Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

Access -> Back-up procedures for Your Fiat Scudo Van Third Generation (2022-2025)

Access  
With the remote control  
With electric sliding side door(s)  
identification documents and if possible, the label  
bearing the key code.  
The Fiat Dealership will be able to retrieve the  
key code and the transponder code, enabling a  
new key to be ordered.  
2
To deadlock the vehicle, press this  
button.  
► Then within five seconds after locking,  
press this button again.  
► With the Keyless Entry and Start on your  
person, to lock the vehicle fully, press the  
markings on one of the front door handles.  
To deadlock the vehicle, press the markings  
again within five seconds.  
Depending on version, the electric door  
mirrors fold at the same time.  
Complete unlocking/locking  
of the vehicle with the key  
With tailgate  
Use this procedure in the following situations:  
– Remote control battery discharged.  
– Remote control malfunction.  
– Vehicle battery discharged.  
– Vehicle in an area subject to strong  
electromagnetic interference.  
If the vehicle is not fitted with an alarm,  
deadlocking is confirmed by fixed  
illumination of the direction indicators for  
about two seconds.  
With Keyless Entry and Start on your  
person  
To lock the vehicle, the remote control must be in  
recognition zone A.  
In the first case, change the remote control  
battery.  
In the second case, reinitialise the remote  
control.  
Refer to the corresponding sections.  
► Insert the key into the door lock.  
► Turn the key towards the front/rear to unlock/  
lock the vehicle.  
► Turn the key towards the rear again within  
5 seconds to deadlock the vehicle.  
► With the Keyless Entry and Start on your  
person, press the tailgate locking control to lock  
the entire vehicle.  
To deadlock the vehicle, press the control  
again within five seconds.  
If the vehicle is not fitted with an alarm,  
deadlocking is signalled by fixed lighting  
of the direction indicators for approximately  
two seconds.  
To lock the vehicle fully, press the markings  
on one of the door handles (front door(s),  
manual sliding side door(s) or left-hand side-  
hinged door).  
To deadlock the vehicle, press the markings  
again within five seconds.  
If the vehicle is fitted with an alarm, it will  
not be activated when locking with the  
key.  
If the alarm is activated, the siren sounds  
when the door is opened; switch on the  
ignition to stop it.  
Back-up procedures  
Lost keys, remote control,  
electronic key  
Go to a Fiat Dealership with the vehicle's  
registration certificate, your personal  
33  
Access  
If the vehicle is unlocked with the key in  
the lock after locking it with the remote  
control or the Keyless Entry and Start  
system, all doors and the boot are  
unlocked.  
► Pull the interior door opening handle.  
Locking  
► Open the door.  
► For the side door, check that the child lock is  
not on. Refer to the corresponding section.  
► Open the left-hand side-hinged door.  
If the vehicle is unlocked with the key in the  
lock after locking it with the key, only the  
doors (front door and sliding side door(s)) are  
unlocked. The side-hinged doors and tailgate  
are not unlocked. Switching on the ignition  
unlocks them.  
► Insert the key into the latch aperture on the  
edge of the door (without forcing it) and slide the  
assembly upwards.  
Front passenger door  
► Remove the key.  
► Close the door and check from the outside  
that the vehicle is locked.  
Central locking not  
functioning  
Use these procedures in the following cases:  
– Central locking malfunction.  
Unlocking the tailgate  
Sliding side door  
– Battery disconnected or discharged.  
► Remove the black cap on the edge of the  
door, using the key.  
In the event of a malfunction of the  
central locking system, the battery must  
be disconnected to ensure that the vehicle is  
locked fully.  
► Insert the key in the aperture without  
forcing it, then without turning it, move the latch  
sideways towards the inside of the door.  
► Remove the key and refit the black cap.  
► Close the doors and check from the outside  
that the vehicle is locked.  
► From inside the vehicle, insert a small  
screwdriver into hole A on the lock to unlock the  
tailgate.  
Front left-hand door  
► Insert the key into the door lock.  
► Turn the key towards the rear of the vehicle  
to lock it, or towards the front to unlock it.  
Side-hinged doors  
Unlocking  
► Move the latch to the left.  
If the fault persists after closing again,  
the tailgate will remain locked.  
► Use the interior opening handle.  
Locking  
Front passenger door and sliding  
side door  
Unlocking  
► If fitted to your vehicle, check that the electric  
child lock is not on.  
34  
Access  
Changing the battery  
If the battery is flat, this warning lamp  
comes on, accompanied by an audible  
signal and the display of a message.  
Reinitialising the remote  
control  
Following replacement of the battery or in  
the event of a fault, it may be necessary to  
reinitialise the remote control.  
2
Battery type: CR2032/3 volts.  
Without Keyless Entry and Start  
► Insert the mechanical key (incorporated into  
the remote control) into the lock to open the  
vehicle.  
► Place the electronic key against the back-up  
reader on the steering column and hold it there  
until the ignition is switched on.  
With a manual gearbox, place the gear lever  
in neutral then fully depress the clutch pedal.  
With an automatic gearbox or drive  
selector, while in mode P, depress the brake  
pedal.  
► Switch on the ignition by pressing the  
"START/STOP" button.  
If the fault persists after reinitialisation, contact a  
Fiat Dealership or a qualified workshop without  
delay.  
► Unclip the cover by inserting a small  
screwdriver in the slot and lift the cover.  
► Remove the flat battery from its housing.  
► Put the new battery in place, respecting the  
polarity. Start by inserting it into the contacts  
located in the corner, then clip the cover onto  
the unit.  
► Reinitialise the remote control.  
For more information on Reinitialising the  
remote control, refer to the corresponding  
section.  
► Switch the ignition off.  
► Turn the key to position 2 (Ignition on).  
► Immediately press the closed padlock button  
for a few seconds.  
► Switch off the ignition and remove the key  
from the ignition switch.  
The remote control is now fully operational  
again.  
Do not throw remote control batteries  
away, as they contain metals that are  
harmful to the environment. Take them to an  
approved disposal point.  
35