Get TECHNICAL SPECIFICATIONS Guide for Fiat Tipo 4 Door Second Generation (2015-2026)

TECHNICAL SPECIFICATIONS

Everything you may find useful for

IDENTIFICATION DATA ............... 208

ENGINE .................................... 209

WHEELS................................... 211

DIMENSIONS ............................ 215

WEIGHTS ................................. 216

REFUELLING............................. 218

FLUIDS AND LUBRICANTS ......... 220

PERFORMANCE........................ 223

understanding how your car is made

and works is contained in this chapter

and illustrated with data, tables and

graphics. For the enthusiasts and the

technician, but also just for those who

want to know every detail of their car.

FUEL CONSUMPTION - CO

2

EMISSIONS............................... 224

PRESCRIPTIONS FOR

HANDLING THE CAR AT THE

END OF ITS LIFE........................ 225

207

D Technically allowed max. weight with

full load

This number is also stamped on the

passenger compartment floor, in front

of the front right seat.

IDENTIFICATION

DATA

E Technically allowed max. weight for

combined car

VEHICLE

IDENTIFICATION

NUMBER (VIN) PLATE

It is located on the driver side door

pillar. It can be read with the door open

and bears the following data fig. 227:

To access it, slide flap (1) fig. 229 in the

direction shown by the arrow.

F Technically allowed max. weight on

axle 1

G Technically allowed max. weight on

axle 2

H Engine identification

I Type variant version

L Paintwork colour code

M Smoke absorption coefficient (diesel

versions)

N Additional indications.

229

P2000047-000-000

VEHICLE

IDENTIFICATION

NUMBER

The marking includes:

car type;

chassis serial number.

The Vehicle Identification Number

(VIN) is stamped on the plate shown in

fig. 228, located on the front left corner

of the dashboard cover, which can be

seen from outside the vehicle, through

the windscreen.

MOTOR MARKING

It is stamped on the cylinder block and

includes the type and the engine serial

number.

227

04066J0011EM

A Name of Manufacturer

B Car type-approval number

C Car identification number

228

10016J0001EM

208

ENGINE

199)

ꢀ

Versions

1.4 16V 95 HP E6.4

1.6 130 HP E6.4

Engine code

Cycle

843A1000

46346020

Otto

Diesel

Number and position of cylinders

Piston bore and stroke (mm)

Total displacement (cm³)

Compression ratio

4 cylinders in line

72 x 84

79.5 x 80.5

1598

15.7: 1

96

1368

11±0.2:1

Maximum power (CEE) (kW)

Maximum power (CEE) (HP)

corresponding engine speed (rpm)

Maximum torque (CEE) (Nm)

corresponding engine speed (rpm)

Spark plugs

70

95

130

6000

127

3750

320

4500

1500

–

NGK DCPR7E-N-10

Unleaded petrol 95 R.O.N. (EN228

specifications)

Diesel for motor vehicles (EN590

Specification)

Fuel

209

IMPORTANT

199) Modifications or repairs to the fuel supply system that are not carried out properly or do not take the system’s technical specifications

into account can cause malfunctions leading to the risk of fire.

210

215 Nominal width (S, distance in mm

between sides)

WHEELS

Load rating (capacity)

63 = 272 kg

RIMS AND WHEELS

Alloy or pressed steel rims. Tubeless

radial carcass tires.

79 = 437 kg

80 = 450 kg

81 = 462 kg

82 = 475 kg

83 = 487 kg

84 = 500 kg

85 = 515 kg

86 = 530 kg

87 = 545 kg

88 = 560 kg

89 = 580 kg

90 = 600 kg

91 = 615 kg

55 Height/width ratio (H/S), expressed

as a percentage

64 = 280 kg

65 = 290 kg

66 = 300 kg

67 = 307 kg

68 = 315 kg

69 = 325 kg

70 = 335 kg

71 = 345 kg

72 = 355 kg

73 = 365 kg

74 = 375 kg

75 = 387 kg

R Radial tyre

All approved tires are listed in the

Registration Certificate.

