Get IN AN EMERGENCY Guide for Fiat Panda SUV Second Generation (2003-2012)

IN AN EMERGENCY

A punctured tyre or a burnt-out bulb?

HAZARD WARNING LIGHTS...........106

REPLACING A BULB ......................106

REPLACING FUSES........................112

CHANGING A WHEEL ....................115

“FIX&GO AIRFLAT” KIT....................118

JUMP STARTING............................121

At times, a problem may interfere

with our journey.

The pages on emergencies can help

you to deal with critical situations

independently and with calm.

In an emergency we recommend that

you call the freephone number found in

the Warranty Booklet.

FUEL CUT-OFF SYSTEM ................122

TOWING THE VEHICLE ..................123

It is also possible to call the national or

international universal freephone

number to search for the nearest

Dealership.

105

HAZARD WARNING

LIGHTS

REPLACING A BULB

Press button A fig. 91 to switch the

lights on/off. Warning lights and in

the instrument panel are lit up when

the lights are ON.

133) 134)

50) 51)

GENERAL

INSTRUCTIONS

Before changing a bulb check the

contacts for oxidation;

IMPORTANT The use of hazard warning

lights is governed by the highway

code of the country you are driving in:

comply with legal requirements.

burnt bulbs must be replaced by

others of the same type and power;

after replacing a headlight bulb,

always check its alignment;

when a light is not working, check

that the corresponding fuse is intact

before changing a bulb. For the location

of fuses, refer to the paragraph “If a

fuse blows” in this section;

IMPORTANT When the weather is cold

or damp or after heavy rain or washing,

the surface of headlights or rear lights,

may steam up and/or form drops of

condensation on the inside. This is

a natural phenomenon due to the

difference in temperature and humidity

between the inside and the outside

of the glass which does not indicate a

fault and does not compromise the

normal operation of lighting devices.

The mist disappears quickly when the

lights are turned on, starting from

the centre of the diffuser, extending

progressively towards the edges.

F1D0023

91

Emergency braking

In the event of emergency braking the

hazard warning lights switch on

automatically as well as the

and

warning lights in the instrument

panel. The lights switch off

automatically when emergency braking

ceases.

106

Bulbs

Type

H4

Power

55 W

21 W

5 W

Dipped/main beam headlights

Front side lights/Day lights (DRL)

Rear side lights

P21/5W

PY21W

W5W

Front direction indicators

Side direction indicators

Rear direction indicators

Brake lights

21 W

5 W

PY21W

P21/5W

LED

21 W

-

Third brake light

Fog lights

H11

55 W

16 W

5 W

Reverse

W16W

C5W

Rear fog light

Number plate

107

FRONT LIGHT CLUSTERS

(except Panda Cross versions)

The bulbs are arranged inside the front

light cluster fig. 92 as follows:

A - Dipped beam/main beam

headlights/direction indicators;

B - Daytime running lights (DRL);

C - Fog lights.

F1D0117

F1D0080

93

95

DIPPED/MAIN BEAM

HEADLIGHTS

refit the new bulb on the connector

making sure that it is locked correctly,

then reinsert the connector unit and the

bulb holder B in its housing;

To replace the bulb, proceed as follows:

remove cover A fig. 94;

then refit the cover A.

DIRECTION INDICATORS

Front

To replace the bulb, proceed as follows:

F1D0134

92

FRONT LIGHT CLUSTERS

(Panda Cross versions)

remove cover B fig. 94;

turn the bulb holder anticlockwise,

extract the bulb and replace it;

On the Panda Cross versions, the bulbs

are arranged inside the front light

cluster fig. 93 as follows:

refit the new bulb on the connector

making sure that it is locked correctly,

then reinsert the connector in its

housing rotating it clockwise;

Side

A - Dipped beam/main beam

headlights/direction indicators;

B - Fog lights;

F1D0079

94

push the connector + bulb holder

unit B fig. 95 downwards;

C - Daytime Running Lights (DRL).

