Previous track
Getting to know the voice
commands
When prompted, enter the PIN code
displayed on the instrument panel
using your mobile phone keypad. If
pairing is successful, the system will
say "Connecting" and at the end the
display will show, as confirmation, the
ID of the paired mobile phone.
To return to the previous track, using
manual interaction: while listening to a
digital track, press (steering wheel
controls) or (Uconnect Radio
controls) (where present).
When talking to the system, you can
always use the voice command "Help"
to obtain detailed instructions on the
voice commands available for each
interactive stage.
Change audio source
Once the device has been paired, if the
function is supported by the phone,
the system automatically asks to
download the phonebook onto the
Uconnect Radio.
Pairing a Bluetooth® device
To change the active audio source
(Radio, USB/iPod, Tuner, Bluetooth®
Audio) press the SRC/OK or MEDIA
button on the front panel of the Ucon-
nect Radio, or, with voice interaction:
say “Select source USB/iPod, Radio,
Bluetooth® Audio”.
NOTE This operation should be carried
out only with the car stationary.
To pair your mobile phone with the
system, proceed as follows.
Manual procedure:
NOTE After updating the phone
software, for proper operation, it is
recommended to remove the phone
from the list of devices linked to the
radio, delete the previous system
pairing also from the list of Bluetooth®
devices on the phone and make a new
pairing.
Activate the Main Menu by pressing
the MENU button;
NOTE While playing Bluetooth® audio,
there could be some incorrect displays
related to the phone. This is not due to
the radio, but depends on the informa-
tion sent by the phone.
select the SETTINGS option, then
the "Pairing" option.
Voice procedure:
BLUETOOTH® DEVICE
Press and say “Settings”. Then,
at the end of the message, say
"Pairing".
Making a phone call
IMPORTANT NOTES
Press the steering wheel control
and say “Call” and the name of the
contact in the phonebook.
Access to the phonebook copied
onto the system is possible only when
the mobile phone from which it has
been copied is connected.
The system will show a PIN number
on the display to be used for pairing.
If the name is recognised, the
system will display the information for
the contact on the display.
Using the search function of the Blu-
etooth® devices of your phone, search
for the “Radio BT” device.
The names stored on the SIM card
or in your mobile phone memory can
be transferred to the system in different
ways, depending on the model of
mobile phone.
The system will ask you to confirm
your request. To make the call, say
"Yes"; otherwise, say "No".
205
English 