17 Rim diameter in inches (Ø)

94 Load rating (capacity)

V Maximum speed rating

WARNING If there are any

Maximum speed index

Q up to 160 km/h

R up to 170 km/h

S up to 180 km/h

T up to 190 km/h

U up to 200 km/h

H up to 210 km/h

V up to 240 km/h

W up to 270 km/h

Y up to 300 km/h

discrepancies between the Owner

Handbook and the Registration

Document, take the information from

the latter. For safe driving, the car must

be fitted with tyres of the same make

and type on all wheels.

WARNING Do not use air chambers

with tubeless tyres.

CORRECT READING OF

THE TYRE

Example fig. 230: 215/55 R17 94V

Maximum speed index for snow

tyres

QM + S up to 160 km/h

TM + S up to 190 km/h

CORRECT READING OF

THE RIM CODE

^Hꢀ^{M + S up to 210 km/h}

Load rating (capacity)

Example fig. 230: 7J x 17 H2 ET40

7 width of the rim in inches (1).

J rim drop centre outline (side

projection where the tyre bead rests)

(2).

60 = 250 kg

61 = 257 kg

62 = 265 kg

76 = 400 kg

77 = 412 kg

78 = 425 kg

17 fitting diameter in inches

(corresponds to the diameter of the tyre

to be fitted) ((3) = Ø).

230

P2000058-000-000

211

H2shape and number of "humps"

(circumference measurement which

keeps the bead of tubeless tyres in

position on the rim).

ET40: wheel compensation (distance

between the disc/rim supporting plane

and the wheel rim centre line).

SNOW TYRES

200)

231

F1B0054C

Use snow tyres of the same size as the

standard tyres provided with the car.

The winter features of these tyres are

reduced considerably when the tread

depth is below 4 mm. Replace them in

this case.

IMPORTANT

200) The top speed for snow tyres marked

"Q” is 160 km/h, while it is 190 km/h for

"T” tyres and 210 km/h for "H" tyres.

Nevertheless, you must always comply

with the highway code speed limits.

201) DO NOT fit wheel hub caps when

using integral hub caps fixed (with

Their usage should therefore be

restricted in accordance with their

type-approval; always comply with

specific local regulations relating to the

use of snow tyres.

springs) to the steel rim and after sale

tyres provided with Rim Protector. Use

of unsuitable tyres and wheel caps may

cause sudden decrease of tyre pressure.

All four tyres should be the same

(brand and track) to ensure greater

safety when driving and braking as well

as a good manoeuvrability. Remember

that you should not change the rotation

direction of the tyres.

RIM PROTECTOR TYRES

201)

For wheel hub caps fitting on rims with

Rim Protector tyres, see the warning

below.

212

RIMS AND TYRES PROVIDED

202)

ꢀ

Versions

Rims

Tyres provided

215/60 R16 95V (*)

215/55 R17 94V (**)

215/55 R17 98W XL (***)

Spare wheel

6.5J X 16 H2 ET39

7J X 17 H2 ET41

205/55 R16 91V

205/55 R16 94V

1.4 16V 95 HP E6.4

1.6 130 HP E6.4 DDCT

(*) For versions/markets, where provided. The size is certified and allowed only for BRIDGESTONE TURANZA T005 tyres.

(**) For versions/markets, where provided. The size is certified and allowed only for BRIDGESTONE TURANZA T005 and FALKEN AZENIS

FK510 A tyres.

(***) For versions/markets, where provided. The size is certified and allowed only for GOODYEAR VECTOR 4SEASONS GEN-3 tyres.

NOTE On versions with 215/55 R17 and 215/60 R16 tyres, use smaller snow chains with a maximum projection of 7 mm

beyond the tyre profile.

NOTE Snow chains cannot be mounted on versions with DDCT and 215/55 R17 tyres.

IMPORTANT

202) If winter tyres with a lower speed rating than that indicated in the Registration Document are used, do not exceed the maximum speed

corresponding to the speed rating of the tyres used.

