-TAG);

Folder selection (previous/ next);

Track selection (forward/back);

Fast advance (forward/back) through

tracks;

MP3 Display function: display of

name of folder, ID3-TAG information,

time elapsed since the start of the

track, name of the file;

Reading of audio or data CD, CD-R

and CD-RW.

Audio section

Mute/Pause function;

Soft-Mute function;

Loudness function

7-band graphic equaliser;

Separate bass/treble adjustment

Right/left channel balance.

RDS (Radio Data System) with TA

(traffic alerts) function - TP (traffic

programmes) - EON (Enhanced Other

Network) - REG (regional programmes);

AF: search selection for alternative

frequencies in RDS mode;

automatic/manual tuning into

stations;

By pressing the FM AS button quickly

and repeatedly, the following audio

sources can be selected cyclically:

TUNER (“FM1”, “FM2”, “FMA”).

By pressing the AM button briefly and

repeatedly, the following audio sources

can be selected cyclically:

TUNER (“MW1”, “MW2”).

FM Multipath detector;

manual storing of 30 stations: 18 on

FM band (6 on FM1, 6 on FM2, 6 on

FMT), 12 on MW band;

automatic storing (AUTOSTORE

function) of 6 stations in the dedicated

FM band;

SPEED VOLUME function: automatic

volume adjustment according to the

vehicle speed;

SELECTING THE CD/CD CHANGER

FUNCTION

By briefly pressing the CD button, the

CD/CD CHANGER audio source can

be selected (only with a CD loaded).

MUTE/PAUSE FUNCTION

(setting volume to zero)

Press the MUTE button briefly to

activate the Mute function.

Press the Mute button again to

deactivate the MUTE function.

The Mute function will be overridden

when there is an incoming traffic

alert (if the TA function is on) or if an

emergency alarm is received. The

function will be reactivated when the

alert is over.

FUNCTIONS AND

ADJUSTMENTS

automatic Stereo/Mono selection.

CD section

SWITCHING ON THE RADIO

The car radio comes on when the

ON/OFF button/knob is briefly pressed.

When the radio is turned on with the

key extracted from the ignition switch,

it turns off automatically after about 20

minutes.

Direct selection of the disc;

Track selection (forward/back);

Fast advance (forward/back) through

tracks;

CD Display function: display of disc

name and time elapsed since the start

of the track

236

AUDIO SETTINGS

MENU

Press the button MENU again to exit

the Menu function.

The functions that can be selected

from the audio menu change

depending on the context:

AM/FM/CD/CD CHANGER.

Press the AUDIO button briefly to

change the Audio functions.

MENU button functions

Press the button MENU briefly to

activate the Menu function. The display

will show the first menu item that can

be adjusted (AF) ("AF Switching On" on

the display).

WARNING The AF SWITCHING,

TRAFFIC INFORMATION and

REGIONAL MODE adjustments are

only possible in FM mode.

After the AUDIO button is first pressed,

the display will show the bass level

value for the source activated at that

time (e.g. in FM mode the display will

show the wording "FM Bass +2").

Use the

or

buttons to scroll

through the menu functions. To change

the setting of the function selected use

RADIO (Tuner)

When the radio is turned on, it will

activate the last source listened to

before it was switched off: Radio, CD,

CD MP3.

To select the Radio function when

another audio source is being listened

to, briefly press the FM, AS or AM

buttons, depending on the desired

band.

the

or

buttons.

The current status of the selected

function appears on the display.

The functions managed by the Menu

are:

AF SWITCHING (alternative

frequency search) (ON/OFF);

TRAFFIC INFORMATION (ON/OFF);

REGIONAL MODE (ON/OFF);

MP3 DISPLAY (CD MP3 / CD

CHANGER data);

Use the

buttons to scroll

through the menu functions. To change

the setting of the function selected use

the

buttons.

The current status of the selected

function appears on the display.

The functions managed by the Menu

are:

BASS (adjustment of bass tones);

TREBLE (adjustment of high tones);

BALANCE (right/left balance

adjustment);

SELECTING A FREQUENCY BAND

With the Radio mode active, press

the FM, AS or AM button briefly and

repeatedly to select the desired

reception band.

Each time the button is pressed the

following bands are selected cyclically:

Pressing the FM AS button: “FM1”,

“FM2” or “FMA”;

Pressing the AM button: “MW1”,

“MW2”.

Each band is highlighted by the name

in the display. The last station selected

on the respective frequency band will

be tuned into.

SPEED VOLUME (volume change

based on speed);

RADIO ON VOLUME (radio maximum

limit on/off);

AUX OFFSET (alignment of the

portable device volume to that of the

other sources) (for versions/markets,

where provided);

RADIO OFF (switching-off mode);

SYSTEM RESET (reset of factory

settings).

FADER (front/back balance

adjustment);

LOUDNESS (LOUDNESS function

activation/deactivation);

EQUALISER (activation and selection

of factory-set equaliser levels);

USER EQUALISER (customised

equaliser setting).

237

the desired frequency band and then

press the or button briefly and

repeatedly to start to the search in

the desired direction. If the or

buttons are pressed longer, the fast

search will start and then stop when

the button is released.

band is automatically selected and the

function is performed.

PRESET BUTTONS

The buttons numbered from 1 to 6

are used to set the following preset

stations:

18 in the AM band; 6 in FM1, 6 in

FM2, 6 in FMT or "FMA" (on some

versions);

WARNING Sometimes the Autostore

function is not able to find 6 stations

with a strong signal. In this case,

the strongest stations stored will be

duplicated in the free preset buttons.

12 in the MW band.

AUTOSTORE FUNCTION

(automatic station storing)

To listen to a preset station, select the

desired frequency band and then briefly

press the corresponding preset button

(from 1 to 6).

By pressing the preset button for more

than 2 seconds, the tuned station

will be stored. The storing phase is

confirmed by an acoustic signal.

WARNING When the Autostore

function is activated, the stations that

were previously stored in the FMA band

are deleted.

To activate the Autostore function, hold

the FM AS button pressed until a beep

is heard. With this function, the radio

automatically stores the 6 stations with

the strongest signal in decreasing order

on the FMA frequency band.

During the automatic storing process,

the text “Autostore” flashes on the

display.

Press the FM AS button again to stop

the Autostore function: the radio will

again tune into the station listened to

before the activation of the function.

When the Autostore scan is concluded,

the radio will automatically tune into the

first preset station on the FMA band

(preset 1).

The stations that have a strong signal

at that moment are then automatically

stored in the preselected band in the

buttons numbered 1 to 6.

EMERGENCY ALARM RECEPTION

The radio can receive emergency

alerts in RDS mode in exceptional

circumstances or when there are

dangerous situations (earthquakes,

floods, etc.), if these are being

transmitted by the broadcaster tuned

into.

AUTOMATIC TUNING

Briefly press the

or

button to

start the automatic tuning search for

the next station that can be received in

the selected direction.

Briefly press

or

button is

This function is activated automatically

and cannot be turned off.

pressed down longer, the fast search

starts.

When the button is released, the tuner

will stop on the next station that can be

received.

If the TA function (traffic news) is on,

the tuner searches only for stations that

broadcast traffic news.

The word ALARM will be shown in

the display during the transmission of

an emergency announcement. The

volume of the radio changes during

this announcement in the same way as

during traffic news.

When the Autostore function is

activated within the MW band, the FMA

MANUAL TUNING

This is used to manually search for

stations in the preselected band. Select

238

CD PLAYER

The CD cannot be ejected if the radio is

off.

If the ejected CD is reloaded without

having removed it completely from the

slot, the radio will not switch to the CD

source.

SELECTING NEXT/PREVIOUS

FOLDER

This chapter describes the variants

regarding the operation of the CD

player only: as far as the operation of

the radio is concerned, refer to the

description in the "Functions and

Adjustments" chapter.

Press the button

to select one of

the next folders or press the

button

to select a previous folder. The display

will show the number and the name of

the folder (e.g. “DIR 2 XXXXXX”).

XXXXXX: name of the folder (the display

will only show the first 8 characters).

The folders are selected cyclically: the

first folder is selected after the last

folder and vice versa.

Possible error messages

SELECTING THE CD PLAYER

To activate the CD player built-into the

equipment, proceed as follows:

insert a CD with the equipment

switched on: the first track will start to

play;

If the loaded CD cannot be played (e.g.

a CD ROM has been inserted or the

CD is inserted the wrong way round

or there is reading error) the display

shows the words “CD Disc error”.

CD CHANGER (CDC)

44)

CD MP3 PLAYER

SELECTING MP3 SESSIONS ON

HYBRID DISCS

If a hybrid disc is inserted (Mixed Mode,

Enhanced, CD-Extra) also containing

MP3 files, the radio automatically starts

playing the audio session. It is possible

to move to the MP3 session whilst

playing by keeping the CD button

pressed for more than 2 seconds.

or

if a CD has already been loaded,

switch on the radio and then briefly

press the CD button to select the “CD”

operating mode: the last track listened

to will start to play.

This chapter only describes the

variants regarding the operation of

the CD Changer (for versions and

markets where provided); as far as the

operation of the radio is concerned,

refer to the description in the

"FUNCTIONS AND ADJUSTMENTS"

chapter.

INSERTING/ EJECTING CD

To load the CD, insert it gently into the

slot to activate the motorised loading

system, which will position it correctly.

CD CHANGER SELECTION

Turn the radio on and briefly and

repeatedly press the button CD

until the “CD CHANGER” function is

selected.

WARNING When the function is

activated the radio may take a few

seconds to start playback. Whilst

checking the disc the display will show

"CD READING". If no MP3 files are

detected, the radio will resume playing

the audio session from the point where

it was interrupted.

Press the

button with the radio on

to activate the motorised ejection of

the CD. After ejection, the last audio

source listened to before playing the

CD will be heard.

If the CD is not removed from the radio,

it will automatically be reloaded about

20 seconds later and will tune into

Tuner mode (Radio).

SELECT CD

Press button

or button

to select the next CD

to select the previous CD.

If there is no disc present in the CD

changer in the selected position, the

239

that Privacy mode has been activated

and indicating when it expires.

When you have received the

confirmation, you can start your trip

in the knowledge that the vehicle

will not be traced until the indicated

expiry time. If it expires while you are

still travelling, Privacy mode will be

extended until you turn off the engine

(instrument panel off).

If you receive a text message indicating

that your request was not successful,

you must be aware that the vehicle will

continue to be visible to the registered

customer.

If you have any doubts or problems

during activation, consult the FAQ on

the

contact the Fiat Dealership or contact

Customer Care.

words “NO CD” will appear briefly on

the display. The next disc will then

automatically be played.

You can find all the details about the

services in the Mopar Connect

section of the

portal.

PRIVACY MODE

Privacy mode lets you disable the

“Find car”, “Notify Area” and “Notify

Speed” services, which allow registered

customers to locate their cars, for a

fixed time.

®

IMPORTANT

43) Multimedia CDs include data tracks in

addition to the audio tracks. Playing this

type of CD can cause hissing at a volume

that may jeopardise road safety as well as

cause damage to the final stages and the

speakers.

44) To install and connect a Lineaccessori

CD Changer please refer exclusively to the

Fiat Dealership.

WARNING Vehicle position tracing

remains active for the assistance

services, where provided, in the event

of accident or vehicle theft, but is not

visible to the customer.

®

MOPAR CONNECT

PRIVACY MODE activation

procedure

Proceed as follows:

take note of the total odometer

reading;

make sure that the instrument panel

(where provided)

These services let you keep your

vehicle under control at all times and

receive assistance in the event of

accident, theft or breakdown.

To have these services, install the

is off;

®

Mopar Connect Device on your

Send the following text message

to +393424112613: “PRIVACY

<VEHICLE_CHASSIS_NUM>

<TOTAL_MILEAGE_KM>” (e.g.:

PRIVACY ZFA3340000P123456

12532). You can find the chassis

number in the registration document;

before starting the engine, wait to

receive the text message confirming

vehicle from the country (list available

on the )

and request activation by following

the instructions received at the email

address given when your vehicle was

handed over to you.

Download the Uconnect™ LIVE App

or access the

portal to use the connected services.

240

OFFICIAL TYPE

APPROVALS

The radio equipment supplied with

the vehicle complies with Directive

2014/53/EU, UA.RED.TR and

the French SAR Decree Law of

15/11/2019.

For more information about

certifications and open

source lists available for in-car

components use the following:

Radio frequency

devices

All radio frequency devices comply with

the regulations in force in the countries

in which they are sold.

For further information go

to or

241

Multimedia for Your Fiat Fiorino SUV Third Generation (2015-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals