MULTIMEDIA for Your Fiat Tipo 4 Door Second Generation (2015-2026)

MULTIMEDIA  
TIPS, CONTROLS AND  
GENERAL INFO ......................... 227  
This chapter describes the main  
functions of the Uconnect™,  
Uconnect™ 7" HD infotainment  
systems that can be fitted on the  
vehicle.  
Uconnect™ 5 ............................ 229  
Uconnect™ 7” HD...................... 239  
Uconnect™............................... 253  
OFFICIAL TYPE APPROVALS ...... 264  
226  
procedure described in the paragraph  
below.  
contact with pointed or rigid objects  
which could damage its surface; use a  
soft, dry anti-static cloth to clean and  
do not press.  
do not use alcohol, petrol and  
derived products to clean the  
display lens, and make sure that the  
Uconnect™ system is switched off  
during cleaning.  
TIPS, CONTROLS  
AND GENERAL INFO  
Entering the secret code  
ROAD SAFETY  
When the system is switched on, if the  
code is requested, the display will show  
"Please enter Anti-Theft Code" followed  
by the screen showing a keypad to  
enter the secret code.  
Learn how to use the varied system  
functions before starting to drive.  
Read the instructions for the system  
carefully before starting to drive.  
203) 204)  
The secret code is made up of four  
digits from 0 to 9.  
prevent any liquid from entering the  
system: this could damage it beyond  
repair.  
RECEPTION  
CONDITIONS  
Uconnect™ 5" and 7" HD:  
Reception conditions change  
constantly while driving. Reception may  
be interfered with by the presence  
of mountains, buildings or bridges,  
especially when you are far away from  
the broadcaster.  
Use the graphic buttons on the  
display to enter the code digits.  
If an incorrect code is entered, the  
system displays "Incorrect Code" to  
notify the user of the need to enter the  
correct code.  
88) 89)  
ANTI-THEFT  
PROTECTION  
The system is equipped with an  
anti-theft protection system based on  
the exchange of information with the  
electronic control unit (Body Computer)  
on the car.  
After the 3 available attempts to  
enter the code, the system displays  
"Incorrect Code. Radio locked. Please  
wait for 30 minutes". After the text has  
disappeared it is possible to start the  
code entering procedure again.  
WARNING The volume may be  
increased when receiving traffic  
bulletins.  
This guarantees maximum safety and  
prevents the secret code from being  
entered after the power supply has  
been disconnected.  
NOTE The DAB frequency can be used  
in countries where digital transmission  
technology is available. The device  
will tuned to any frequency if the DAB  
button is pressed in a country where  
the service is not provided.  
Car radio passport  
(where provided)  
If the check has a positive outcome,  
the system will start to operate,  
whereas if the comparison codes are  
not the same or if the electronic control  
unit (Body Computer) is replaced,  
the system will ask the user to enter  
the secret code according to the  
This document certifies ownership of  
the system. The car radio passport  
shows the system model, serial  
number and secret code.  
CARE AND  
MAINTENANCE  
In case of loss of the car radio  
passport, contact the Fiat Dealership,  
Observe the following precautions to  
ensure the system is fully operational:  
the display lens should not come into  
227  
taking an ID document and the car  
ownership documents.  
WARNING  
88) Only clean the front panel and the  
display lens with a soft, clean, dry,  
anti-static cloth. Cleaning and polishing  
products may damage the surface. Never  
use alcohol, petrols and derivatives.  
89) Do not use the display as a base for  
supports with suction pads or adhesives  
for external navigators or smartphones or  
similar devices.  
WARNING Keep the car radio passport  
in a safe place so that you can give the  
information to the relevant authorities if  
the system is stolen.  
WARNINGS  
Look at the screen only and when it  
is necessary and safe. If you need to  
look at the screen for a long time, pull  
over to a safe place so as not to be  
distracted while driving.  
Immediately stop using the system  
in the event of a fault. Otherwise the  
system might be damaged.  
Contact a Fiat Dealership as soon as  
possible to have the system repaired.  
IMPORTANT  
203) Follow the safety rules below:  
otherwise serious injuries may occur to  
the occupants or the system may be  
damaged.  
204) If the volume is too loud this can  
be dangerous. Adjust the volume so that  
you can still hear background noises (e.g.  
horns, ambulances, police vehicles, etc.).  
228  
Uconnect™ 5  
CONTROLS ON FRONT PANEL  
233  
P2001039  
229  
FRONT CONTROL PANEL SUMMARY TABLE  
ꢀ
Button  
RADIO  
MEDIA  
Functions  
Source selection: AM, FM, DAB (where provided)  
Source selection: USB, Bluetooth® audio  
Switching on  
Mode  
Brief button press  
Brief button press  
Brief button press  
Brief button press  
Left/right rotation of knob  
Brief button press  
Brief button press  
VOL  
Switching off  
Volume adjustment  
Volume activation/deactivation (Mute/Pause)  
Activation/deactivation of Play (playback) / Pause function  
Radio source: Select the radio station stored under "Preset 1"  
Media source: On/Off random playback of tracks in the device  
Brief button press  
Long button press  
Brief button press  
1
2
Radio source: Store the radio station currently playing under "Preset  
1"  
Radio source: Select the radio station stored under "Preset 2"  
Media Mode: Select the previous track  
Radio source: Store the radio station currently playing under "Preset  
2"  
Media Source: Fast backward track playback  
Long button press  
USB port  
–
Radio source: Select the radio station stored under "Preset 3"  
Media source: Select the next track  
Brief button press  
3
Radio source: Store the radio station under "Preset 3"  
Media source: Activate quick search function  
Long button press  
230  
Button  
4
Functions  
Mode  
Brief button press  
Radio source: Select the radio station stored under "Preset 4"  
Media source: On/Off repeat tracks in USB device  
Radio source: Store the radio station currently playing under "Preset  
4"  
Long button press  
Brief button press  
Brief button press  
Access the settings menu  
Confirmation of the option displayed  
Open browsing list (Radio or Media mode)  
Scrolling the list or tuning to a radio station  
Display list of stations (Radio mode)  
Scroll contents of sources (Media mode)  
Media source track change  
BROWSE ENTER  
Left/right rotation of knob  
Station change (RADIO mode)  
Exit the selection/return to previous screen  
Brief button press  
Brief button press  
Phone mode selection and acceptance of incoming phone call  
Acceptance of the second incoming call and putting the active call  
on hold  
Rejection of incoming call  
Ending of call in progress  
Brief button press  
231  
STEERING WHEEL CONTROLS  
(where provided)  
The controls for the main system functions are present on the steering wheel to make control easier.  
The activation of the function selected is controlled, in some cases, by how long the button is pressed (short or long press) as  
described in the table below.  
234  
P2000304  
232  
STEERING WHEEL CONTROLS SUMMARY TABLE  
ꢀ
Key (for versions/markets  
where provided)  
Interaction  
Acceptance of incoming call  
Acceptance of the second incoming call and putting the active call on hold  
Rejection of incoming call  
Ending of call in progress  
Activation of "Siri" function recognition (where provided) or phone voice assistant (where provided)  
Brief press: interruption of the voice message in order to give a new voice command  
Long press: activate voice command recognition or close voice recognition if session is already active  
(for versions/markets, where  
provided)  
233  
CONTROLS BEHIND THE STEERING WHEEL  
ꢀ
Buttons  
Interaction  
Button 1 (steering wheel left side)  
Brief button press: search for next radio station or selection of USB next track.  
Long button press: scan of higher frequencies until released/fast forward of USB  
track.  
Upper button  
Central button  
With each press it scrolls through the DAB sources (where provided) FM, AM, USB, BT  
AUDIO  
Only the available sources will be selected.  
Brief button press: search for next radio station or select USB previous track.  
Long button press: scan of lower frequencies until released/fast forward of USB track.  