213

COLD TYRE INFLATION PRESSURE (bar)

When the tyres are warm, the inflation pressure should be + 0.3 bar in relation to the recommended figure. With snow tires, add

+0.2 bar to the pressure value prescribed for standard tires. However, recheck the correct value when the tyre is cold.

If it is necessary to raise the vehicle, refer to the "Raising the vehicle" paragraph in the "In an emergency" chapter.

TIPO CROSS version

Unladen/medium load

Full load

Versions

Tyres

Spare wheel

Front

2.2

Rear

2.1

Front

2.6

Rear

2.5

215/60 R16 95V (**)

215/55 R17 94V (***)

(*)

2.2

2.1

2.6

2.5

1.4 16V 95 HP E6.4

215/55 R17 98W XL

(****)

2.2

2.1

2.6

2.5

215/60 R16 95V (**)

215/55 R17 94V (***)

2.4

2.1

2.6

2.5

(*)

1.6 130 HP E6.4 DDCT

215/55 R17 98W XL

(****)

2.4

2.1

2.6

2.5

(*) If the spare wheel is used in an emergency, check pressure and, if necessary, align it to the values prescribed for the tyre of the axle where

it is used.

(**) The size is certified and allowed only for BRIDGESTONE TURANZA T005 tyres.

(***) The size is certified and allowed only for BRIDGESTONE TURANZA T005 and FALKEN AZENIS FK510 A tyres.

(****) The size is certified and allowed only for GOODYEAR VECTOR 4SEASONS GEN-3 tyres.

214

DIMENSIONS

TIPO CROSS version

Dimensions are expressed in mm and refer to the car equipped with its original tyres. Height is measured with car unladen.

Small variations with respect to the reported values are possible depending on the dimensions of the rims.

232

P2000266

ꢀ

A

B

C

D

E

F

G

H

I

1556 / 1653

(*)

1802 (front) /

1792 (rear)

894

2638

854

4386

1542

1543

2002

(*) with roof rack bars.

Boot volume: 440 litres.

215

WEIGHTS

ꢀ

Weights (kg)

1.4 16V 95 HP E6.4

1.6 130 HP E6.4

Unladen weight (with all

liquids, fuel tank filled to

90% and without optional

equipment)

1225

1380 (*****)

Payload including the driver

(*)

500

480 (*****)

Maximum permitted loads

(**)

–

– front axle

– rear axle

– total

1050

900

1050

900

1725

1860

Maximum combined car

load (car+trailer) (***)

2925

3060

Towable loads

–

– braked trailer

1500

500

1500

500

– trailer without brakes

Maximum load on tow hitch

(braked trailer)

60

216

Weights (kg)

1.4 16V 95 HP E6.4

1.6 130 HP E6.4

Maximum load on roof (****)

55

(*) If special equipment is fitted, the unladen weight increases, thus reducing the specified payload within the maximum permitted loads.

(**) Loads not to be exceeded. The user should carry goods in the boot and/on load carrying platform within the maximum permitted loads.

(***) Never exceed the maximum combined car load value: the maximum towable load is only allowed if it does not exceed the maximum

combined CAR load.

(****) The value shown includes the weight of the roof rack bars.

(*****) Versions equipped with dual clutch automatic transmission.

217

REFUELLING

ꢀ

1.4 16V 95 HP E6.4

Prescribed fuels and original lubricants

Fuel tank (litres)

50

7

Unleaded petrol with at least 95 R.O.N. (EN228

specifications) (*)

including a reserve of (litres)

Engine cooling system (litres)

Engine sump (litres)

UP

5

2.8

50% mixture of distilled water and PARAFLU

(**)

SELENIA K.P.E

Engine sump and filter (litres)

Gearbox casing/differential (litres)

Hydraulic brake circuit

2.95

1.76

0.7 (kg)

TUTELA TRANSMISSION GEARFORCE

TUTELA TOP 4/S

Windscreen washer fluid reservoir

(litres)

Mixture of water and liquid PETRONAS DURANCE

SC 35

3

(*) The maximum engine power and the car’s performance can only be guaranteed with lead-free petrol with an RON of 95 or higher.

