Get MULTIMEDIA Guide for Fiat Panda SUV Second Generation (2003-2012)

MULTIMEDIA

RADIO.............................................177

UCONNECT RADIO ........................185

This chapter describes the main

functions of the radio and of the

Uconnect Radio that may be fitted on

the vehicle.

176

If the check has a positive outcome, the

radio will start to function, whereas if

the comparison codes are not the

same or if the electronic control unit

(Body Computer) is replaced, the

device will ask the user to enter the

secret code according to the procedure

described in the paragraph below.

Each time the user enters an incorrect

code, the waiting time will gradually

increase (1 min, 2 min, 4 min, 8 min, 16

min, 30 min,1h, 2h, 4h, 8h, 16h, 24h)

up to a maximum of 24 hours.

RADIO

178) 179) 180) 181) 182) 183)

The radio has been designed according

to the specifications of the passenger

compartment, with a personalised

design matching the style of the

dashboard perfectly.

The waiting time will be shown on the

display with the text "Radio blocked/

wait". After the text has disappeared it

is possible to start the code entering

procedure again.

TIPS

Entering the secret code

Road safety

When the radio is switched on, if the

password is requested, the display will

show "Radio code" for about 2

seconds, followed by four dashes "- - -

-".

Please, learn how to use all different

radio functions (e.g. save stations)

before beginning to drive.

Vehicle radio passport

This document certifies the ownership

of the vehicle radio. The radio passport

shows the radio model, serial number

and secret code.

Care and maintenance

The secret code is made up of four

digits from 1 to 6, each corresponding

to one of the dashes.

Clean the cover with a soft anti-static

cloth only. Cleaning and polishing

products may damage the surface.

IMPORTANT Keep the radio passport in

a safe place so that you can give the

information to the relevant authorities if

the radio is stolen.

To enter the first digit of the code, press

the button corresponding to the

pre-selected stations (from 1 to 6).

Enter the other code digits in the same

way.

ANTITHEFT PROTECTION

The radio is equipped with an anti-theft

protection system based on the

exchange of information between the

radio and the electronic control unit

(Body Computer) present on the

vehicle.

In the case of loss of the vehicle radio

passport, contact the Fiat Dealership,

taking an ID document and the vehicle

ownership documents.

If the four digits are not entered within

20 seconds, the display shows the text

"Enter code - - - -". If this occurs, it is

not considered an incorrect code entry.

After entering the fourth digit (within

20 seconds), the car radio will work.

If an incorrect code is entered, the radio

will emit a sound and the display

shows the text "Radio blocked/wait" to

notify the user of the need to enter

the correct code.

This system guarantees maximum

safety and prevents the secret code

from being entered each time the radio

power supply is disconnected.

177

QUICK GUIDE

F1D0695

134

178

General functions

Button

Functions

Mode

Ignition

short button press

LH/RH knob rotation

Switching off

Volume adjustment

FM AS

AM

FM1, FM2, FM Autostore radio source selection

MW1, MW2 radio source selection

CD source selection

short cyclical button press

MEDIA

Volume activation/deactivation (Mute/Pause)

Short button press

Audio adjustments: low tones (BASS), high tones

(TREBLE), RH/LH balance (BALANCE), front/rear

balance (FADER)

Menu activation: short button press

Adjustment type selection: press

or

buttons.

Value adjustment: press

or

Menu activation: short button press

Adjustment type selection: press

MENU

Advanced functions adjustment

or

buttons.

Value adjustment: press

or

.

Radio functions

Button

Functions

Mode

Automatic search: press

or

buttons (hold the

Radio station search:

Automatic search

button down for fast forward)

Manual search: press or

down for fast forward)

buttons (hold the button

Manual search

Store current radio station

Long button press for memory preset from 1 to 6

Brief button press for memory preset from 1 to 6

1 2 3 4 5 6

Stored station recall

.

179

CD functions

Button

Functions

Mode

CD ejection

Short button press

Play previous/next track

Brief press of

Long press of

or

buttons

Fast forwarding/rewinding CD track

Playing previous/next folder (for CD-MP3)

Brief press of

or

buttons

180

GENERAL INFORMATION

CD Display function: display of disc

name and time elapsed since the

start of the track

FUNCTIONS AND

ADJUSTMENTS

The radio offers the following functions:

Radio section

Turning the car radio on

Playing of audio CDs, CD-Rs and

CD-RWs.

PLL tuning with FM/AM/MW

frequency bands;

The car radio comes on when the

(ON/OFF) button/knob is pressed

briefly.