Lower button  
Button 2 (steering wheel right side)  
Increasing volume  
Brief button press: single volume increase  
Long button press: fast volume increase  
Upper button  
Central button  
Lower button  
Activation/deactivation of Mute function  
Decreasing volume  
Brief button press: single volume decrease  
Long button press: fast volume decrease  
234  
for the DAB function and then select  
one of the following options:  
"Preset": this displays the list of  
stored presets;  
"Available Stations": this displays the  
list of available DAB stations;  
"Genres": to search for a category  
by choosing from the various available  
genres.  
SYSTEM ON / OFF  
The system is switched on by briefly  
pressing the VOL button/knob on the  
front panel.  
In the lower part: display additional  
information (if available) of the radio  
station you are listening to.  
FM station list  
Press the BROWSE ENTER  
button/knob to display the complete list  
of the FM stations that can be received.  
The system is switched off by long  
pressing the VOL button/knob on the  
front panel.  
RADIO MODE SELECTION  
To activate the Radio mode press  
the RADIO button on the front panel.  
The display will show the active  
frequency mode (AM, FM or DAB - for  
versions/markets, where provided).  
SETTING THE PRESETS  
The preset stations are available in all  
system modes and are selected by  
touching one of the presetting buttons  
1-2-3-4 on the front panel.  
RADIO STATION  
ALPHABETIC SELECTION  
Using the "ABC" function, you can,  
according to the selected letter,  
position yourself alphabetically on the  
first of the available FM or DAB (for  
versions/markets, where provided)  
stations for that letter.  
If you are tuned to a radio station  
that you wish to store, hold down  
the button on the display which  
corresponds to the desired preset.  
SELECTING A  
FREQUENCY BAND  
Briefly press the RADIO button on  
the front panel to select the desired  
frequency band.  
RADIO STATION  
SELECTION  
SEARCH FOR STORED  
RADIO STATION  
INFORMATION ON THE  
DISPLAY  
To search for the desired radio station  
as follows:  
Briefly press the 2  
or 3  
buttons on the front panel. When  
released, the station stored at buttons  
2 or 3 respectively is displayed.  
When searching by turning the  
BROWSE/ENTER button/knob, if  
the system reaches the last station  
after scanning the entire band, it will  
automatically stop on the station from  
which the search started.  
After the desired radio station is  
selected, the following information is  
shown on the display:  
press the BROWSE/ENTER  
button/knob to access the Radio  
menu;  
select "Available Stations";  
turn the BROWSE ENTER  
button/knob clockwise or  
anticlockwise;  
In the upper part: currently selected  
frequency band display (AM, FM or  
DAB - for versions/markets, where  
provided).  
press the BROWSE ENTER  
button/knob to confirm.  
In the central part: display name (if  
available), frequency and storage  
number (within the list of favourite radio  
stations) of the listening radio station.  
PREVIOUS / NEXT RADIO  
STATION FAST SEARCH  
Press the buttons of Button 1 of  
the steering wheel controls (if the  
Selecting a DAB radio category  
To select one of the DAB radio  
categories activate the "Browse" menu  
235  
Frequency Search option is selected in  
Settings) to perform the quick search:  
when the buttons are released, the first  
tunable radio station is played.  
SONG FAST FORWARD  
Folders  
Turn the BROWSE ENTER button/knob  
to select the desired option and then  
press the button/knob to confirm the  
selection.  
Long press button 3  
the selected song.  
to fast-forward  
Long press button 2 to quickly  
reverse the selected song.  
MEDIA MODE  
NOTE If you insert a USB flash drive  
into the port on the front panel, if the  
"Autoplay" function is ON, all files in all  
folders will be played automatically.  
WARNING After using a USB charging  
port, disconnect the device, always  
removing the cable from the car socket  
first, never from the device. Cables left  
flying or connected incorrectly could  
compromise correct recharging and/or  
the USB socket condition.  
A dedicated messages will appear  
on the display if no Media device  
is connected to the system or if  
the connected Media source is not  
recognised by the system.  
SHUFFLE  
Press button 1 on the front  
panel to play the tracks on USB or  
®
Bluetooth in a random order.  
®
REPEAT  
NOTE Audio from the Bluetooth  
connected device does not play in  
Press button 4  
function.  
to activate the  
RADIO (AM, FM or DAB) modes, only in  
®
The following functions are available:  
"Repeat all": repeat all songs;  
"Repeat one": repeat the single song;  
"Repeat off": deactivate the function.  
Bluetooth MEDIA mode.  
CHANGE TRACK  
(next/previous)  
PHONE MODE  
Turn the BROWSE ENTER button/knob  
clockwise to play the next track turn  
the BROWSE ENTER button/knob  
anticlockwise to go back to the  
beginning of the selected track or to  
the beginning of the previous track if  
the current one has been playing for  
less than 3 seconds.  
Phone mode activation  
To activate Phone mode, register  
your phone to the system using  
USB MODE  
To activate the USB mode, insert a  
USB flash drive into the USB port on  
the front panel. The display will show  
the first track available in play.  
Press the BROWSE/ENTER button to  
open the following:  
®
Bluetooth  
.
The following options will appear on the  
display:  
"Browse": to view the list of  
"Contacts", "Recent Calls" and the  
graphic keypad on the system display;  
"Settings": this can be used to  
access the "Settings" menu related to  
Phone mode, including connecting or  
registering a new phone.  
NOTE The BROWSE/ENTER knob  
is not supported by Apple devices  
connected via USB.  
All tracks  
Artists  
Albums  
Genres  
Playlists  
Podcasts (Apple devices only)  
Audiobooks (for Apple devices only)  
Short press button 3  
next track.  
to play the  
Short press button 2  
previous track.  
to play the  
Turn the BROWSE ENTER button/knob  
to select the desired option and then  
236  
correctly in the device, a pop-up  
message will appear on the display to  
start the procedure.  
press the button/knob to confirm the  
selection.  
Pairing of a Bluetooth® mobile  
phone  
The system connects automatically  
to the paired mobile phone with the  
highest priority.  
Pairing a mobile phone  
The 6-digit confirmation screen  
automatically replaces the previous one  
and driver confirmation is required on  
both the device and the system. Once  
the PIN has been confirmed, both on  
the system and the paired device,  
the pairing procedure will start. If the  
pairing procedure is successful, the  
new device is recorded and connected  
as audio and phone mode.  
The pairing procedure for a mobile  
phone is described below: always  
consult the handbook for the mobile  
phone in any case.  
To select a mobile phone or a specific  
Bluetooth® audio device, proceed as  
follows:  
Access the "Settings" menu of the  
Phone;  
turn the BROWSE ENTER  
button/knob to select the "Pair new  
phone" option: a dedicated screen will  
appear on the display.  
access the "Settings" menu of the  
Phone;  
turn the BROWSE ENTER  
button/knob and select the "Connect"  
option;  
The driver will be prompted whether  
to download the phonebook or not.  
If the connected device has "Siri" or  
another Voice Assistant function, the  
corresponding icon will appear on the  
system display.  
press the BROWSE/ENTER  
button/knob to confirm the selection: a  
dedicated screen will appear on the  
display.  
The "Settings" Menu can be accessed  
by selecting the "Settings" button in  
the "Phone" Menu, or by pressing the  
"OK" button in the "Phone" Main Menu  
(when no mobile phone is connected).  
After selecting it, the "Pair new phone"  
pairing procedure will start if the speed  
of the car is below the maximum  
permitted threshold.  
Unpairing of a Bluetooth® mobile  
phone  
NOTE The priority is determined  
according to the order of connection.  
The first connected phone will have the  
highest priority and will be the first  
device displayed on the list.  
To disconnect a specific mobile phone  
or Bluetooth® audio device, proceed  
as follows:  
access the "Settings" menu of the  
Phone;  
turn the BROWSE ENTER  
button/knob and select the "Delete"  
option;  
press the BROWSE/ENTER  
button/knob to confirm the selection: a  
dedicated screen will appear on the  
display.  
If the car speed exceeds this threshold,  
the message "Function not available  
while vehicle is in motion" will appear  
on the display.  
Pairing a Bluetooth® audio device  
The pairing procedure of an audio  
device is performed by pressing the  
PHONE button on the front panel and  
selecting "Settings". The display will  
show information (if available) about  
the connected device, the pairing was  
successful.  
If the pairing process can start when  
"Pair new phone" is selected pop-up  
screen indicating the device name and  
a random 4-digit PIN will appear on the  
display.  
When the car name is selected, and  
if the 4-digit PIN has been entered  
Making a phone call  
A call can be made by:  
selecting a contact in the phonebook  
237  
"Radio"  
"Rear View Camera"  
and then selecting "OK" press  
Proceed as follows to interact with  
"Siri":  
BROWSE/ENTER key to start the call;  
by dialling a phone number using the  
graphic keypad on the display and then  
selecting the "Call" option;  
with the mobile phone and continue  
using the system (never allow yourself  
to be distracted while driving). When  
a phone number is dialled with the  
keypad of the mobile phone, the audio  
of the call is played over your car's  
sound system.  
pair the "Siri" enabled device with the  
UConnect™ system;  
Audio  
The following adjustments can be  
carried out using the "Audio" menu:  
“Bass”;  
“Medium”;  
“Treble”;  
"Balance";  
"Fade" (only available with rear  
speakers);  
"Loudness" (where provided);  
"Speed-dependant volume";  
"Volume limits at startup”.  
press and release the button  
on  
the steering wheel. When you hear the  
double beep, the system is ready and  
you can interact with "Siri" to impart the  
desired commands.  
Voice assistant  
(only available with Android compatible  
mobile phones)  
Answering a call  
The "Voice Assistant" function can be  
used to use your voice to send text  
messages, play the content of the  
device, make phone calls and much  
more. "Voice Assistant" understands  
and replies in natural language and  
interacts with requests.  
To answer the incoming call, press the  
PHONE button on the front panel or  
on the steering wheel controls.  
System  
The following adjustments can be  
carried out using the "System" menu:  
"Auto-on"  
"Radio Off Delay"  
"Autoplay"  
"Restore Default"  
"Clear Personal Data"  
"Steering Wheel Seek Buttons"  
Ending a call  
To end a call, press the  
button on  
the front panel or on the steering wheel  
controls.  
Proceed as follows to interact with  
Voice Assistant:  
Siri Eyes Free  
pair the "Voice Assistant" enabled  
device with the UConnect™ system;  
(available only with iPhone 4S and  
subsequent versions and compatible  
iOS versions)  
press the  
button on the steering  
REAR CAMERA  
(Parkview® Rear Back  
Up Camera)  
wheel (long press). The system is  
ready and you can interact with "Voice  
Assistant" to impart the desired  
commands.  
The "Siri" function can be used to use  
your voice to send text messages, play  
the content of the device, make phone  
calls and much more. Siri understands  
and replies in natural language and  
interacts with requests.  
The car may be equipped with a  
ParkView® Rear Back Up Camera,  
which shows an image of the area  
surrounding the rear of the car on the  
system display.  
SETTINGS  
Press the  
button on the front  
panel to display the "Settings" menu, .  
The menu includes the following items:  
"Audio"  
It is possible to view the images of the  
camera when the car reverse gear is  
engaged.  
"System"  
238  
Uconnect™ 7” HD  
CONTROLS ON FRONT PANEL  
235  
P2000306  
239  
FRONT CONTROL PANEL SUMMARY TABLE  
ꢀ
Button  
Functions  
Switching on  
Mode  
Brief button press  
Brief button press  
Left/right rotation of knob  
Switching off  
Volume adjustment  
Volume activation/deactivation (Mute/Pause)  
Display on/off  
Brief button press  
Brief button press  
Exit the selection/return to previous screen  
Brief button press  
Scrolling the list or tuning to a radio station;  
media source track change  
radio station change if in tuner mode  
Left/right rotation of knob  
BROWSE ENTER  
Confirmation of the option displayed;  
display the list of stations if in Radio mode;  
scroll the contents of the sources if in Media mode;  
open the browsing list if in Radio or Media mode  
Brief button press  
240  
SUMMARY TABLE OF DISPLAY BUTTONS  
ꢀ
Graphic button  
Functions  
Mode  
Radio  
Access to the Radio mode  
Press graphic button  
®
Media  
Phone  
Press graphic button  
Press graphic button  
Source selection: USB, Bluetooth  
Access to the Phone mode  
Access to the system functions (Audio, Media, Phone,  
Radio etc)  
Uconnect  
Press graphic button  
Settings  
Trip  
Access the settings menu  
Access to the Trip menu  
Press graphic button  
Press graphic button  
241  
STEERING WHEEL CONTROLS  
The controls for the main system functions are present on the steering wheel to make control easier.  
The activation of the function selected is controlled, in some cases, by how long the button is pressed (short or long press) as  
described in the table below.  
236  
P2000304  
242  
STEERING WHEEL CONTROLS SUMMARY TABLE  
ꢀ
Button  
Interaction  
Acceptance of incoming call  
Acceptance of the second incoming call and putting the active call on hold  
A list of the last 10 calls is displayed on the instrument panel (available in versions and markets where  
present)  
Activation of voice recognition  
Interruption of the voice message in order to give a new voice command  
Interruption of voice recognition  
Long press: interaction with Siri, Apple CarPlay and Android Auto  
Rejection of incoming call  
Ending of call in progress  
The last calls are viewed on the instrument panel only with call browsing active (available for versions  
and markets where present)  
Short press (phone mode): selection of next/previous call or text message (only with call browsing  
active) on the instrument panel (available in versions and markets where present)  
243  
CONTROLS BEHIND THE STEERING WHEEL  
ꢀ
Buttons  
Interaction  
Button 1 (steering wheel left side)  
Brief button press: search for next radio station or selection of USB next track.  
Long button press: scan of higher frequencies until released/fast forward of USB  
track.  
Upper button  
Central button  
With each press it scrolls through sources AM, FM, USB.  
Only the available sources will be selected.  
Brief button press: search for next radio station or select USB previous track.  
Long button press: scan of lower frequencies until released/fast forward of USB track.  
Lower button  
Button 2 (steering wheel right side)  
Increasing volume  
Brief button press: single volume increase  
Long button press: fast volume increase  
Upper button  
Central button  
Lower button  
Activation/deactivation of Mute function  
Decreasing volume  
Brief button press: single volume decrease  
Long button press: fast volume decrease  
244  
SWITCHING THE SYSTEM  
ON/OFF  
The system is switched on/off by  
After Media mode is selected, the  
following information is shown on the  
display:  
/
station;  
: selecting previous/next radio  
"Tune" : manual radio station tuning;  
"Audio": access to the "Audio  
Settings" screen.  
pressing the button/knob  
.
At the top: information on the track  
being played and the following graphic  
buttons:  
Turn the button/knob clockwise  
to increase the radio volume or  
anticlockwise to decrease it. The  
electronic volume adjustment control  
rotates continuously (360°) in both  
directions, without stop positions.  
Audio menu  
"Repeat": to repeat the track being  
played;  
“Shuffle": to play the tracks in  
random order;  
To access the "Audio" menu press the  
Audio" button located at the bottom of  
the display.  
The following adjustments can be  
carried out using the "Audio" menu:  
“Balance & Fader" (left/right and  
front/rear audio balance adjustment);  
"Equalizer" (where provided);  
“Speed Adj Volume" (speed-  
dependent automatic volume control);  
"Loudness" (where provided);  
“AutoPlay”;  
Track progress and duration.  
