Get Audio System -> AUDIO UNIT Guide for Ford Ecosport SUV First Generation (2004-2012)

Audio System

network may be broken down into a

AUDIO UNIT

number of smaller regional networks,

typically centered on major towns or cities.

When not split into these smaller variants,

the whole network carries the same

programming.

WARNINGS

Radio sound levels can go above

85dB and listening to sounds above

85 decibels can harm the human

auditory system. Law 11.291/2006.

Regional mode ON: This prevents random

alternative frequency switches when

neighboring regional networks are not

carrying the same programming.

Regional mode OFF: This allows a larger

coverage area if neighboring regional

networks carry the same programming,

but it can cause random alternative

frequency switches if they are not.

Driving while distracted can result in

loss of vehicle control, crash and

injury. We strongly recommend that

you use extreme caution when using any

device that may take your focus off the

road. Your primary responsibility is the safe

operation of your vehicle. We recommend

against the use of any hand-held device

while driving and encourage the use of

voice-operated systems when possible.

Make sure you are aware of all applicable

local laws that may affect the use of

electronic devices while driving.

1. Press MENU.

2. Select AUDIO or AUDIO SETTINGS.

3. Scroll to RDS REGIONAL and turn on

or off by pressing OK.

4. Press MENU to return.

154

Ecosport (CBW) India

Audio System

C

A

B

D

E

F

T

S

G

R

Q

H

P

L

O

N

M

K

J

I

E130142

A

B

C

D

E

F

Ejects a CD.

Arrow keys let you navigate through the options displayed on the display.

Opening access for CD.

OK confirms the selections shown on the display.

INFO let you access information from CD, USB and iPod.

TA allows you to turn traffic announcements on or off and cancels

announcements during an active announcement.

G

H

SOUND lets you adjust the sound settings for Treble, Mid, Low, Fade, Balance,

Equalizer Settings and DSP.

Number block can store your favorite radio stations. When turned to a station,

press and hold the button until the station is memorized. Press to go to a station

previously stored. In CD mode, press a number to select a track. In phone mode,

use the buttons to dial a phone number.

155

Ecosport (CBW) India

Audio System

I

J

Function button allows you to select four different functions of the audio system

depending on the mode (i.e. radio, CD, AUX, USB, iPod, phone or Bluetooth)

where you are.

Function button allows you to select three different functions of the audio

system depending on the mode (i.e. radio, CD, AUX, USB, iPod, phone or

Bluetooth) where you are.

K

Seek allows you to go to the next station up the radio frequency band, or to the

next track on a CD, USB, iPod and Bluetooth audio (if your device supports

Bluetooth).

L

ON/OFF and Volume allows you to turn on or off the audio system by pressing

the button. Turn the knob to adjust the volume.

M

Seek allows you to go to the next station down the radio frequency band or the

previous track on a CD, USB, iPod and Bluetooth audio (if your device supports

Bluetooth).

N

O

Function button allows you to select two different functions of the audio system

depending on the mode (i.e. radio, CD, AUX, USB, iPod, phone or Bluetooth)

where you are.

Function button allows you to select different functions of the audio system

depending on which mode (i.e. radio, CD, AUX, USB, iPod, phone or Bluetooth)

where you are.

P

MENU allows you to access different audio system features.

Q

PHONE allows you to access the phone features of the SYNC system. See

separate manual.

R

S

T

AUX allows you to access the AUX, USB, iPod, Bluetooth Audio, SYNC and also

cancels the scrolling menu or list. See separate manual.

RADIO lets you select different radio bands and will also cancel the scrolling

menu or list.

Change source to CD, will also cancel menu or list browsing.

4. Press the OK button to confirm the new

Sound Button

settings.

This will allow you to adjust the sound

settings (for example bass, middle and

treble).

Frequency Band Button

Press RADIO to select one of the frequency

bands available: AM, AM AST, FM, FM AST.

1. Press the sound button.

You can use the selector to return to radio

reception when you have been listening to

another source.

2. Use the up and down arrow buttons to

select the required setting.

3. Use the left and right arrow buttons to

make the necessary adjustment. The

display indicates the level selected.

156

Ecosport (CBW) India

Audio System

Alternatively, press the left arrow button

3. Press and hold one of the preset

buttons. A progress bar and message

will appear. When the progress bar

completes the station has been stored.

