3. Remove the back cover.
4. Rotate the sealant canister up 90
degrees and pull away from
casing/housing to remove.
Installation of the sealant canister to
the kit
1. With the canister held perpendicular
to the housing, insert the canister
nozzle into the connector and push
until seated.
2. Rotate the canister 90 degrees down
into the housing/casing.
3. Snap the back cover back into place.
4. Wrap the dual purpose hose (black
tube) around the channel on the
bottom of the housing/casing.
5. Wrap the power cord around the
housing and stow the accessory power
plug.
335
2024 Edge (CDQ) Canada/United States of America, enUSA, Edition date: 202306, DOM
Tire Sealant and Inflator Kit (If Equipped)
English 