In the middle: information on the track  
being played.  
RADIO MODE  
After the desired radio station is  
selected, the following information is  
shown on the display:  
On the left: display of the following  
buttons:  
At the top: the list of radio stations  
stored (preset) is displayed; the station  
currently playing is highlighted.  
At the centre: the name of station  
being listened too is displayed.  
On the left side: the "AM", "FM",  
"DAB” (for versions/markets, where  
provided) buttons to select the desired  
frequency band are displayed (the  
button corresponding to the selected  
band is highlighted).  
Selected device or audio source;  
"Select source": select the required  
audio source.  
On the right: display of the following  
buttons:  
"Auto-On Radio".  
MEDIA MODE  
Press the "Media" graphic button to  
select the desired audio source among  
"Info": additional information about  
the song playing;  
"Tracks": list of available tracks;  
At the bottom: information on the  
track being played and the following  
graphic buttons:  
®
those available: USB and Bluetooth .  
WARNING Applications used  
on portable devices may be not  
compatible with the Uconnect™  
system.  
On the right: display of the following  
buttons:  
®
"Bluetooth”: for a Bluetooth audio  
source, opens the list of devices;  
"Browse" for a USB source, opens  
browsing;  
"Info": additional information on the  
source being listened to;  
At the bottom: display of the following  
buttons:  
/
previous/next track selection;  
: pause track being played;  
"Browse": list of the radio stations  
available;  
245  
"Audio": access to the "Audio  
Settings" screen.  
press the "Select Source" button;  
®
®
after the Bluetooth connection.  
select the Bluetooth Media  
After updating the phone software, for  
proper operation, it is recommended  
to remove the phone from the list of  
devices linked to the radio, delete the  
previous system pairing also from the  
source;  
press the "Add Device" graphic  
button;  
Track selection  
The “Tracks” function allows you to  
open a window with the list of tracks  
being played.  
search for Uconnect™ on the  
®
Bluetooth audio device (during the  
®
list of Bluetooth devices on the  
phone and make a new pairing.  
The choices available depend on the  
device connected. For example, on  
a USB device you can also use the  
pairing stage a screen is displayed  
showing the progress of the operation);  
when requested by the audio device,  
enter the PIN code shown on the  
system display or confirm on the device  
the PIN displayed;  
if the pairing procedure is completed  
successfully, a screen is displayed.  
Answer “Yes” to the question to pair  
®
BROWSE ENTER button/knob  
or  
WARNING If the Bluetooth  
connection between mobile phone  
and system is lost, consult the mobile  
phone handbook.  
to scroll through the list of artists,  
genres and albums available on the  
device, depending on the information  
present on the tracks.  
Within each list, the "ABC" graphic  
button allows the user to skip to the  
desired letter in the list.  
USB SOURCE  
®
To activate the USB mode, insert the  
corresponding USB device into the  
USB port on the central console.  
When a USB device is inserted with the  
radio on, it starts to play the tracks on  
the device if the "AutoPlay" is set to ON  
in the "Audio" menu.  
the Bluetooth audio device as  
favourite (the device will have priority  
over all other devices to be paired  
subsequently). If "No" is selected, the  
priority is determined according to the  
order of connection. The last device  
connected will have the highest priority;  
an audio device can also be  
paired by pressing the "Phone"  
graphic button on the display and  
by selecting "Settings" or selecting  
"Phone/Bluetooth" from the "Settings"  
menu.  
NOTE This button might be disabled for  
®
some Apple devices.  
®
Bluetooth SOURCE  
This mode is activated by pairing a  
®
Bluetooth device containing music  
tracks with the system.  
NOTE The Radio may change the track  
being played by modifying the name-  
device in the Bluetooth settings of the  
phone (where provided), if the device is  
connected via USB after the Bluetooth  
connection.  
®
PAIRING A Bluetooth  
AUDIO DEVICE  
®
To pair a Bluetooth audio device,  
proceed as follows:  
NOTE When modifying the name-  
®
NOTE The Uconnect™ system may  
not support some USB keys: in this  
case, it will not automatically switch  
from “Radio” mode to “Media” mode. If  
the device used does not play, verify its  
®
activate the Bluetooth function on  
the device;  
device in the Bluetooth settings of  
the phone (where provided), the Radio  
may change the track being played  
if the device is connected via USB  
press the "Media" graphic button on  
the display;  
246  
compatibility by selecting Media mode:  
a dedicated message will appear on  
the Uconnect™ system display.  
The mobile phone audio is transmitted  
through the car’s sound system; the  
system automatically mutes the radio  
when the Phone function is used.  
WARNING After using a USB charging  
port, we recommend disconnecting the  
device (smartphone), always removing  
the cable from the car port first, never  
from the device fig. 237 or fig. 238 (for  
versions/markets where provided).  
Cables left flying or connected  
incorrectly could compromise correct  
recharging and/or the USB socket  
condition.  
Pairing a mobile phone  
WARNING Carry out this operation  
only with car stationary and in safety  
conditions; this function is deactivated  
when the car is moving.  
238  
P2001044  
The pairing procedure for a mobile  
phone is described below: always  
consult the handbook for the mobile  
phone in any case.  
PHONE MODE  
Phone mode activation  
Press the “Phone” graphic button on  
the display to activate the Phone mode.  
NOTE To consult the list of mobile  
phones and supported functions, visit  
the  
Use the graphic buttons on the display  
to:  
To pair the mobile phone, proceed as  
follows:  
NOTE The USB port handles  
data transmission from the Pen  
Drive/Smartphone, etc. and slow  
recharging, which is not guaranteed as  
it depends on the device type/brand of  
the external device itself.  
®
activate the Bluetooth function on  
the mobile phone;  
press the "Phone" graphic button on  
the display;  
if no phone is paired with the system  
yet, the display shows a dedicated  
screen;  
access “Settings” and select “Add  
device” to start the pairing procedure,  
then search for the Uconnect™ device  
on the mobile phone;  
when prompted by the mobile  
phone, use its keypad to enter the PIN  
code shown on the system display or  
confirm on the mobile phone the PIN  
displayed;  
dial the phone number (using the  
graphic dial pad on the display);  
display and call the contacts in the  
phonebook of the mobile phone;  
display and call contacts from the  
registers of previous calls;  
pair up to 10 phones/audio device  
to make access and connection easier  
and quicker;  
transfer calls from the system to  
the mobile phone and vice versa and  
deactivate the microphone audio for  
private conversations.  
237  
P2001043  
247  
for a device registered as Uconnect™.  
After enabling this function on the  
mobile phone, it must be disconnected  
and reconnected with the Uconnect™  
system in order to make it effective.  
during the pairing stage a screen  
appears on the display showing the  
progress of the operation;  
Favourites  
You can add a number or a contact (if  
already in Contacts) to the favourite list  
during a call by pressing one of the 5  
"Empty" graphic buttons on the upper  
part of the display. The favourites can  
also be managed by using the Phone  
Book options.  
when the pairing procedure is  
completed successfully, a screen  
is displayed: answer "Yes" to the  
question to pair the mobile phone as  
favourite (the mobile phone will have  
priority over all other mobile phones  
to be paired subsequently). If no other  
devices are paired, the system will  
consider the first paired device as the  
favourite.  
WARNING Some mobile phones may  
not take the text message delivery  
confirmation settings into account  
when interfacing with Uconnect™.If  
a text message is sent via the  
Uconnect™ system, the driver could  
face an additional cost, without any  
warning, due to the text message  
delivery confirmation request sent by  
the phone. For any problems related  
to the above, contact your telephone  
service provider.  
Text Message Reader  
The system can read the messages  
received by the mobile phone. To use  
this function, the mobile phone must  
support the text exchange function  
NOTE To ensure proper operation  
after updating the phone software, it is  
recommended to remove the phone  
from the list of devices linked to the  
radio, delete the previous system  
®
through Bluetooth .  
If this operation is not supported by  
the phone, the corresponding "Text  
message" graphic button is deactivated  
(greyed out).  
®
pairing also from the list of Bluetooth  
devices on the phone and make a new  
pairing.  
When a text message is received,  
the display will show a screen where  
the options "Read", "Show", "Call" or  
"Ignore" can be selected.  
"Do Not Disturb" function  
If supported by the connected phone,  
by pressing the "Do Not Disturb"  
graphic button the user will not receive  
notifications of incoming calls or text  
messages. The user can reply with a  
default or customized message by  
means of the settings.  
Making a phone call  
The operations described below can  
only be accessed if supported by the  
mobile phone in use. For all functions  
available, refer to the mobile phone  
owner's handbook.  
Press the "Text" graphic button to  
access the list of text messages  
received by the mobile phone (the list  
displays a maximum of 60 messages  
received).  
A call can be made by:  
Text message options  
Predefined messages are stored in the  
system memory and can be sent to  
answer a received message or as a  
new message:  
NOTE On some mobile phones, to  
make the text voice reading function  
available, the text notification option  
on the phone must be enabled; this  
option is usually available on the phone,  
selecting "Phonebook"  
selecting "Recent"  
selecting "Dial"  
selecting "Redial"  
®
Yes  
in the Bluetooth connections menu  
248  
No  
Okay  
I can't talk right now  
Call me  
I'll call you later  
I’m on my way  
Thanks  
I'll be late  
Stuck in traffic  
Start without me  
Where are you?  
Are you there yet?  
I need directions  
I'm lost  
See you later  
I will be 5 (or 10, 15, 20, 25, 30, 45,  
60) (*) minutes late  
the mobile phone must support  
the text exchange function through  
Apple CarPlay AND  
Android Auto  
(where provided)  
®
Bluetooth .  
NOTE The date and time shown on  
the Uconnect™ system display must  
match the actual date and time, even  
after disconnecting the of the battery.  
Adjust using the settings menu. Any  
discrepancy between the date and  
time on the display and the actual date  
and time may be due to a malfunction  
in Apple CarPlay/Android Auto (for  
versions/markets, where provided).  
The Apple CarPlay and Android Auto  
applications allow you to use your  
smartphone in the car safely and  
intuitively. To enable them, just connect  
a compatible smartphone via the  
USB port and the phone contents  
will be automatically shown on the  
Uconnect™ system display.  
Select "Phone” on the instrument  
panel Setup Menu and then select  
"SMS reader” using the steering wheel  
controls. The "SMS reader" submenu  
allows the last 10 SMS messages to be  
displayed.  
Browsing favourites  
(where provided)  
Using the steering wheel controls, you  
can view and manage your favourite  
phone numbers on the instrument  
panel display. To use this function,  
the mobile phone must support  
text exchange function through  
See you in 5 (or 10, 15, 20, 25, 30,  
45, 60) (*) minutes  
®
Bluetooth and the favourite numbers  
(*) Only use the numbers listed,  
otherwise the system will not take  
the message. When receiving a text  
message, the systems also allows the  
same message to be forwarded.  
NOTE For details on how to send an  
text using the voice commands, refer to  
the dedicated paragraph.  
must have been saved previously as  
such in the Uconnect™ system.  
Use the steering wheel controls to  
select "Phone” on the instrument panel  
Setup Menu. If the phone is connected,  
select the "Favourite numbers" option:  
the "Favourite numbers" submenu  
enables you to view and select the  
favourite number.  
To check the compatibility of your  
smartphone, refer to the indications on  
the websites:  
 
and  
If the smartphone is connected  
correctly to the car via the USB port,  
the Apple CarPlay or Android Auto icon  
will be displayed in place of the  
button in the main menu.  
Browsing text messages  
(where provided)  
If the "Phone" option is selected with  
the phone not connected, the list of  
favourite numbers cannot be viewed.  
Using the steering wheel controls, you  
can view and manage the last 10 text  
messages received on the instrument  
panel display. To use this function,  
249  
the "Display" submenu. The function is  
enabled by default.  
Android Auto APP Setup  
Interaction  
Before use, download the Android Auto  
application to your smartphone from  
Google Play Store.  
After the setup procedure, the  
application will run automatically on  
the Uconnect™ system when your  
smartphone is connected to the USB  
port in the car.  
NOTES  
®
Bluetooth is disabled while Apple  
CarPlay is being used  
The application is compatible with  
Android 5.0 (Lollipop) and later  
versions. To use Android Auto, the  
smartphone must be connected to the  
car with a USB cable.  
®
Bluetooth remains on while  
Android Auto is being used  
You can interact with Apple CarPlay  
and Android Auto using the steering  
The data connection will depend on  
the tariff plan of the smarphone  
This information may be subject  
to changes that depend on the  
smartphone's operating system.  
wheel button  
(long press of the  
button), using the BROWSE ENTER  
button/knob (to select and confirm)  
or using the Uconnect™ system  
touchscreen.  
On the first connection, you will have  
to perform the setup procedure that  
appears on the smartphone. You can  
only perform this procedure with the  
car stationary.  
Exiting the Android Auto and Apple  
CarPlay apps  
Navigation  
Once connected to the USB port, the  
Android Auto application establishes a  
With the Apple CarPlay and Android  
Auto applications, the driver can  
choose to use the navigation system  
on their smartphone.  
You can still access the contents of the  
Uconnect™ system with the CarPlay  
app enabled by using the controls  
available and viewable on its display.  
To return to the Uconnect™ system  
contents with the Android Auto app  
enabled, select the last item on the  
Android Auto system bar and select  
"Back to Uconnect".  
®
parallel Bluetooth connection.  
Apple CarPlay App Setup  
Apple CarPlay is compatible with the  
iPhone 5 or more recent models,  
with the iOS 7.1 operating system or  
later versions. Before using Apple  
CarPlay, enable Siri from "Settings"  
Setting “AutoShow smartphone  
display on connection"  
Through the Uconnect™ system  
settings, the user can decide to  
view the smartphone screen on the  
Uconnect™ system display as soon  
as the smartphone is connected via the  
USB port.  
To end the Apple CarPlay or Android  
Auto session, physically disconnect the  
smartphone from the USB port of the  
car.  
"General"  
"Siri" on the smartphone.  
To use Apple CarPlay, the smartphone  
must be connected to the car with a  
USB cable.  
When this function is set, each time a  
connection is made via USB, the Apple  
CarPlay or Android Auto apps will run  
automatically on the Uconnect™  
system display.  
NOTE Enabling CarPlay/Android Auto  
or some functions could require  
interaction on the smartphone.  
If necessary, complete the step on your  
device (smartphone).  
The "AutoShow smartphone display  
on connection" item can be found in  
250  
SETTINGS  
The options available are:  
"Rain sensor" (where provided):  
this function can be used to  
activate/deactivate the automatic  
operation of the wipers in the event of  
rain.  
- "Off": the system is deactivated;  
- "Warn + Act. Brk": the system  
intervenes by providing the driver with  
an acoustic warning and activating  
automatic braking.  
"Brake Control Sensitivity" (where  
provided): this function can be used  
to select the "readiness" of the Brake  
Control system to intervene, according  
to the distance from the obstacle. The  
options available are "Near", "Med",  
"Far".  
"Park Assist" (for versions/markets,  
where provided): this function can be  
used to select the type of warning  
provided by the Park Assist system.  
The options available are:  
- “Warning only”  
- “Warning + image”  
"Front Park Assist”  
The options available are: "Low",  
"Medium", "High".  
"Rear Park Assist”  
The options available are: "Low",  
"Medium", "High".  
"Rear View Camera Delay" (where  
provided): permits a delay in the  
disappearance of images from the  
camera when reverse is disengaged.  
"Active Rear View Camera  
Guidelines” (where provided): activates  
dynamic grids that indicate the  
trajectory of the vehicle on the display.  
Press the “Settings” graphic button on  
the display to show the main “Settings”  
menu.  
NOTE The menu items displayed vary  
according to the versions.  
As a guideline, the menu includes the  
following items:  
VOICE COMMANDS  
Note For languages not supported by  
the system, voice commands are not  
available.  
Display  
Units (where provided)  
Voice Commands  
Clock & Date  
Safety & Driving Assistance (where  
provided)  
Lights  
Doors & Locks  
Key off options  
Audio  
To use the voice commands, press  
the button on the steering wheel  
("Voice" button) and say out loud the  
command you want to activate.  
Global  
The following voice commands can be  
given after pressing the button on the  
steering wheel  
:
®
Phone/Bluetooth  
Radio Setup  
SiriusXM Setup (where provided)  
Restore Default Settings  
Clear Personal Data  
Help  
Cancel  
Repeat  
Voice tutorial  
Phone  
The following voice commands can be  
given after pressing the button on the  
Apps restore (where provided)  
Safety / Driving  
Assistance  
(where provided)  
steering wheel  
:
Call  
Dial  
This function can be used to carry out  
the following adjustments:  
"Brake Control" (where provided):  
this function can be used to select  
the Brake Control system intervention  
mode.  
Redial  
Call back  
Show recent calls  
251  
Show outgoing calls  
Show missed calls  
Show incoming calls  
Contacts  
Search  
Show text message  
Send a text message  
Show messages  
Radio  
The following voice commands can be  
given after pressing the button on the  
steering wheel  
:
Tune to FM "frequency"  
Tune to AM "frequency"  
Tune to "radio name" FM  
Tune to "radio name"  
Media  
The following voice commands can be  
given after pressing the button on the  
steering wheel  
:
Play song...  
Play album…  
Play artist…  
Play genre…  
Play playlist…  
Play podcast…  
Play audiobook…  
Select the source...  
View...  
252  
Uconnect™  
(where provided)  
239  
P2000325  
253  
GRAPHIC BUTTONS ON DISPLAY (1)  
ꢀ
Graphic button  
Functions  
Mode  
- Home  
- Media  
Show the main screen  
Press graphic button  
Access Media mode to select available  
sources, folder tracks and interaction with  
audio settings  
Press graphic button  
- Phone  
- Vehicle  
- App  
Access to the Phone mode  
Press graphic button  
Press graphic button  
Press graphic button  
Access to additional car settings and  
functions  
Access the list of available Apps  
You can customise the order of the buttons by holding down the icon to move and dragging it to the desired position.  
NOTE Customisation is only active when the car is stationary. If an attempt is made to customise with the car in motion or to resume driving  
without having completed the operation, a warning message will appear on the display and the operation will be ended.  
254  
STATUS BAR  
ꢀ
Area  
Functions  
Mode  
Press graphic button  
–
2
3
4
Profiles  
Access to the Profiles function  
Show notifications  
Notifications  
Compass  
Show compass information  
Press graphic button  
Display the current time / access the Apps  
list to customise the reconfigurable bar  
5
6
Time / App customisation  
Press graphic button  
Display notifications, audio track playing,  
tuned radio station, call time, volume and  
scrolling messages  
External temperature / Message area  
–
255  
STEERING WHEEL CONTROLS  
The controls for the main system functions are present on the steering wheel to make control easier.  
240  
P2000304  
Steering wheel controls summary table  
Button  
Interaction  
Acceptance of incoming call  
Acceptance of the second incoming call and putting the active call on hold  
Activation of voice recognition  
Interruption of the voice message in order to give a new voice command  
Interruption of voice recognition  
Interaction with Apple CarPlay and Android Auto (where provided)  
Rejection of incoming call  
Ending of call in progress  
256  
Controls behind the steering wheel  
Buttons  
Interaction  
Button 1 (steering wheel left side)  
Brief button press: search for next radio station or select next track.  
Long button press: fast forward the track / scan of higher frequencies until  
released.  
Upper button  
Each press scrolls through the AM, FM, DAB (where provided), USB and  
®
Central button  
Bluetooth sources.  
Only the available sources will be selected.  
Brief button press: search for previous radio station or select previous track.  
Long button press: fast rewind the track / scan of lower frequencies until  
released.  
Lower button  
Button 2 (steering wheel right side)  
Upper button  
Increasing volume  
Brief button press: single volume increase  
Long button press: fast volume increase  
Central button  
Activate/deactivate Mute function.  
Decreasing volume  
Brief button press: single volume decrease  
Long button press: fast volume decrease  
Lower button  
257  
the lists to the left; move your finger  
leftwards, to see the lists to the right  
of the screen. The same operation can  
be performed to move between pages.  
Press your finger on the chosen field or  
button to select the field or perform the  
function associated with the button.  
CONTROLS ON CENTRAL  
CONSOLE  
To confirm the selection, press the  
graphic button "OK" or tick the required  
selection. Confirmation of some  
functions or settings is accompanied  
by a dedicated chime.  
To go back to the previous screen,  
press the "X" (Delete) graphic button or,  
depending on the active screen  
.
HOT BUTTONS  
To go back to the home screen  
or home position press the HOME  
graphic button.  
Up to 4 hot buttons can be set up on  
the status bar ((1)/(3)/(4) fig. 239).  
Scroll the drop-down under the time  
((6) fig. 239) downwards to open the  
menu with the list of available apps.  
Hold the desired app pressed and  
drag it to the app to be replaced on the  
status bar.  
The touchscreen function can be used  
to access and view the available lists of  
music tracks, phone numbers, settings,  
etc.  
241  
P2000250  
Uconnect™ power on/off and Mute  
function on/off button. Volume  
adjustment knob.  
To close the pop-up message, press  
(where provided):  
"MUTE" function  
NOTE Customisation is only active  
when the car is stationary. If an attempt  
is made to customise with the car in  
motion or to resume driving without  
having completed the operation, a  
warning message will appear on the  
display and the operation will not be  
ended.  
Pressing the middle button on the  
controls on the right side behind the  
steering wheel ((2) fig. 240) or the  
fig. 241 button mutes audio tracks,  
radio stations, streaming from apps  
and the ringing of incoming calls.  
Pressing the fig. 241 or (2) fig. 240  
buttons again or turning the volume  
up/down restores the sound.  
"X" or "OK"  
"X" or "Yes"  
"X" or "Clear"  
"X" or "OK" or "Clear"  
Or, you can wait for the pop-up  
message to close automatically or  
press anywhere outside the pop-up.  
The pop-up message will not have a  
close button if it was opened from the  
sidebar.  
MEDIA MODE  
Press the "Media" graphic button to  
listen and manage your music, view the  
available lists and select your preferred  
audio settings.  
TOUCHSCREEN  
FUNCTION  
Move your finger on the screen to scroll  
lists and selections. Hold your finger  
down and move up to display the list  
items at the bottom; move down to  
display the list items at the top. Hold  
your finger down on the screen and  
move your finger rightwards, to see  
The system uses the touchscreen  
function; to interact with the different  
functions, press the graphic buttons  
displayed.  
WARNING Applications used  
on portable devices may be not  
258  
compatible with the Uconnect™  
system.  
the device;  
access the "Device Manager"  
function;  
: pause track being played;  
"Tuning": access the radio station  
selection page.  
press the "Add Device" button;  
a pop-up window shows the  
temporary PIN to be entered on the  
device;  
search for Uconnect™ on the  
Bluetooth® audio device;  
when requested by the audio device,  
enter the PIN code shown on the  
system display or confirm on the device  
the PIN displayed;  
if the pairing procedure is completed  
successfully, a screen is displayed.  
Answer “Yes” to the question to pair  
the Bluetooth® audio device as  
favourite (the device will have priority  
over all other devices to be paired  
subsequently). If "No" is selected, the  
priority is determined according to the  
order of connection. The last device  
connected will have the highest priority.  
If no device has been registered, you  
can access the "Device Manager"  
directly from the "Phone" function.  
NOTE Up to 20 device can be paired.  
In case of an attempt to pair a sixth  
device a pop-up window will notify that  
this is impossible. Remove a paired  
device to allow the pairing of a new  
one.  
After Media mode is selected, the  
following information is shown on the  
display:  
Lower part: Quick access to the  
favourite radio stations.  
Track selection  
Upper part: selection of the various  
pages of the "Source” (1), “FM  
playback" (2), "Browse" (3), "Audio" (4).  
Left part: Display of the user's three  
favourite sources. To choose the  
source, select "Source" and then  
choose the source to display. The  
source being played is shown in red.  
Middle part: Display of information  
about the track being played and  
playback control buttons:  
The “Tracks” function allows you to  
open a window with the list of tracks  
being played.  
The graphic buttons  
used to browse the list of artists, music  
and  
can be  
genres and albums on the connected  
®
device via USB or Bluetooth ,  
according to the information recorded  
on the tracks themselves.  
Within each list, the "ABC" graphic  
button allows the user to skip to the  
desired letter in the list.  
“Bluetooth”: for a Bluetooth® audio  
source, opens the list of devices;  
NOTE This button might be disabled for  
some Apple® devices.  
®
"Browse" for USB/Bluetooth  
source, allows you to search for  
content on your device;  
BLUETOOTH® MODE  
This mode is activated by pairing a  
Bluetooth® device containing music  
tracks with the Uconnect™ system.  
®
"Tracks" for USB/Bluetooth  
source, allows you to select a track  
from the playlist;  
/ : previous/next track selection  
or previous/next station;  
PAIRING A BLUETOOTH®  
AUDIO DEVICE  
: random playback of the tracks  
contained in the folder;  
: when the last track is finished,  
playback automatically resumes from  
the first track in the playlist;  
The pairing of a Bluetooth® device  
(e.g. a smartphone) is done via the  
"Device Manager" function on the  
"Phone" page.  
Proceed as follows to pair a device:  
activate the Bluetooth® function on  
259  
a smartphone is connected, only  
charging the device will be active.  
conditions; this function is deactivated  
when the car is moving.  
NOTE The Radio may change the track  
being played by modifying the from  
name of the device in the Bluetooth®  
settings of the telephone (where  
provided), if the device is by means of  
USB after the Bluetooth® connection.  
After updating the phone software, for  
proper operation, it is recommended  
to remove the phone from the list of  
devices linked to the radio, delete the  
previous system pairing also from the  
list of Bluetooth® devices on the  
phone and make a new pairing.  
PHONE MODE  
To pair a mobile phone, see the  
Press the “Phone” graphic button on  
the display to activate the Phone mode.  
NOTE To consult the list of mobile  
phones and supported functions, visit  
the  
Select the desired page on the display  
using the bar at the top to:  
®
procedure in "Pairing a Bluetooth  
audio device" in this chapter.  
Making a phone call  
The operations described below can  
only be accessed if supported by the  
mobile phone in use. For all functions  
available, refer to the mobile phone  
owner's handbook.  
dial the phone number using the  
graphic dial pad on the display;  
NOTE The keypad is only active when  
the car is stationary. If an attempt is  
made to use the keypad with the car  
in motion or if driving is resumed  
without having completed engagement,  
a warning message will appear on  
the display and the operation will be  
ended.  
You can make a call by selecting one of  
the following items:  
WARNING If the Bluetooth®  
connection between mobile phone  
and system is lost, consult the mobile  
phone handbook.  
"Keypad"  
"Recent"  
"Favourites"  
"Contacts"  
Favourites  
USB SOURCE  
You can add a number or a contact (if  
already in Contacts) to the favourite list  
during a call by pressing one of the 5  
"Empty" graphic buttons on the upper  
part of the display. The favourites can  
also be managed by using the Phone  
Book options.  
There are two USB ports. The first one  
is located on the dashboard for data  
transfer to the Uconnect™ system  
and for charging external devices;  
the second one is inside the central  
console for charging external devices  
only.  
display and call contacts from the  
registers of previous calls;  
display and call the contacts in the  
phonebook of the mobile phone;  
view the connected devices.  
The mobile phone audio is transmitted  
through the car’s sound system;  
the system automatically mutes the  
Uconnect™ system audio when the  
Phone function is used.  
When a USB device is plug into  
the port on the dashboard with the  
radio on, it starts to play the tracks  
on the device if the "AutoPlay" is set  
to "ON" in the "Audio" menu. If the  
"AutoPlay" function is set to OFF and  
Text Message Reader  
(Where provided)  
The system can read the messages  
received by the mobile phone. To use  
this function, the mobile phone must  
Pairing a mobile phone  
WARNING Carry out this operation  
only with car stationary and in safety  
260  
support the text exchange function  
through Bluetooth®.  
delivery confirmation request sent by  
the phone. For any problems related  
to the above, contact your telephone  
service provider.  
I'm lost  
See you later  
I will be 5 (or 2, 10, 15, 20, 25, 30,  
45, 60) (*) minutes late  
See you in 5 (or 2, 10, 15, 20, 25,  
30, 45, 60) (*) minutes  
If this operation is not supported by  
the phone, the corresponding "Text  
message" graphic button is deactivated  
(greyed out).  
"Do Not Disturb" function  
(*) Only use the numbers listed,  
otherwise the system will not take  
the message. When receiving a text  
message, the systems also allows the  
same message to be forwarded.  
NOTE For details on how to send a text  
message using the voice commands,  
refer to the dedicated paragraph.  
When a text message is received,  
the display will show a screen where  
the options "Read", "Show", "Call" or  
"Ignore" can be selected.  
If supported by the connected phone,  
by pressing the "Do Not Disturb"  
graphic button the user will not receive  
notifications of incoming calls or text  
messages. The user can reply with a  
default or customized message by  
means of the settings.  
You can access the text message  
list received by the cell by selecting  
the "Messages" item (the list shows a  
maximum of 60 received messages).  
NOTE On some mobile phones, to  
make the text voice reading function  
available, the text notification option  
on the phone must be enabled; this  
option is usually available on the phone,  
in the Bluetooth® connections menu  
for a device registered as Uconnect™.  
After enabling this function on the  
mobile phone, it must be disconnected  
and reconnected with the Uconnect™  
system in order to make it effective.  
Text message options  
Predefined messages are stored in the  
system memory and can be sent to  
answer a received message or as a  
new message:  
Apple CarPlay and  
Android Auto  
(where provided)  
The Apple CarPlay and Android Auto  
applications allow you to use your  
smartphone in the car safely and  
intuitively. To enable them, connect  
a compatible smartphone to the  
USB port of the car or in Wireless  
mode and the contents of the phone  
will be automatically shown on the  
Uconnect™ system display.  
To check the compatibility of your  
smartphone, refer to the indications on  
the websites:  
Yes  
No  
Okay  
I can't talk right now  
Call me  
I'll call you later  
I’m on my way  
Thanks  
I'll be late  
Stuck in traffic  
Start without me  
Where are you?  
Are you there yet?  
I need directions  
WARNING Some mobile phones may  
not take the text message delivery  
confirmation settings into account  
when interfacing with Uconnect™.If  
a text message is sent via the  
Uconnect™ system, the driver could  
face an additional cost, without any  
warning, due to the text message  
 
and  
If the smartphone is connected  
correctly to the car via the USB port or  
261  
in Wireless mode, the Apple CarPlay or  
Android Auto icon will be displayed in  
Wireless mode  
smartphone is connected to the USB  
port in the car.  
You can use Apple CarPlay and  
Android Auto in Wireless mode, without  
the need to connect your smartphone  
to the USB port.  
place of the  
main menu.  
graphic button in the  
Apple CarPlay: To interact with Apple  
CarPlay press the steering wheel  
button  
(short press of the button)  
Apple CarPlay App Setup  
Apple CarPlay is compatible with the  
iPhone 5 or more recent models, with  
the iOS 7.1 operating system or later  
versions.  
To configure this mode, follow the  
procedure for pairing a Bluetooth®  
device. If successfully completed  
and the connected device supports  
Wireless mode, confirm that it starts  
on the message shown on your  
smartphone and Uconnect™ display.  
On subsequent connections, Wireless  
mode is available automatically. If a  
Bluetooth® pairing is cancelled, the  
pairing procedure must be repeated on  
the "Device Manager" menu.  
or the "Home" graphic button on the  
display in Apple CarPlay.  
Android Auto: To interact with  
Android Auto press the steering wheel  
button  
(long press of the button)  
Before using Apple CarPlay, enable Siri  
from "Settings" > "General" > "Siri" on  
the smartphone.  
or the "Microphone" graphic button  
on the display in Android Auto (where  
provided).  
Android Auto APP Setup  
Voice Commands  
Before use, download the Android Auto  
application to your smartphone from  
Google Play Store.  
Voice commands are available using  
the voice assistant of the phone or  
Apple CarPlay or Android Auto.  
NOTE Voice commands are not  
available for languages not supported  
by the system.  
The application is compatible with  
Android 5.0 (Lollipop) and later  
versions. Starting from Android version  
10 and higher, the Android Auto app is  
integrated into the operating system of  
the smartphone and no downloading is  
required.  
WARNING The use of multiple wireless  
functions on the smartphone at the  
same time (Apple CarPlay/Android  
Auto and wireless charging), as  
To use the voice commands, press  
the “Voice”  
button on the steering  
indicated by the smartphone  
wheel controls and say the function you  
want to activate aloud. Alternatively,  
the function can be activated by saying  
"Hey FIAT" or "Hey Uconnect" (if the  
function is provided and if the user has  
previously enabled it).  
manufacturers, could cause it to  
overheat, resulting in a limitation of the  
active functions or its turning off. In this  
case, it is recommended to connect  
the system using the USB socket.  
On the first connection, you will have  
to perform the setup procedure that  
appears on the smartphone. You can  
only perform this procedure with the  
car stationary.  
Once connected to the USB port, the  
Android Auto application establishes a  
parallel Bluetooth® connection.  
Exiting the Android Auto and Apple  
CarPlay apps  
Interaction  
After the setup procedure, the  
application will run automatically on  
the Uconnect™ system when your  
To end the Apple CarPlay or Android  
Auto session, physically disconnect  
the smartphone from the USB port of  
262  
the car or using the "Device Manager"  
menu.  
press the star on the App icon to add it  
to your favourite app list.  
briefly and swipe your finger rightwards  
or leftwards.  
Pages can be deleted using the "Delete  
page" function or reordered using the  
"Reorder pages" function.  
APP  
Categories  
Pressing the graphic button "App"  
will display the "Favourites", "Recent",  
"Categories" and "All" submenus.  
The "Categories" submenu contains  
a list of filtered categories from the  
various apps. The following are  
displayed in order: Media, Nav,  
Telephone, Vehicle, System and more.  
The applications in each category are  
displayed in alphabetical order.  
NOTE The customisation is only active  
when the car is stationary. If an attempt  
is made to customise with the car in  
motion or to resume driving without  
having completed the procedure,  
a warning message will appear on  
the display and the operation will be  
ended.  
Favourites  
The "Favourites" submenu contains  
(for versions/markets, where provided)  
the "Electrical functions" and  
All  
"Performance" pages.  
The "All" category contains all available  
apps and allows the user to search for  
them in alphabetical order from A to Z  
or Z to A.  
The "Favourites" page can contain up  
to 6 favourite pages. A message will  
indicate that you have reached the  
maximum number of pages allowed if  
you try to add an additional page.  
To add or remove an app from the  
Favourites list, select or deselect the  
star that appears on the app icon in the  
list shown in the "Recent", "Categories"  
or "All" pages. A pop-up will tell you  
whether you want to save the app in  
your favourites or not. The operation  
can be cancelled by selecting "Cancel"  
or "X".  
MOVING THE WIDGETS  
Select the desired widget and then:  
WIDGETS  
On the main page, you can view  
summary pages of Uconnect™  
system functions (called "widgets")  
from a list of available widgets. To add  
Moving the widget: hold the desired  
widget pressed for a few seconds and  
then move it to the right or left of the  
display.  
a Widget, press the button  
display and select the desired Widget  
from the list.  
on the  
Some Widgets can also be customised  
next to the  
by pressing the button  
title. This will open the customisation  
screen.  
Recent  
The "Recent" submenu contains  
recently used or downloaded apps.  
The user will see a list of apps arranged  
in chronological order.  
The number of Widgets which can be  
installed per page depends on their  
size. You can add multiple pages (up to  
a maximum of five in total) by pressing  
the "+" button on the display. To switch  
between pages, simply touch the page  
Resizing the widget: press the  
widget resize icon to be resized.  
In the "Recent", "Categories" and "All"  
submenus, a message prompts you to  
263  
versions/markets where provided:  
Media, App, etc.  
OFFICIAL TYPE  
APPROVALS  
RADIO DEVICES  
View widget content: select the  
desired widget and then scroll  
vertically. When reordering the widgets  
(viewing their thumbnails), it will not be  
possible to view their contents.  
All radio equipment provided with  
the car complies with Directive  
2014/53/EU, UA.RED.TR, the French  
SAR Decree Law of 15/11/2019 and  
the UKCA (UK Conformity Assessed)  
Certification in force in the United  
Kingdom. For more information go  
to  
 
PROFILES  
By entering the Profiles environment  
you can create an avatar and enter  
your own customisations.  
Selecting "All profiles" displays all  
existing profiles. Up to 5 different  
profiles can be saved. Profiles can  
be deleted in bulk using the "Delete  
personal data" function in the  
"Settings" menu.  
RADIO FREQUENCY  
DEVICES  
All radio frequency devices comply with  
the regulations in force in the countries  
in which they are sold.  
To create your profile select "Create  
profile" and type in the name of your  
choice, choose one of the available  
avatars and store the car seat you  
normally occupy.  
For more information go to  
 
 
You can exclude all profiles and keep  
the default settings by pressing on the  
"Valet" mode, using the button on the  
"All profiles" page.  
Shortcuts (which can only be added  
with the car stationary) enable quick  
access to system contents, for  
264  

Related Topics

TIPS, CONTROLS AND GENERAL INFO
Uconnect 5
Uconnect 7 HD
Uconnect (Integrated System)
OFFICIAL TYPE APPROVALS

Popular Owner Manuals

Audi
BMW
Citroen
Ford
Honda
Peugeot

Latest Owner Manuals

Fourth Generation (2021-2026) Skoda Fabia 4 Door Fourth Generation (2021-2026) Skoda Fabia 4 Door
Second Generation (2013-2019) Hyundai I10 4 Door Second Generation (2013-2019) Hyundai I10 4 Door
First Generation (2007-2012) Hyundai I10 4 Door First Generation (2007-2012) Hyundai I10 4 Door
Second Generation (2022-2026) Volvo XC40 SUV Second Generation (2022-2026) Volvo XC40 SUV
Fifth Generation (2023-2026) Toyota Prius 4 Door Fifth Generation (2023-2026) Toyota Prius 4 Door
Fourth Generation (2016-2022) Toyota Prius 4 Door Fourth Generation (2016-2022) Toyota Prius 4 Door
→