Get Information Displays Guide for Ford Ecosport SUV First Generation (2004-2012)

Information Displays

Press the MENU button on the radio to

GENERAL INFORMATION

access some configurable features. Use

the control arrow to the following features:

WARNING

•

SYNC-config; access general SYNC

configurations. See separate SYNC

manual.

SYNC-applications; access SYNC

applications (if equipped). See

separate SYNC manual.

Audio configuration; defines the audio

configurations. See Audio unit (page

154).

Driving while distracted can result in

loss of vehicle control, accident,

damages to the vehicle and injury to

passengers. Ford strongly recommends

that drivers use extreme caution when

using any device or feature that may direct

their focus elsewhere. Your primary

responsibility is the safe operation of the

vehicle. We recommend against the use

of any handheld device while driving and

that you comply with all applicable laws.

Vehicle configurations; allow you to

configure these features:

•

Traction control -- you can activate

or deactivate traction control. See

(page 49).

Various systems on your vehicle can be

controlled using the information display

controls on your audio unit (if equipped).

Corresponding information is displayed in

the information display (if equipped).

Lane change indicator -- you can

set the lane change indicator to

blink once or three times when

changing lanes while driving. See

Direction Indicators (page ?).

Information Display Controls(If

Equipped)

•

Chimes -- you can set if an audible

warning will be sound for some

information messages. See

InformationMessages (page 53).

•

Clock; allows you to adjust the time

and date.

Display; allows you to set the language

on the display and in the voice

recognition system.

E103626

•

System; allows you to see current

•

Press the up and down arrow buttons

to scroll through and highlight the

options within a menu.

active information messages.

Adjusting the Clock

1. Press the MENU button on the radio.

2. Select Clock then press OK.

3. Select Adjust Clock then press OK.

4. Use the up or down arrows to increase

•

Press the right arrow button to enter a

sub-menu.

Press the left arrow button to exit a

menu.

Press and hold the left arrow button at

any time to return to the main menu

display (escape button).

or decrease the hour and minutes.

5. Use the left or right arrows to alternate

between hour or minute adjustment.

•

Press the OK button to choose and

confirm settings or messages.

49

Ecosport (CBW) India

Information Displays

6. Press OK when done.

or

The symbol + is activated when

the value to be displayed is

E146281

higher than the maximum scale

1. Press the # symbol on the radio to

value. For applications that use km/l it

means low fuel consumption. For

applications that use l/100km it means

high fuel consumption.

access the clock adjustment.

2. Use the up or down arrows to increase

or decrease the hour and minutes.

3. Use the left or right arrows to alternate

between hour or minute adjustment.

4. Press OK when done.

TRIP COMPUTER (IF EQUIPPED)

STANDARD

Adjusting the Date

1. Press the MENU button on the radio.

2. Select Clock then press OK.

3. Select Adjust Date then press OK.

4. Use the up or down arrows to increase

or decrease the day, month and year.

5. Use the left or right arrows to alternate

between day, month and year

adjustment.

E146272

Press the button to scroll through the

displays:

6. Press OK when done.

•

total distance odometer

trip odometer

24 Hour Mode

1. Press the MENU button on the radio.

2. Select Clock then press OK.

3. Choose 24h Mode.

4. Check the selection box with the OK

button to enable 24h Mode or uncheck

to enable 12h mode.

Total Distance Odometer

Registers the total distance of

the vehicle.

E146273

Trip Odometer

Registers the distance traveled

INSTANTANEOUS FUEL

CONSUMPTION

of individual journeys.

E146274

When on this screen, press and hold the

trip button until the screen appears

completely full with dashes (from: current

mileage to: _ _ _ _ _ ) to reset this function.

E146280

Indicates the current fuel consumption.

50

Ecosport (CBW) India

Information Displays

Speed Alarm

TRIP COMPUTER OPTIONAL

To set the desired speed value

for the speed warning, select the

speed alarm screen.

E146278

The speed alarm can be set to work with

the following speeds: 30, 40, 50, 60, 70,

80, 90, 100, 110, 120, 130, 140 km/h.

The process to switch the speed alarm ON

E146272

when the system is switched OFF.

Press the button to scroll through the

displays:

From:

•

total distance odometer

trip odometer

average fuel economy

speed alarm

average speed

distance to empty

E148860

To:

outside ambient temperature (always

displayed)

You can reset the trip odometer, average

fuel economy and average speed. To do

this, scroll to the required display, then

press and hold the button until the screen

appears completely full with dashes.

E148859

The trip computer includes the following

1. Press the reset button with a long press

(for at least two seconds) until the

display of the speed alarm symbol and

the OFF indicator begins to blink. This

indicates that the screen is now in edit

mode.

information displays:

Total Distance Odometer

Registers the total distance of

the vehicle.

E146273

2. Release the button.

Trip Odometer

3. Press the button with short presses

(less than two seconds) several times

until the desired speed appears in the

display.

Registers the distance traveled

of individual journeys.

E146274

Average Fuel Consumption

Indicates the average fuel

consumption since the function

E146275

was last reset.

51

Ecosport (CBW) India

Information Displays

4. To save, wait five seconds on this

1. Press the reset button with a long press

(for at least two seconds) until the

display of the speed alarm symbol and

the speed unit begins to blink. This

indicates that the screen is now in edit

mode.

screen or press the button for at least

two seconds. You will hear a beep and

the display will stop blinking indicating

that your selection has been saved.

This step must be followed for all three

sections (OFF to ON, ON to OFF and

ON to ON) that describes the speed

alarm save process.

2. Release the button.

3. Press the button with a short press

(less than two seconds) once, the

display will change to OFF.

4. To save this speed, wait five seconds

on this screen or press the button after

at least two seconds. You will hear a

beep and the display will stop blinking

indicating that your selection has been

saved.

Note: The maximum selectable speed for

the alarm is 140 km/h. If you continue to

press the reset button with short presses

the display will go back to the OFF mode

and so the multiples of 10 speeds will be

displayed again.

Note: In set mode, the selectable speed

displayed after the OFF screen will always

be the next multiple of 10 in speed from the

speedometer (i.e. if your speedometer

indicates 63 km/h, the speed alarm will give

you option from 70 to 140 km/h. If

The process to set a new speed when the

speed alarm is active.

From:

speedometer indicates 100 km/h, the speed

alarm will give you options from 110 to 140

km/h. If speedometer indicates 30 km/h,

the options will be from 40 to 140 km/h).

The process to switch the speed alarm Off.

From:

E148859

To:

E148858

To:

E148858

1. Press the reset button with a long press

(for at least two seconds) until the

display of the speed alarm symbol and

the speed unit begins to blink. This

indicates that the screen is now in edit

mode.

E148860

2. Release the button.

52

Ecosport (CBW) India

Information Displays

3. Press the button with short presses

This will display the outside ambient

temperature in degrees Celsius.

(less than two seconds) several times

until the desired speed displays. The

first screen after the first short press

will be the OFF option. Continue with

short presses to see the next speed

alarm option.

INFORMATION MESSAGES

Note: Depending on the vehicle options

equipped with your vehicle, not all of the

messages will display or be available.

Certain messages may be abbreviated or

shortened depending upon which cluster

type you have.

4. To save this speed, wait five seconds

on this screen or press the button

during for at least two seconds. You

will hear a beep and the display will

stop blinking indicating that your

selection has been saved.

Average Speed

Indicates the average speed

calculated since the function

E146277

was last reset.

E103626

Distance to Empty

Press the OK button to acknowledge and

remove some messages from the

information display. Other messages will

be removed automatically after a short

time.

Indicates the approximate

distance the vehicle will travel

E146276

on the fuel remaining in the tank.

Change in driving pattern may cause the

value to vary.

Certain messages need to be confirmed

before you can access the menus.

Outside Ambient Temperature

Indication

The message indicator

illuminates to supplement some

messages. It will be red or amber

depending on the severity of the message

and will remain on until the cause of the

message has been rectified.

Some messages will be supplemented by

a system specific symbol with a message

indicator.

E148857

53

Ecosport (CBW) India

Information Displays

Airbag

Message

indicator

Message

Action

Have the system checked by a

authorized dealer as soon as

possible.

Airbag malfunction service now

amber

Diesel

Message

indicator

Message

Action

See Starting a Diesel Engine

Engine preheating

amber

(page 76).

Diesel filter overloaded Refer to

handbook

See Starting a Diesel Engine

(page 76).

Doors Open

Message

indicator

Action

Vehicle is moving. Stop your vehicle

as soon as safely possible and

close.

Driver door open

red

Vehicle is moving. Stop your vehicle

as soon as safely possible and

close.

Driver side rear door open

Passenger door open

Passenger side rear door open

Boot open

Vehicle is moving. Stop your vehicle

as soon as safely possible and

close.

Vehicle is moving. Stop your vehicle

as soon as safely possible and

close.

Vehicle is moving. Stop your vehicle

as soon as safely possible and

close.

Driver door open

amber

Vehicle not moving. Close.

Drivers side rear door open

54

Ecosport (CBW) India

Information Displays

Message

indicator

Message

Action

Passenger door open

Passenger side rear door open

Boot open

amber

Vehicle not moving. Close.

Engine Immobilizer

Message

indicator

Action

Have the system checked by a

authorized dealer as soon as

possible.

Immobilizer malfunction service

now

red

Keyless System

Message

indicator

Action

Key battery low replace battery

Turn ignition off use POWER button

Press brake to start

amber

See Remote Control (page 23).

See Keyless Starting (page 73).

amber

-

Press clutch to start

Lighting

Message

indicator

Action

Left indicator malfunction change

bulb

-

See Changing a Bulb (page 121).

Right indicator malfunction change

bulb

55

Ecosport (CBW) India

Information Displays

Maintenance

Message

indicator

Action

See Brake and Clutch Fluid Check

Brake fluid level low service now

red

(page 119).

Brake system malfunction stop

safely

Have the system checked by a

authorized dealer immediately.

red

Engine oil pressure low stop safely

See Engine Oil Check (page 117).

Have the system checked by a

authorized dealer as soon as

possible.

Engine malfunction service now

amber

Auto wiper/lights malfunction

service required

Have the system checked by a

authorized dealer.

amber

-

Engine oil change due service

required

Have the system checked by a

authorized dealer.

Steering

Message

indicator

Action

Steering lock malfunction stop

safely

Have the system checked by a

authorized dealer immediately.

red

Full steering will be maintained but

you will need to exert greater force

on the steering wheel. Have the

system checked by a authorized

dealer as soon as possible.

Power steering malfunction service

now

amber

56

Ecosport (CBW) India

Information Displays

Transmission

Message

indicator

Action

Transmission malfunction service

now

Have the system checked by a

authorized dealer immediately.

red

Under certain driving conditions it is

possible that the clutches in the

transmission can overheat. In these

circumstances it is necessary to

press the brake pedal and stop your

vehicle to prevent damage to the

transmission. Select N or P and

apply the parking brake until the

transmission has cooled and the

message disappears from the

display.

Transmission overtemperature stop

safely

See Automatic Transmission

(page 83). See Starting and

Stopping the Engine (page 73).

Vehicle not in park select P

-

See Automatic Transmission

(page 83). See Starting and

Stopping the Engine (page 73).

To start select N or P

Press brake to start

To start select N

-

See Starting and Stopping the

Engine (page 73).

See Automatic Transmission

(page 83). See Starting and

Stopping the Engine (page 73).

See Automatic Transmission

(page 83). See Starting and

Stopping the Engine (page 73).

Door open apply brake

Cranking time exceeded

-

See Starting a Gasoline Engine

(page 75).

Hill start assist active

Hill start assist off

See Hill Start Assist (page 85).

57

Ecosport (CBW) India

Information Displays

Stability Control

Message

indicator

Action

Have the system checked by a

authorized dealer as soon as

possible.

ABS malfunction service now

amber

Have the system checked by a

authorized dealer.

Reduced electronic stability control

Electronic stability control off

-

See Using Stability Control (page

90).

58

Ecosport (CBW) India

Information Displays for Your Ford Ecosport SUV First Generation (2004-2012)

Related Topics

Popular Owner Manuals

Latest Owner Manuals