UP

(**) In particularly harsh weather conditions, we recommend using a 60% mixture of PARAFLU

and 40% demineralised water.

218

ꢀ

1.6 130 HP E6.4

Prescribed fuels and original lubricants

Diesel for motor vehicles (EN590 Specification)

UP

Fuel tank (litres)

50

7

including a reserve of (litres)

Engine cooling system (litres)

Engine sump (litres)

6.1

4.4

4.8

50% mixture of distilled water and PARAFLU

(*)

SELENIA WR FORWARD

Engine sump and filter (litres)

TUTELA TRANSMISSION GEARFORCE / TUTELA

CS SPEED (1.6 130 HP versions with dual clutch

automatic transmission)

Gearbox casing/differential (litres)

Hydraulic brake circuit (kg)

1.8

0.7

3

TUTELA TOP 4/S

Windscreen washer fluid reservoir

(litres)

Mixture of water and liquid PETRONAS DURANCE SC

35

®

UREA tank (for versions/markets,

where provided) approximate capacity

(litres)

AdBlue (water-UREA solution) standard DIN 70 070

and ISO 22241-1

85) 86)

12.5

UP

(*) When the car is used in particularly harsh weather conditions, we recommend using a 60% mixture of PARAFLU

water.

and 40% demineralised

WARNING

85) The distribution companies are responsible for the compliance of their product. Observe the precautions of storage and servicing, in order

to preserve the initial qualities. The manufacturer will not recognise any guarantee in case of malfunctions and damage caused to the car due

®

to the use of AdBlue (UREA) not in accordance with regulations.

86) Use AdBlue® only according to DIN 70 070 and ISO 22241-1. Other fluids may cause damage to the system: also exhaust emissions

would no longer comply with the law.

219

FLUIDS AND LUBRICANTS

Your vehicle is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of

the Service Schedule. Constant use of the prescribed lubricants guarantees the fuel consumption and emission specifications.

Lubricant quality is crucial for engine operation and duration.

If lubricants conforming to the specific request are not available, products that meet the indicated specifications can be used to

top up; in this case optimal performance of the engine is not guaranteed.

87)

PRODUCT SPECIFICATIONS

Original liquids and

lubricants

Use

Features

Specification

Replacement frequency

Lubricant for petrol

engines 1.4 16V 95 HP

(for versions/markets

where provided)

SELENIA K P.E.

Contractual Technical

Reference

According to Service

Schedule

SAE 5W-40 ACEA C3

9.55535-S2

No. F603.C07

SELENIA WR

FORWARD

Contractual Technical

Reference

No. F013.K15

Lubricant for 1.6 Multijet

diesel engines with

AdBlue® (UREA)

According to Service

Schedule

SAE 0W-20 ACEA C5

9.55535-DSX

220

ꢀ

Original liquids and

lubricants

Use

Features

Specification

Applications

TUTELA

TRANSMISSION

GEARFORCE

Contractual Technical

Reference N° F002.F10

Synthetic lubricant SAE

75W grade

Manual gearbox and

differential

9.55550-MZ6

Lubricant for electro-

hydraulic actuator

(dual clutch automatic

transmission versions)

TUTELA CS SPEED

Contractual Technical

Reference N° F005.F98

Fully synthetic lubricant

with dedicated additive

9.55550-SA1

Lubricants and greases for

drive transmission

Low friction coefficient

grease for constant

velocity joints. N.L.G.I.

consistency 0-1

TUTELA STAR 700

Contractual Technical

Reference N° F701.C07

Differential side constant

velocity joints

9.55580 – GRASS II

9.55580-GRAS II

Molybdenum disulphide

grease, for use at high

temperatures. N.L.G.I.

consistency 1-2

TUTELA ALL STAR

Contractual Technical

Reference N° F702.G07

Wheel side constant

velocity joints

Synthetic fluid for brake

and clutch systems.

