2007-2014 Ford Edge SUV Driving -> AdvanceTrac? User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> AdvanceTrac? for Your Ford Edge SUV First Generation (2007-2014)

Press the parking brake pedal
downward again to release the
parking brake. Driving with the
parking brake on will cause the
brakes to wear out quickly and
reduce fuel economy.
Note: If the vehicle is driven with
the parking brake applied, a chime
will sound.
ADVANCETRAC姞 WITH ROLL STABILITY CONTROL™ (RSC姞)
STABILITY ENHANCEMENT SYSTEM
WARNING: Vehicle modifications involving braking system,
aftermarket roof racks, suspension, steering system, tire
construction and/or wheel/tire size may change the handling
characteristics of the vehicle and may adversely affect the performance
of the AdvanceTrac威 with RSC威 system. In addition, installing any
stereo loudspeakers may interfere with and adversely affect the
AdvanceTrac威 with RSC威 system. Install any aftermarket stereo
loudspeaker as far as possible from the front center console, the
tunnel, and the front seats in order to minimize the risk of interfering
with the AdvanceTrac威 with RSC威 sensors. Reducing the effectiveness
of the AdvanceTrac威 with RSC威 system could lead to an increased risk
of loss of vehicle control, vehicle rollover, personal injury and death.
WARNING: Remember that even advanced technology cannot
defy the laws of physics. It’s always possible to lose control of a
vehicle due to inappropriate driver input for the conditions. Aggressive
driving on any road condition can cause you to lose control of your
vehicle increasing the risk of personal injury or property damage.
Activation of the AdvanceTrac威 with RSC威 system is an indication that
at least some of the tires have exceeded their ability to grip the road;
this could reduce the operator’s ability to control the vehicle,
potentially resulting in a loss of vehicle control, vehicle rollover,
personal injury and death. If your AdvanceTrac威 with RSC威 system
activates, SLOW DOWN.
Driving
221
2010 Edge (edg)
Owners Guide, 3rd Printing
USA (fus)
WARNING: If a failure has been detected within the
AdvanceTrac威 with RSC威 system, the “sliding car” icon
will
illuminate steadily. Verify that the AdvanceTrac威 with RSC威 system is
not manually disabled (press the AdvanceTrac威 with RSC威 “Off “
button located on the center of the instrument panel). If the “sliding
car” icon
still illuminates steadily, have the system serviced by an
authorized dealer immediately. Operating your vehicle with
AdvanceTrac威 with RSC威 disabled could lead to an increased risk of
loss of vehicle control, vehicle rollover, personal injury and death.
The AdvanceTrac威 with RSC威 system provides the following stability
enhancement features for certain driving situations:
• Traction Control System (TCS), which functions to help avoid
drive-wheel spin and loss of traction.
• Electronic Stability Control (ESC), which functions to help avoid skids
or lateral slides
• Roll Stability Control™ (RSC威), which functions to help avoid a
vehicle roll-over.
The AdvanceTrac威 with RSC威 system automatically enables each time
the engine is started. All features of the AdvanceTrac威 with RSC威 system
(TCS, ESC, and RSC威 are active and monitor the vehicle from start-up).
However, the system will only intervene if the driving situation requires
it.
The AdvanceTrac威 with RSC威
system includes an AdvanceTrac威
with RSC威 “Off” button on the
center of the instrument panel, and
a “sliding car” icon
in the
instrument cluster. The “sliding car”
icon
in the instrument cluster will illuminate temporarily during
start-up as part of a normal system self-check, or during driving if a
driving situation causes the AdvanceTrac威 with RSC威 system to operate.
If the “sliding car” icon
illuminates steadily, verify that the
AdvanceTrac威 with RSC威 system is not manually disabled by pressing
the AdvanceTrac威 with RSC威 “Off” button located on the center of the
instrument panel. If the “sliding car” icon
remains steadily
illuminated, have the system serviced by an authorized dealer
immediately. The message center will also indicate a failure with the
AdvanceTrac威 with RSC威 system.
Driving
222
2010 Edge (edg)
Owners Guide, 3rd Printing
USA (fus)
When AdvanceTrac威 with RSC威 performs a normal system self-check,
some drivers may notice a slight movement of the brake, and/or a
rumble, grunting, or grinding noise after startup and when driving off.
When an event occurs that activates AdvanceTrac威 with RSC威 you may
experience the following:
• A slight deceleration of the vehicle
• The “sliding car”
indicator light will flash.
• A vibration in the pedal when your foot is on the brake pedal
• If the driving condition is severe and your foot is not on the brake, the
brake pedal may move as the systems applies higher brake forces. You
may also hear a whoosh of air from under the instrument panel during
this severe condition.
• The brake pedal may feel stiffer than usual.
Traction Control System(TCS)
Traction control is a driver aid feature that helps your vehicle maintain
traction of the wheels, typically when driving on slippery and/or hilly
road surfaces, by detecting and controlling wheel spin.
Excessive wheel spin is controlled in two ways, which may work
separately or in tandem: Engine traction control and brake traction
control. Engine traction control works to limit drive-wheel spin by
momentarily reducing engine power. Brake traction control works to limit
wheel spin by momentarily applying the brakes to the wheel that is
slipping. Traction control is most active at low speeds.
During traction control events the “sliding car” icon
in the instrument
cluster will flash.
If the traction control system is activated excessively in a short period of
time, the braking portion of the system may become temporarily disabled
to allow the brakes to cool down. In this situation, traction control will
use only engine power reduction or transfer to help control the wheels
from over-spinning. When the brakes have cooled down, the system will
regain all features. Anti-lock braking, RSC威, and ESC are not affected by
this condition and will continue to function during the cool-down period.
The engine traction control and brake traction control system may be
deactivated in certain situations. See the Switching Off AdvanceTrac威
with RSC威 section below.
Driving
223
2010 Edge (edg)
Owners Guide, 3rd Printing
USA (fus)
Electronic Stability Control (ESC)
Electronic Stability Control (ESC) may enhance your vehicle’s directional
stability during adverse maneuvers, for example when cornering severely
or avoiding objects in the roadway. ESC operates by applying brakes to
one or more of the wheels individually and, if necessary, reducing engine
power if the system detects that the vehicle is about to skid or slide
laterally.
During ESC events the “sliding car” icon
in the instrument cluster
will flash.
Certain adverse driving maneuvers may activate the ESC system, which
include but are not limited to:
• Taking a turn too fast
• Maneuvering quickly to avoid an accident, pedestrian or obstacle
• Driving over a patch of ice or other slippery surfaces
• Changing lanes on a snow-rutted road
• Entering a snow-free road from a snow-covered side street, or vice
versa
• Entering a paved road from a gravel road, or vice versa
• Cornering while towing a heavily loaded trailer (refer to Trailer
towing in the Tires, Wheels and Loading chapter).
The Electronic Stability Control system may be deactivated in certain
situations. See the Switching Off AdvanceTrac威 with RSC威 section
following.
Roll Stability Control™ (RSC威)
Roll Stability Control™ (RSC威) may help to maintain roll stability of the
vehicle during adverse maneuvers. RSC威 operates by detecting the
vehicle’s roll motion and the rate at which it changes and by applying the
brakes to one or more wheels individually.
During an event that activates RSC威 the “sliding car” icon
in the
instrument cluster will flash.
Certain adverse driving maneuvers may activate the RSC威 system, which
include:
• Emergency lane-change
• Taking a turn too fast
• Quick maneuvering to avoid an accident, pedestrian or obstacle
Driving
224
2010 Edge (edg)
Owners Guide, 3rd Printing
USA (fus)
The RSC威 system may be deactivated in certain situations. See the
Switching Off AdvanceTrac威 with RSC威 section following.
Switching Off AdvanceTrac威 with RSC威
If the vehicle is stuck in snow, mud or sand, and seems to lose engine
power, switching off certain features of the AdvanceTrac威 with RSC威
system may be beneficial because the wheels are allowed to spin. This
will restore full engine power and will enhance momentum through the
obstacle. To switch off the AdvanceTrac威 with RSC威 system press the
AdvanceTrac威 with RSC威 “Off” button. Full features of the AdvanceTrac威
with RSC威 system can be restored by pressing the AdvanceTrac威 with
RSC威 “Off” button again or by turning off and restarting the engine.
If you switch off the AdvanceTrac威 with RSC威 system, the “sliding car”
icon
will illuminate steadily. Pressing the AdvanceTrac威 with RSC威
“Off” button again will turn off the “sliding car” icon
.
In R (Reverse), ABS and the engine traction control and brake traction
control features will continue to function; however, ESC and RSC威 are
disabled.
AdvanceTrac威 with RSC威 Features
Button
functions
“Sliding
car”
icon
RSC威 ESC
Engine
traction
control
Brake
traction
control
Default at
start-up
Illuminated
during
bulb check
Enabled Enabled Enabled Enabled
Button
pressed
momentarily
Illuminated
solid
Disabled
below
38 mph
(60 km/h)
Disabled
below
38 mph
(60 km/h)
Disabled
below
38 mph
(60 km/h)
Enabled
Button
pressed
again after
deactivation
Not
illuminated
Enabled Enabled Enabled Enabled
TRAILER SWAY CONTROL
When properly equipped, trailer sway control will use the vehicle’s
AdvanceTrac威 with RSC威 system to detect and help reduce trailer sway
Driving
225
2010 Edge (edg)
Owners Guide, 3rd Printing
USA (fus)
by applying brake force at individual wheels and, if necessary, by
reducing engine power. Trailer sway control is only enabled above
40 mph (64 km/h).
WARNING: Trailer sway control does not prevent a trailer from
swaying. It mitigates the sway from increasing once it has
occurred. If you are experiencing trailer sway, it is likely that the
trailer is improperly loaded for the correct tongue weight or the speed
of the vehicle and trailer is too high. Pull the vehicle-trailer over to a
safe location to check the trailer weight distribution and tongue load,
and reduce speed to a safe level while towing. If trailer sway is
experienced, SLOW DOWN.
During trailer sway control events, the
icon in the instrument cluster
will flash momentarily. The message center will also display TRAILER
SWAY REDUCE SPEED. In some cases when trailer sway is detected,
the vehicle speed is too high and may be at or above a speed at which
trailer sway will grow continuously. This may cause the system to
activate multiple times, and you may experience a slight deceleration of
the vehicle.
Disabling trailer sway control
Trailer sway control can be disabled during any key cycle. Refer to
Message center in the Instrument Cluster chapter for more information.
Note that even if it was disabled before turning off the vehicle, trailer
sway control will be re-enabled at each new key cycle.
WARNING: Turning off trailer sway control increases the risk of
loss of vehicle control, serious injury, or death. Ford does not
recommend disabling this feature except in situations where speed
reduction may be detrimental (e.g., hill climbing), the driver has
significant trailer towing experience, and can control trailer sway and
maintain safe operation.
STEERING
To help prevent damage to the power steering system:
• Never hold the steering wheel at its furthest turning points (until it
stops) for more than a few seconds when the engine is running.
• Do not operate the vehicle with a low power steering fluid level
(below the MIN mark on the reservoir).
Driving
226
2010 Edge (edg)
Owners Guide, 3rd Printing
USA (fus)
• Some noise is normal during operation. If the noise is excessive, check
for a low power steering fluid level before seeking service by your
authorized dealer.
• Heavy or uneven steering efforts may be caused by a low power
steering fluid level. Check for a low power steering fluid level before
seeking service by your authorized dealer.
• Do not fill the power steering fluid reservoir above the MAX mark on
the reservoir.
If the power steering system breaks down (or if the engine is turned
off), you can steer the vehicle manually, but it takes more effort.
If the steering wanders or pulls, check for:
• An improperly inflated tire
• Uneven tire wear
• Loose or worn suspension components
• Loose or worn steering components
• Improper steering alignment
A high crown in the road or high crosswinds may also make the steering
seem to wander/pull.
BRAKE-SHIFT INTERLOCK
This vehicle is equipped with a brake-shift interlock feature that prevents
the gearshift lever from being moved from P (Park) when the ignition is
in the on position unless the brake pedal is pressed.
If you cannot move the gearshift lever out of P (Park) with ignition in
the on position and the brake pedal pressed, it is possible that a fuse has
blown or the vehicle’s brake lamps are not operating properly. Refer to
Fuses and relays in the Roadside Emergencies chapter.
If the fuse is not blown and the brake lamps are working properly, the
following procedure will allow you to move the gearshift lever from P
(Park):
Driving
227
2010 Edge (edg)
Owners Guide, 3rd Printing
USA (fus)
1. Apply the parking brake, turn the
ignition key to the off position, and
remove the key.
2. Using a screwdriver (or similar
tool), carefully pry off and remove
the chrome trim ring (1) from the
shifter base.
3. Open the storage compartment
lid and carefully pry the trim panel
(2) up from rear attachments on the
storage compartment and disconnect it from the console.
4. Locate the brake shift interlock
lever on the passenger side of the
shifter assembly.
5. Apply the brake pedal. Using a
screwdriver (or similar tool), press
and hold the brake shift interlock
lever while pulling the gearshift
lever out of the P (Park) position
and into the N (Neutral) position.
6. Install the trim panel (2) and
chrome ring (1) in reverse order.
7. Apply brake pedal, start the vehicle, and release the parking brake.
See your authorized dealer as soon as possible if this procedure
is used.
WARNING: Do not drive your vehicle until you verify that the
brakelamps are working.
WARNING: Always set the parking brake fully and make sure
the gearshift is latched in P (Park). Turn the ignition to the off
position and remove the key whenever you leave your vehicle.
WARNING: If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be
working properly. See your authorized dealer.
1
2
Driving
228
2010 Edge (edg)
Owners Guide, 3rd Printing
USA (fus)

Related Topics

Driving
Starting Brakes Transmission operation Reverse sensing system

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot