Get MULTIMEDIA Guide for Fiat Punto SUV 2011-2018

MULTIMEDIA

RADIO.............................................156

BLUE&ME ......................................161

This chapter describes the main

functions of the radio and Blue&Me™

that can be fitted on the vehicle.

155

If the check has a positive outcome, the

radio will start to function, whereas if

the comparison codes are not the

same or if the electronic control unit

(Body Computer) is replaced, the

device will ask the user to enter the

secret code according to the procedure

described in the paragraph below.

Entering the secret code

Each time the user enters an incorrect

code, the waiting time will gradually

increase (1 min, 2 min, 4 min, 8 min, 16

min, 30 min,1h, 2h, 4h, 8h, 16h, 24h)

up to a maximum of 24 hours. The

waiting time will be shown on the

display with the text "Radio blocked/

wait". Once the text has disappeared

you can start the code entering

procedure again.

RADIO

173) 174)

The radio has been designed according

to the specifications of the passenger

compartment, with a personalised

design matching the style of the

dashboard perfectly.

TIPS

When the radio is switched on, if the

password is requested, the display will

show "Radio code" for about 2

seconds followed by four dashes "- - -

-".

Road safety

Vehicle radio passport

Please, learn how to use all different

radio functions (e.g. save stations)

before beginning to drive.

This document certifies the ownership

of the vehicle radio. The radio passport

shows the radio model, serial number

and secret code.

Care and maintenance

The secret code is made up of four

digits from 1 to 6, each corresponding

to one of the dashes.

Clean the cover with a soft anti-static

cloth only. Cleaning and polishing

products may damage the surface.

IMPORTANT Keep the radio passport in

a safe place so that you can give the

information to the relevant authorities if

the radio is stolen.

To enter the first digit of the code, press

the button corresponding to the

pre-selected stations (from 1 to 6).

Enter the other code digits in the same

way. If the four digits are not entered

within 20 seconds, the display shows

the text "Enter code - - - -". If this

occurs, it is not considered an incorrect

code entry.

ANTI-THEFT

PROTECTION

In the case of loss of the vehicle radio

passport, contact the Fiat Dealership,

taking an ID document and the vehicle

ownership documents.

The radio is equipped with an anti-theft

protection system based on the

exchange of information between the

radio and the electronic control unit

(Body Computer) present on the

vehicle. This system guarantees

maximum safety and prevents the

secret code from being entered each

time the radio power supply is

disconnected.

After entering the fourth digit (within 20

seconds), the radio will work.

If an incorrect code is entered, the radio

will emit a sound and the display

shows the text "Radio blocked/wait" to

notify the user of the need to enter

the correct code.

156

QUICK GUIDE

Controls on front panel

F1E0818

117

A - Speech Volume version;

B - Bluetooth Delphi version;

157

General functions

Button

Functions

Mode

Switching on/off

Brief button press

ON/OFF

FM1, FM2, FM Autostore radio source selection

MW1, MW2 radio source selection

Brief cyclical button press

FM

AM

CD/Media Player (only with Blue&Me™)/AUX (only with

Blue&Me™, for versions/markets, where provided),

USB/iPod and Bluetooth® (for versions/markets, where

MEDIA

Brief cyclical button press

Brief button press

provided) source selection

MUTE

Volume activation/deactivation (Mute/Pause)

Audio adjustment: low tones (BASS), high tones

(TREBLE), RH/LH balance (BALANCE), front/rear balance

(FADER)

Menu activation: short button press

Selection of adjustment type: pressing the

Value adjustment: pressing the buttons.

AUDIO

/

buttons

/

Menu activation: short button press. Selection of

adjustment type: pressing the buttons. Value

buttons.

MENU

Advanced functions adjustment

/

adjustment: pressing the

/

Volume adjustment

Ring nut rotation

.

Radio functions

Button

Functions

Mode

Automatic search: pressing the

button down for fast forward)

/

buttons (hold the

Radio station search: automatic/manual search

Manual search: pressing the

button down for fast forward)

or

158

Button

Functions

Mode

Storing of the current radio station and stored station

recall

Long button press for memory preset from 1 to 6

Brief button press for memory preset from 1 to 6

1 2 3 4 5 6

Stored station recall

.

Multimedia functions (for versions/markets, where provided)

Button Multimedia functions (CD/USB/iPod)

CD ejection

Mode

Brief button press

EJECT

Play previous/next track

Brief

button press

/

CD track fast forward/rewind

Long

/

Play previous/next folder (CD MP3)

Brief

/

button press

.

Media Player functions (only with Blue&Me™)

Button

Functions

Mode

Select previous/next folder/artist/genre/album depending

on the active selection mode

Brief button press

Play previous/next track

.

AUX functions (for versions/markets, where provided)

Button Functions

Mode

Volume adjustment

Left/right rotation of volume knob

159

GENERAL INFORMATION

CD Display function: display of disc

name and time elapsed since the

start of the track;

USB/iPod functions

(for versions/markets, where provided)

The radio offers the following functions:

Radio section

Note If a USB/iPod device is inserted

with the system on, this starts playing

the tracks present on the device.

Audio CD, CD-R and CD-RW

playing.

MP3 CD section

PLL tuning with FM/AM/MW

frequency bands;

RDS (Radio Data System) with TA

(traffic alerts) function / TP (traffic

AUX section (only with Blue&Me™)

(for versions/markets, where provided)

AUX source selection;

MP3-Info function (ID3-TAG);

Folder selection (previous/next);

programmes) / EON (Enhanced Other

Network) / REG (regional programmes);

Track selection (forward/rewind) and

fast forward (forward/rewind) of the

tracks;

AUX Offset function: alignment of

the portable device volume with that of

the other sources;

AF: search selection for alternative

frequencies in RDS mode;

MP3 Display function: display of

name of folder, ID3-TAG information,

time elapsed since the start of the

track, name of the file);

provision for emergency alarm;

Portable player playback.

automatic/manual tuning into

stations;

WARNING

FM Multipath detector;

Reading of audio or data CD, CD-R

and CD-RW.

Audio section

manual storing of 30 stations: 18 on

FM band (6 on FM1, 6 on FM2, 6 on

FMT), 12 on MW band (6 on MW1,

6 on MW2);

173) High volume can be a risk for the

driver and for other road users. Always

adjust the volume so that you can still hear

background noises.

Mute/Pause function;

Soft Mute function and Loudness

function;

automatic storing (AutoSTore

function) of 6 stations in the dedicated

FM band;

174) Multimedia CDs include data tracks in

addition to the audio tracks. Playing this

type of CD can cause hissing at a volume

that may jeopardise road safety as well

as cause damage to the final stages and

the speakers.

7-band graphic equaliser;

Separate adjustment of the

bass/treble and right/left channel

balance.

SPEED VOLUME function:

automatic volume adjustment

according to the vehicle speed;

Media Player section (only with

Blue&Me™ and Bluetooth®)

(for versions/markets, where provided)

automatic Stereo/Mono selection.

CD section

Direct selection of the disc;

For the Media Player and Bluetooth®

functions see the "Blue&me" para-

graph.

Track selection (forward/rewind) and

fast forward (forward/rewind) of the

tracks;

160

BLUE&ME™

175) 176) 177) 178) 179) 180) 181)

.

DISPLAY AND STEERING WHEEL CONTROLS

.

F1E0817

118

161

Button

Brief press (less than 1 second)

Long press (more than 1 second)

Activation of Blue&Me™ Main Menu

Selected menu option confirmation

Acceptance of incoming call

Rejection of incoming call

Ending of call in progress

/MENU

Passing from one telephone conversation to

another in second call mode (call notification)

Selection of message displayed

Activation of voice recognition

Repetition of the last voice message given by

Interruption of the voice message in order to

give a new voice command

the system

Deactivation of voice recognition

Interruption of voice message and Interruption of

SMS message reading

Exit from the Blue&Me™ Main Menu, exit from

a submenu and return to the previous menu option

Exit from the current selection without saving

/

–

Deactivation/reactivation of the microphone

during a phone conversation

Muting the volume of the call tone for incoming

phone calls

Media Player Pause activation/deactivation

Adjustment of the audio volume of the

Blue&Me™ and Bluetooth® functions (for

+/–

–

versions/markets, where provided): hands-free,

SMS message reader, Media Player, voice

announcements

Scrolling the items in the Blue&Me ™ menu

and scrolling the SMS messages in the list

Media Player track selection

162

Button

Brief press (less than 1 second)

Long press (more than 1 second)

Selected menu option confirmation during

manual interaction

Transfer of phone conversation in progress from

hands-free system to mobile phone and vice versa

SRC/OK

–

Select audio sources (Radio, CD, CD Charger,

Media Player, AUX for versions/markets, where

provided)

Selection of SMS message displayed

Radio buttons

Selection of previous/next folder/artist/genre/

album depending on the mode selected

–

Play previous/next track (Media Player mode)

For many functions, the steering wheel controls SRC/OK and

/MENU are interchangeable and you can choose whichever

button you prefer. For both operating modes for the controls on the steering wheel (short/long press), the function is activated

when the button is released.

163

INTRODUCTION

IMPORTANT

You can now give one of the

available commands and proceed with

the dialogue as you wish. If you need

further help press and say "Help".

Pairing your mobile phone

Access to the phonebook copied to

Blue&Me™ is possible only when

the mobile phone from which it was

copied is connected.

Fiat Blue&Me™, based on Microsoft

Auto™, features hands-free, SMS

message reader and Media Player

functions. The Blue&Me™ system is

completely integrated with voice

commands, buttons on the steering

wheel and display to facilitate operation

without distracting the driver from the

road or requiring them to take their

hands off the steering wheel.

Entries stored in the SIM card or

mobile phone memory can be

transferred to Blue&Me™ with different

procedures, depending on your mobile

phone model.

IMPORTANT This operation should be

carried out only with the vehicle

stationary.

To pair your mobile phone, proceed as

follows:

Getting to know the voice

commands

Press and say "Settings" and

then, at the end of the message from

Blue&Me™, say "User pairing".

The system will show a code number

(PIN) on the instrument panel display,

which is used for the pairing procedure.

For the two subsequent stages,

HANDS-FREE FUNCTION

QUICK GUIDE

When talking to the system, you can

always use the voice command "Help",

to obtain detailed instructions on the

voice commands available for each

stage of interaction.

To start using the hands-free function

with voice recognition and Bluetooth®

technology provided by Blue&Me™:

make sure that the ignition key is at

MAR, practise the voice commands,

pair your mobile phone and make a

call.

To practise the "Help" command

proceed as follows:

consult your mobile phone manual.

Look for devices with Bluetooth®

technology on your mobile phone (the

setting on your mobile phone could be

called "Search" or "New Device").

Find “Blue&Me” in this list (the name

that identifies the Blue&Me ™ system

in your vehicle) and select it.

Press the steering wheel control

and after Blue&Me™ has emitted

an acoustic signal to indicate that voice

recognition is active, say "Help".

Blue&Me™ will give the list of voice

commands available.

Preparing your mobile phone

phonebook

Before pairing your mobile phone with

Blue&Me™, you must make sure

you have stored the names you want to

contact in the phonebook on your

mobile phone so that you can call them

using the vehicle's hands-free system.

If your phonebook does not contain any

names, enter new names for the most

frequently used numbers. For further

details, consult your mobile phone

manual.

When prompted, enter the PIN code

displayed using your mobile phone

keypad. If pairing is successful, the

system will say "Connecting" and at

the end the display will show, as

confirmation, the ID of the paired

mobile phone.

At the end of the help message, say

"Settings" and, at the end of the

message, "Help". Blue&Me™ will give

the list of voice commands available

for the Settings menu.

164

It is important to wait for this

confirmation message; if you press

To call "John", press the steering

wheel control and say "Call John": if

the system recognises the name

"John", it will display the information

regarding it.

To call the number displayed, say

"Call". You can also navigate through

/MENU or

/

before it

this list manually by pressing the

/

appears, you risk cancelling the pairing

process. If the pairing process fails,

an error message will be displayed and

the pairing procedure will have to be

repeated.

controls on the steering wheel until

you find the desired number. At this

If there is just one phone number for

John in your phonebook, the system

will ask if you would like to call John. To

make the call, say "Yes"; otherwise,

say "No".

point, press

make the call.

/MENU or SRC/OK to

Ending a phone call: press

/MENU.

After pairing your mobile phone, the

first time you connect, Blue&Me™

will say "Welcome". This message will

no longer be heard at subsequent

pairing or connecting procedures.

SMS MESSAGE READER

QUICK GUIDE

(only for mobile phones which support

this function)

If, on the other hand, there are several

phone numbers for John, the system

will ask which one you wish to call (e.g.

"Call John work or home?").

If your Bluetooth® phone supports

this function, when you receive a new

SMS message, Blue&Me™ alerts you

with an acoustic signal and asks you

whether you want to read it.

Blue&Me™ asks you if you want to

copy the phonebook of the mobile

phone just paired onto the Blue&Me™

system. You are advised to copy it. To

proceed with copying, say "Yes"; if you

do not want to copy the phonebook,

say "No". On some mobile phones, the

names in the phonebook are not

Respond by indicating which number

you want to call (e.g. "Home").

If John has several phone numbers but

the type of phone number is missing,

the system will display the selected

contact and a list of related phone

numbers. The hands-free system will

ask if you would like to call the phone

number displayed. If the number

displayed is the one you wish to call,

say "Yes"; otherwise, say “No". If

the person to contact is the correct

one, but the number is wrong, say

"Forward" or "Back" to see the other

phone numbers for this person.

Say "Yes" or press the

or SRC/OK button: the system will

/MENU

read the last message received.

Say "No" or press the

/

copied automatically, but have to be

transferred by using the mobile phone

keypad. If Blue&Me™ asks you, carry

out this procedure by following the

specific instructions on your mobile

button: the system will store the

message so you can read it another

time.

MEDIA PLAYER QUICK

GUIDE

phone and press

have finished.

/MENU when you

Proceed as follows to start playing the

digital audio stored on your USB

device:

Making a phone call

Imagine that "John" is one of the

names saved in your phonebook.

Copy the tracks onto your USB

device.

165

For USB devices without a USB

cable, simply connect the device to the

USB port in the vehicle (directly or

with the help of an extension).

LIST OF AVAILABLE

VOICE COMMANDS

Loop off

Automatic play on

Automatic play off

Now playing (track data)

The main Blue&Me™ available voice

commands are listed below.

For USB devices with a cable,

connect one end to your USB device

and the other to the USB port in the

vehicle.

Voice commands always available

Help

Voice commands for the settings

functions

Settings

Cancel

Repeat

Multimedia file settings

Exit

Turn the vehicle's ignition key to

MAR. Blue&Me™ will automatically

start to play your digital tracks,

selecting them from a library that is

created when you connect the USB

device. The time required by

Hands free voice commands

Call number

Call name

WARNING

Phone

Last call received

Last call made

Last call

Blue&Me™ to recognise your USB

device and start playback may depend

on the type of device, its capacity

and its contents.

175) Using some of the system functions

whilst driving can distract attention away

from the road, risking an accident or other

serious consequences; they should

therefore be used only when driving

conditions allow and, if necessary, only

with the vehicle stationary.

SMS reader voice commands

Read

After Blue&Me™ has created a

library of your digital audio files, you can

select and listen to tracks, albums,

artists and playlists, using manual or

vocal interaction with Blue&Me™.

Creating the library may require a few

minutes if your USB device contains

many files. You can also decide

whether to play audio files automatically

when the USB/iPod device is

Read last

176) IMPORTANT Looking at the system

when driving can divert attention from

the road, with the risk of accidents or other

serious consequences. Do not change

system settings or enter data non-verbally

(using the manual controls) while driving.

Stop the vehicle in a safe and legal manner

before carrying out these operations. This

is important since while setting up or

changing some functions your attention

may be distracted from the road and you

may have to remove your hands from

the wheel.

Message reader

Media player voice commands

Media player

Play

Brake lights

command.

part no.

Shuffle on

Shuffle off

Loop on

166

177) Voice commands: the system

functions can be carried out using only

voice commands. The use of voice control

commands when driving allows the system

to be managed without taking your hands

off the steering wheel.

178) Looking at the display for a long time:

while driving, do not use any function

that requires looking at the display for a

long time. Pull over in a safe and legal

manner before attempting to access a

function of the system that requires

prolonged attention. Even occasional short

glances at the display may be hazardous

if your attention is diverted from driving at a

critical moment.

179) Setting the volume: do not turn the

volume up too high. Keep the volume at a

level where you can still hear outside traffic

and emergency signals while driving.

Driving without being able to hear these

sounds can cause accidents.

180) Using the voice recognition: the voice

recognition software is based on a

statistical process that is subject to error. It

is your responsibility to monitor the

system's voice recognition functions and to

correct any errors.

181) Danger of distraction: the functions

may require manual settings (not using

voice commands). Performing these

settings or entering data when driving can

distract you significantly, causing accidents

or having other serious consequences.

Stop the vehicle in a safe and legal manner

before attempting these operations.

167

Download User Manual App

MULTIMEDIA for Your Fiat Punto SUV 2011-2018

Related Topics

Popular Owner Manuals

Latest Owner Manuals