To replace the bulb, proceed as follows:

remove the bulb C from connector D

and replace it;

adjust the lens A fig. 96 to

compress in the clip B, then pull the

cluster outwards;

108

turn the bulb holder C anticlockwise,

extract the bulb and replace it;

refit the bulb holder C in the lens and

turn it clockwise;

refit the unit making sure that the

internal clip B clicks into position.

F1D0082

F1D0118

97

99

lift the lever A fig. 100 and

disconnect the connector B from the

bulb-bulb holder assembly C;

F1D0081

96

FOG LIGHTS

(for versions/markets, where provided -

except Panda Cross versions)

F1D0083

98

To replace the bulb, proceed as follows:

FOG LIGHTS

(Panda Cross versions)

steer the wheel completely inwards,

adjust the screws A fig. 97 and remove

the flap B;

F1D0119

100

To change the fog light bulb, proceed

as follows:

adjust the clip C fig. 98 and

disconnect the electrical connector D;

replace the bulb-bulb holder

assembly C;

reconnect the assembly to

steer both the wheels completely,

loosen the screws A fig. 99 and remove

the guard flap B;

rotate and remove the bulb holder E,

release and replace the bulb;

connector B, reposition assembly C in

its housing by rotating it clockwise

by a quarter of a turn, until it clicks into

the correct position;

locate the fog light unit, rotate it

anticlockwise by a quarter of a turn and

remove it;

refit the new lamp and carry out the

procedure described previously in

reverse.

109

reposition the guard door B fig. 99,

taking care that the tabs are positioned

in their housings and tighten the fixing

screws A.

DAYTIME RUNNING

LIGHTS (DRL)

(Panda Cross versions)

IMPORTANT To change LED DRLs

contact a Fiat Dealership.

SIDE LIGHTS/DAYTIME

RUNNING LIGHTS (DRL)

(for versions/markets, where provided -

except Panda Cross versions)

REAR LIGHT CLUSTERS

These contain the bulbs for the side

lights, brake lights and direction

indicators.

To replace the bulb, proceed as follows:

steer the wheel completely, adjust

the screws A fig. 97 and remove the

flap B;

To replace the bulb proceed as follows:

undo the two screws A fig. 102

from their seats, pull gently outwards

until releasing the whole headlight from

the two clips (press-fitted D fig. 103 )

and release the connector;

adjust the clip C fig. 101 and

disconnect the electrical connector D;

F1D0085

102

refit the new lamp and carry out the

procedure described previously in

reverse.

F1D0084

101

REVERSING LIGHT/REAR

FOG LIGHT

rotate and remove the bulb holder E,

release and replace the bulb;

F1D0086

103

135)

The reversing lights and rear fog lights

are located in the rear bumper.

To replace the bulb, proceed as follows:

refit the new lamp and carry out the

procedure described previously in

reverse.

undo the five screws B from their

seats and remove the bulb holder C;

remove the bulbs, pushing them

slightly and turning them anti-

clockwise;

adjust the tabs A and remove the

flap B fig. 104

110

THIRD BRAKE LIGHTS

Insert the new bulb and make sure

that it is correctly clamped between the

contacts, then refit the lens A fig. 107.

These are located in the tailgate and

are LED lights. For replacement,

contact a Fiat Dealership.

WARNING

NUMBER PLATE LIGHTS

To replace the bulbs proceed as

follows:

133) Modifications or repairs to the electric

system that are not carried out properly

or do not take the system technical

specifications into account can cause

malfunctions leading to the risk of fire.

remove lens A fig. 106;

F1D0087

104

adjust the clip C fig. 105 and

disconnect the electrical connector D;

134) Halogen bulbs contain pressurised

gas; in the case of breakage they may

burst.

135) Before replacing the bulb, wait for the

catalytic converter to cool down: RISK

OF BURNS.

WARNING

F1D0089

106

50) Halogen bulbs must be handled by

holding the metallic part only. Touching the

transparent part of the bulb with your

fingers may reduce the intensity of the

emitted light and even reduce the lifespan

of the bulb. In the event of accidental

contact, wipe the bulb with a cloth

moistened with alcohol and let the bulb

dry.

replace the bulb A fig. 107, releasing

it from the side contacts;

F1D0088

105

turn the bulb holder E and remove it,

extract the bulb and replace it;

refit the new lamp and carry out the

procedure described previously in

reverse.

51) If possible, we recommend to have

bulbs replaced by a Fiat Dealership. The

correct operation and alignment of the

external lights are absolutely essential for

the safety of the vehicle and of compliance

with the law.

F1D0090

107

111

DASHBOARD FUSE BOX

REPLACING FUSES

The fuse box fig. 109 is located near

the left side of the steering column and

the fuses can be accessed easily from

the lower part of the dashboard.

136) 137) 138) 139) 140) 141)

52)

GENERAL INFORMATION

To facilitate fuse replacement, use the

pliers hooked inside the fuse box lid on

the dashboard left-hand side.

ENGINE COMPARTMENT

JUNCTION BOX

The fuse box is located next to the

battery: to access the fuses, undo

screw A fig. 108, and lift cover B

upwards.

F1D0093

109

F1D0091

108

The number identifying the electrical

component corresponding to each fuse

is shown on the cover. After replacing

the fuse, make sure you close cover

B on the junction unit.

112

ENGINE COMPARTMENT JUNCTION BOX

fig. 108

USERS

FUSE

F01

F08

F09

F10

F14

F15

F19

F20

F21

F30

F87

F88

F89

F90

AMPERE

Body Computer node

Passenger compartment fan

Front fog lights

60

40

15

70

7.5

15

5

Horns

Main beam headlights

Heated windscreen

Air conditioning compressor

Front power socket (with or without cigar lighter)

Fuel pump

Blow-by

5

+15 (*) reversing lights

Mirror demisting

7.5

30

5

Heated rear window

Battery charge status sensor

(*)+15 = ignition-operated positive pole

113

DASHBOARD FUSE BOX

fig. 109

USERS

FUSE

AMPERE

F13

5

+15 (*) headlight alignment corrector

+15 (*) Ignition-operated control with inhibition during

engine starting

F31

5

F36

F37

F38

F43

F47

F48

F49

F50

F51

F53

10

7.5

20

7.5

5

+30 (**)

+15 (*) brake pedal switch (NO)

Central door locking

Two-way windscreen washer pump

Front electric window (driver side)

Front electric window (passenger side)

+15 (*)

7.5

+30 (**)

(*)+15 = ignition-operated positive pole

(**)+30 = battery direct positive pole (not ignition-operated)

114

CHANGING PROCEDURE

CHANGING A WHEEL

WARNING

Proceed as follows:

142) 143) 144) 145) 146)

stop the car in a position that is not

dangerous for oncoming traffic where

you can change the wheel safely. The

ground must be flat and sufficiently

compact;

JACK

136) If the replaced fuse blows again,

contact a Fiat Dealership.

Important notes:

the jack weight is 1.76 kg;

the jack requires no adjustment;

137) Never replace a fuse with metal wires

or anything else.

138) Never replace a fuse with another

with a higher amp rating; DANGER OF

FIRE.

switch off the engine, pull up the

handbrake and engage the 1^stgear or

reverse. Wear the reflective safety

jacket (compulsory by law) before

getting out of the vehicle;

the jack cannot be repaired and in

the event of a fault it must be replaced

by another original one;

139) If a general fuse (MEGA-FUSE,

MIDI-FUSE, MAXI-FUSE) blows contact a

Fiat Dealership.

no tool other than its cranking

device may be fitted on the jack.

140) Before replacing a fuse, make sure

that the ignition key has been removed and

that all the other services are switched off

and/or disengaged.

open the luggage compartment, pull

tab A fig. 110 and lift up the mat;

Jack maintenance

prevent any dirt from depositing on

the "worm screw";

141) Contact Fiat Dealership if a safety

system (airbags, brakes), engine system

(engine, gearbox) or steering system

general protection fuse blows.

keep the "worm screw" lubricated;

never modify the jack.

Conditions in which not to use the

jack

temperature below -40°C

on sandy or muddy ground

on uneven ground

WARNING

52) If you need to wash the engine

compartment, take care not to directly hit

the fuse box and the window wiper motors

with the water jet.

F1D0072

110

on steep roads

in extreme weather conditions:

thunderstorms, typhoons, hurricanes,

blizzards, storms, etc.

in direct contact with the engine or

to carry out repairs under the vehicle

on boats.

115

using the wrench A fig. 111 located

in the tool box, loosen the locking

device, take the tool box B and place it

close to the wheel to be replaced.

Then take the space-saver wheel C.

For the Panda VAN and Panda 4x4

versions, the jack and the tools can be

located under the passenger side

front seat;

position the jack under the vehicle,

near the wheel to be changed;

fit handle D fig. 113 into the housing

in device A, operate the jack and raise

the vehicle until the wheel is a few

centimetres from the ground;

operate the device A fig. 113 to

extend the jack until the top of the jack

B fig. 114 fits correctly into the side

remove the wheel cap after

loosening the 3 fixing bolts and finally

loosen the fourth bolt and extract

the wheel (only for versions with wheel

caps fixed by bolts);

member C (next to the mark

side member);

on the

make sure the contact surfaces

between space-saver wheel and hub

are clean so that the fastening bolts will

not come loose;

fit the space-saver wheel by

inserting the first bolt for two threads

into the hole closest to the valve;

take the wrench A fig. 112 and fully

tighten the fixing bolts;

F1D0075

113

F1D0073

111

operate the jack handle D fig. 113 to

lower the car. Then extract the jack;

take the wrench A fig. 112 and

loosen the fixing bolts by about one

turn;

53)

use the wrench A fig. 112 to fully

tighten the bolts, passing alternately

from one bolt to the opposite one;

when replacing an alloy wheel rim it

is advisable to place it upside down,

with the aesthetic part facing upwards.

F1D0076

114

alert any bystander that the vehicle

is about to be raised; all persons should

be kept away from the vehicle and

nobody must touch it until it has been

lowered;

F1D0074

112

116

REFITTING THE

STANDARD WHEEL

use the wrench provided to fully

tighten the bolts, passing alternately

from one bolt to the opposite one.

WARNING

54)

Following the procedure described

previously, raise the vehicle and remove

the space-saver wheel.

reinsert the press-fitted hub cap,

making sure that the reference hole on

the wheel is aligned with the reference

pin on the cap.

142) The space-saver wheel (for

versions/markets where provided) is

specific to your car, do not use it on other

models, or use the space-saver wheel

of other models on your car. The

Versions with steel wheels

Proceed as follows:

space-saver wheel must only be used in

the event of an emergency. Never use it for

more than strictly necessary and never

exceed 80 km/h. On the space-saver

wheel there is an orange label,

summarising the main warnings regarding

space-saver wheel usage restrictions.

Never remove or cover the label. The label

contains the following indications in four

languages: "Warning! For temporary use

only! 80 km/h max! Replace with standard

wheel as soon as possible. Never cover

this indication." Never apply a wheel cap

on a space-saver wheel.

make sure the contact surfaces

between standard wheel and hub are

clean so that the fastening bolts will not

come loose;

IMPORTANT If it is not fitted properly,

the hub cap may detach itself when the

vehicle is running.

At the end of operation

stow the space-saver wheel in the

compartment provided in the luggage

compartment;

fit the standard wheel by inserting

the first bolt by 2 threads into the hole

closest to the inflation valve;

fit the hub cap, aligning the crescent

hole with the bolt already fitted, then

fit the other bolts;

insert the jack and the other tools in

the container;

arrange the container and tools on

the space-saver wheel;

using the wrench provided, tighten

the fastening bolts;

143) Alert other drivers that the car is

stationary in compliance with local

correctly reposition the boot mat.

lower the vehicle and remove the

jack;

regulations: hazard warning lights, warning

triangle, etc. Any passengers on board

should leave the car, especially if it is

heavily laden. Passengers should stay

away from on-coming traffic while the

wheel is being changed. On hills or uneven

roads, use chocks or appropriate objects

to block the wheels of the vehicle.

use the wrench provided to fully

tighten the bolts, passing alternately

from one bolt to the opposite one.

Versions with alloy wheels

Proceed as follows:

insert the wheel on the hub and

using the wrench provided tighten the

bolts;

lower the vehicle and remove the

jack;

117

144) The vehicle's driving characteristics

will be modified with the space-saver wheel

fitted. Avoid violent acceleration and

146) If the hub cap is not fitted correctly, it

may come off when the car is travelling.

Never tamper with the inflation valve. Never

introduce tools of any kind between rim

and tyre. Check tyre and space-saver

wheel pressures regularly, complying with

the values given in the "Technical

“Fix&Go Airflat” kit

braking, abrupt steering and fast cornering.

The overall duration of the space-saver

wheel is about 3000 km, after which the

relevant tyre must be replaced with another

one of the same type. Never install a

traditional tyre on a rim designed to be

used as a space-saver wheel. Have the

wheel repaired and refitted as soon as

possible. Using two or more space-saver

wheels at the same time is forbidden.

Do not apply grease to the bolt threads

before fitting: they could come unscrewed.

The kit is located in the luggage

compartment under the load platform

cover.

specifications" chapter.

The kit is composed of:

a spray bottle A fig. 115 with the

sealant, equipped with filling pipe B,

separated by the compressor C;

WARNING

compressor C with pressure gauge,

fitting valve to couple the bottle A,

cable with supply socket D and pipe E

to restore pressure (this is inside the

body as shown);

53) When turning the jack handle make

sure that it can turn freely without scraping

your hand against the ground. The moving

components of the jack ("worm screw"

and joints) can also cause injuries: avoid

touching them. If you come into contact

with lubricating grease, clean yourself

thoroughly.

145) The jack is a tool developed and

designed only for changing a wheel, if a

tyre gets punctured or damaged, on the

vehicle with which it is supplied or on other

vehicles of the same model. Any other

use, e.g. to jack up other vehicle models or

different things, is strictly prohibited. Never

use for maintenance or repair activities

under the car or to exchange the

adhesive label on the spray bottle A,

with the message "max. 80 km/h" to

be placed where the driver can easily

see it (for example on the dashboard)

after repairing the tyre;

54) Contact a Fiat Dealership as soon as

possible to have the correct tightening

of the wheel bolts checked.

summer/winter wheels and vice versa.

Never go under the raised vehicle. If any

work under the vehicle is necessary,

contact the Fiat Service Network. Incorrect

positioning of the jack may cause the

raised vehicle to fall: use only in the

positions indicated. Do not use the jack for

loads higher than the one shown on its

label. Never start the engine with vehicle

raised. If the vehicle is raised more than

necessary, everything can become more

unstable, with the risk of the vehicle

dropping violently. Thus, lift the vehicle only

as needed in order to access the spare

wheel.

instruction booklet, explaining the

quick and correct use of the Fix&Go;

a pair of protective gloves.

