2004-2012 Ford Ecosport SUV Starting and Stopping the Engine -> KEYLESS STARTING User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and Stopping the Engine -> KEYLESS STARTING for Your Ford Ecosport SUV First Generation (2004-2012)

Starting and Stopping the Engine  
GENERAL INFORMATION  
IGNITION SWITCH  
WARNINGS  
Extended idling at high engine  
speeds can produce very high  
temperatures in the engine and  
exhaust system, creating the risk of fire or  
other damage.  
Do not park, idle or drive your vehicle  
on dry grass or other dry ground  
E72128  
cover. The emission system heats up  
the engine compartment and exhaust  
system, creating the risk of fire.  
Do not start the engine in a closed  
garage or in other enclosed areas.  
Exhaust fumes can be toxic. Always  
open the garage door before you start the  
engine.  
0 (off) - The ignition is off.  
I (accessory) - Allows the electrical  
accessories to operate while the engine is  
not running.  
Note: Do not leave the ignition key in this  
position for too long to avoid your vehicle  
battery losing charge.  
If you smell exhaust fumes inside  
your vehicle, have it checked by a  
Ford Dealer immediately. Do not  
drive your vehicle if you smell exhaust  
fumes.  
II (on) - All the electrical circuits are  
operational. Warning lamps and indicators  
illuminate.  
III (start) - cranks the engine. Release the  
key as soon as the engine starts.  
If you disconnect the battery, your vehicle  
may exhibit some unusual driving  
KEYLESS STARTING  
characteristics for approximately 8  
kilometers after you reconnect it. This is  
because the engine management system  
must realign itself with the engine. You can  
disregard any unusual driving  
WARNING  
Always check that the steering wheel  
lock is deactivated before  
attempting to move your vehicle.  
Failure to deactivate the steering wheel  
lock could result in a crash.  
characteristics during this period.  
When you start the engine, avoid pressing  
the accelerator pedal before and during  
operation. Only use the accelerator pedal  
when you have difficulty starting the  
engine.  
Note: The system may not function if the  
remote control is close to metal objects or  
electronic devices such as cell phones.  
Note: The ignition will automatically switch  
off if your vehicle is left unattended. This is  
to prevent the vehicle battery from losing  
charge.  
Note: A valid passive key must be located  
inside your vehicle to switch the ignition on  
and start the engine.  
73  
Ecosport (CBW) India  
Starting and Stopping the Engine  
Diesel Engine  
Switching the Ignition On  
(Accessory Mode)  
Note: Engine cranking will not commence  
until the engine glow plug cycle has been  
completed. This may take several seconds  
in extremely cold conditions.  
Failure to Start  
The system does not function if:  
The passive key frequencies are  
jammed.  
The passive key battery has no charge.  
If you are unable to start your vehicle, do  
the following.  
E142318  
Press the button once without your foot  
on the brake or clutch pedal. It is located  
on the instrument panel near the steering  
wheel. All electrical circuits and  
accessories are operational and the  
warning lamps and indicators illuminate.  
Press the button again without your foot  
on the brake or clutch pedal to turn your  
vehicle off completely.  
E99666  
Starting Your Vehicle  
Manual Transmission  
1. Fully depress the clutch pedal.  
2. Briefly press the button.  
Note: Releasing the clutch pedal during  
engine start will stop the engine cranking  
and return to ignition on.  
1. Hold the passive key next to the  
symbol on the steering column.  
2. With the passive key in this position,  
you can use the button to switch the  
ignition on and start your vehicle.  
Manual Transmission  
If the engine does not crank when the  
clutch pedal has been fully depressed and  
the button is pressed:  
Automatic Transmission  
1. Move the transmission selector lever  
to park.  
1. Fully depress both the clutch and brake  
pedals.  
2. Fully depress the brake pedal.  
3. Briefly press the button.  
Note: Releasing the brake pedal during  
engine start will stop the engine cranking  
and return to ignition on.  
2. Press the button until the engine has  
started.  
Note: Releasing the clutch pedal during  
engine start will stop the engine cranking  
and return to ignition on. A message will be  
shown in the display.  
74  
Ecosport (CBW) India  

Related Topics

Popular Owner Manuals