Get Instrument Cluster Guide for Ford Edge SUV First Generation (2007-2014)

WARNING LIGHTS AND CHIMES

Warning lights and gauges can alert you to a vehicle condition that may

become serious enough to cause extensive repairs. A warning light may

illuminate when a problem exists with one of your vehicle’s functions.

Many lights will illuminate when you start your vehicle to make sure the

bulbs work. If any light remains on after starting the vehicle, refer to the

respective system warning light for additional information.

Service engine soon: The service

engine soon indicator light

illuminates when the ignition is first

turned to the on position to check

the bulb and to indicate whether the vehicle is ready for

Inspection/Maintenance (I/M) testing. Normally, the service engine soon

light will stay on until the engine is cranked, then turn itself off if no

malfunctions are present. However, if after 15 seconds the service engine

soon light blinks eight times, it means that the vehicle is not ready for

I/M testing. See the Readiness for Inspection/Maintenance (I/M)

testing in the Maintenance and Specifications chapter.

Solid illumination after the engine is started indicates the On Board

Diagnostics System (OBD-II) has detected a malfunction. Refer to On

board diagnostics (OBD-II) in the Maintenance and Specifications

chapter. If the light is blinking, engine misfire is occurring which could

damage your catalytic converter. Drive in a moderate fashion (avoid

heavy acceleration and deceleration) and contact your authorized dealer

as soon as possible.

Instrument Cluster

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

WARNING: Under engine misfire conditions, excessive exhaust

temperatures could damage the catalytic converter, the fuel

system, interior floor coverings or other vehicle components, possibly

causing a fire.

Powertrain malfunction/reduced

power: Illuminates when a

powertrain or a AWD fault has been

detected. Contact your authorized

dealer as soon as possible.

Check fuel cap: Illuminates when

the fuel cap may not be properly

installed. Continued driving with

this light on may cause the service

engine soon warning light to come

on, refer to Fuel filler cap in the

Maintenance and Specification chapter.

Brake system warning light: To

confirm the brake system warning

light is functional, it will

momentarily illuminate when the

ignition is turned to the on position

when the engine is not running, or in a position between on and start, or

by applying the parking brake when the ignition is turned to the on

position. If the brake system warning light does not illuminate at this

time, contact your authorized dealer as soon as possible. Illumination

after releasing the parking brake indicates low brake fluid level or a

brake system malfunction. Contact your authorized dealer as soon as

possible.

WARNING: Driving a vehicle with the brake system warning

light on is dangerous. A significant decrease in braking

performance may occur. It will take you longer to stop the vehicle.

Contact your authorized dealer as soon as possible. Driving extended

distances with the parking brake engaged can cause brake failure and

the risk of personal injury.

BRAKE

Instrument Cluster

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

Anti-lock brake system: If the

ABS light stays illuminated or

continues to flash, a malfunction has

been detected. Contact your

authorized dealer as soon as

possible. Normal braking is still functional unless the brake warning light

also is illuminated.

Airbag readiness: If this light fails

to illuminate when the ignition is

turned to on, continues to flash or

remains on, contact your authorized

dealer as soon as possible. A chime will sound when there is a

malfunction in the indicator light.

Safety belt: Reminds you to fasten

your safety belt. A Belt-Minder威

chime will also sound to remind you

to fasten your safety belt. Refer to

the Seating and Safety Restraints

chapter to activate/deactivate the Belt-Minder威 chime feature.

Charging system: Illuminates when

the battery is not charging properly.

If it stays on while the engine is

running, there may be a malfunction

with the charging system. Contact your authorized dealer as soon as

possible. This indicates a problem with the electrical system or a related

component.

Engine oil pressure: Illuminates

when the oil pressure falls below the

normal range, refer to Engine oil in

the Maintenance and

Specifications chapter.

AdvanceTrac威/Traction control

active: Illuminates when the

AdvanceTrac威 /Traction control is

active. If the light remains on,

contact your authorized dealer as

soon as possible. Refer to the

Driving chapter for more information.

ABS

Instrument Cluster

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

Low tire pressure warning (if

equipped): Illuminates when your

tire pressure is low. If the light

remains on at start up or while

driving, the tire pressure should be

checked. Refer to Inflating your tires in the Tires, Wheels and

Loading chapter. When the ignition is first turned to on, the light will

illuminate for 3 seconds to ensure the bulb is working. If the light does

not turn on or begins to flash, contact your authorized dealer as soon as

possible. For more information on this system, refer to Tire pressure

monitoring system (TPMS) in the Tires, Wheels and Loading chapter.

Low fuel (if equipped):

Illuminates when the fuel level in

the fuel tank is at or near empty.

Refer to Fuel gauge in this chapter.

Speed control: Illuminates when

the speed control is engaged. Turns

off when the speed control system

is disengaged.

O/D OFF: Illuminates when the

overdrive function of the

transmission has been turned off;

refer to the Driving chapter. If the

light flashes steadily or does not illuminate, contact your authorized

dealer as soon as possible.

Anti-theft system: Flashes when

the SecuriLock威 Passive Anti-theft

System has been activated.

Door ajar: Illuminates when the

ignition is in the on position and any

door is open.

O/D

OFF

Instrument Cluster

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

Low washer fluid: Illuminates

when the windshield washer fluid is

low.

Turn signal: Illuminates when the

left or right turn signal or the

hazard lights are turned on. If the

indicators flash faster, check for a burned out bulb.

High beams: Illuminates when the

high beam headlamps are turned on.

Key-in-ignition warning chime: Sounds when the key is left in the

ignition in the off or accessory position and the driver’s door is opened.

Headlamps on warning chime: Sounds when the headlamps or parking

lamps are on, the ignition is off (the key is not in the ignition) and the

driver’s door is opened.

Parking brake on chime: Sounds when the parking brake is left on and

the vehicle is driven. If the warning stays on after the park brake is off,

contact your authorized dealer as soon as possible.

Message center activation chime: Sounds when some warning

messages appear in the message center display for the first time.

Overspeed chime (if equipped): Sounds when the vehicle speed

reaches 75 mph (120 km/h) or higher.

Instrument Cluster

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

GAUGES

Speedometer: Indicates the

current vehicle speed.

Engine coolant temperature

gauge: Indicates engine coolant

temperature. At normal operating

temperature, the needle will be in

the normal range (between “H” and

“C”). If it enters the red section,

the engine is overheating. Stop

the vehicle as soon as safely

possible, switch off the engine and let the engine cool.

WARNING: Never remove the coolant reservoir cap while the

engine is running or hot.

Instrument Cluster

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

Fuel gauge: Indicates

approximately how much fuel is left

in the fuel tank (when the ignition

is in the on position). The fuel

gauge may vary slightly when the

vehicle is in motion or on a grade.

The FUEL icon and arrow indicates

which side of the vehicle the fuel

filler door is located.

Refer to Filling the tank in the Maintenance and Specifications

chapter for more information.

Tachometer: Indicates the engine

speed in revolutions per minute.

Driving with your tachometer

pointer continuously at the top of

the scale may damage the engine.

Odometer: Registers the total miles (kilometers) of the vehicle.

• With Mini Message center

• With message center

Refer to Message center in this

chapter on how to switch the

display from Metric to English.

Trip odometer: Registers the miles (kilometers) of individual journeys.

• With mini message center

Tap on the TRIP/RESET stem to

toggle the display between the trip

and the odometer. Press the stem

again to select Trip A and Trip B

features. Holding the TRIP/RESET stem for two seconds or more will

reset the trip odometer.

Instrument Cluster

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

• With message center

See TRIP A/B under Message center

in this chapter.

MINI MESSAGE CENTER (IF EQUIPPED)

Selectable features

Press and release the TRIP/RESET stem to scroll and reset the following

functions. Select or reset the function by holding the TRIP/RESET stem

for more than two seconds.

Info menu

This menu displays the following control displays:

• Odometer

• Trip odometer A or B

• Reverse Park Aid (if equipped)

• Autolamp (if equipped)

Odometer/Trip odometer

Refer to Gauges in the Instrument Cluster chapter.

Note: Engine can not be running to change the state of Autolamp or

Rear Park Assist (when not in Reverse).

Autolamp (if equipped)

This feature keeps your headlights on for up to three minutes after the

ignition is switched off.

1. To disable/enable the autolamp

delay feature, select this function

using TRIP/RESET stem for the

current display mode.

2. Press and hold the TRIP/RESET

stem for two seconds to select the

new Autolamp delay values of 0, 10, 20, 30, 60, 90, 120 or 180 seconds.

Reverse Sensing System (Park assist) (if equipped)

This feature sounds a warning tone to warn the driver of obstacles near

the rear bumper, and functions only when R (Reverse) gear is selected.

Instrument Cluster

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

1. To disable/enable the reverse

sensing system feature, select this

function using the TRIP/RESET

stem or put the vehicle in R

(Reverse).

2. Press and hold the TRIP/RESET stem for two seconds to turn the rear

park assist OFF or ON.

MESSAGE CENTER (IF EQUIPPED)

Your vehicle’s message center is capable of monitoring many vehicle

systems and will alert you to potential vehicle problems and various

conditions with an informational message followed by a long indicator

chime.

The message center display is located in the instrument cluster.

Info

Press INFO repeatedly to cycle

through the following features:

TRIP A/B

Registers the distance of individual journeys. Press and release INFO

until the A or B trip appears in the display (this represents the trip

mode). Press and hold RESET until it resets.

Refer to UNITS later in this section to switch the display from Metric to

English.

MILES (km) TO E

This displays an estimate of approximately how far you can drive with

the fuel remaining in your tank under normal driving conditions.

Remember to turn the ignition off when refueling to allow this feature to

correctly detect the added fuel.

LOW FUEL LEVEL will display when you have approximately 50 miles

(80 km), to empty. Press RESET to clear this warning message. It will

return at approximately 25 miles (40 km), 10 miles (16 km) and 0 miles

(0 km) miles to empty.

Instrument Cluster

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

The distance to empty is calculated using a running average fuel

economy, which is based on your recent driving history of 500 miles

(800 km). This value is not the same as the average fuel economy

display. The running average fuel economy is re-initialized to a factory

default value if the battery is disconnected.

MPG (L/100km)

Average fuel economy displays your average fuel economy in miles/gallon

or liters/100 km.

If you calculate your average fuel economy by dividing distance traveled

by gallons of fuel used (liters of fuel used by 100 kilometers traveled),

your figure may be different than displayed for the following reasons:

• Your vehicle was not perfectly level during fill-up

• Differences in the automatic shut-off points on the fuel pumps at

service stations

• Variations in top-off procedure from one fill-up to another

• Rounding of the displayed values to the nearest 0.1 gallon (liter)

1. Drive the vehicle at least 5 miles (8 km) with the speed control

system engaged to display a stabilized average.

2. Record the highway fuel economy for future reference.

It is important to press the RESET button (press and hold RESET for

two seconds in order to reset the function) after setting the speed

control to get accurate highway fuel economy readings.

For more information refer to Essentials of good fuel economy in the

Maintenance and Specifications chapter.

AVERAGE MPH (km/h)

Displays the vehicle’s average speed. Press and hold RESET to reset

your average speed.

TIME1OR2

Timer displays the trip elapsed drive time.

To operate, do the following:

1. Press and release RESET to start the timer.

2. Press and release RESET to pause the timer.

3. Press and hold RESET until the timer resets.

Instrument Cluster

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

COMPASS

The compass heading is displayed in the message center display.

The compass reading may be affected when you drive near large

buildings, bridges, power lines and powerful broadcast antenna. Magnetic

or metallic objects placed in, on or near the vehicle may also affect

compass accuracy.

Usually, when something affects the compass readings, the compass will

correct itself after a few days of operating your vehicle in normal

conditions. If the compass still appears to be inaccurate, a manual

calibration may be necessary. Refer to Compass zone/calibration

adjustment.

Most geographic areas (zones) have a magnetic north compass point that

varies slightly from the northerly direction on maps. This variation is four

degrees between adjacent zones and will become noticeable as the

vehicle crosses multiple zones. A correct zone setting will eliminate this

error. Do the following to set the proper zone:

Compass zone/calibration adjustment

1. Determine your magnetic zone by

referring to the zone map.

2. Start the engine.

3. Press INFO repeatedly until only

the compass and odometer are

displayed–the top of the message

center must be blank.

Note: If the compass displays CAL

000000.0 mi instead of heading

information, the compass will need

to be calibrated. Slowly drive the

vehicle in a circle (less than 3 mph [5 km/h]) until the CAL indicator

changes to display compass heading. This may take up to three circles to

complete calibration.

4. Press and hold the RESET button until the message center display

prompts you to reset the current zone setting. Press RESET.

5. Press SETUP repeatedly to choose the correct zone setting for your

geographic location. To exit the zone setting mode press and release the

RESET control.

6. The message center will prompt you to press RESET to calibrate or

press INFO to exit. Press RESET to start the compass calibration

function.

123

6 7 8 9 1011

Instrument Cluster

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

7. Slowly drive the vehicle in a circle (less than 3 mph [5 km/h]) until

the CIRCLE SLOWLY TO CALIBRATE display changes to CALIBRATION

COMPLETED. It could take up to five circles to complete calibration.

8. The compass is now calibrated.

System check and vehicle feature customization

Press SETUP repeatedly to cycle

the message center through the

following features:

PRESS RESET FOR SYS CHECK

For each of the monitored systems, the message center will indicate

either an OK message or a warning message for two to four seconds.

Press RESET to cycle through each of the systems being monitored.

The sequence of the system check report is as follows:

1. DOORS CLOSED

2. ENGINE TEMPERATURE

3. OIL PRESSURE

4. BRAKE FLUID LEVEL

5. WASHER FLUID LEVEL

6. FUEL LEVEL

7. DISTANCE TO EMPTY

UNITS

Displays the current units English or Metric.

Press RESET to change from English to Metric.

AUTOLAMP (SEC)

The autolamp delay feature keeps your headlights on for up to three

minutes after the ignition is switched off.

Press RESET to select the new autolamp delay values of 0, 10, 20, 30,

60, 90, 120 or 180 seconds.

AUTOLOCK

This feature automatically locks all vehicle doors when the vehicle is

shifted into any gear, putting the vehicle in motion.

Instrument Cluster

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

Press RESET to turn autolock on or off.

AUTOUNLOCK

This feature automatically unlocks all vehicle doors when the driver’s

door is opened within 10 minutes of the ignition being turned off.

Press RESET to turn autounlock on or off.

POWER LIFTGATE (if equipped)

This feature allows users to open/close the rear liftgate at the touch of a

button.

Press RESET to turn the power liftgate on or off.

EASY ENTRY (if equipped)

This feature automatically moves the driver’s seat backwards for easy

exit/entry from the vehicle.

Press RESET to turn the easy entry/exit seat on or off.

REAR PARK AID (if equipped)

This feature sounds a warning tone to warn the driver of obstacles near

the rear bumper, and functions only when R (Reverse) gear is selected.

Press RESET to turn the rear park assist on or off.

ENGLISH / FRENCH / SPANISH RESET FOR NEW

Allows you to choose in which language the message center will display.

Press RESET to cycle through each of the language choices.

Press and hold RESET for two seconds to set the language choice.

System warnings

System warnings alert you to possible problems or malfunctions in your

vehicle’s operating systems.

In the event of a multiple warning situation, the message center will

cycle the display to show all warnings by displaying each one for four

seconds.

The message center will display the last selected feature if there are no

more warning messages.

Types of messages and warnings:

• Some messages will appear briefly to inform you of something you

may need to take action on or be informed of.

• Some messages will appear once and then again when the vehicle is

restarted.

Instrument Cluster

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

• Some messages will reappear after clearing or being reset if a problem

or condition is still present and needs your attention.

• Some messages can be acknowledged and reset by pressing RESET.

This allows you to use the full message center functionality by clearing

the message.

DRIVER DOOR AJAR — Displayed when the driver’s door is not

completely closed.

PASSENGER DOOR AJAR — Displayed when the passenger side door

is not completely closed.

REAR LEFT DOOR AJAR — Displayed when the rear left door is not

completely closed.

REAR RIGHT DOOR AJAR — Displayed when the rear right door is

not completely closed.

PARK BRAKE ENGAGED — Displayed when the parking brake is set,

the engine is running and the vehicle is driven more than 3 mph

(5 km/h). If the warning stays on after the parking brake is released,

contact your authorized dealer as soon as possible.

FUEL LEVEL LOW — Displayed as an early reminder of a low fuel

condition.

CHECK BRAKE SYSTEM — Displayed when the brake system needs

servicing. If the warning stays on or continues to come on, contact your

authorized dealer as soon as possible.

BRAKE FLUID LEVEL LOW — Indicates the brake fluid level is low

and the brake system should be inspected immediately. Refer to Brake

fluid in the Maintenance and Specifications chapter.

LIFTGATE AJAR — Displayed when the liftgate is not completely

closed.

LOW TIRE PRESSURE — Displayed when one or more tires on your

vehicle have low tire pressure. Refer to Inflating your tires in the Tires,

Wheels and Loading chapter.

TIRE PRESSURE MONITOR FAULT — Displayed when the Tire

Pressure Monitoring System is malfunctioning. If the warning stays on or

continues to come on, contact your authorized dealer as soon as

possible.

Instrument Cluster

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

TIRE PRESSURE SENSOR FAULT — Displayed when a tire pressure

sensor is malfunctioning, or your spare tire is in use. For more

information on how the system operates under these conditions, refer to

Tire Pressure Monitoring System (TPMS) in the Tires, Wheels and

Loading chapter. If the warning stays on or continues to come on,

contact your authorized dealer as soon as possible.

CHECK COMPASS MOD (if equipped) — Displayed when the

compass is not operating properly. If the warning stays on or continues

to come on, contact your authorized dealer as soon as possible.

INTKEY COULD NOT PROGRAM — Displayed when an attempt is

made to program a fifth Integrated Key to the Remote Key Entry

System. For more information on Integrated Key, refer to Locks and

Security chapter in this manual.

Instrument Cluster

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

Instrument Cluster for Your Ford Edge SUV First Generation (2007-2014)

Related Topics

Popular Owner Manuals

Latest Owner Manuals