Lighting and visibility
– Vehicles whose lighting is obscured (for
example, vehicles driving behind a safety
barrier on a motorway).
– Vehicles at the top or bottom of a steep
slope, on winding roads, on crossroads.
automatically when the sidelamps are switched
on.
The ambient lighting switches off automatically
when the sidelamps are switched off.
4
0
1
2
3
Empty (initial setting)
Partial load
Medium load
Programming
With audio system or touch screen
Maximum authorised load
Clean the windscreen regularly,
particularly the area in front of the
camera.
The internal surface of the windscreen can
also become misted around the camera.
In humid and cold weather, demist the
windscreen regularly.
Do not allow snow to accumulate on the
bonnet or roof of the vehicle as this could
obstruct the detection camera.
4 5 6 Not used
The activation, deactivation and
the choice of brightness of the
ambience lighting can be set via the vehicle
configuration menu.
0
1 or 2 people in the front seats (initial
setting)
5 people
6 to 9 people
Wiper control stalk
1
2
3
Before operating the wipers in wintry
conditions, clear any snow, ice or frost
from the windscreen and around the wiper
arms and blades.
Driver + maximum authorised load
4 5 6 Not used
Headlamp beam height
adjustment
Interior ambient lighting
Do not operate the wipers on a dry
windscreen. In extremely hot or cold
weather, check that the wiper blades are not
stuck to the windscreen before operating the
wipers.
The dimmed passenger compartment lighting
improves visibility inside the vehicle when the
light is poor.
After using an automatic car wash, you
may temporarily notice abnormal noises
and poorer wiping performance. You do not
need to replace the wiper blades.
Switching on
At night, the front roof lighting and panoramic
roof lighting (if fitted to your vehicle) comes on
To avoid inconvenience to other road users,
the height of the halogen headlamps must be
adjusted according to the load in the vehicle.
91
English 