Exceeds specifications:

FMVSS n° 116 DOT 4,

ISO 4925 SAE J1704

TUTELA TOP 4/S

Contractual Technical

Reference N° F005.F15

Hydraulic brakes and

hydraulic clutch controls

Brake fluid

9.55597 or MS.90039

9.55523 or MS.90032

Protective agent with

antifreeze action with

organic formulation.

CUNA NC 956-16, ASTM

D 3306 specifications.

Cooling circuits

proportions of use: 50%

UP

PARAFLU

Contractual Technical

(*)

Protective agent for

radiators

UP

water 50% PARAFLU

(**)

Reference N° F101.M01

221

Original liquids and

lubricants

Use

Features

Specification

Applications

PETRONAS DURANCE

DIESEL ART

Contractual Technical

Reference N° F601.C06

Antifreeze additive for

diesel fuel, with protective

action for diesel engines

To mix with diesel (25 cc

per 10 litres)

Diesel fuel additive

–

Mixture of spirits and

surfactants. Exceeds

CUNA NC 956-11

specifications

PETRONAS DURANCE

SC 35

Contractual Technical

Reference N° F001.D16

To be used diluted or

undiluted in screen

washer/wiper systems

Windscreen washer fluid

9.55522 or MS.90043

To be used for filling the

®

AdBlue tank on versions

Additive for diesel

emissions (UREA) (***)

DIN 70 070 and ISO

22241-1

®

Water-UREA solution

AdBlue

equipped with Selective

Catalytic Reduction (SCR)

system

(*) Do not top up or mix with other fluids which have different specifications from the ones described.

UP

(**) In particularly harsh weather conditions, we recommend using a 60% mixture of PARAFLU

®

and 40% demineralised water.

(***) AdBlue is a registered trademark of Verband der Automobilindustrie e.V. (VDA)

WARNING

87) The use of products with specifications other than those indicated above could cause damage to the engine not covered by the warranty.

222

PERFORMANCE

^Tꢀ^{op speeds after the initial period of usage of the vehicle.}

Versions

km/h

177

1.4 16V 95 HP

1.6 130 HP

200

223

FUEL CONSUMPTION - CO EMISSIONS

2

The fuel consumption and CO emission figures declared by the manufacturer are determined on the basis of the type-approval

2

tests laid down by the applicable standards in the country where the car is registered.

The type of route, traffic conditions, weather conditions, driving style, general condition of the car,

version/equipment/accessories, use of the climate control system, car load, presence of roof racks and other situations that

adversely affect the aerodynamics or wind resistance lead to different fuel consumption values than those measured. The fuel

consumption will only become more regular after driving the first 3000 km.

To find the specific fuel consumption and CO emission figures for this car, please refer to the data in the Certificate of

2

Conformity, and the related documentation that accompanies the car.

224

PRESCRIPTIONS FOR HANDLING THE CAR AT THE END OF ITS

LIFE

(for versions/markets, where provided)

The Manufacturer has been committed for many years to safeguarding the Environment through the constant improvement of

its production processes and manufacturing products that are increasingly "eco-compatible". To grant customers the best

possible service in terms of respecting environmental laws and in response to European Directive 2000/53/EC governing

vehicles at the end of their life, the Manufacturer is offering its customers the chance to hand over their car at the end of its life

without incurring any additional costs. The European Directive specifies that when the car is handed over, the last keeper or

owner should not incur any expenses as a result of it having a zero or negative market value.

To hand your car over at the end of its life without extra cost, contact one of our dealerships if you are purchasing another car,

or a collection and scrapping centre authorised by the Manufacturer. These centres have been carefully chosen to offer high

quality service for the collection, treatment and recycling of vehicles at their end of life, respecting the surrounding environment.

You can find further information on these collection and scrapping centres either from a Stellantis dealership or by calling the

number in the Warranty Booklet or by consulting the websites of the various manufacturer brands.

225

TECHNICAL SPECIFICATIONS for Your Fiat Tipo 4 Door Second Generation (2015-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals