IV-5
65
L E V E L S
Topping up the cooling system
The coolant level should be between the MAXIMUM and
MINIMUM marks on the header tank.
Top up the level. If more than I litre is required to top up, have
the cooling system checked by your dealer.
Ensure that the cap is fully tightened to the second
notch.
Note: Frequent topping up could indicate a fault within the cooling system.
Have it checked as soon as possible.
The replacement of the coolant must be carried out by the dealer network.
Coolant
Radiator - coolant
The antifreeze in the coolant protects against low temperatures and provides
anti-corrosion protection and resistance to high operating temperatures.
However these properties degrade progressively with time.
The coolant must only be checked
or topped up if the engine is cold.
Oil quality: see « Lubricants and fluids ».
Engine hot:
Wait 15 minutes or until the tempe-
rature is below 100 degrees C.
Using a cloth to protect your hands,
slowly slacken the filler cap as far
as the safety catch. Allow the pres-
sure to reduce before removing
filler cap.
Beware:
When working under the bonnet, the cooling fan could operate if the engi-
ne is hot (even when switched off).