MP3 CD section

RDS (Radio Data System) with TA

(traffic alerts) function - TP (traffic

When the radio is turned on with the

key extracted from the ignition switch, it

turns off automatically after about 20

minutes. After the radio has switched

itself off automatically it can be turned

on for a further 20 minutes by pressing

MP3-Info function (ID3-TAG);

Folder selection (previous/next);

Track selection (forward/back);

programmes) - EON (Enhanced Other

Network) - REG (regional programmes);

AF: search selection for alternative

frequencies in RDS mode;

Fast advance (forward/back) through

tracks;

provision for emergency alarm;

MP3 Display function: display of

name of folder, ID3-TAG information,

time elapsed since the start of the

track, name of the file

the

(ON/OFF) button/knob.

automatic/manual tuning into

stations;

Turning the car radio off

Briefly press the

button/knob.

(ON/OFF)

FM Multipath detector;

manual storing of 30 stations: 18 on

FM band (6 on FM1, 6 on FM2, 6 on

FMT), 12 on MW band (6 on MW1,

6 on MW2);

Playing of audio or data CD, CD-R

and CD-RW.

Volume adjustment

Audio section

Turn the (ON/OFF) button/knob to

adjust the volume.

Mute/Pause function;

Soft-Mute function;

automatic programming (Autostore

function) of 6 stations on dedicated

FM band

If the volume level is changed during

the transmission of traffic news, the

new setting will only be maintained until

the news is finished.

Loudness function

7-band graphic equaliser;

Separate bass/treble adjustment

Right/left channel balance.

SPEED VOLUME function:

automatic volume adjustment

according to the vehicle speed;

MUTE/Pause function

automatic Stereo/Mono selection.

(setting volume to zero)

Press the button briefly to activate

the Mute function. The volume will

gradually decrease and the words

"RADIO Mute" will be displayed (in radio

mode) or "PAUSE" (in CD mode).

CD section

Direct selection of the disc;

Track selection (forward/back);

Fast advance (forward/back) through

tracks;

181

Press the button again to deactivate

the Mute function. The volume will

gradually increase until it reaches the

level set previously.

EQUALISER: activation and

selection of factory-set equaliser levels;

RADIO ON VOLUME: maximum

radio volume limit activation/

deactivation.

USER EQUALISER: customised

equaliser setting.

RADIO OFF: off mode selection.

SYSTEM RESET: reset of factory

settings.

Audio settings

MENU

MENU button function

The functions that can be selected from

the audio menu change depending on

the context: AM/FM/CD.

Press the button MENU again to exit

the Menu function.

Press the button MENU briefly to

activate the Menu function. The display

will show the first menu item that can

be adjusted (AF) ("AF Switching On" on

the display).

Press the button briefly to change

the Audio functions.

Note The AF SWITCHING, TRAFFIC

INFORMATION and REGIONAL MODE

adjustments are only possible in FM

mode.

After the

button is first pressed, the

display will show the bass level value

for the source activated at that time

(e.g. in FM mode the display will show

the wording "FM Bass +2").

Use the

or buttons to scroll

through the Menu functions. To change

the setting of the function selected

use the or buttons.

RADIO (Tuner)

To select the Radio function when

another audio source is being listened

to, briefly press the FM, AS or AM

buttons, depending on the desired

band.

Use the or buttons to scroll

through the menu functions. To change

the setting of the function selected

The current status of the selected

function appears on the display.

The functions managed by the Menu

are:

use the

or buttons. The current

status of the selected function appears

on the display.

Once the Radio mode has been

activated, the display will show the

name (only RDS stations) and the

frequency of the selected radio station,

the frequency band selected (e.g.

FM1) and the preselect button number

(e.g. P1).

AF SWITCHING: automatic

activation/deactivation of the selection

of the station with the strongest signal

that transmits the same programme.

The functions managed by the Menu

are:

BASS: adjustment of bass tones;

TREBLE: adjustment of high tones;

TRAFFIC INFORMATION:

activation/deactivation of traffic

information (only on FM band).

BALANCE: right/left balance

adjustment;

Frequency band selection

REGIONAL MODE: activation/

deactivation of regional programmes.

FADER: front/back balance

adjustment;

With the Radio mode active, press the

FM, AS or AM button briefly and

repeatedly to select the desired

reception band.

MP3 DISPLAY: CD MP3 display

setting.

LOUDNESS: activation/deactivation

of the increase of bass and high tones;

SPEED VOLUME: speed-dependent

automatic volume control.

182

Each time the button is pressed, the

AM and FM bands are selected

cyclically:

Manual tuning

Press the (EJECT) button with the

radio on to activate the motorised

ejection of the CD. After ejection, the

last audio source listened to before

playing the CD will be heard.

Select the desired frequency band and

then press the or button briefly

and repeatedly to start to the search in

the desired direction. If the or

button is pressed longer, the fast

search will start and then stop when the

button is released.

Preset buttons

The buttons numbered from 1 to 6 are

used to set the following preset

stations:

72)

Indications on the display

When the CD player is in operation,

information appears on the display with

the following meanings:

18 in the FM band (6 in FM1, 6 in

FM2, 6 in FMT or "FMA" (on some

versions);

CD PLAYER

To activate the CD player built-into the

equipment, proceed as follows:

"CD Track 5": indicates the number

of the CD track;

12 in the MW band (6 in MW1, 6 in

MW2).

insert a CD with the equipment

switched on: the first track will start to

To listen to a preset station, select the

desired frequency band and then press

the corresponding preset button briefly

(from 1 to 6).

"03:42": indicates the time elapsed

since the start of the track (if the

respective Menu function is activated).

play;

or

if a CD has already been loaded,

switch on the radio and then briefly

press the CD button to select the “CD”

operating mode: the last track listened

to will start to play.

Track selection (forward/back)

By pressing the preset button for more

than 2 seconds, the tuned station will

be stored. The storing phase is

confirmed by an acoustic signal.

Briefly press the button to play the

previous CD track and the

play the next track.

button to

It is advisable to use original CDs to

ensure optimal playback. If CD-R/RW

are used, we recommend using good

quality media that are burned at the

slowest speed possible.

Fast forward/rewind through tracks

Hold down the button to fast

Automatic tuning

Briefly press the or button to start

the automatic tuning search for the

next station that can be received in the

selected direction.

forward the selected track or hold

down the button to fast rewind the

track.

CD loading/ejection

The fast forward/rewind will stop once

the button is released.

To load the CD, insert it gently into the

slot to activate the motorised loading

system, which will position it correctly.

183

182) Looking at the display for a long time:

while driving, do not use any function

that requires looking at the display for a

long time. Pull over in a safe and legal

manner before attempting to access a

function of the system that requires

prolonged attention. Even occasional short

glances at the display may be hazardous

if your attention is diverted from driving at a

critical moment.

"Pause" function

WARNING

To pause the CD player, press the

button. The words "CD Pause" will

appear on the display.

178) If the volume is too loud this could be

dangerous for the driver and for

passengers when driving in traffic. Always

adjust the volume so that you can still

hear background noises.

To resume listening to the track, press

the button again. If another audio

source is selected, the pause function

is deactivated.

179) Multimedia CDs include data tracks in

addition to the audio tracks. Playing this

type of CD can cause hissing at a volume

that may jeopardise road safety as well

as cause damage to the final stages and

the speakers.

183) Setting the volume: do not turn the

volume up too high. Keep the volume at a

level where you can still hear outside traffic

and emergency signals while driving.

Driving while unable to hear these sounds

may cause an accident.

CD MP3 PLAYER

In addition to playing normal audio

CDs, the car radio can also play

CD-ROMs on which MP3 format

compressed audio files are recorded.

The radio operates as described in the

"CD Player" chapter when an ordinary

audio CD is inserted.

180) Using some of the system functions

whilst driving can distract attention away

from the road, risking an accident or other

serious consequences; they should

therefore be used only when driving

conditions allow it and, if necessary, only

with the vehicle stationary.

WARNING

72) Do not press the eject button

accidentally when inserting a CD.

Selecting next/previous folder

Press the button to select one of the

next folders or press the button to

select a previous folder.

181) WARNING: Looking at the system

when driving can divert attention from the

road, with the risk of accidents or other

serious consequences. Do not change the

system settings or load data while driving.

Stop the vehicle in a safe and legal manner

before carrying out these operations.

Adopting these precautions is important

since setting or changing some functions

may require the driver to be distracted from

the road and remove their hands from the

steering wheel.

The display will show the number and

the name of the folder (e.g. “DIR 2

XXXXXX”).

If no other folder/track is selected

during the next 2 seconds, the first

track contained in the new folder will be

played.

If the last track in the folder at that

moment selected is played, the next

folder will be played.

184

ANTITHEFT PROTECTION

To enter the first digit of the code, press

the button corresponding to the

pre-selected stations (from 1 to 6).

Enter the other code digits in the same

way.

Uconnect RADIO

The Uconnect Radio is equipped with

an anti-theft protection system based

on the exchange of information

between the Uconnect Radio and the

electronic control unit (Body Computer)

present on the vehicle.

184) 185) 186) 187) 188) 189) 190) 191) 192) 193)

The Uconnect Radio was designed

according to the specific characteristics

of the passenger compartment, with a

customised design that perfectly

matches matching the style of the

dashboard.

If the four digits are not entered within

20 seconds, the display shows the text

"Enter code - - - -". If this occurs, it is

not considered an incorrect code entry.

After entering the fourth digit (within

20 seconds), the Uconnect Radio will

start to operate.

This system guarantees maximum

safety and prevents the secret code

from being entered each time the

Uconnect Radio power supply is

disconnected.

The instructions for use are given below

and we recommend you to read them

carefully.

If an incorrect code is entered, the

Uconnect Radio will emit a sound and

the display shows the text "Radio

blocked/wait" to notify the user of the

need to enter the correct code.

Each time the user enters an incorrect

code, the waiting time will gradually

increase (1 min, 2 min, 4 min, 8 min, 16

min, 30 min,1h, 2h, 4h, 8h, 16h, 24h)

up to a maximum of 24 hours.

TIPS

If the check has a positive outcome, the

Uconnect Radio will start to operate,

whereas if the comparison codes

are not the same or if the electronic

control unit (Body Computer) is

replaced, the device will ask the user to

enter the secret code according to

the procedure described in the

paragraph below.

Familiarise yourself with the various

functions of the Uconnect Radio (for

example, storing the stations) before

starting to drive.

Reception conditions

Reception conditions change

constantly while driving. Reception may

be interfered with by the presence of

mountains, buildings or bridges,

especially when you are far away from

the broadcaster.

Entering the secret code

The waiting time will be shown on the

display with the text "Radio blocked/

wait". After the text has disappeared it

is possible to start the code entering

procedure again.

When the Uconnect Radio is switched

on, if the password is requested, the

display will show "Radio code" for

about 2 seconds, followed by

four dashes "- - - -".

IMPORTANT The volume may be

increased when receiving traffic

bulletins.

The secret code is made up of four

digits from 1 to 6, each corresponding

to one of the dashes.

Vehicle radio passport

This document certifies ownership of

the Uconnect Radio. The radio

passport shows the Uconnect Radio

model, serial number and secret code.

Care and maintenance

Only clean the cover with a soft,

anti-static cloth. Cleaning and polishing

products may damage the surface.

185

IMPORTANT Keep the radio passport in

a safe place so that you can give the

information to the relevant authorities if

the Uconnect Radio is stolen.

In the case of loss of the vehicle radio

passport, contact the Fiat Dealership,

taking an ID document and the vehicle

ownership documents.

186

QUICK GUIDE

F1D0696

135

187

General functions

Button

Functions

Mode

Ignition

short button press

long button press

turn knob

Switching off

Volume adjustment

RADIO

ABC – 1 2 3 4 5 6

MEDIA

Select the radio source FM, AM, DAB (where present)

Select preset ranges

short cyclical button press

Select Audio Bluetooth®, USB/iPod, AUX

Volume activation/deactivation (Mute/Pause)

Short button press

Menu activation: short button press

Adjustment type selection: press

Audio adjustments: low tones (BASS), high tones

(TREBLE), RH/LH balance (BALANCE), front/rear

balance (FADER)

or

buttons.

Value adjustment: press

or

Menu activation: short button press

Adjustment type selection: press

MENU

Advanced functions adjustment

or

buttons.

Value adjustment: press

or

188

Radio functions

Button

Functions

Mode

Automatic search: press

down for fast forward)

Manual search: press

down for fast forward)

or

buttons (hold the button

Radio station search:

Automatic search

or

Manual search

Store current radio station

Long button press for memory preset from 1 to 6

1 2 3 4 5 6

Stored station recall

Brief button press for memory preset from 1 to 6

189

STEERING WHEEL CONTROLS

F1D0106

136

190

Button

Functions

Mode

Switch AudioMute on/off (Radio mode)

Pause function (MP3 mode)

/

Short button press

Return to the previous menu mode function

+

–

Increasing volume

Decreasing volume

Button press

Select sources FM, AM, DAB (where present), Bluetooth®

Audio, USB and AUX

SRC

Button press

Radio: automatic search for the next tunable broadcaster -

USB/iPod source: selecting the next track

Button press

Radio: automatic search for the previous tunable

broadcaster - USB/iPod source: selecting the previous track

.