The audio unit will also mute

to display the available frequency bands.

Scroll to the required frequency band and

press OK.

Station Tuning Control

Seek Tuning

Select a frequency band and briefly press

one of the seek buttons. The unit will stop

at the first station it finds in the direction

you have chosen.

momentarily as confirmation.

You can repeat this on each frequency

band and for each preset button.

Note: When you drive to another part of the

country, stations that broadcast on

alternative frequencies, and are stored on

preset buttons, may be updated with the

correct frequency and station name for that

area.

Manual Tuning

1. Press function button 2.

2. Use the left and right arrow buttons to

tune down or up the frequency band in

small increments or press and hold to

increment quickly, until you find a

station you want to listen to.

Autostore Control

Note: Stores the 10 strongest signals

available in the frequency band AM AST or

FM AST, and overwrites the previously

stored stations. You can also manual store

a station in the same manner as other

frequency bands.

3. Press OK to continue listening to a

station.

•

Press and hold the function button 1. A

progress bar and a message will be

displayed.

When the search is complete, sound is

restored and the strongest signals are

stored on the autostore presets.

Scan Tuning

Scan allows you to listen to a few seconds

of each station detected.

•

1. To activate, press the function button

3.

2. Use the seek buttons to scan up or

Traffic Information Control (If

down the frequency band.

Equipped)

3. To deactivate, press the function

button 3 again or OK to continue

listening to a station.

To receive alerts about traffic, you must

press the TA button. A TA symbol is

displayed to show that the feature was

activated.

Station Preset Buttons

This feature allows you to store your

favorite stations, they can be recalled by

selecting the appropriate frequency band

and pressing one of the preset buttons.

1. Select a frequency band.

2. Tune to the station required.

TurningTrafficAnnouncementsOnand

Off

Before you can receive traffic

announcements, you must press either the

TA button. A TA display will appear to

show the feature is switched on.

157

Ecosport (CBW) India

Audio System

If you are already tuned to a station that

Automatic Volume Control

When available, automatic volume control

adjusts the volume level to compensate

for engine noise and road speed noise.

broadcasts traffic information, TP will also

be displayed. Otherwise the unit will search

for a traffic program.

When traffic information is broadcast, it

will automatically interrupt normal radio

or CD playback and Traffic announcement

will appear in the display.

1. Press the MENU button and AUDIO

SETTINGS.

2. Select VOL. ADJUSTABLE.

If a non-traffic station is selected or

recalled using a preset button, the audio

unit will remain on that station unless TA

is turned off, then on again.

Note: If traffic announcement is on and you

select a preset or manual tune to a non

traffic announcement station no traffic

announcement will be heard.

Note: When you are listening to a non

traffic announcement station and turn

traffic announcement off and on again a TP

seek will occur.

3. Use the arrow button, left or right, to

adjust the setting.

4. Press the OK button to confirm your

selection.

5. Press the MENU button to return.

News Broadcasts

Your audio unit may interrupt normal

reception to broadcast news bulletins from

stations on the FM frequency band, radio

data system or other enhanced network

linked stations.

Traffic Announcement Volume

The display will indicate there is an

incoming announcement, during news

broadcasts. When the audio unit interrupts

for a news broadcast the preset volume

level will be the same as traffic

announcements.

1. Press the MENU button.

2. Select AUDIO SETTINGS.

Traffic announcements interrupt normal

broadcasts at a preset minimum level that

is usually louder than normal listening

volumes.

To adjust the preset volume:

•

Use the volume control to make the

necessary adjustment during an

incoming traffic announcement

broadcast. The display will show the

level selected.

3. Scroll to NEWS and turn on or off with

the OK button.

4. Press the MENU button to return.

End of Transit Notification

Alternative Frequencies

The audio unit will return to normal

operation at the end of each traffic

announcement. To end the announcement

prematurely, press TA during the

announcement.

The majority of programs that broadcast

on the FM frequency band have a program

identification code, it can be recognized by

audio units.

When your vehicle moves from one

transmission area to another with the

alternative frequencies tuning switched

on, this function will search for the

strongest station signal.

Note: If you press TA at any other time it

will switch all announcements off.

158

Ecosport (CBW) India

Audio System -> AUDIO UNIT for Your Ford Ecosport SUV First Generation (2004-2012)

Related Topics

Popular Owner Manuals

Latest Owner Manuals