118

Move the on-off button A fig. 117 to

the on I position to switch on the

compressor. When the pressure gauge

F fig. 116 indicates the right pressure

for the car, switch off the compressor

by moving the on-off button A to the

0 position. If the pressure gauge F

indicates a pressure lower than 1.8 bar

/ 26 psi 5 minutes after starting the

compressor, switch off the compressor,

disconnect the sealing fluid tube C

(fig. 116) from the tyre valve, retighten

the valve cap and move the car about

10 metres to distribute the sealing

fluid in the tyre. Stop the car safely and

repeat the operation above until the

required pressure is reached. If after

other 5 min. from the compressor

ignition, the pressure gauge F

A

B

C

F

D

F1D0147

115

TYRE REPAIRING AND

PRESSURE RESTORING

PROCEDURE

55) 56)

147)

E

Proceed as follows:

Position the vehicle in a safe and

suitable area and engage the

F1D0148

116

handbrake. Take the kit. Open the

cover D (fig. 116) of the compressor B

and insert the sealant cartridge A in

its compartment, pressing firmly

downwards. Remove the adhesive

speed label and apply it in a visible

position. Wear the protective gloves

provided. Remove the valve cap E from

the punctured tyre and connect and

firmly tighten the transparent sealing

fluid tube C.

still indicates a pressure lower than 1.8

bar / 26 psi, the TYRE IS TOO

DAMAGED AND CANNOT BE

REPAIRED. Disconnect, put the kit

back in its compartment and call

roadside assistance.

F1D0149

117

Ensure that the on-off button A (fig.

117) is in the off 0 position. Insert the

electrical connector D fig. 115 in the

car’s 12V socket.

119

If the required pressure is reached,

continue driving. Do not exceed

80 km/h. Avoid sudden acceleration or

braking. After driving for about 8 km /

5 miles, position the vehicle in a safe

and suitable area and engage the

handbrake. Take the kit, ensure that the

on-off button A (fig. 117) is in the 0

position and insert the electrical

connector in the car’s 12V socket.

Remove the repaired tyre’s valve cap,

take out the black inflation tube and

screw it firmly onto the valve. Inspect

the pressure gauge F to check the tyre

pressure.

PRESSURE RESTORING

Take out the black inflation tube and

screw it firmly onto the tyre valve. Press

the button B fig. 118 to adjust any

tyre overpressure.

WARNING

147) The information required by the

applicable regulation is indicated on the

Fix&Go kit package label. Compliance with

the indications on the label is an essential

condition to ensure the safety and the

effectiveness of the Fix&Go kit. Carefully

read the label before use, avoid improper

use. Fix&Go is subject to expiration and

must be replaced periodically. The kit

should be used by adults and cannot be

used by children.

CARTRIDGE

REPLACEMENT

Only use Fix&Go original cartridges

which can be purchased at Fiat

Dealership. Press the release button C

and lift it to remove the cartridge A

fig. 118. Insert the new cartridge and

press it firmly downwards.

WARNING

If the pressure is lower than 1.8 bar /

26 psi, the TYRE IS TOO DAMAGED

AND CANNOT BE REPAIRED.

Disconnect, put the kit back in its

compartment and call roadside

assistance.

55) Show the package and the label to the

personnel charged with handling the tyre

treated with the tyre repair kit.

56) Fix&Go provides a temporary repair,

therefore the tyre must be examined and

repaired by a specialist as soon as

possible. The sealing fluid is effective at

temperatures between -40°C and +50°C. It

is possible to repair tyres which have

been damaged on tread up to a diameter

of 4mm; however, tyres damaged on

their side cannot be repaired. Before using

Fix&Go kit, ensure that the tyre isn't

excessively damaged and that the rim is in

good condition, otherwise do not use it

and call roadside assistance. Do not

remove foreign bodies from the tyre. Do

not let the compressor turned on for more

than 20 consecutive minutes - overheating

hazard.

If the pressure is equal to or higher

than 1.8 bar / 26 psi, switch on the

compressor to reach the required

pressure. Disconnect and replace the

kit in the specific compartment. Drive

carefully to a specialist or the

F1D0150

118

manufacturer’s dealership as soon as

possible.

120

engage the handbrake, move the

Dualogic gear lever to P (Park) or,

for versions with manual gearbox, to

neutral and bring the ignition key to

STOP;

connect the other end of the cable

used for positive (+) to the positive

terminal (+) of the auxiliary battery;

JUMP STARTING

If the battery is flat, a jump starting can

be performed using the battery and

the cables of another vehicle, or using a

booster battery.

connect one end of the cable used

for negative (–) to the negative terminal

(–) of the auxiliary battery;

switch off all the other electrical

devices in the vehicle;

Connect the other end of the cable

used for negative (–) to an engine

earth (the visible metal part of

the vehicle engine with flat battery)

away from the battery and the fuel

injection system;

if another vehicle is ready for jump

starting, park the vehicle within the

reach of the cables to be used for

starting, operate the handbrake and

make sure that the ignition is

deactivated.

IMPORTANT

When a booster battery is used, comply

with the utilisation and precaution

instructions specified by the producer.

Do not use the booster battery or

any other source of external supply with

a voltage above 12 V: the battery, the

starter, the alternator and the electrical

system of the vehicle could be

damaged.

start the vehicle engine with the

auxiliary battery, let it run for a few

minutes at idling. Start the engine of the

vehicle with flat battery.

IMPORTANT Avoid contact between

the two vehicles since this could cause

a connection to earth and may result

in serious injury to any people nearby.

Cable disconnection

Do not attempt jump starting if the

battery is frozen. The battery could

break and explode!

Once the engine has been started,

remove the cables proceeding as

follows:

PROCEDURE FOR JUMP

STARTING

IMPORTANT If the procedure below is

carried out incorrectly, it can cause

severe injury to people or damage the

recharging system of one or both

vehicles. Carefully follow the

PREPARATION TO JUMP

STARTING

disconnect the end of the cable

used for negative (–) from the engine

earth of the vehicle with flat battery;

148) 149)

57) 58)

disconnect the other end of the

cable used for negative (–) from the

negative terminal (–) of the auxiliary

battery;

IMPORTANT The positive terminal (+) of

the battery is shielded by a protective

cover. Lift the cover to access the

positive terminal.

instructions given below.

Cable connection

disconnect the end of the cable

used for positive (+) from the positive

terminal (+) of the auxiliary battery;

Proceed as follows to carry out a jump

starting:

Proceed as follows:

connect one end of the cable used

for positive (+) to the positive terminal

(+) of the vehicle with flat battery;

121

disconnect one end of the cable

used for positive (+) from the positive

terminal (+) of the vehicle with flat

battery;

FUEL CUT-OFF

SYSTEM

WARNING

150)

57) Do not connect the cable to the

negative terminal (–) of the flat battery. The

following spark could lead to battery

explosion and cause serious harm. Only

use the specific earth point; do not use any

other exposed metallic part.

This intervenes in the case of an impact

causing:

If it is often necessary to perform a

jump starting, have the vehicle battery

and the recharging system checked

by a Fiat Dealership.

the interruption of the fuel supply

with the engine consequently cutting

out;

58) Never use a fast battery-charger to

start the engine as this could damage the

electronic systems of your vehicle,

particularly the ignition and engine fuel

supply control units.

IMPORTANT Any accessories (e.g.

mobile phones, etc.) connected to the

vehicle power sockets draw current

even if they are not used. These

the automatic unlocking of the

doors;

the automatic switching on of the

interior lights

devices, if left connected too much time

with engine off, may cause the battery

to drain with following reduction of

its life and/or failure to start the engine.

the switching on of the hazard

warning lights.

IMPORTANT Carefully check the car for

fuel leaks, for instance in the engine

compartment, under the car or near the

tank area. After an impact, turn the

ignition key to STOP to prevent the

battery from running down.

WARNING

148) This procedure must be performed by

qualified personnel as incorrect actions

may cause high-intensity electrical

discharge. Furthermore, battery fluid is

poisonous and corrosive: avoid contact

with skin and eyes. Keep naked flames and

lighted cigarettes away from the battery

and do not cause sparks.

To restore the correct operation of the

car, proceed as follows:

turn the ignition key to the MAR

position;

activate the right direction indicator;

deactivate the right direction

indicator;

149) Remove any metal objects (e.g. rings,

watches, bracelets), that might cause an

accidental electrical contact and cause

serious injury.

activate the left direction indicator;

deactivate the left direction indicator;

activate the right direction indicator;

122

deactivate the right direction

indicator;

TOWING THE

VEHICLE

activate the left direction indicator;

deactivate the left direction indicator;

151) 152) 153) 154) 155)

The tow hook, which is supplied with

the vehicle, is housed in the tool box,

under the carpet in the luggage

compartment.

turn the ignition key to STOP and

then to MAR.

LPG versions: in the event of an

impact, petrol supply is immediately

cut-off, the LPG safety valves are

closed and the injection is interrupted,

switching off the engine.

ATTACHING THE TOW

HOOK

F1D0095

120

Manually remove cap A fig. 119 (front

bumper) or A fig. 120 (rear bumper),

pressing the lower part, take the tow

hook B from its housing in the tool box

and tighten it completely on the front

or rear threaded pin.

Versions with Dualogic gearbox

Natural Power versions: in the event

of an impact, the power supply is

immediately cut off, causing engine

switching off.

Make sure that the gearbox is in neutral

(N) (checking that the vehicle moves

when pushed) and proceed in the same

way as for towing a normal vehicle

with a manual gearbox. If the gearbox

cannot be put in neutral, do not tow the

vehicle and contact a Fiat Dealership.

WARNING

150) If, after an impact, you smell fuel or

notice leaks from the fuel system, do

not reactivate the system to avoid the risk

of fire.

Panda Cross and Panda 4x4

versions

The vehicle can only be towed in one of

the following ways (and always with

the engine off, gear set to neutral and

handbrake released):

F1D0094

with all the wheels on the road

surface;

119

with the front (or rear) wheels raised

or resting on an emergency vehicle

and the rear (or front) wheels resting on

a specific trolley;

123

153) Whilst towing, remember that as the

assistance of the brake servo and the

electric power steering is not available,

greater force needs to be exerted on the

brake pedal and more effort is required on

the steering wheel. Do not use flexible

cables when towing and avoid jerky

movements. While towing, make sure that

the trailer hitch does not damage any

components it is touching. When towing

the vehicle, you must comply with all

specific traffic regulations, both in terms of

the towing device and behaviour on the

road. Do not start the engine while towing

the vehicle.

loaded on the flatbed of the rescue

vehicle with all the wheels on the

flatbed.

IMPORTANT For Panda Cross versions,

the tow hooks A fig. 121 the vehicle is

equipped with can only be used for

towing it in an emergency.

154) The front and rear tow hooks should

be used only for emergencies on the road.

You are allowed to tow the vehicle for

short distances using an appropriate

device in accordance with the highway

code (a rigid bar), to move the vehicle on

the road in readiness for towing or

F1D0120

121

transporting via a breakdown vehicle. Tow

rings MUST NOT be used to tow vehicles

off the road or where there are obstacles

and/or for towing operations using cables

or other non-rigid devices. In compliance

with the above conditions, towing must

take place with the two vehicles (one

towing, the other towed) aligned as much

as possible along the same centre line.

WARNING

151) Before starting towing operations,

turn the ignition key to MAR and then

to STOP, without extracting it. The steering

column will automatically lock when the

key is removed and the wheels cannot be

steered.

155) Do not use tow hooks for securing the

vehicle on ships.

152) Before tightening the ring clean the

threaded housing thoroughly. Make sure

that the ring is fully fastened in the housing

before towing the vehicle.

124

IN AN EMERGENCY for Your Fiat Panda SUV Second Generation (2003-2012)

Related Topics

Popular Owner Manuals

Latest Owner Manuals