Multimedia support function

Button

Functions

Accept an incoming phone call

End the phone call in progress

Reject an incoming phone call

Deactivate a voice recognition

Interrupt a voice message

Interrupt the reading of an SMS message

Exit from the Main Menu of Bluetooth®

/

Exit from a submenu and return to previous menu option

Exit from the current menu option without saving

Deactivate/reactivate the microphone during a phone conversation

Mute the volume of the call tone for incoming phone calls

Multimedia support Pause on/off

191

Button

Functions

Activation of voice recognition

Interruption of the voice message in order to give a new voice command

Adjust the audio volume of all functions: hands-free, text message reader, multimedia supports, voice

messages, Radio, USB, depending on the active source.

+/-

Scroll through Menu items on the panel

Select multimedia support tracks

Scroll through SMS messages in the list

Access to the radio menu displayed on the instrument panel

Confirm manually selected menu option

SRC/OK

Select sources: FM, AM, DAB (where present), Bluetooth® AUDIO, USB and AUX

Select the SMS message on the instrument panel

The functions of the steering wheel controls are activated when the button is released.

192

GENERAL INFORMATION

Bluetooth®

Switching off

The Uconnect Radio is equipped with

the following functions:

Radio section

Long press on button

(ON/OFF).

For the Bluetooth® function, see the

description in the dedicated paragraph.

Volume adjustment

USB/iPod section

To adjust the volume, turn the twist

control

PLL tuning with FM/AM/MW

frequency bands (where present);

For the USB/iPod function, see the

description in the dedicated paragraph.

.

If the volume level is changed during

the transmission of traffic news, the

new setting will only be maintained until

the news is finished.

RDS (Radio Data System) with TA

(traffic alerts) function - TP (traffic

AUX section

AUX source selection;

programmes) - EON (Enhanced Other

Network) - REG (regional programmes);

AUX Offset function: alignment of

the portable device volume with that of

the other sources;

MUTE/Pause function

AF: search selection for alternative

frequencies in RDS mode;

(setting volume to zero)

Portable player playback.

automatic/manual tuning into

stations;

Press the MUTE button briefly to

activate the Mute function. The volume

will gradually decrease and the words

"RADIO Mute" will be displayed (in radio

mode).

Note It is not possible to view the AUX

source info on the radio display

FM Multipath detector;

manual storing of 36 or 54 stations:

18 in the FM band (6 in FM-A, 6 in

FM-B and 6 in FM-C) and 18 in AM (6

in AM-A, 6 in AM-B and 6 in AM-C) and

18 in DAB (where present);

FUNCTIONS AND

ADJUSTMENTS

Press the Mute button again to

deactivate the MUTE function. The

volume will gradually increase until it

reaches the level set previously.

Ignition

The Uconnect Radio comes on when

SPEED VOLUME function:

automatic volume adjustment

according to the vehicle speed;

the (ON/OFF) button/knob is

pressed briefly.

Audio settings

If the Uconnect Radio is switched on

when the key is removed from the

ignition, it will switch off automatically

after about 20 minutes (if this time

has been set). After the Uconnect

Radio has switched itself off

The functions that can be selected from

the audio menu change depending on

the context: AM/FM and DAB (where

present)/USB/iPod/Bluetooth®/AUX.

automatic Stereo/Mono selection.

Audio section

MUTE/Pause function;

Loudness function

7-band graphic equaliser;

Separate bass/treble adjustment

Right/left channel balance.

automatically it can be turned on for a

further 20 minutes by pressing the

(ON/OFF) button.

193

Press the AUDIO button briefly to

change the Audio functions. After the

AUDIO button is first pressed, the

display will show the bass level value

for the source activated at that time

(e.g. in FM mode the display will show

the wording "FM Bass +2").

MENU

REGIONAL MODE: activation/

deactivation of regional programmes.

MENU button functions

MP3 DISPLAY: MP3 display setting.

Press the button MENU briefly to

activate the Menu function.

Use the or buttons to scroll

through the menu functions. To change

the setting of the function selected

use the or buttons.

SPEED VOLUME: speed-dependent

automatic volume control.

RADIO ON VOLUME: maximum

radio volume limit activation/

deactivation.

Use the

or buttons to scroll

through the menu functions. To change

the setting of the function selected

The functions managed by the Menu

are:

RADIO OFF: off mode selection.

SYSTEM RESET: reset of factory

settings.

use the

or buttons.

AF SWITCHING: automatic

The current status of the selected

function appears on the display.

The functions managed by the Menu

are:

activation/deactivation of the selection

of the station with the strongest signal

that transmits the same programme.

Press the button MENU again to exit

the Menu function.

Note The AF SWITCHING, TRAFFIC

INFORMATION and REGIONAL MODE

adjustments are only possible in FM

mode.

BASS: adjustment of bass tones;

TREBLE: adjustment of high tones;

Note FM following in DAB (where

provided; the radio switches

automatically to FM in case of low DAB

signal and back to DAB as soon as

the signal is available) is enabled by

enabling AF.

BALANCE: right/left balance

adjustment;

RADIO (Tuner)

FADER: front/back balance

adjustment;

To select the Radio function while

listening to another audio source, briefly

press the RADIO button several times

to select the desired band, FM AM

or DAB (where present).

LOUDNESS: activation/deactivation

of the increase of bass and high tones;

TRAFFIC INFORMATION: activation/

deactivation of traffic information.

EQUALISER: activation and

selection of factory-set equaliser levels;

Note Traffic information is enabled only

if tuned to the station broadcasting

the announcement.

Once the Radio mode has been

activated, the display will show the

name (only RDS stations) and the

frequency of the selected radio station,

the frequency band selected (e.g.

FMA) and the preselect button number

(e.g. P1).

MY EQ: customised equaliser

setting.

DAB INFO CATEGORIES (only

enabled for DAB sources): single

category enable/disable (Financial,

News flash, Program info, Spec event,

Sport report, Warning, Weather).

194

Each time the button is pressed, the

FM, AM and DAB bands (where

present) are selected cyclically.

Manual tuning

The hands-free function allows the

following operations to be performed:

Select the desired frequency band and

then press the or button briefly

and repeatedly to start to the search in

the desired direction. If the or

button is pressed longer, the fast

search will start and then stop when the

button is released.

Calling a telephone number by voice

command: you can dial a telephone

number by stating the numbers out

loud.

Preset buttons

The buttons numbered from 1 to 6 are

used to set the following preset

stations:

Calling someone in the phonebook

using voice commands: you can call

someone in your mobile phonebook

using your voice. You can also call

someone in your phonebook by

18 in the FM band (6 in FM-A, 6 in

FM-B and 6 in FM-C);

USB/iPod MODE

To activate USB/iPod mode, insert the

respective device (USB stick or other

device) in the USB port located in

the glove compartment.

18 in the AM band (6 in AM-A, 6 in

AM-B and 6 in AM-C).

selecting from the contacts that appear

on the display of the instrument panel.

(This function requires your phone

directory to have been copied onto the

vehicle hands-free system).

To listen to a preset station, select the

desired frequency band with the RADIO

button, briefly press ABC button to

select the preset band (A, B or C), and

then briefly press the corresponding

preset button (from 1 to 6).

If a USB/iPod device is inserted with

the system on, this starts playing the

tracks present on the device.

Accepting a call: you can accept an

button

AUX MODE

incoming call by pressing the

on the steering wheel.

By pressing the preset button for more

than 2 seconds, the tuned station will

be stored. The storing phase is

To activate the AUX source, press the

MEDIA button or the SRC control

on the steering wheel repeatedly until

the corresponding source is displayed.

Rejecting a call: you can reject a call

with a long press of the

the steering wheel.

button on

confirmed by an acoustic signal.

Automatic tuning

BLUETOOTH®

Text message reader

Briefly press the or button to start

the automatic tuning search for the

next station that can be received in the

selected direction.

Bluetooth® technology allows you to

use your mobile phone through the

car's hands-free system, without the

need for wires.

To use the hands-free function it is

necessary to have a mobile phone with

(available only with mobile phones that

support this function)

The SMS message reader makes it

possible to:

®

Bluetooth technology. To consult

the list of compatible phones, see the

site: www.mopar.eu/owner.

195

Be informed, by means of a

message on the instrument panel

display, of the reception a new SMS

message on your mobile phone with

Bluetooth® technology; the number/

name of the sender is displayed and

the system will also ask whether to read

the message to you.

MULTIMEDIA FUNCTIONS

Activate the Main Menu from the

steering wheel controls on the

instrument panel display, select the

BROWSE USB option and then press

SRC/OK.

The MEDIA menu allows you to view

and reproduce the tracks stored on

®

a USB/Bluetooth AUDIO or AUX

source (connected to the USB port).

It is recommended to load only

unprotected music files, with supported

extensions. If the USB device contains

other formats (e.g. .exe, .cab, .inf,

etc.), problems might arise during

playing of tracks.

Select one of the following items:

FOLDERS

ARTISTS

GENRES

ALBUMS

Manage the list of messages

received on your mobile phone only

during connection with the active

system.

PLAYLIST

and press SRC/OK.

To connect your UBS device to the

system, proceed as follows:

Quick guide to the SMS message

reader

select “PLAY ALL” and confirm with

Connect the device to the USB

socket in the glove compartment;

SRC/OK;

(only for mobile phones that support

this function)

select the item chosen and confirm

with SRC/OK;

Turn the ignition key to MAR. The

system will automatically start playing

your digital tracks, selecting them from

a library that is created the moment

the USB device is connected.

If your Bluetooth® phone supports

this function, when you receive a new

SMS message, the system alerts you

with an acoustic signal and asks you if

you want to read it.

It is also possible to access the same

functions with the voice commands:

press the button on the steering

wheel and say "BROWSE USB";

When the creation of the multimedia

library is over, it is possible to use

the system to display and select the

tracks present and to activate playing.

Say “Yes” or press the button or

SRC/OK. The system will read the

say one of the available options:

"FOLDERS", "ARTISTS", "GENRES",

"ALBUMS", "PLAYLIST";

last message received;

Say “NO” or press the

/

select “PLAY ALL” and confirm with

Managing the multimedia library

button. The system will store the

message which you can read later, as

long as the phone is connected to

the system.

SRC/OK;

With the MEDIA function you can select

the digital audio on your USB device,

using voice recognition or the steering

wheel controls.

select the item chosen and confirm

with SRC/OK.

To get to know all the functions and

ways of using the SMS message

reader, refer to the "SMS MESSAGE

READER FUNCTIONS" chapter.

Tracks may be selected by folder, artist,

musical genre, album and playlist.

196

Pause

Change audio source

Pairing a Bluetooth® device

To pause the track you are listening to:

press

To change the active audio source

(Radio, USB/iPod, Tuner, Bluetooth®

Audio) press the SRC/OK or MEDIA

button on the front panel of the Ucon-

nect Radio, or, with voice interaction:

say “Select source USB/iPod, Radio,

Bluetooth® Audio”.

Note This operation should be carried

out only with the vehicle stationary.

/

or the MUTE button

on the front panel of the Uconnect

Radio.

To resume listening to a track that you

To pair your mobile phone with the

system, proceed as follows.

Manual procedure:

have paused: press

MUTE button on the front panel of the

/

or the

Activate the Main Menu by pressing

the MENU button;

Uconnect Radio.

Note While playing Bluetooth® audio,

there could be some incorrect displays

related to the phone. This is not due to

the radio, but depends on the informa-

tion sent by the phone.

select the SETTINGS option, then

the "Pairing" option.

Voice procedure:

Stop

To stop playing a track: say "Stop”.

To resume, say “Play”.

Press and say “Settings”. Then,

at the end of the message, say

"Pairing".

BLUETOOTH® DEVICE

Note The “Play” command is only

available if playback has been stopped

using the “Stop” command.

IMPORTANT NOTES

Access to the phonebook copied

onto the system is possible only when

the mobile phone from which it has

been copied is connected.

The system will show a PIN number

on the display to be used for pairing.

Next track

Using the search function of the Blu-

etooth® devices of your phone, search

for the “Radio BT” device.

To skip to the next track, using manual

interaction: while listening to a digital

track, press (steering wheel controls)

or (Uconnect Radio controls) (where

present).

The names stored on the SIM card

or in your mobile phone memory can

be transferred to the system in different

ways, depending on the model of

mobile phone.

When prompted, enter the PIN code

displayed on the instrument panel

using your mobile phone keypad. If

pairing is successful, the system will

say "Connecting" and at the end the

display will show, as confirmation, the

ID of the paired mobile phone.

Previous track

Getting to know the voice

commands

To return to the previous track, using

manual interaction: while listening to a

digital track, press (steering wheel

controls) or (Uconnect Radio

controls) (where present).

When talking to the system, you can

always use the voice command "Help"

to obtain detailed instructions on the

voice commands available for each

interactive stage.

Once the device has been paired, if the

function is supported by the phone,

the system automatically asks to

download the phonebook onto the

Uconnect Radio.

197

Note After updating the phone

software, for proper operation, it is

recommended to remove the phone

from the list of devices linked to the

radio, delete the previous system

pairing also from the list of Bluetooth®

devices on the phone and make a new

pairing.

Answering a call:

CALL BACK;

READ LAST;

To answer the call, press

;

To end the call, press

than 1 second.

To reject a call: press

for more

Audio Bluetooth®/USB/iPod Com-

mands

.

PLAY;

To ignore a call and not hear the ring

tone, press

PAUSE;

STOP.

/

.

Putting a phone call on HOLD

Radio

SELECT BAND “FM” “AM” or

“DAB”.

Making a phone call

To place a call in progress on HOLD

and disable the microphone in order to

be able to speak without being heard

by the person you are talking to, press

Press the steering wheel control

and say “Call” and the name of the

contact in the phonebook.

Note It is advisable not to direct the

middle air vents towards the

If the name is recognised, the

system will display the information for

the contact on the display.

/

.

microphone (fig. 137) because the

noise generated by the air on the

microphone could cause worsen voice

control performance.

VOICE COMMANDS

The system will ask you to confirm

your request. To make the call, say

"Yes"; otherwise, say "No".

Global commands

SELECT MEDIA SOURCE;

SELECT RADIO SOURCE;

SELECT PHONE SOURCE;

CALL or DIAL;

READ MESSAGE;

SETTINGS;

Alternatively, it is possible to call a

number that is not in the phonebook by

saying the number one figure at a

time.

Managing an incoming call

HELP;

CANCEL;

When a call is received, the system will

display the caller's ID, where available.

The incoming call will be signalled by

your mobile phone's personalised

ringtones (the availability of this function

depends on the specific features of

your phone).

REPEAT.

Phone commands

DIAL;

F1D0999

137

CALL (followed by name);

CALL (followed by number);

198

188) Warning: looking at the system when

driving can divert attention from the road,

with the risk of accidents or other serious

consequences. Do not change system

settings or enter data non-verbally (using

the manual controls) while driving. Stop the

vehicle in a safe and legal manner before

carrying out these operations. Adopting

these precautions is important since setting

or changing some functions might require

the driver to be distracted away from

the road and remove his or her hands from

the steering wheel.

PANDA UCONNECT APP

To use the Panda Uconnect app you

must download it from the Apple App

Store or from Google Play and pair

the smartphone to the radio via Blu-

etooth®, as described in the "Blu-

etooth® Device” chapter. For the list of

compatible phones, see Fiat elum site.

WARNING

184) If the volume is too loud this could be

dangerous for the driver and for

passengers when driving in traffic. Always

adjust the volume so that you can still

hear background noises.

185) The use of some of the system's

features whilst driving can divert attention

away from the road, with the risk of

causing accidents or other serious

consequences; therefore they must only be

used when the driving conditions allow

and, where necessary, only when the

vehicle is stationary.

The app interface may change

depending on how it is used:

connected or not connected to the car

radio.

189) Voice commands: the system

functions can be carried out using only

voice commands. The use of voice

commands when driving allows you to

manage the system without taking your

hands off the steering wheel.

When it is connected via Blu-

etooth®, you can interact with the

radio through the screen of your smart-

phone. You can listen to you favourite

music by selecting the source, the track

or the radio station desired. You can

also view the phonebook, your car

handbook and, if necessary, call for

assistance.

When it is not connected, you can

have all the information about the state

of your car with my:Car and indications

about your driving style with eco:Drive.

You can also find your car easily if

you do not remember where you

parked it.

186) Read and follow these instructions:

before using your system, read and follow

all the safety information and instructions in

this manual. Failure to observe the

precautions found in this manual may lead

to an accident or other serious

190) Looking at the display for a long time:

while driving, do not use any function

that requires looking at the display for a

long time. Pull over in a safe and legal

manner before attempting to access a

function of the system that requires

prolonged attention. Even occasional quick

glances at the display can be dangerous

if the driver's attention is diverted at a

critical moment.

consequences.

187) Keep the manual in the car: if it is kept

in the car, the manual will become

something quick and easy to consult for

those not familiar with the system. Ensure

that everyone has access to the manual

and reads the instructions and the safety

information carefully before using the

system for the first time.

191) Setting the volume: do not turn the

volume up too high. When driving, keep the

volume at a level that allows you to hear

the traffic outside and emergency sirens.

Driving while unable to hear these sounds

may cause an accident.

199

192) Using the voice recognition: the voice

recognition software is based on a

statistical process that is subject to error. It

is your responsibility to monitor voice

recognition functions included in the

system and address any errors.

193) Danger of distraction: the functions

may require manual settings (not using

voice commands). Attempting to perform

such setup or insert data while driving

can seriously distract your attention and

could cause an accident or other serious

consequences. Stop the vehicle in a safe

and legal manner before carrying out these

operations.

200

MULTIMEDIA for Your Fiat Panda SUV Second Generation (2003-2012)

Related Topics

Popular Owner Manuals

Latest Owner Manuals