2003-2012 Fiat Panda SUV STARTING AND DRIVING -> STARTING THE ENGINE User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

STARTING AND DRIVING -> STARTING THE ENGINE for Your Fiat Panda SUV Second Generation (2003-2012)

Diesel versions  
VERSIONS WITH  
DUALOGIC GEARBOX  
STARTING THE  
ENGINE  
Proceed as follows:  
118)  
engage the handbrake, put the gear  
lever into neutral and turn the ignition  
Engine starting is allowed both with a  
gear engaged and with the gearbox  
in neutral (N).  
116) 117)  
key to MAR: the warning lights  
on the instrument panel will turn  
and  
38) 39) 40) 41)  
However, the brake pedal must always  
be pressed first if neutral is not  
engaged. It is therefore advisable to  
place the gear lever in neutral (N) before  
starting the engine.  
Before starting the engine, adjust the  
seat, the interior rear view mirrors,  
the door mirrors and fasten the seat  
belt correctly.  
on;  
wait for the warning lights  
to turn off and then fully depress  
and  
the clutch pedal without pressing the  
accelerator;  
Never press the accelerator pedal for  
starting the engine.  
LPG AND NATURAL  
POWER VERSIONS  
turn the ignition key to AVV as soon  
switches off.  
as warning light  
Release the ignition key as soon as the  
engine starts.  
The engine always starts up on petrol  
independently of the mode previously  
selected.  
VERSIONS WITH MANUAL  
GEARBOX  
Petrol versions  
42)  
IMPORTANT If the engine does not  
start at the first attempt, return the  
ignition key to STOP before repeating  
the procedure. If, with the ignition  
Proceed as follows:  
STOPPING THE ENGINE  
engage the handbrake and place  
the gear lever in neutral. For 0.9  
TwinAir and 0.9 TwinAir Turbo  
versions engage the handbrake and  
place the gear lever in neutral or fully  
press the clutch pedal if a gear other  
than neutral is engaged;  
43)  
Turn the ignition key to STOP while the  
engine is idling.  
key at MAR, the warning lights  
and  
(only for petrol versions) stay on  
in the instrument panel, the ignition key  
must be brought back to STOP and  
IMPORTANT After a demanding drive,  
before turning the engine off you should  
allow it to idle to allow the temperature  
in the engine compartment to  
decrease.  
then to MAR again. If the  
warning  
for all versions (except 0.9  
TwinAir Turbo) fully depress the clutch  
pedal, without pressing the accelerator;  
light stays on, retry with the other  
keys provided. Contact a Fiat  
Dealership if you still cannot start the  
engine.  
turn the ignition key to AVV and  
release it as soon as the engine starts.  
92  

Related Topics

Popular Owner Manuals